Optimization of P1-P3 groups in symmetric and asymmetric HIV-1 protease inhibitors

HIV-1 protease is an important target for treatment of AIDS, and efficient drugs have been developed. However, the resistance and negative side effects of the current drugs has necessitated the development of new compounds with different binding patterns. In this study, nine C-terminally duplicated HIV-1 protease inhibitors were cocrystallised with the enzyme, the crystal structures analysed at 1.8-2.3 A resolution, and the inhibitory activity of the compounds characterized in order to evaluate the effects of the individual modifications. These compounds comprise two central hydroxy groups that mimic the geminal hydroxy groups of a cleavage-reaction intermediate. One of the hydroxy groups is located between the delta-oxygen atoms of the two catalytic aspartic acid residues, and the other in the gauche position relative to the first. The asymmetric binding of the two central inhibitory hydroxyls induced a small deviation from exact C2 symmetry in the whole enzyme-inhibitor complex. The study shows that the protease molecule could accommodate its structure to different sizes of the P2/P2' groups. The structural alterations were, however, relatively conservative and limited. The binding capacity of the S3/S3' sites was exploited by elongation of the compounds with groups in the P3/P3' positions or by extension of the P1/P1' groups. Furthermore, water molecules were shown to be important binding links between the protease and the inhibitors. This study produced a number of inhibitors with Ki values in the 100 picomolar range.

Solid-phase synthesis of libraries generated from a 4-phenyl-2-carboxy-piperazine scaffold

Strategies for finding novel structures of therapeutical interest are discussed. The rationale for the selection of the two scaffolds N4-(m-aminophenyl)-piperazine-2-carboxylic acid E and N4-(o-aminophenyl)-piperazine-2-carboxylic F is described. The synthesis of the appropriate precursors to scaffold E and F and their use in solid-phase chemistry are described. A 160-member library was produced combining these novel piperazine scaffolds with eight sulfonyl chlorides/acid chlorides and 10 amines. The compound library prepared was analyzed using LC-MS, showing the expected base peak in all wells at an average purity of 82%.

Design and synthesis of potent C(2)-symmetric diol-based HIV-1 protease inhibitors: effects of fluoro substitution

Implementation of derivatized carbohydrates as C(2)-symmetric HIV-1 protease inhibitors has previously been reported. With the objective of improving the anti-HIV activity of such compounds, we synthesized a series of fluoro substituted P1/P1' analogues. These compounds were evaluated for antiviral activity toward both wild type and mutant virus. The potency of the analogues in blocking HIV-1 protease was moderate, with K(i) values ranging from 1 to 7 nM. Nonetheless, compared to the parent nonfluorous inhibitors, a majority of the compounds exhibited improved antiviral activity, for example the 3-fluorobenzyl derivative 9b, which had a K(i) value of 7.13 nM and displayed one of the most powerful antiviral activities in the cellular assay of the series. Our results strongly suggest that fluoro substitution can substantially improve antiviral activity. The X-ray crystal structures of two of the fluoro substituted inhibitors (9a and 9f) cocrystallized with HIV-1 protease are discussed.

New proline mimetics: synthesis of thrombin inhibitors incorporating cyclopentane- and cyclopentenedicarboxylic acid templates in the P2 position. Binding conformation investigated by X-ray crystallography

With the aim to prepare nonpeptidic thrombin inhibitors, the amino acids of the thrombin-inhibiting tripeptide chain D-Phe-Pro-Arg were replaced with isosteres. Arg was replaced with the more rigid P1 truncated p-amidinobenzylamine (Pab), Pro with either cyclopentane-1, 2-dicarboxylic acid or cyclopentene-1,5-dicarboxylic acid, and D-Phe with a series of readily available lipophilic amines. One of the most potent compounds (25, pIC(50) = 6.01) in these series was cocrystallized with thrombin where the X-ray crystal structure provide insight to the structure-activity relationship (SAR).

Inhibitors of the C(2)-symmetric HIV-1 protease: nonsymmetric binding of a symmetric cyclic sulfamide with ketoxime groups in the P2/P2' side chains

Symmetric cyclic sulfamides, substituted in the P2/P2' position with functional groups foreseen to bind preferentially to the S2/S2' subsites of HIV-1 protease, have been prepared. Despite efforts to promote a symmetric binding, the sulfamides seemed prone to bind nonsymmetrically, as deduced from X-ray crystal structure analysis of one of the most potent inhibitors, possessing ketoxime groups in the P2/P2' side chains. Ab initio calculations suggested that the nonsymmetric conformation of the cyclic sulfamide scaffold had lower energy than the corresponding symmetric, cyclic urea-like conformation.

Design and fast synthesis of C-terminal duplicated potent C(2)-symmetric P1/P1'-modified HIV-1 protease inhibitors

An analysis of the X-ray structure of a complex of HIV-1 protease with a linear C(2)-symmetric C-terminal duplicated inhibitor guided the selection of a series of diverse target compounds. These were synthesized with the objective to identify suitable P1/P1' substituents to provide inhibitors with improved antiviral activity. Groups with various physical properties were attached to the para-positions of the P1/P1' benzyloxy groups in the parent inhibitor. A p-bromobenzyloxy compound, prepared in only three steps from commercially available starting materials, was utilized as a common precursor in all reactions. The subsequent coupling reactions were completed within a few minutes and relied on palladium catalysis and flash heating with microwave irradiation. All of the compounds synthesized exhibited good inhibitory potency in the protease assay, with K(i) values ranging from 0.09 to 3.8 nM. A 30-fold improvement of the antiviral effect in cell culture, compared to the parent compound, was achieved with four of the inhibitors. The differences in K(i) values were not correlated to the differences in antiviral effect, efficiency against mutant virus, or reduced potency in the presence of human serum. The poorest enzyme inhibitors in fact belong to the group with the best antiviral effect. The binding features of two structurally related inhibitors, cocrystallized with HIV-1 protease, are discussed with special emphasis on the interaction at the enzyme/water phase.

Design and synthesis of new potent C2-symmetric HIV-1 protease inhibitors. Use of L-mannaric acid as a peptidomimetic scaffold

A study on the use of derivatized carbohydrates as C2-symmetric HIV-1 protease inhibitors has been undertaken. L-Mannaric acid (6) was bis-O-benzylated at C-2 and C-5 and subsequently coupled with amino acids and amines to give C2-symmetric products based on C-terminal duplication. Potent HIV protease inhibitors, 28 Ki = 0.4 nM and 43 Ki = 0.2 nM, have been discovered, and two synthetic methodologies have been developed, one whereby these inhibitors can be prepared in just three chemical steps from commercially available materials. A remarkable increase in potency going from IC50 = 5000 nM (23) to IC50 = 15 nM (28) was observed upon exchanging -COOMe for -CONHMe in the inhibitor, resulting in the net addition of one hydrogen bond interaction between each of the two -NH- groups and the HIV protease backbone (Gly 48/148). The X-ray crystal structures of 43 and of 48 have been determined (Figures 5 and 6), revealing the binding mode of these inhibitors which will aid further design.

Cyclic HIV-1 protease inhibitors derived from mannitol: synthesis, inhibitory potencies, and computational predictions of binding affinities

Ten C2-symmetric cyclic urea and sulfamide derivatives have been synthesized from L-mannonic gamma-lactone and D-mannitol. The results of experimental measurement of their inhibitory potencies against HIV-1 protease were compared to calculated free energies of binding derived from molecular dynamics (MD) simulations. The compounds were selected, firstly, to enable elucidation of the role of stereochemistry for binding affinity (1a-d) and, secondly, to allow evaluation of the effects of variation in the link to the P1 and P1' phenyl groups on affinity (1a and 2-5). Thirdly, compounds with hydrogen bond-accepting or-donating groups attached to the phenyl groups in the P2 and P2' side chains (6 and 7) were selected. Binding free energies were estimated by a linear response method, whose predictive power for estimating binding affinities from MD simulations was demonstrated.

Synthesis of some 3',5'-dideoxy-5'-C-phosphonomethyl nucleosides

Ammonium [1-(3',5',6'-trideoxy-beta-D-erythro-hexofuranosyl)thymine]-6'- phosphonate (1), ammonium 3',5'-dideoxycytidine-5'-C-methylphosphonate (2) and 3',5'-dideoxyadenosine-5'-C-methyl phosphonic acid (3) have been synthesized and tested for anti-HIV activity. The key steps involved an Arbuzov reaction between triethyl phosphite and 3,5,6-trideoxy-6-iodo-1,2-O-isopropylidene-alpha-D-erythro- hexofuranose (7), followed by condensation with the appropriate nucleoside bases. The substances 1, 2 and 3 have been tested in vitro against HIV.

Immunochemical determination of the configuration of a haptenic substituent

Quantitative inhibition of specific immune precipitation, a rapid microanalytical technique requiring no expensive equipment, was used to determine the stereoconfiguration of pyruvyl groups attached as acetals to two hydroxyls of nonreducing lateral end groups of the capsular polysaccharides of Klebsiella serotypes K11 and K21. The R and S isomers of 4,6-O-pyruvyl-D-alpha-methylgalactoside were used as inhibitors with appropriate polysaccharide antigens and antisera to the two serotypes. The R isomer was a potent inhibitor of precipitation in both antisera, showing that the pyruvylgalactosyl residues in the polysaccharides of both K11 and K21 are in the R form, in which the methyl group of pyruvyl is equatorial to the plane of the acetal ring.