The Relationship Between Arthroplasty Surgeons' Experience Level and Optimal Cable Tensioning in the Fixation of Extended Trochanteric Osteotomy

Introduction

In this study, our aim was to examine the relationship between the arthroplasty surgeons’ experience level and their aptitude to adjust the cable tension to the value recommended by the manufacturer when asked to provide fixation with cables in artificial bones that underwent extended trochanteric osteotomy (ETO).

Materials and Methods

A custom-made cable tensioning device with a microvoltmeter was used to measure the tension values in Newtons (N). An ETO was performed on 4 artificial femur bones. Surgeons at various levels of experience attending the IX^th National Arthroplasty Congress were asked to fix the osteotomized fragment using 1.7-mm cables and the tensioning device. The participants’ demographic and experience data were investigated and recorded. The surgeons with different level of experience repeated the tensioning test 3 times and the average of these measurements were recorded.

Results

In 19 (35.2%) of the 54 participants, the force applied to the cable was found to be greater than the 490.33 N (50 kg) value recommended by the manufacturer. No statistically significant difference was determined between the surgeon’s years of experience, the number of cases, and the number of cables used and the tension applied over the recommended maximum value (P = .475, P = .312, and P = .691, respectively).

Conclusions

No significant relationship was found between the arthroplasty surgeon’s level of experience and the adjustment of the cable with the correct tension level. For this reason, we believe that the use of tensioning devices with calibrated tension gauges by orthopedic surgeons would help in reducing the number of complications that may occur due to the cable.

Fabrication of a multi-layered decellularized amniotic membranes as tissue engineering constructs

As a promising approach in tissue engineering, decellularization has become one of the mostly-studied research areas in tissue engineering thanks to its potential to bring about several advantages over synthetic materials since it can provide a 3-dimensional ECM structure with matching biomechanical properties of the target tissue. Amniotic membranes are the tissues that nurture the embryos during labor. Similarly, these materials have also been proposed for tissue regeneration in several applications. The main drawback in using amniotic membranes is the limited thickness of these materials since most tissues require a 3D matrix for an enhance regeneration. In order to prevent this limitation, here we report a facile fabrication methodology for multilayered amniotic membrane-based tissue constructs. The amniotic membranes of Wistar albino rats were first decellularized with the physical and chemical methods and utilized as scaffolds. Secondly, the prepared decellularized membranes were sutured to form a multilayered 3D structure. Within the study, 7 groups including control (PBS), were prepared based on physical and chemical decellularization methods. UV exposure and freezing techniques were used as a physical decellularization methods while hypertonic medium and SDS (sodium dodecyl sulfate) protocols were used as chemical decellularization methods. The combinations of both protocols were also used. In groups, A was the control and group B was applied just UV. In group C was applied UV and freezing. In addition to UV and freezing, in group D was applied hypertonic solution while group E was applied SDS (0.03 %). In group F was applied UV, freezing, hypertonic solution and SDS (0.03 %). In group G was applied UV, hypertonic solution, SDS (0.03 %) and freezing, respectively. Based on the histological and quantitative analyses, F and G groups were found as the most efficient decellularization protocols in rat amniotic membranes. Then, group F and G decellularized amniotic membranes were used to form scaffolds and thus-formed matrices were further characterized in vitro cell culture studies and mechanical tests. Cytotoxicity analyses performed using MTT showed a good cell viability in F and G groups scaffolds. The percentage viability rate was higher in G group (81.3 %) compared to F (75.33 %) and also cell viability in G group was found more meaningful according to p value which was obtained 0.007. Cellular adhesions after in vitro cell culture and morphology of scaffolds were evaluated by scanning electron microscopy (SEM). It was observed that the cells cultivated in equal amounts of tissue scaffolds were higher in the F compared to that observed in group G. The mechanical testing with 40 N force revealed 0.77 mm displacement in group F while it was 0.75 mm in group G. Moreover, according to force-controlled test, 2.9 mm displacement of F group and 1.2 mm displacement of G group was measured. As a result, this study shows that the multilayered decellularized amniotic membrane scaffolds support cell survival and adhesion and can form a flexible biomaterial with desired handling properties.

Knotless anchors offer better prevention of meniscal excursion than knotted anchors: An experimental study of the bovine knee

OBJECTIVE

Due to the biomechanical importance of the meniscal root ligament, several surgical techniques have been defined in order to treat meniscal root tear. Different application techniques have different levels of difficulty. We aimed to find a stronger and simpler repair technique.

METHODS

Sixteen bovine knee joints were prepared. The posterior root of the medial meniscus was dissected and repaired with one of two different techniques. The knees in group 1 ("knotted group") were repaired with the knotted suture anchor technique, and the knees in group 2 ("knotless group") were repaired using the knotless suture anchor technique. The strength of the repairs was tested biomechanically.

RESULTS

Cyclic loading tests were done. On the 0-20 N one-cycle test, the knotted anchor group's equivalent stiffness average was 5.28 N/mm, and the knotless anchor group's equivalent stiffness average was 5.48 N/mm. The 5-20 N two-cycle test results were 8.29 N/mm for the knotted group and 8.66 N/mm for the knotless group. On the 5-20 N 100-cycle test, the equivalent stiffness averages were 8.59 N/mm for the knotted group and 10.18 N/mm for the knotless group. Elongation was 5.83 mm for the knotted group and 4.86 mm for the knotless group. After performing load-to-failure tests, the failure forces were recorded as 237.83 N for the knotted group and 204.90 N for the knotless group. The failure test elongation values were 26.83 mm for the knotted group and 18.70 mm for the knotless group. The failure energies were 3.87 J for the knotted group and 1.83 J for the knotless group. Except for elongation until failure (p=0.009), there were no significant differences between the two groups tested (p>0.05). The average elongation was significantly less in group 2, showing that the knotless anchor had an advantage, with less meniscal excursion compared to the sutured anchor.

CONCLUSION

Knotless anchors have a mechanical advantage over knotted anchors for preventing meniscal excursion. When thought together with technical simplicity during arthroscopic surgery, knotless anchors could be used safely for the fixation of the meniscal root ligament.

3D printed poly(ε-caprolactone) scaffolds modified with hydroxyapatite and poly(propylene fumarate) and their effects on the healing of rabbit femur defects

3D printed, BMSC seeded PCL/HAp/PPF scaffolds presented significant regeneration with high mechanical properties similar to that of healthy bone.

Mechanical design, analysis, and laboratory testing of a dental implant with axial flexibility similar to natural tooth with periodontal ligament

At the interface between the jawbone and the roots of natural teeth, a thin, elastic, shock-absorbing tissue, called the periodontal ligament, forms a cushion which provides certain flexibility under mechanical loading. The dental restorations supported by implants, however, involve comparatively rigid connections to the jawbone. This causes overloading of the implant while bearing functional loading together with neighboring natural teeth, which leads to high stresses within the implant system and in the jawbone. A dental implant, with resilient components in the upper structure (abutment) in order to mimic the mechanical behavior of the periodontal ligament in the axial direction, was designed, analyzed in silico, and produced for mechanical testing. The aims of the design were avoiding high levels of stress, loosening of the abutment connection screw, and soft tissue irritations. The finite element analysis of the designed implant revealed that the elastic abutment yielded a similar axial mobility with the natural tooth while keeping stress in the implant at safe levels. The in vitro mechanical testing of the prototype resulted in similar axial mobility predicted by the analysis and as that of a typical natural tooth. The abutment screw did not loosen under repeated loading and there was no static or fatigue failure.

Non-integer viscoelastic constitutive law to model soft biological tissues to in-vivo indentation

PURPOSE

During the last decades, derivatives and integrals of non-integer orders are being more commonly used for the description of constitutive behavior of various viscoelastic materials including soft biological tissues. Compared to integer order constitutive relations, non-integer order viscoelastic material models of soft biological tissues are capable of capturing a wider range of viscoelastic behavior obtained from experiments. Although integer order models may yield comparably accurate results, non-integer order material models have less number of parameters to be identified in addition to description of an intermediate material that can monotonically and continuously be adjusted in between an ideal elastic solid and an ideal viscous fluid.

METHODS

In this work, starting with some preliminaries on non-integer (fractional) calculus, the "spring-pot", (intermediate mechanical element between a solid and a fluid), non-integer order three element (Zener) solid model, finally a user-defined large strain non-integer order viscoelastic constitutive model was constructed to be used in finite element simulations. Using the constitutive equation developed, by utilizing inverse finite element method and in vivo indentation experiments, soft tissue material identification was performed.

RESULTS

The results indicate that material coefficients obtained from relaxation experiments, when optimized with creep experimental data could simulate relaxation, creep and cyclic loading and unloading experiments accurately.

CONCLUSIONS

Non-integer calculus viscoelastic constitutive models, having physical interpretation and modeling experimental data accurately is a good alternative to classical phenomenological viscoelastic constitutive equations.

Ankle clonus and its relationship with the medium-latency reflex response of the soleus by peroneal nerve stimulation

Ankle clonus and soleus medium-latency reflex are stretch-induced responses. Clonus is traditionally considered to be the result of oscillation in the group Ia mediated spinal stretch reflex but the soleus medium-latency reflex response originates mainly from the activation of group II afferents. The medium latency reflex response (MLR) was recorded in soleus muscle by peroneal nerve stimulation and clonus beats were recorded in soleus muscle using EMG in 19 spastic patients. The dorsiflexion (DF) and plantarflexion (PF) times of clonus and the half-period were calculated based on accelerometric measurements in 11 patients. The MLR of the soleus was 73.63 ± 8.9 ms. The half-period of the clonus was 79.34 ± 12.31 ms. The difference between the MLR and half-period was significant. The PF was 71.75 ± 6.73 ms, and the DF was 88.63 ± 10.83 ms. The difference between the soleus MLR and PF part of the clonus beat was not significant. The PF part of the clonus beat is due to soleus muscle contraction and controlled by the neural part of the oscillation. There may be relationship between the soleus MLR and the PF part of the clonus. Clonus is considered to be the result of oscillations in the group Ia spinal stretch reflex, but there is sufficient time for group II afferents to be involved.

Dynamic function of the fibula. Gait analysis evaluation of three different parts of the shank after fibulectomy: proximal, middle and distal

The purpose of this case study was to investigate the dynamic features of fibular movement to gait pattern by analyzing the gait of individuals with three different parts of the fibula resected. Gait analyses revealed that proximal fibula resection impaired knee stability, whereas distal fibula resection disturbed ankle kinematics significantly. Except a mild secondary quadriceps weakness, middle fibula resection did not cause a significant biomechanical disturbance on gait.

Accuracy of a manual torque application device for morse-taper implants: a technical note

PURPOSE

The objective of this study was to compare torques applied by new and used manual torque devices for Morse-taper implants.

MATERIAL AND METHODS

Fifteen ITI manual torque devices were tested. Those in group 1 (n = 5) were new (ie, never used), those in group 2 (n = 5) had been used 50 to 200 times, and those in group 3 (n = 5) had been used 500 to 1,000 times. The torques applied by each device were measured for 35 Ncm and 15 Ncm targets in an experimental setup by a custom-made wrench with strain gauges connected to a data acquisition system. The strain-gauge signals were simultaneously delivered to a computer at a sample rate of 10,000 Hz and converted to torque units.

RESULTS

New devices applied higher torques than used devices for the 35-Ncm torque target (P < .05). The torques applied by group 3 devices were approximately 1.5 Ncm lower than those of other groups for the 35-Ncm target and approximately 1 Ncm lower for the 15-Ncm target.

DISCUSSION AND CONCLUSION

ITI manual torque devices deliver consistent torque output, although a slight decrease occurs as a consequence of clinical use.

An anatomical study of the meniscofibular ligament

We examined the anatomical structure of a ligament (ligamentum meniscofibulare) between apex fibulae and lateral meniscus by macroscopic and microscopic dissection and transillumination method in 50 knees of 25 cadavers (5 were fresh). We analyzed the function of this ligament, which runs between the head of the fibulae and lateral meniscus. The existence of a connection between knee joint and proximal tibiofibular joint was demonstrated by injecting colored liquid into the knee joint space and transillumination. The mensicofibular ligament is a capsular ligament originating from the lateral meniscus that is anterior to the popliteal muscle tendon. The meniscofibular ligament, which is attached to fibula with rotatory motion at one end and to the lateral meniscus at the other, is believed to position the lateral meniscus and therefore to play a key role in the knee joint.

Nonlinear Viscoelastic Material Property Estimation of Lower Extremity Residual Limb Tissues

Axisymmetric nonlinear finite-element analysis was used to simulate force-relaxation and creep data obtained during in vivo indentation of the residual limb soft tissues of six individuals with trans-tibial amputation [1]. The finite-element models facilitated estimation of an appropriate set of nonlinear viscoelastic material coefficients of extended James-Green-Simpson material formulation for bulk soft tissue at discrete, clinically relevant test locations. The results indicate that over 90% of the experimental data can be simulated using the two-term viscoelastic Prony series extension of James-Green-Simpson material formulation. This phenomenological material formulation could not, however, predict the creep response from relaxation experiments, nor the relaxation response from creep experiments [2–5]. The estimated material coefficients varied with test location and subject indicating that these coefficients cannot be readily extrapolated to other sites or individuals.

Nonlinear elastic material property estimation of lower extremity residual limb tissues

The interface stresses between the residual limb and prosthetic socket have been studied to investigate prosthetic fit. Finite-element models of the residual limb-prosthetic socket interface facilitate investigation of the mechanical interface and may serve as a potential tool for future prosthetic socket design. However, the success of such residual limb models to date has been limited, in large part due to inadequate material formulations used to approximate the mechanical behavior of residual limb soft tissues. Nonlinear finite-element analysis was used to simulate force-displacement data obtained during in vivo rate-controlled (1, 5, and 10 mm/s) cyclic indentation of the residual limb soft tissues of seven individuals with transtibial amputation. The finite-element models facilitated determination of an appropriate set of nonlinear elastic material coefficients for bulk soft tissue at discrete clinically relevant test locations. Axisymmetric finite-element models of the residual limb bulk soft tissue in the vicinity of the test location, the socket wall and the indentor tip were developed incorporating contact analysis, large displacement, and large strain, and the James-Green-Simpson nonlinear elastic material formulation. Model dimensions were based on medical imaging studies of the residual limbs. The material coefficients were selected such that the normalized sum of square error (NSSE) between the experimental and finite-element model indentor tip reaction force was minimized. A total of 95% of the experimental data were simulated using the James-Green-Simpson material formulation with an NSSE less than 5%. The respective James-Green-Simpson material coefficients varied with subject, test location, and indentation rate. Therefore, these coefficients cannot be readily extrapolated to other sites or individuals, or to the same site and individual some time after testing.