Photobase-Triggered Formation of 3D Epitaxially Fused Quantum Dot Superlattices with High Uniformity and Low Bulk Defect Densities

Highly ordered epitaxially fused colloidal quantum dot (QD) superlattices (epi-SLs) promise to combine the size-tunable photophysics of QDs with the efficient charge transport of bulk semiconductors. However, current epi-SL fabrication methods are crude and result in structurally and chemically inhomogeneous samples with high concentrations of extended defects that localize carriers and prevent the emergence of electronic mini-bands. Needed fabrication improvements are hampered by inadequate understanding of the ligand chemistry that causes epi-SL conversion from the unfused parent SL. Here we show that epi-SL formation by the conventional method of amine injection into an ethylene glycol subphase under a floating QD film occurs by deprotonation of glycol by the amine and subsequent exchange of oleate by glycoxide on the QD surface. By replacing the amine with hydroxide ion, we demonstrate that any Brønsted-Lowry base that creates a sufficient dose of glycoxide can produce the epi-SL. We then introduce an epi-SL fabrication method that replaces point injection of a base with contactless and uniform illumination of a dissolved photobase. Quantitative mapping of multilayer (3D) films shows that our photobase-made epi-SLs are chemically and structurally uniform and have much lower concentrations of bulk defects compared to the highly inhomogeneous and defect-rich epi-SLs produced by amine point injection. The structural-chemical uniformity and structural perfection of photobase-made epi-SLs make them leading candidates for achieving emergent mini-band charge transport in a self-assembled mesoscale solid.

Free energy difference to create the M-OH* intermediate of the oxygen evolution reaction by time-resolved optical spectroscopy

Theoretical descriptors differentiate the catalytic activity of materials for the oxygen evolution reaction by the strength of oxygen binding in the reactive intermediate created upon electron transfer. Recently, time-resolved spectroscopy of a photo-electrochemically driven oxygen evolution reaction followed the vibrational and optical spectra of this intermediate, denoted M-OH^*. However, these inherently kinetic experiments have not been connected to the relevant thermodynamic quantities. Here we discover that picosecond optical spectra of the Ti-OH^* population on lightly doped SrTiO₃ are ordered by the surface hydroxylation. A Langmuir isotherm as a function of pH extracts an effective equilibrium constant relatable to the free energy difference of the first oxygen evolution reaction step. Thus, time-resolved spectroscopy of the catalytic surface reveals both kinetic and energetic information of elementary reaction steps, which provides a critical new connection between theory and experiment by which to tailor the pathway of water oxidation and other surface reactions.

The electron-transfer intermediates of the oxygen evolution reaction (OER) as polarons by in situ spectroscopy

The conversion of diffusive forms of energy (electrical and light) into short, compact chemical bonds by catalytic reactions regularly involves moving a carrier from an environment that favors delocalization to one that favors localization. While delocalization lowers the energy of the carrier through its kinetic energy, localization creates a polarization around the carrier that traps it in a potential energy minimum. The trapped carrier and its local distortion-termed a polaron in solids-can play a role as a highly reactive intermediate within energy-storing catalytic reactions but is rarely discussed as such. Here, we present this perspective of the polaron as a catalytic intermediate through recent in situ and time-resolved spectroscopic investigations of photo-triggered electrochemical reactions at material surfaces. The focus is on hole-trapping at metal-oxygen bonds, denoted M-OH*, in the context of the oxygen evolution reaction (OER) from water. The potential energy surface for the hole-polaron defines the structural distortions from the periodic lattice and the resulting "active" site of catalysis. This perspective will highlight how current and future time-resolved, multi-modal probes can use spectroscopic signatures of M-OH* polarons to obtain kinetic and structural information on the individual reaction steps of OER. A particular motivation is to provide the background needed for eventually relating this information to relevant catalytic descriptors by free energies. Finally, the formation of the O-O chemical bond from the consumption of M-OH*, required to release O₂ and store energy in H₂, will be discussed as the next target for experimental investigations.

Coherent Acoustic Interferometry during the Photodriven Oxygen Evolution Reaction Associates Strain Fields with the Reactive Oxygen Intermediate (Ti-OH*)

The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen-oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. A descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M-OH*), has been associated with significant distortions of the metal-oxygen bonds upon charge-trapping. Time-resolved spectroscopy of in situ, photodriven OER on transition metal oxide surfaces has characterized M-OH* for the charge trapping and the symmetry of the lattice distortions by optical and vibrational transitions, respectively, but had yet to detect an interfacial strain field arising from a surface coverage M-OH*. Here, we utilize picosecond, coherent acoustic interferometry to detect the uniaxial strain normal to the SrTiO₃/aqueous interface directly caused by Ti-OH*. The spectral analysis applies a fairly general methodology for detecting a combination of the spatial extent, magnitude, and generation time of the interfacial strain through the coherent oscillations' phase. For lightly n-doped SrTiO₃, we identify the strain generation time (1.31 ps), which occurs simultaneously with Ti-OH* formation, and a tensile strain of 0.06% (upper limit 0.6%). In addition to fully characterizing this intermediate across visible, mid-infrared, and now GHz-THz probes on SrTiO₃, we show that strain fields occur with the creation of some M-OH*, which modifies design strategies for tuning catalytic activity and provides insight into photo-induced degradation so prevalent for OER. To that end, the work put forth here provides a unique methodology to characterize intermediate-induced interfacial strain across OER catalysts.

Ultrafast vibrational dynamics of the tyrosine ring mode and its application to enkephalin insertion into phospholipid membranes as probed by two-dimensional infrared spectroscopy

Enkephalins are small opioid peptides whose binding conformations are catalyzed by phospholipid membranes. Binding to opioid receptors is determined by the orientation of tyrosine and phenylalanine side chains. In this work, we investigate the effects of different charged phospholipid headgroups on the insertion of the tyrosine side chain into a lipid bilayer using a combination of 2D IR spectroscopy, anharmonic DFT calculations, and third order response function modeling. The insertion is probed by using the ∼1515 cm^-1 tyrosine ring breathing mode, which we found exhibits rich vibrational dynamics on the picosecond timescale. These dynamics include rapid intramolecular vibrational energy redistribution (IVR), where some of the energy ends up in a dark state that shows up as an anharmonically shifted combination band. The waiting-time dependent 2D IR spectra also show an unusual line shape distortion that affects the extraction of the frequency-frequency correlation function (FFCF), which is the dynamic observable of interest that reflects the tyrosine side chain's insertion into the lipid bilayer. We proposed three models to account for this distortion: a hot-state exchange model, a local environment dependent IVR model, and a coherence transfer model. A qualitative analysis of these models suggests that the local environment dependent IVR rate best explains the line shape distortion, while the coherence transfer model best reproduced the effects on the FFCF. Even with these complex dynamics, we found that the tyrosine ring mode's FFCF is qualitatively correlated with the degree of insertion expected from the different phospholipid headgroups.

Optimized noise reduction scheme for heterodyne spectroscopy using array detectors

In this work, we optimize and further advance a noise reduction scheme for heterodyne spectroscopy. This scheme linearly combines data from reference detectors to predict the noise statistics in the signal detector through an optimized coefficient matrix. We validate this scheme for visible white-light-continuum and 800-nm light sources using un-matched CMOS arrays and show that the signal-to-noise ratio can approach the noise floor of the signal detector while using only ~5% of the energy for reference detection. We also optimize the strategy for estimating the coefficient matrix in practical applications. When combined with elaborate algorithms to perform pixel data compression and expansion, our scheme is applicable in difficult situations, including when the sample position is rapidly scanned, when detectors exhibit nonlinear response, and/or when laser fluctuations are large. The scheme is generalized to scenarios with complex chopping or phase cycling patterns, and a simple approach is provided for the chopping case. Finally, a robust and computationally efficient method is devised to remove multiplicative noise.

General noise suppression scheme with reference detection in heterodyne nonlinear spectroscopy

We devised a novel two-step reference scheme that can greatly suppress the additive and convolutional noises in heterodyne nonlinear spectroscopy. To optimally remove additive noise, we fully utilized the spectral correlation in multi-channel reference data through a linear combination and regression algorithm. Using our pump-probe 2D IR spectrometer, we demonstrated that our scheme can improve the signal-to-noise ratio by 10-30 times and reach the noise floor of the signal detector. The new algorithm is guaranteed to reduce noise, enables the use of unmatched reference detectors, and does not introduce baseline shift or signal distortion. This scheme is applicable to many heterodyne spectroscopic techniques.

A warm layer in Venus' cryosphere and high-altitude measurements of HF, HCl, H2O and HDO

Venus has thick clouds of H2SO4 aerosol particles extending from altitudes of 40 to 60 km. The 60-100 km region (the mesosphere) is a transition region between the 4 day retrograde superrotation at the top of the thick clouds and the solar-antisolar circulation in the thermosphere (above 100 km), which has upwelling over the subsolar point and transport to the nightside. The mesosphere has a light haze of variable optical thickness, with CO, SO2, HCl, HF, H2O and HDO as the most important minor gaseous constituents, but the vertical distribution of the haze and molecules is poorly known because previous descent probes began their measurements at or below 60 km. Here we report the detection of an extensive layer of warm air at altitudes 90-120 km on the night side that we interpret as the result of adiabatic heating during air subsidence. Such a strong temperature inversion was not expected, because the night side of Venus was otherwise so cold that it was named the 'cryosphere' above 100 km. We also measured the mesospheric distributions of HF, HCl, H2O and HDO. HCl is less abundant than reported 40 years ago. HDO/H2O is enhanced by a factor of approximately 2.5 with respect to the lower atmosphere, and there is a general depletion of H2O around 80-90 km for which we have no explanation.