Optimized transport properties of LaAlO₃/SrTiO₃ heterointerfaces by variation of pulsed laser fluence

We show the influence of pulsed laser deposition fluence on the transport properties of the LaAlO(3)/SrTiO(3) (LAO/STO) heterointerface. Structural characterization by x-ray diffraction and medium energy ion spectrometry enables us to deduce that the electronic behaviour is extremely sensitive to the stoichiometry of the LAO layer as well as the structural quality of the STO surface. An optimum balance of these two quantities is demonstrated for an intermediate laser fluence.

The rapid growth of 3 microm long titania nanotubes by anodization of titanium in a neutral electrochemical bath

The length of titania nanotubes formed by anodization of 0.1 mm thick titanium foil was found to be a strong function of the pH of the electrolyte. The longest nanotubes were formed by using an electrolyte consisting of 1 M Na(2)SO(4) plus 5 wt% NH(4)F with pH 7. At this pH, after 30 min of anodization, 3 microm length nanotubular titania arrays with top diameters of approximately 50 nm and bottom diameters of 100 nm were produced. No acid was added to this electrolyte. The formation of titania nanotubes in neutral pH systems was therefore successful due to the excess NH(4)F in the electrolyte which increases the chemical dissolution process at the metal/oxide interface. Since the pH of the electrolyte at the top part of the nanotubes is kept very high, the dissolution of the nanotubes at the surface is minimal. However, the amount is adequate to remove the initial barrier layer, forming a rather well-defined nanoporous structure. All anodized foils were weakly crystalline and the transformation to anatase phase was achieved by heat treatment at temperatures from 200 to 500 degrees C for 1 h in air. Annealing at temperatures above 500 degrees C induce rutile phase formation and annealing at higher temperatures accelerates the diffusion of Ti(4+) leading to excessive growth and the nanotubular structure diminishes.

Charge confinement and doping at LaAlO3/SrTiO3 interfaces

The thickness and origin of the free charge layer which forms at the LaAlO_{3}/SrTiO_{3} interface is still uncertain. By inserting Mn dopants at different distances from the interface we can locate the position of carriers within the SrTiO3 surface layers. We show that the majority of the carriers in fully-oxygenated samples are confined within 1 unit cell of the interface. This confirms the "polar-catastrophe" mechanism proposed for this system but the low mobility of these carriers demonstrates the need for improved materials for applications and a more complete understanding of the role of the minority of higher mobility carriers identified.

The selective fabrication of large-area highly ordered TiO2 nanorod and nanotube arrays on conductive transparent substrates via sol-gel electrophoresis

Large-area free-standing arrays of TiO(2) nanorods and nanotubes were selectively synthesized on transparent conducting indium tin oxide substrates using sol-gel electrophoresis and anodic alumina (AAO) thin film templates. The effect of sol-gel ageing on the growth of TiO(2) was explained, providing a tailored ability to produce nanotubes and nanorods. An annular tungsten base electrode, stemming from the anodization of the AAO template, was found to be crucial to the growth of nanotubes. This was supported by a study of substrate annealing in a reducing atmosphere. The work can be readily adapted for the fabrication of free-standing arrays of other metal, metal oxide, and complex oxide nanorod and nanotube arrays on conducting substrates.

Growth and process conditions of aligned and patternable films of iron(III) oxide nanowires by thermal oxidation of iron

A simple, catalyst-free growth method for vertically aligned, highly crystalline iron oxide (α-Fe(2)O(3)) wires and needles is reported. Wires are grown by the thermal oxidation of iron foils. Growth properties are studied as a function of temperature, growth time and oxygen partial pressure. The size, morphology and density of the nanostructures can be controlled by varying growth temperature and time. Oxygen partial pressure shows no effect on the morphology of resulting nanostructures, although the oxide thickness increases with oxygen partial pressure. Additionally, by using sputtered iron films, the possibility of growth and patterning on a range of different substrates is demonstrated. Growth conditions can be adapted to less tolerant substrates by using lower temperatures and longer growth time. The results provide some insight into the mechanism of growth.

Materials science challenges for high-temperature superconducting wire

Twenty years ago in a series of amazing discoveries it was found that a large family of ceramic cuprate materials exhibited superconductivity at temperatures above, and in some cases well above, that of liquid nitrogen. Imaginations were energized by the thought of applications for zero-resistance conductors cooled with an inexpensive and readily available cryogen. Early optimism, however, was soon tempered by the hard realities of these new materials: brittle ceramics are not easily formed into long flexible conductors; high current levels require near-perfect crystallinity; and--the downside of high transition temperature--performance drops rapidly in a magnetic field. Despite these formidable obstacles, thousands of kilometres of high-temperature superconducting wire have now been manufactured for demonstrations of transmission cables, motors and other electrical power components. The question is whether the advantages of superconducting wire, such as efficiency and compactness, can outweigh the disadvantage: cost. The remaining task for materials scientists is to return to the fundamentals and squeeze as much performance as possible from these wonderful and difficult materials.

Hysteretic vortex pinning in superconductor-ferromagnet nanocomposites

This Letter reports the observation of hysteresis in the vortex pinning in a superconductor-ferromagnetic epitaxial nanocomposite consisting of fcc Gd particles incorporated in a Nb matrix. We show that this hysteretic pinning is associated with magnetic reversal losses in the Gd particles and is fundamentally different in origin to pinning interactions previously observed for ferromagnetic particles or other microstructural features.

Crossover between channeling and pinning at twin boundaries in YBa2Cu3O7 thin films

The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field, and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a crossover occurs to a regime in which channeling is blocked and the TBs act as planar pinning centers so that TB pinning enhances the overall Jc. In this regime, intrinsic pinning along the TBs is comparable to that between the twins.

Electrochemical growth of ZnO nanoplates

ZnO films were grown on polycrystalline Zn foil by cathodic electrodeposition in an aqueous zinc chloride/calcium chloride solution at 80 °C. Variation in the electrochemical parameters resulted in a variation in growth morphology from 1D (nanorods), 2D ('nanoplates') to 3D crystal growth. An as-received or mechanically polished substrate proved the most suitable substrate finish and allowed more highly aligned, dense structures to be grown; in contrast, electropolished substrates formed inhomogeneous deposits. Substrate annealing gave rise to large homogenous areas of nanorod deposition. Two-dimensional sheet growth was found to occur in conjunction with nanorods under specific electrochemical conditions. Hexagonal 'plates' approximately 50 nm in thickness and several microns in diameter were formed normal to the substrate.