Clinical outcomes of single-bundle versus double-bundle ACL reconstruction in adolescent elite athletes: A retrospective comparative study

OBJECTIVE

The aim of the study was to evaluate the single bundle (SB) and double bundle (DB) anterior cruciate ligament (ACL) reconstruction in terms of graft survival, complications, and patient reported functional outcomes in adolescent athletes.

METHODS

In this retrospective study, 89 elite adolescent athletes who underwent either SB or DB ACL reconstruction were included. All patients were then divided into two groups: group 1 including 51 patients with SB ACL reconstruction (31 male, 20 female; mean age = 15.4 ± 1.03 years) and group 2 including 38 patients with DB ACL (30 male, 8 female; mean age = 15.7 ± 1.3 years). Clinical data were obtained, comprising skeletal maturity, sports type, ACL reconstruction technique, Lachman scores, KT-1000™ arthrometer measurement, additional meniscal procedures as well as International Knee Documentation Committee (IKDC) score, Cincinnati score, and graft size.

RESULTS

The mean follow-up period was 53.1 ± 8.6 months in group 1 and 46.4± 9.1 months in group 2 (P = 0.61). The type of ACL reconstruction technique (SB or DB), gender, skeletal maturity, sports type, additional meniscal procedures and Lachman scores were not associated with the re-rupture of the ACL (P > 0.05). Moreover, ACL reconstruction technique did not effect the rate of re-rupture of an ACL. There were 21 re-ruptures (23.5%) and 11 (12.3%) contralateral ACL ruptures in total. Among 21 reruptures, 12 of them were in the DB group while nine of them in the SB group (P > 0.05). The groups did not differ with respect to age, the injured side, the time from injury to surgery, the postoperative follow-up time, or the preoperative physical examination results KT-1000 device (SSD), Cincinnati score, IKDC objective and subjective score,Lachman test and pivot-shift test).

CONCLUSION

There are no differences in the re-rupture of an ACL, patient reported outcomes, and complications in adolescent elite players, when either an SB or DB technique is performed.

LEVEL OF EVIDENCE

Level III, Therapeuthic Study.

Onlay fibula autografting technique and its comparison with cortical allograft for the reconstruction of periprosthetic bone defects around the femur

BACKGROUND

Bone defect around the femur related to revisions or periprosthetic fractures (PFF) is an issue. We present a bone defect reconstruction technique in femoral revisions and/or PFF using fibula autograft and compared our radiological and clinical results to that of allograft.

METHODS

A total of 53 patients who underwent revision hip arthroplasty and/or PFF fixation with the use of cortical fibula autograft (FG group) or cortical allograft (CG group) were evaluated. After exclusions, 20 patients who had minimum two years of follow-up were investigated for each group, for their radiological and clinical outcomes.

RESULTS

In FG and CG groups, the median ages were 69.5(44-90) and 62(38-88) years, follow-ups were 59(28-72) and 120(48-216) months, defect lengths were seven (1-10) and ten (1-17) cm, and grafts lengths were 16.5(10-30) and 20(12-37) cm, respectively. The rate of graft incorporation was 90% in each group and median time to incorporations were seven (4-12) and 12(6-24) months (p < 0.001), and graft resorption (moderate and severe) rates were 10% and 25% (p = 0.41), respectively. Median Harris Hip (77.6 vs 78.0), WOMAC (23.2 vs 22), SF-12 physical (50.0 vs 46.1), and SF-12 mental (53.8 vs 52.5) scores were similar between the groups, respectively. Kaplan-Meier survivorship analyses revealed an estimated mean survival of 100% at six years in FG group and 90% at 14 years in CG group.

CONCLUSION

In the reconstruction of periprosthetic bone defects after femoral revision or PPF, onlay cortical fibula autografts provide comparable clinical and radiological outcomes to allografts. Its incorporation is faster, it is cost-effective and easy to obtain without apparent morbidity.

Tapered stems one-third proximally coated have higher complication rates than cylindrical two-third coated stems in patients with high hip dislocation undergoing total hip arthroplasty with step-cut shortening osteotomy

BACKGROUND

The results of cementless stems in total hip arthroplasty (THA) done because of congenital dislocation with step-cut osteotomy is not well known, particularly the influence of the design and the role of extent of porous coating. Therefore we performed a retrospective study to evaluate the mid to long-term results THA performed with a single type acetabular component and different geometry and fixation type stems with ceramic bearings in the setting of step-cut subtrochanteric osteotomy in high hip dislocated (HHD) patients. We asked if the stem type affect the outcomes in terms of (1) intra and postoperative complication rates (2) radiographic outcomes (3) prosthesis survival in step-cut subtrochanteric shortening osteotomy.

HYPOTHESIS

The type of the stem, whether cylindrical or tapered does not affect the outcome if the femoral canal fit and fill is obtained and the step-cut femoral shortening osteotomy is primarily fixed.

MATERIALS AND METHODS

Forty-five hips in 35 patients with a mean follow up of 10 years (range, 7-14 years) were evaluated. The single type cementless cup was placed at the level of the true acetabulum, a step-cut shortening femoral osteotomy was performed and reconstruction was performed with two different types of tapered stem in twenty-two hips (Synergy™ and Image™ proximally coated, Smith and Nephew, Menphis, TN, USA) and one type of cylindrical stem (Echelon™ with 2/3 coated, Smith and Nephew, Menphis, TN, USA) in twenty-three hips. Harris hip scores (HHS) and a University of California Los Angeles (UCLA) activity scores were calculated for all patients and successive X-rays were evaluated regarding component loosening and osteolysis, along with complications related to bearing, step-cut osteotomy and stem types.

RESULTS

Forty-one hips (91%) had good and excellent clinical outcome according to HHS. The mean UCLA activity scores improved from 3.2±0.6 points (range, 2-4) preoperatively to 6.3 points±0.5 (range, 5-7) at the latest follow-up. The mean femoral shortening was 36±10mm (range, 20-65mm). Four (9%) dislocations were observed. There were five (11%) intra-operative femoral fractures and three (7%) cases of non-union, which were observed in tapered stems. Cylindrical stems had superior neutral alignment primarily. With any stem revision as the end point, cylindrical stems had a higher survival rate (100%) than all tapered stems (82%; 95% confident interval [CI] 77-97%) at ten years. With any revision as the end point, the 10-year survival rate for acetabular component (Reflection-Ceramic Interfit) and for femoral components were 98% (95% CI, 85-99%) and 91% (95% CI, 78-97%), respectively.

CONCLUSIONS

There were more implant related complications in HHD patients undergoing THA when tapered stems with 1/3 proximal coating were used to reconstruct a step cut osteotomized femur, compared to cylindrical stems 2/3 coated.

LEVEL OF EVIDENCE

IV, retrospective study.

Oxidized zirconium on ceramic; Catastrophic coupling

Oxidized zirconium (Oxinium™; Smith & Nephew, Memphis, TN, USA) articulated with polyethylene in total hip arthroplasty (THA) appeared to have the potential to reduce wear dramatically. The thermally oxidized metal zirconium surface is transformed into ceramic-like hard surface that is resistant to abrasion. The exposure of soft zirconium metal under hard coverage surface after the damage of oxidized zirconium femoral head has been described. It occurred following joint dislocation or in situ succeeding disengagement of polyethylene liner. We reported three cases of misuse of Oxinium™ (Smith & Nephew, Memphis, TN, USA) heads. These three cases resulted in catastrophic in situ wear and inevitable failure although there was no advice, indication or recommendation for this use from the manufacturer.

Treatment of infected nonunion of the juxta-articular region of the distal tibia

OBJECTIVE

The purpose of this study was to summarize our clinical results with distraction osteogenesis for the treatment of infected tibial nonunion around the ankle joint.

METHODS

Between 1994 and 2009, 13 patients with a mean age of 50 years (range: 27-79 years) underwent tibial reconstruction for the treatment of infected nonunion of the distal tibia, with a mean bone loss of 4.8 cm (range: 1-7 cm). Lengthening over an intramedullary nail as a second procedure was used in 2 patients, bifocal compression and distraction technique in 5 cases, compression with Ilizarov external fixator in 5 cases, and Taylor Spatial Frame (TSF, Smith Nephew, Memphis, TN, USA) in 1 case. At final follow-up, functional and radiographic results were evaluated according to Paley's bone and functional healing criteria.

RESULTS

Mean duration of follow-up was 36 months. Mean external fixation time was 198 days, and mean external fixation index was 29 days/cm. According to Paley's bone healing criteria, there were 10 excellent, 2 good, and 1 poor result(s); additionally, according to Paley's functional healing criteria, there were 5 excellent, 6 good, and 2 fair results. There were 11 problems, 5 obstacles, and 1 sequel according to Paley's classification of complications. There was 1 persisting nonunion, which underwent revision with a retrograde intramedullary nail.

CONCLUSION

External fixator and/or combined treatment are effective and reliable methods to treat infected nonunion of the distal tibia. Every patient should be evaluated according to their infection level and bony defects for reconstruction.

Biomechanical comparison of oblique and step-cut osteotomies used in total hip arthroplasty with femoral shortening

BACKGROUND

Various types of shortening osteotomies and prosthesis are used for femoral reconstruction in total hip arthroplasty of the high hip dislocation. This biomechanical study investigates whether step-cut osteotomies result in better stability than oblique osteotomies and cylindrical femoral stems enhance stability of the osteotomy more than conical stems, and which osteotomy and prosthesis type maintain the stability better after cyclical loading.

METHODS

Oblique and step-cut shortening osteotomies were compared under axial and rotational forces, using synthetic femur models and conical or cylindrical femoral prostheses. The models underwent cyclic loading for 10,000 cycles at 3 Hz (100-1000 N axial bending or 0.5-10 Nm torque). After the completion of cyclic loading, the models were loaded until failure. Stiffness values before and after cyclical loading, and failure loads were the outcome parameters. Relative displacements at the osteotomy sites were also measured using 3-Dimensions Digital Imaging Correlation System.

RESULTS

The mean failure load was significantly higher in conical prosthesis groups under axial forces. In torsion tests, the mean stiffness of conical prosthesis groups after cyclical loading was higher in oblique osteotomies. The other parameters were similar between the groups.

CONCLUSIONS

According to the results of the study, although some individual statistically significant parameters were obtained, step-cut osteotomies, which are technically challenging procedures, were not found biomechanically superior to oblique osteotomies, with neither conical nor cylindrical prostheses.

A novel [Mn2(μ-(C6H5)2CHCOO)2(bipy)4](bipy)(ClO4)2 complex loaded solid lipid nanoparticles: synthesis, characterization and in vitro cytotoxicity on MCF-7 breast cancer cells

Manganese (Mn)-based complexes have been drawing attention due to the fact that they are more effective than other metal complexes. However, the use of Mn(II)-based complexes in medicine remains limited because of certain side effects. The aim of this study was to investigate the cytotoxic and apoptotic effects of a novel Mn(II) complex [Mn₂(μ-(C₆H₅)₂CHCOO)₂(bipy)₄](bipy)(ClO₄)₂ and Mn(II) complex loaded solid lipid nanoparticles (SLNs) on MCF-7 and HUVEC control cells. The average diameter of Mn(II) complex was about 1120 ± 2.43 nm, while the average particle size of Mn(II) complex-SLNs was ∼340 ± 2.27 nm. The cytotoxic effects of Mn(II) complex and Mn(II)-SLNs were 86.8 and 66.4%, respectively (p < .05). Additionally, both Mn(II) complex (39.25%) and Mn(II)-SLNs (38.05%) induced apoptosis and increased the arrest of G₀/G₁ phase. However, Mn(II) complex exerted toxic effects on the HUVEC control cell (63.4%), whereas no toxic effects was observed when treated with Mn(II)-SLNs at 150 μM. As a consequence, SLNs might be potentially used for metal-based complexes in the treatment of cancer due to reducing size and toxic effects of metal-based complexes.

Safety of posterior ankle arthroscopy portals in different ankle positions: a cadaveric study

PURPOSE

To investigate anatomic relation of standard and coaxial ankle arthroscopy portals with neurovascular structures during different degrees of ankle motion.

METHODS

Twenty posterior ankles of ten fresh cadavers were assessed. Posteromedial, posterolateral and coaxial (transmalleolar) portals were created using 4-mm Steinmann pins in accordance with the defined technique in neutral position. The ankles were then dissected, and the distance from the portals to the peroneal tendons, short saphenous vein and sural nerve was measured laterally and that from the tibial nerve, flexor hallucis longus tendon and posterior tibial artery was measured medially. Changes in the distance between these structures were noted in neutral positions, 15° of dorsiflexion and 30° plantar flexion.

RESULTS

In the neutral position, the mean distance of the conventional posterolateral portal to the sural nerve was 6 mm (SD 2.9, range 2.7-14.5). The mean distance of the posterolateral coaxial portal to the peroneal tendon was 1.6 mm (SD 0.55, range 1.1-2.9). The mean distance of the posteromedial portal to the FHL was 2.11 mm (SD 1.1, range 0-4.7). The mean distance of the posteromedial coaxial portal to the posterior tibial artery was 6 mm (SD 1.4, range 3.9-9.5). Although not statistically significant, the distance between the portal and neurovascular structures increased in dorsiflexion for the portals placed posteriorly to the neurovascular structures and increased in plantar flexion for the portals placed anterior to the neurovascular structures.

CONCLUSIONS

In comparison with the portals made in the neutral position, the distance between neurovascular structures and portals changes with portal placement in plantar flexion and dorsiflexion. In clinical practice, therefore, it might be safer to place the posteromedial-posterolateral portals in dorsiflexion and posterolateral-posteromedial coaxial portals in plantar flexion. The tibial nerve is closer to the posteromedial coaxial in dorsiflexion and could be in danger if making this portal with the foot in this position.

Fracture-dislocations of the proximal ulna

OBJECTIVE

To investigate the relationship between injury patterns, complications, and the functional outcomes of patients with proximal-ulna fracture-dislocations.

METHODS

Retrospective analysis of 15 patients (10 men, 5 women; mean age, 49.1 years; mean follow-up 49 months) with 6 anterior and 9 posterior fracture-dislocations of the proximal ulna. The proximal ulna was reconstructed with plates and screws in 13 patients and tension-band wiring in 2 patients. At the final follow-up, elbow range of motion (ROM) was measured and Mayo elbow scores (MEPS) were recorded. Broberg-Morrey criteria were used for osteoarthritis staging.

RESULTS

Concomitant radial-head fracture was seen in all posterior fracture-dislocations. Four ligamentous injuries occurred in this group. All anterior dislocations had trochlear-notch fractures without associated injuries. Mean flexion ROM was 130.6° (100°-140°) and mean loss of extension ROM was 12.6° (0°-30°) in the study group. The mean MEPS score was 92.3 (70-100). Patients with posterior fracture-dislocations showed lower ROM and MEPS and higher level of osteoarthritis than patients with anterior fracture-dislocations. Recurrent dislocations occurred in 2 patients who had ulna fractures fixed with tension-band wiring.

CONCLUSION

Radial-head fracture and ligamentous injury are specific components of posterior fracture-dislocations. The injury is limited to the trochlear notch in anterior fracture-dislocations. Posterior fracture-dislocations have lower functional outcomes. Proximal-ulna fractures should be fixed with rigid internal fixation (plate and screw) even if the fracture is a simple 2-part fracture.

Simultaneous bilateral lengthening of femora and tibiae in achondroplastic patients

OBJECTIVE

The aim of this study was to analyze the results and complications of simultaneous bilateral femoral and tibial lengthening in achondroplastic patients.

METHODS

The study included the 44 femora and 44 tibiae of 22 achondroplastic patients (16 females, 6 males; mean age: 6.36 years, range: 3 to 11 years) that underwent simultaneous lengthening. Orthofix LRS monolateral fixators were used for femoral lengthening and either Ilizarov-type or hexapod-type circular external fixators for tibial lengthening. Tenotomies of the hip flexors and the Achilles tendon were performed to prevent injury to the growth plates and to prevent joint contractures. Results and complications were evaluated according to Paley's scoring and complication systems.

RESULTS

Average follow-up time was 35 (range: 26 to 76) months. The femora were lengthened by an average of 7.07 cm (46.1%), and the tibiae by an average of 6.64 cm (52.9%). Patients gained an average of 16.9 cm in height, including physiological growth. The mean bone-healing index (BHI) was 31.2 days/cm for the femora (range: 17.4 to 43.3 days/cm) and 34.3 days/cm for the tibiae (range: 19.5 to 60.0 days/cm). Complications included 3 delayed maturations, 3 pin track infections, 5 transient fibular paralyses, 5 regenerate fractures, 1 late varus deformity, 1 knee contracture and 1 knee contracture secondary to knee dislocation. Functional scores were excellent in 78 segments, good in 8, fair in 1 and poor in one. There was no growth inhibition related to the lengthening.

CONCLUSION

Bilateral simultaneous lengthening of the femora and tibiae in achondroplastic patients provided a reduction in total treatment and external fixation time, with a low rate of complications.

Arthroscopic treatment of femoroacetabular impingement: early outcomes

OBJECTIVE

The aim of the study was to assess the early outcomes of the arthroscopic treatment of femoroacetabular impingement.

METHODS

Forty-two femoroacetabular impingement (FAI) patients (mean age: 35.1 years, range: 16 to 52 years) treated arthroscopically between 2006 and 2011 in our clinic were retrospectively analyzed. Twenty-five patients had Cam, 6 Pincer and 11 combined femoroacetabular impingement. Mean follow-up time was 28.2 (range: 10 to 72) months. Patients were assessed clinically and functionally using the Non-Arthritic Hip Score (NAHS), modified Harris Hip Score (mHHS), Oxford Hip Score, WOMAC score, and Visual Analogue Scale (VAS) pain scores preoperatively and at the final follow-up.

RESULTS

In clinical and functional assessments, there were increases of 24.8 points in mean NAHS, 23.3 in mHHS, 20.6 in WOMAC score and 9.6 in Oxford Hip Score. VAS pain score decreased by 4.9 points in comparison to the preoperative scores. There were no major complications. However, transient pudendal nerve neuropraxia was present in two patients, transient lateral femoral cutaneous nerve neuropraxia in one and asymptomatic heterotopic ossification in one patient.

CONCLUSION

Short-term clinical results of the arthroscopic treatment of the FAI appear to be satisfactory.

Effects of demineralized bone matrix on tendon-bone healing: an in vivo, experimental study on rabbits

OBJECTIVE

The aim of this study was to investigate the effects of demineralized bone matrix (DBM) on tendon-bone healing.

METHODS

The extensor digitorum longus tendon was fixed with pegged suture technique in a tunnel at the proximal tibia in both legs of 12 New Zealand rabbits. Rabbit DBM was applied in the tunnel on the right limbs before fixation (study group), while the fixation was performed without DBM in the left legs (control group). Randomly, four rabbits were sacrificed at the 3rd, four rabbits at the 6th and the remaining four rabbits at the 9th week with an intravenous high dose (200 mg/kg) pentothal and both legs were collected for histological analysis. Each specimen was blindly and independently examined to assess fibrocartilage formation, new bone formation, tendon graft bonding to adjacent tissue and Sharpey's fiber formation. A scoring system was used for quantification of histopathological analysis.

RESULTS

The DBM group showed higher number of Sharpey's fibers, slightly increased fibrocartilage formation and new bone formation scores than the control group in the 3rd week. All histological scores were similar in both groups in the 6th and 9th weeks (p>0.05).

CONCLUSION

DBM increased new bone formation and the number of Sharpey's fibers in a bone tunnel animal model within the first three weeks of tendon-bone healing process.

Quantitative telomerase activity in malignant, benign and normal gynecological tissues

OBJECTIVE

The aim of this study was to evaluate quantitative telomerase activity in malignant, benign and normal gynecological tissue samples by using the Telomerase-PCR ELISA kit, and to determine a cut-off level for malignancy by this quantitative method.

MATERIALS AND METHODS

Fifty gynecological tumors, 27 benign gynecological disorders and 29 normal tissues were analyzed by the Telomerase-PCR ELISA kit. All tissues were confirmed by a pathologist. A ROC (receiver operator characteristic) curve was drawn to determine a threshold level best discriminating malignant tissues from benign pathologies and normal tissues. Telomerase activity was compared in malignant, benign and normal tissues.

RESULTS

The mean level of telomerase activity of the malignant tumor samples (1.03 +/- 0.53 units) was significantly (p < .001) higher than the normal tissues (0.13 +/- 0.07 units) and benign pathologies (0.37 +/- 0.25 units). The cut-off point to differentiate malignant samples from benign samples was set at 0.42 units, where the sensitivity was 93.8% and the specificity was 89.3%. Positive predictive value was 84% and negative predictive value was 89.3%. There was a significant difference in telomerase activity between malignant, benign and normal tissues within each histological group.

CONCLUSION

In this preliminary study, the telomerase-PCR ELISA method was found to have a high sensitivity and specificity to differentiate malignant gynecological tissues from benign tissues.

Diagnostic implications of telomerase activity in pleural effusions

The aim of the present study was to investigate the diagnostic efficacy of telomerase activity for discrimination of malignant and benign pleural effusions. Pleural effusions were collected from 109 consecutive patients in whom the diagnosis was confirmed with cytological and/or histological examinations. Cytological samples were classified as malignant (n=63) and benign (n=46). Telomerase activity was determined with the polymerase chain reaction-based telomeric repeat amplification protocol assay. Telomerase activity was detected in 52 (82.5%) and nine (19.6%) samples from the malignant and benign groups, respectively, which was a significant difference. The sensitivity rate of cytological examination when combined with telomerase activity (92.1%) was significantly greater than that of cytological examination alone (53.9%). The sensitivity and specificity of telomerase activity were 82.5 and 80.4%, respectively. Diagnostic accuracy of telomerase activity was 81.6%. Telomerase activity is a highly sensitive diagnostic biomarker for malignancy and may be used as an adjunct to cytological findings in determining malignant pleural effusions.