Background conductivity independent counter flow preconcentration method for capillary electrophoresis

A preconcentration method for anions is presented, which relies on a trap created by applying an electric field against a hydrodynamic flow of the sample. The trapping zone is created in front of a cation exchange membrane that allows the isolation of the electrode and thus prevents any interference by electrolysis products. Preconcentration factors of up to 20 were demonstrated for nitrate and formate as model analyte ions and were linearly related to the sample volume passed through the trap. A discrimination between the ions was found possible by adjustment of the hydrodynamic flow velocity. The method was also found to be suitable for the preconcentration of an anion (nitrate at 100 μM) in presence of a second anion at a very high concentration (50 mM formate). The detection limits for the four anions chloride, nitrate, perchlorate, and formate could be lowered from 4, 4.3, 4.2, and 7.2 μM obtained without trapping respectively to 127, 142, 139, and 451 nM with trapping.

Microfluidic Breadboard Approach to Capillary Electrophoresis

A breadboard approach for electrophoretic separations with contactless conductivity detection is presented. This is based on miniature off-the-shelf components such as syringe pumps, valves, and pressure controllers which could be set up in a very compact overall arrangement. It has a high flexibility for different tasks at hand, and the common operations of hydrodynamic injection and capillary flushing are automated. For demonstration of the versatility of the proposition, several very diverse configurations and modes of electrophoresis were successfully implemented, namely, standard capillary zone electrophoresis, pressure assisted zone electrophoresis, the simultaneous separation of cations and anions by dual-capillary zone electrophoresis, the separation of cationic amino acids by isotachophoresis, as well as the separation of small carboxylic acids by gradient elution moving boundary electrophoresis. The system also allows fast separations, as demonstrated by the analysis of six inorganic cations within 35 s. The approach addresses respective limitations of either conventional capillary electrophoresis instruments as well as electrophoretic lab-on-chip devices, while maintaining a performance in terms of detection limits and reproducibility comparable to standard instrumentation.

Validation of CE modeling with a contactless conductivity array detector

Dynamic computer simulation data are compared for the first time with CE data obtained with a laboratory made system comprising an array of 8 contactless conductivity detectors (C(4) Ds). The experimental setup featured a 50 μm id linear polyacrylamide (LPA) coated fused-silica capillary of 70 cm length and a purpose built sequential injection analysis manifold for fluid handling of continuous or discontinuous buffer configurations and sample injection. The LPA coated capillary exhibits a low EOF and the manifold allows the placement of the first detector at about 2.7 cm from the sample inlet. Agreement of simulated electropherograms with experimental data was obtained for the migration and separation of cationic and anionic analyte and system zones in CZE configurations in which EOF and other column properties are constant. For configurations with discontinuous buffer systems, including ITP, experimental data obtained with the array detector revealed that the EOF is not constant. Comparison of simulation and experimental data of ITP systems provided the insight that the EOF can be estimated with an ionic strength dependent model similar to that previously used to describe EOF in fused-silica capillaries dynamically double coated with Polybrene and poly(vinylsulfonate). For the LPA coated capillaries, the electroosmotic mobility was determined to be 17-fold smaller compared to the case with the charged double coating. Simulation and array detection provide means for quickly investigating electrophoretic transport and separation properties. Without realistic input parameters, modeling alone is not providing data that match CE results.

Triple-channel portable capillary electrophoresis instrument with individual background electrolytes for the concurrent separations of anionic and cationic species

The portable capillary electrophoresis instrument is automated and features three independent channels with different background electrolytes to allow the concurrent optimized determination of three different categories of charged analytes. The fluidic system is based on a miniature manifold which is based on mechanically milled channels for injection of samples and buffers. The planar manifold pattern was designed to minimize the number of electronic valves required for each channel. The system utilizes pneumatic pressurization to transport solutions at the grounded as well as the high voltage side of the separation capillaries. The instrument has a compact design, with all components arranged in a briefcase with dimensions of 45 (w) × 35 (d) × 15 cm (h) and a weight of about 15 kg. It can operate continuously for 8 h in the battery-powered mode if only one electrophoresis channel is in use, or for about 2.5 h in the case of simultaneous employment of all three channels. The different operations, i.e. capillary flushing, rinsing of the interfaces at both capillary ends, sample injection and electrophoretic separation, are activated automatically with a control program featuring a graphical user interface. For demonstration, the system was employed successfully for the concurrent separation of different inorganic cations and anions, organic preservatives, additives and artificial sweeteners in various beverage and food matrices.

Instrumentino: An Open-Source Software for Scientific Instruments

Scientists often need to build dedicated computer-controlled experimental systems. For this purpose, it is becoming common to employ open-source microcontroller platforms, such as the Arduino. These boards and associated integrated software development environments provide affordable yet powerful solutions for the implementation of hardware control of transducers and acquisition of signals from detectors and sensors. It is, however, a challenge to write programs that allow interactive use of such arrangements from a personal computer. This task is particularly complex if some of the included hardware components are connected directly to the computer and not via the microcontroller. A graphical user interface framework, Instrumentino, was therefore developed to allow the creation of control programs for complex systems with minimal programming effort. By writing a single code file, a powerful custom user interface is generated, which enables the automatic running of elaborate operation sequences and observation of acquired experimental data in real time. The framework, which is written in Python, allows extension by users, and is made available as an open source project.

Screening determination of four amphetamine-type drugs in street-grade illegal tablets and urine samples by portable capillary electrophoresis with contactless conductivity detection

A simple and inexpensive method for the identification of four substituted amphetamines, namely, 3,4-methylenedioxy methamphetamine (MDMA), methamphetamine (MA), 3,4-methylenedioxy amphetamine (MDA) and 3,4-methylenedioxy-N-ethylamphetamine (MDEA) was developed using an in-house constructed semi-automated portable capillary electrophoresis instrument (CE) with capacitively coupled contactless conductivity detection (C(4)D). Arginine 10mM adjusted to pH4.5 with acetic acid was found to be the optimal background electrolyte for the CE-C(4)D determination of these compounds. The best detection limits achieved with and without a sample preconcentration process were 10ppb and 500ppb, respectively. Substituted amphetamines were found in different seized illicit club drug tablets and urine samples collected from different suspected users. Good agreement between results from CE-C(4)D and those with the confirmation method (GC-MS) was achieved, with correlation coefficients for the two pairs of data of more than 0.99.

Micro-injector for capillary electrophoresis

A novel micro-injector for capillary electrophoresis for the handling of samples with volumes down to as little as 300 nL was designed and built in our laboratory for analyses in which the available volume is a limitation. The sample is placed into a small cavity located directly in front of the separation capillary, and the injection is then carried out automatically by controlled pressurization of the chamber with compressed air. The system also allows automated flushing of the injection chamber as well as of the capillary. In a trial with a capillary electrophoresis system with contactless conductivity detector, employing a capillary of 25 μm diameter, the results showed good stability of migration times and peak areas. To illustrate the technique, the fast separation of five inorganic cations (Na(+) , K(+) , NH4 (+) , Ca(2+) , and Mg(2+) ) was set up. This could be achieved in less than 3 min, with good limits of detection (10 μM) and linear ranges (between about 10 and 1000 μM). The system was demonstrated for the determination of the inorganic cations in porewater samples of a lake sediment core.

Concurrent determination of anions and cations in consumer fireworks with a portable dual-capillary electrophoresis system

A new automated portable dual-channel capillary electrophoresis instrument was built and applied to the concurrent determination of cations and anions. The system uses a single buffer and hydrodynamic injection of the sample is performed autonomously. A novel engraved flow-cell interface is used at the injection ends of the capillaries allowing the autonomous operation of the system. The engraved flow-cell replaces traditionally used split injectors in purpose made capillary electrophoresis systems and makes the system design easier. A new software package with graphical user interface was employed to control the system, making its operation simple and increasing its versatility. The electrophoretic method was optimized to allow the baseline separation of 12 cations and anions commonly found in fireworks. The system was proven to be useful for the analysis of consumer fireworks, saving time and expenses compared to separate analyses for anions and cations. This is the first time that cationic and anionic compositions of fireworks are investigated together. The analysis of samples revealed several inaccuracies between the declared compositions for the fireworks and the obtained results, which could be attributed to cross-contamination during their manufacture or to a transfer between other components of the pyrotechnic item. The presence of certain unexpected peaks, however, had no apparent reason and might represent an irregularity in the manufacture of some devices.