Resorcinol-Derived Vitrimers and Their Flax Fiber-Reinforced Composites Based on Fast Siloxane Exchange

Natural fiber-reinforced composites are gaining increased interest for their significantly reduced carbon footprint compared to conventional glass or carbon fiber-based counterparts. In this study, natural fibers are used in a resorcinol-based epoxy resin that is thermally reshapable at higher temperatures (>180 °C) by using fast exchanging siloxane bonds, catalyzed by 1,5,7-triazabicyclo[4.4.0]dec-5-ene. Stress relaxation times of only about 6 s at 220 °C can be reached. A resorcinol-based epoxy compound is selected because it can be derived from cellulose, opening ways for more sustainable and reshapable composite materials. In a last step of the research, the low viscosity vitrimer formulation (<200 mPa s) is applied to make a flax fiber-reinforced composite using an industrially relevant vacuum-assisted resin infusion process. A section of this composite is successfully reshaped, which allows for envisioning a second life for natural fiber-reinforced composites.

Rewritable Macromolecular Data Storage with Automated Read-out

Rewriting data stored on synthetic macromolecules is an interesting feature, even though it is considered as being quite challenging within the area of digital macromolecules. In this context, we initially studied a strategy for modifying the position tag of sequence-encoded macromolecules in a reversible manner. The efficiency of this method, which relies on the orthogonal cleavage of a thioester moiety via aminolysis, was demonstrated by modifying parts of an exemplary sentence. Simultaneously, a novel algorithm was developed to ease the read-out of macromolecular information by means of MS/MS techniques. This program, Oligoreader, can identify potential information-containing macromolecules from a series of MS¹ spectra, analyze the corresponding MS² spectra, and finally decode the data. Consequently, the algorithm simplifies the entire read-out process by avoiding any interference from the operator, which increases the potential for blind sequencing of uniform macromolecules.

Combining vinylogous urethane and β-amino ester chemistry for dynamic material design

This study combines vinylogous urethane (VU) and beta-amino ester chemistry for the synthesis of covalent adaptable networks (CANs). The resulting CANs are synthesised using a range of diacetoacetates and commercially...

Uniform soluble support for the large-scale synthesis of sequence-defined macromolecules

A monodisperse soluble support is used as an effective tool for the large-scale, liquid-phase synthesis of sequence-defined macromolecules. This uniform support allows for direct characterisation and leads to a single peak in mass spectrometry.

Discrete, self-immolative N-substituted oligourethanes and their use as molecular tags

The depolymerization of N-substituted oligourethanes via an intramolecular cyclization event was studied in-depth, while the applicability of these macromolecules as anti-counterfeiting tags was demonstrated by labeling a polyurethane material.

Sequence-Encoded Macromolecules with Increased Data Storage Capacity through a Thiol-Epoxy Reaction

Sequence-encoded oligo(thioether urethane)s with two different coding monomers per backbone unit were prepared via a solid phase, two-step iterative protocol based on thiolactone chemistry. The first step of the synthetic cycle consists of the thiolactone ring opening with a primary amine, whereby the in situ released thiol is immediately reacted with an epoxide. In the second step, the thiolactone group is reinstalled to initiate the next cycle. This strategy allows to introduce two different coding monomers per synthetic cycle, rendering the resulting macromolecules especially attractive in the area of (macro)molecular data storage because of their increased data storage capacity. Subsequently, the efficiency of the herein reported synthesis route and the applicability of the dual-encoded sequence-defined macromolecules as a potential data storage platform have been demonstrated by unraveling the exact monomer order using tandem mass spectrometry techniques.

Applications of Discrete Synthetic Macromolecules in Life and Materials Science: Recent and Future Trends

In the last decade, the field of sequence-defined polymers and related ultraprecise, monodisperse synthetic macromolecules has grown exponentially. In the early stage, mainly articles or reviews dedicated to the development of synthetic routes toward their preparation have been published. Nowadays, those synthetic methodologies, combined with the elucidation of the structure-property relationships, allow envisioning many promising applications. Consequently, in the past 3 years, application-oriented papers based on discrete synthetic macromolecules emerged. Hence, material science applications such as macromolecular data storage and encryption, self-assembly of discrete structures and foldamers have been the object of many fascinating studies. Moreover, in the area of life sciences, such structures have also been the focus of numerous research studies. Here, it is aimed to highlight these recent applications and to give the reader a critical overview of the future trends in this area of research.

Substituent effect on the thermophysical properties and thermal dissociation behaviour of 9-substituted anthracene derivatives

The chemical structure and location of substituents on anthracene derivatives influence the electron balance of the aromatic system, thus determining the wavelengths at which light is absorbed, which results in the photochemically induced dimerization or monomerization. Here, the thermal dissociation kinetics of 7 photodimers of 9-substituted anthracene derivatives are studied using a combination of spectroscopic and calorimetric techniques in the condensed state and compared to scarce literature data on thermal dissociation of other anthracene derivatives. The length and chemical structure of the substituent chains have a clear impact on the melting temperatures of the anthracene derivatives and corresponding photodimers. The crystallinity of the photodimers and monomers in turn influences the thermal dissociation kinetics. The thermal dissociation behaviour and previously published photochemistry data are related to the electronic effects of the substituents by means of the Hammett parameters. Stronger electron-withdrawing effects result in larger red shifts of the maximum wavelength λmax for the photodimerization of the anthracene derivatives. It is also shown that for the studied substitutions on the 9-position of anthracene, the higher the magnitude of the electronic effect - both electron-donating and electron-withdrawing - the faster the thermal dissociation kinetics and thus the lower the thermal stability. The strong electronic effects of the substituents on the thermal and photochemical reactivity of the anthracene derivatives and their photodimers allow tuning of the thermal or photochemical responsiveness, e.g. for polymer networks.

Analysis of sequence-defined oligomers through Advanced Polymer Chromatography™ - mass spectrometry hyphenation

In recent years, sequence-defined oligomers have attracted increasing interest in the polymer community and the number of new applications such as macromolecular data storage and encryption is increasing. However, techniques allowing sequence differentiation are still lacking. In this study, the focus is put towards a new strategy allowing structural distinction between sequence-defined oligomers with identical molecular weight and composition, but bearing different sequences. This technique relies on the hyphenation of size exclusion chromatography and mass spectrometry, coupled with ion mobility separation. This approach allows for a quick and easy separation and identification of oligomers with different length and/or sequence.

The hyphenation of SEC and MS coupled with IMS allows for a quick and easy separation and identification of oligomers with different length and/or sequence.

Thermal dissociation of anthracene photodimers in the condensed state: kinetic evaluation and complex phase behaviour

Thermally and photochemically reversible functional groups, such as photodimers of anthracene derivatives, offer interesting stimuli-responsive behaviour. To evaluate their potential for application in reversible polymer networks, accurate kinetic parameters and knowledge of their thermophysical behaviour are required. Accurate kinetic studies of the thermal dissociation of the photodimers in the condensed state, thus without the influence of solvents on their reactivity, is still lacking. A methodology was set up to accurately evaluate the chemical reaction kinetics and complex phase behaviour during the thermal dissociation of photodimers into their corresponding monomers. Temperature-controlled time-resolved FTIR spectroscopy was used to determine the reaction progress, while non-isothermal DSC measurements were used to study the thermophysical changes, resulting from the thermal dissociation reaction. The thermal dissociation behaviour in the condensed state is more challenging than in the solution state due to the crystallinity of the dimers, stabilizing the dimers and thus slowing down the initial dissociation rates. Distinctly different sets of kinetic parameters were found for the dissociation from the molten and the crystalline state. For experiments performed below the melting temperature of the photodimer, the reaction rate changes abruptly as the dimer is partly dissociated and partly dissolved into the formed monomer. This methodology provides an accurate assessment of the reaction kinetics with detailed knowledge about the complex phase behaviour of the mixture of the anthracene photodimer and monomer during thermal dissociation.

Exploration of the Selectivity and Retention Behavior of Alternative Polyacrylamides in Temperature Responsive Liquid Chromatography

Temperature responsive liquid chromatography (TRLC) allows for separation of organic solutes in purely aqueous mobile phases whereby retention is controlled through temperature. The vast majority of the work has thus far been performed on poly[N-isopropylacrylamide] (PNIPAAm)-based columns, while the performance of other temperature responsive polymers has rarely been compared under identical conditions. Therefore, in this work, two novel TRLC phases based on poly[N-n-propylacrylamide] (PNNPAAm) and poly[N,N-diethylacrylamide] (PDEAAm) are reported and compared to the state of the art PNIPAAm based column. Optimal comparison is thereby obtained by the use of controlled radical polymerizations, identical molecular weights, and by maximizing carbon loads on the silica supporting material. Analysis of identical test mixtures of homologue series and pharmaceutical samples revealed that PNNPAAm performs in a similar way as PNIPAAm while offering enhanced retention and a shift of the useable temperature range toward lower temperatures. PDEAAm offers a range of novel possibilities as it depicts a different selectivity, allowing for enhanced resolution in TRLC in, for example, coupled column systems. Reduced plate heights of 3 could be obtained on the homemade columns, offering the promise for reasonable column efficiencies in TRLC despite the use of bulky polymers as stationary phases in HPLC.

Introduction to chemistry for covalent adaptable networks

Christopher Bowman, Filip Du Prez and Julia Kalow introduce the Polymer Chemistry themed collection on chemistry for covalent adaptable networks.

Double-Modified Glycopolymers from Thiolactones to Modulate Lectin Selectivity and Affinity

Multivalent glycomaterials show high affinity toward lectins but are often nonselective as they lack the precise 3-D presentation found in native glycans. Here, thiolactone chemistry is exploited to enable the synthesis of glycopolymers with both a primary binding (galactose) and a variable secondary binding unit in close proximity to each other on the linker. These polymers are used to target the Cholera toxin B subunit, CTxB, inspired by its native branched glycan target, GM-1. The secondary, nonbinding unit was shown to dramatically modulate affinity and selectivity toward the Cholera toxin. These increasingly complex glycopolymers, assembled using accessible chemistry, can help breach the synthetic/biological divide to obtain future glycomimetics.

Multifunctional sequence-defined macromolecules for chemical data storage

Sequence-defined macromolecules consist of a defined chain length (single mass), end-groups, composition and topology and prove promising in application fields such as anti-counterfeiting, biological mimicking and data storage. Here we show the potential use of multifunctional sequence-defined macromolecules as a storage medium. As a proof-of-principle, we describe how short text fragments (human-readable data) and QR codes (machine-readable data) are encoded as a collection of oligomers and how the original data can be reconstructed. The amide-urethane containing oligomers are generated using an automated protecting-group free, two-step iterative protocol based on thiolactone chemistry. Tandem mass spectrometry techniques have been explored to provide detailed analysis of the oligomer sequences. We have developed the generic software tools Chemcoder for encoding/decoding binary data as a collection of multifunctional macromolecules and Chemreader for reconstructing oligomer sequences from mass spectra to automate the process of chemical writing and reading.

Enhancing the Possibilities of Comprehensive Two-Dimensional Liquid Chromatography through Hyphenation of Purely Aqueous Temperature-Responsive and Reversed-Phase Liquid Chromatography

Comprehensive two-dimensional liquid chromatography (LC × LC) allows for substantial gains in theoretical peak capacity in the field of liquid chromatography. However, in practice, theoretical performance is rarely achieved due to a combination of undersampling, orthogonality, and refocusing issues prevalent in many LC × LC applications. This is intricately linked to the column dimensions, flow rates, and mobile-phase compositions used, where, in many cases, incompatible or strong solvents are introduced in the second-dimension (²D) column, leading to peak broadening and the need for more complex interfacing approaches. In this contribution, the combination of temperature-responsive (TR) and reversed-phase (RP) LC is demonstrated, which, due to the purely aqueous mobile phase used in TRLC, allows for complete and more generic refocusing of organic solutes prior to the second-dimension RP separation using a conventional 10-port valve interface. Thus far, this was only possible when combining other purely aqueous modes such as ion exchange or gel filtration chromatography with RPLC, techniques which are limited to the analysis of charged or high MW solutes, respectively. This novel TRLC × RPLC combination relaxes undersampling constraints and complete refocusing and therefore offers novel possibilities in the field of LC × LC including temperature modulation. The concept is illustrated through the TRLC × RPLC analysis of mixtures of neutral organic solutes.

Precisely Alternating Functionalized Polyampholytes Prepared in a Single Pot from Sustainable Thiolactone Building Blocks

Polyampholytes with precisely alternating cationic and anionic functional groups were prepared using sustainable thiolactone building blocks in a simple one-pot procedure at room temperature and in water. Ring opening of the N-maleamic acid-functionalized homocysteine thiolactone monomer enabled the introduction of different functional groups into the polymer chain, which contributed to both ionic and hydrogen bonding interactions. The resulting polyampholytes exhibited various isoelectric points while maintaining high solubility in water under different pH and ionic strengths, which expands their potential applications. Finally, it is shown that the upper critical solution temperature (UCST) of these alternating polyampholytes in water/ethanol (30/70% vol) solutions can be tuned as a function of the content of ionic and hydroxyl groups.

Preparation of Janus nanoparticles from block copolymer thin films using triazolinedione chemistry

A nanostructured thin film obtained from a polystyrene-block-poly(4-vinylpyridine) diblock copolymer was used as a template to produce Janus-type nanoparticles via triazolinedione-ene click chemistry.

Melamine-Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy

A systematic study has been carried out to compare the surface morphology, shell thickness, mechanical properties, and binding behavior of melamine-formaldehyde microcapsules of 5-30 μm diameter size with various amounts of core content by using scanning and transmission electron microscopy including electron tomography, in situ nanomechanical tensile testing, and electron energy-loss spectroscopy. It is found that porosities are present on the outside surface of the capsule shell, but not on the inner surface of the shell. Nanomechanical tensile tests on the capsule shells reveal that Young's modulus of the shell material is higher than that of bulk melamine-formaldehyde and that the shells exhibit a larger fracture strain compared with the bulk. Core-loss elemental analysis of microcapsules embedded in epoxy indicates that during the curing process, the microcapsule-matrix interface remains uniform and the epoxy matrix penetrates into the surface micro-porosities of the capsule shells.

Click reactive microgels as a strategy towards chemically injectable hydrogels

Doubly crosslinked microgels (DX microgels) are hydrogels constructed by covalently interlinked microgel particles, offering two levels of hierarchy within the network, the first one being the microgel and the second being the interlinked microgel network.

Comparison of metal free polymer–dye conjugation strategies in protic solvents

Introducing the TAD chemistry to the field of polymer–dye conjugations to broaden the toolbox of metal- and additive-free linking methods.

Deconvolution of overlapping spectral polymer signals in size exclusion separation-diode array detection separations by implementing a multivariate curve resolution method optimized by alternating least square

Peaks eluting from a size exclusion separation (SEC) are often not completely baseline-separated due to the inherent dispersity of the polymer. Lowering the flow rate is sometimes a solution to obtain a better physical separation, but results in a longer retention time, which is often not desirable. The chemometrical deconvolution method discussed in this work provides the possibility of calculating the contribution of each peak separately in the total chromatogram of overlapping peaks. An in-house-developed MATLAB script differentiates between compounds based on their difference in UV-spectrum and retention time, using the entire 3D retention time UV-spectrum. Consequently, the output of the script offers the calculated chromatograms of the separate compounds as well as their respective UV-spectrum, of which the latter can be used for peak identification. This approach is of interest to quantitate contributions of different polymer types with overlapping UV-spectra and retention times, as is often the case in, for example, copolymer or polymer blend analysis. The applicability has been proven on mixtures of different polymer types: polystyrene, poly(methyl methacrylate) and poly(ethoxyethyl acrylate). This paper demonstrates that both qualitative and quantitative analyses are possible after deconvolution and that alternating concentrations of adjacent peaks do not significantly influence the obtained accuracy.