Effects of the COVID-19 pandemic on suicide attempts in a rural region in Germany, a 5-year observational study

BACKGROUND

The COVID-19 pandemic and public life restrictions may have a negative impact on people's mental health. Therefore, we analyzed whether this condition affected the occurrence of suicide attempts (SA) over 20 months during the pandemic period.

METHODS

We included patient records according to DSM-5 criteria for suicidal behavior disorders (n = 825) between Jan 1, 2017, and Dec 31, 2021. We applied interrupted time-series Poisson regression models to investigate the effect of the pandemic on SA occurrence, time trends, and seasonal patterns in the whole group of patients as well as stratified by age and gender.

RESULTS

There was no significant effect of the pandemic on the occurrence of SA in the overall group. However, we observed a significant impact of the pandemic on the seasonal pattern of SA, also the variance differed significantly (pre-pandemic mean ± variance: 13.33 ± 15.75, pandemic: mean ± variance: 13.86 ± 7.26), indicating less periodic variation in SA during the pandemic. Male patients and young adults mainly contributed to this overall effect. Subgroup analysis revealed a significant difference in SA trends during the pandemic in older adults (>55 years) compared with younger adults (18-35 years); SA numbers increased in older adults and decreased in younger adults as the pandemic progressed.

LIMITATIONS

A few patients may have received initial care in an emergency department after SA without being referred to psychiatry.

CONCLUSIONS

In general, the COVID-19 pandemic and related measures did not significantly affect the occurrence of SA but did significantly affect the dynamics. In addition, the pandemic appeared to affect suicidal behavior differently across age groups as it progressed. Particularly for the older adult group, negative long-term effects of the pandemic on suicidal behavior can be derived from the present results, indicating the need to strengthen suicide prevention for the elderly.

Technical note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - part II: 3D printed Tübingen palatal plate prototype for newborns with Robin sequence

Background

Orthodontic treatment of newborns and infants with Robin-Sequence using the Tübingen Palatal Plate (TPP) is a complex procedure that could benefit from simplification through digitalization. The design of the velar extension (spur) and the palatal base determines the success of the treatment. Therefore, a prototype must be produced and inserted under endoscopic supervision in order to determine the appropriate shape, length and position of the spur. This technical note demonstrates a fully digital workflow for the design and manufacturing of a functional TPP prototype, based on an intraoral scan. This prototype can be altered and individualized digitally for each patient. After the shape and position of the spur have been optimized, the prototype is duplicated using a silicone mold. Then the definitive TPP is manufactured and inserted. We aim to present a workflow which facilitates the fitting procedure and does not require a conventional impression or a physical model to create the appliance.

Methods

As described in part I of this series, the intraoral scan is performed using the 3Shape TRIOS3 scanner and its corresponding acquisition software. The virtual model is rendered in the 3Shape ortho appliance designer and the base of the palatal plate is designed in the 3Shape dental designer. The palatal plate and the virtual model are then imported into Autodesk Meshmixer and a standardized spur is positioned and merged with the base. The TPP is exported in Standard Tessellation Language (STL) format and manufactured on a W2P Solflex 170 DLP printer using VOCO VPrint Splint material (MDR Class IIa).

Results

Based on an intraoral scan, the TPP prototype could be successfully manufactured and proved suitable for the patients’ treatment.

Conclusion

The new digital workflow for the design of the TPP can been successfully implemented into daily clinical routine in our facility. Patients could be alleviated from having to undergo conventional impression procedures and fitting of the TPP could be facilitated by producing multiple functional prototypes for endoscopic evaluation. Through rapid prototyping, the expenditure of the fitting process was reduced, which makes the TPP therapy more efficient and accessible to a wider range of clinicians.

Technical note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - part I: 3D printed and milled palatal stimulation plate for trisomy 21

Background

Advanced digital workflows in orthodontics and dentistry often require a combination of different software solutions to create patient appliances, which may be a complex and time-consuming process. The main objective of this technical note is to discuss treatment of craniofacial anomalies using digital technologies. We present a fully digital, linear workflow for manufacturing palatal plates for infants with craniofacial anomalies based on intraoral scanning. Switching to intraoral scanning in infant care is advantageous as taking conventional impressions carries the risk of impression material aspiration and/or infections caused by material remaining in the oronasal cavity.

Material and methods

The fully digital linear workflow presented in this technical note can be used to design and manufacture palatal plates for cleft palate patients as well as infants with functional disorders. We describe the workflow implemented in an infant with trisomy 21. The maxilla was registered using a digital scanner and a stimulation plate was created using dental CAD software and an individual impression tray module on a virtual model. Plates were manufactured using both additive and subtractive methods. Methacrylate based light curing resin and Poly-Ether-Ether-Ketone were the materials used.

Results

The palatal area was successfully scanned to create a virtual model. The plates fitted well onto the palatal area. Manual post-processing was necessary to optimize a functional ridge along the vestibular fold and remove support structures from the additively manufactured plate as well as the milled plate produced from a blank. The additively manufactured plate fitted better than the milled one.

Conclusion

Implementing a fully digital linear workflow into clinical routine for treatment of neonates and infants with craniofacial disorders is feasible. The software solution presented here is suitable for this purpose and does not require additional software for the design. This is the key advantage of this workflow, which makes digital treatment accessible to all clinicians who want to deal with digital technology. Whether additive or subtractive manufacturing is preferred depends on the appliance material of choice and influences the fit of the appliance.

Measurement of Gastric Circumference in Foetuses with Oesophageal Atresia

Background: The specific recognition of oesophageal atresia (OA) with or without a tracheal fistula in a foetus is a diagnostic challenge for prenatal medicine. The aim of the present work is to analyse the value of the measurement of gastric size in the diagnosis of this significant malformation. Materials and Methods: Altogether, the examinations of 433 pregnancies between the 18.4 and 39.1 weeks of gestation were retrospectively analysed. 59 of these foetuses exhibited an OA. By means of a linear regression analysis with normal foetuses, significant parameters influencing gastric size were examined. Subsequently the gastric sizes were transformed into z values and a comparison was made between OA with and without fistulae with the help of t tests. Results: In the normal foetuses there was a significant association between the gastric circumference and the abdominal circumference (circumference = 6.809 + 0.179 × abdominal circumference, r = 0.686, p < 0.0001). In the normal group the average was 43.0 (standard deviation [SD] 13.7) mm and those in foetuses with and without fistuale were 33.8 (SD 22.7) and 0.9 (SD 3.7) mm. In 34 (57.6 %) foetuses with an OA, the gastric circumference was below the 5th percentile. In detail, there were 13 (34.2 %) foetuses with a fistula and 21 (100 %) without a fistula. The average z values in the normal group and in the groups of OA with fistula and without fistula amounted to 0.0 (SD 1.0), -1.3 (SD 2.2) and -4.5 (SD 1.0). Conclusion: Measurements of the gastric circumference below the 5th percentile should lead to further diagnostic measures, especially when associated with polyhydramnios. Although OA without a fistula is always conspicuous, only about one in three OAs with fistula are associated with a significantly smaller stomach.

A historic cohort study on accelerated advancement of enteral feeding volumes in very premature infants

BACKGROUND

The optimal rate of enteral feeding (EF) advancement in very low birth weight infants is under debate.

OBJECTIVES

To evaluate the effects of accelerated EF advancement on the time to full enteral feeds, on early postnatal growth as well as on the frequency of necrotizing enterocolitis (NEC) and focal intestinal perforation (FIP) in very premature infants.

METHODS

In a retrospective single-center historic cohort study, infants with a gestational age <32 weeks at birth and birth weight <1,500 g, born between January 1, 2006, and December 31, 2007 (n = 136), were compared with infants born between January 1, 2010, and December 31, 2010 (n = 88). In 2006/2007, enteral feeds were initiated on day 1 with 10-15 ml/kg/day and advanced by 15-20 ml/kg/day. In 2010, enteral feeds were initiated with 20 ml/kg/day on day 1 and advanced by 25-30 ml/kg/day. Full enteral feeds were defined as ≥ 140 ml/kg/day. Data are presented as median (P25-P75).

RESULTS

The time to establish full enteral feeds was shorter in 2010: 8 (7-11) days in 2006/2007 versus 6 (5-9) days in 2010. The incidences of NEC and FIP were 2.7 and 4.1% in 2006/2007 and 3.3 and 2.2% in 2010, respectively. Weight gain was not affected by the rate of EF advancement. Higher parenteral protein intake during week 1 in 2006/2007 was associated with better head circumference growth.

CONCLUSIONS

The new approach was associated with a significantly shorter period to establish full enteral feeds. No difference in the incidence of FIP or NEC was observed; however, the study was underpowered to detect small but possibly important differences.

[Newborn with phocomelia and thrombocytopenia. Case report]

Associated malformations and symptoms may be decisive in the differential diagnosis of neonatal phocomelia. We report on a neonate with phocomelia, petechiae and thrombocytopenia. This constellation is typical for the phocomelia-thrombocytopenia-syndrome, a variant of the thrombocytopenia-absent radius-(TAR) syndrome. During the neonatal period platelet transfusions were necessary. Relevant bleeding and development delays were not evident until the age of seven months. Cardinal symptoms of the TAR syndrome are bilaterally absent radius and neonatal thrombocytopenia. The patient presented with phocomelia of the upper extremities which occurs in only 5 - 10 % of the patients with TAR syndrome. Further abnormalities include additional bone and joint disorders and haematopoietic problems, such as thrombocytopenia. Bleeding episodes mainly occur in the first year of life, hence platelet transfusions may be necessary during this period. A new experimental approach is the Interleukin-6-mediated stimulation of thrombopoiesis. Usually platelet counts reach normal values in adults. The main problem remains a satisfactory management of various limb defects.

Three-dimensional computer morphometry of the maxilla and face in infants with Pierre Robin sequence--a comparative study

OBJECTIVE

To analyze the morphology of the maxillary crest in infants with Pierre Robin sequence using an anthropometric coordinate system and to compare the data with those of healthy infants.

SETTING

The study was performed at a craniofacial center servicing a large geographic area.

PARTICIPANTS

The study involved eight infants aged 1-28 days (average, 7 days) with an established diagnosis of Pierre Robin sequence and six healthy infants aged 1-43 days (average, 22 days).

MAIN OUTCOME MEASURES

Physical models of the maxilla and face obtained by alginate replication were analyzed by computer morphometry yielding the three-dimensional topology of the maxillary crest.

RESULTS

The maxillary crest of children with Pierre Robin sequence shows an increased inclination relative to the transverse plane (30 +/- 3.9 degrees) as compared with that of healthy infants (20 +/- 2.9 degrees). The maxillary crest of the patients is shortened in the sagittal direction by comparison with healthy controls.

CONCLUSIONS

The increased inclination of the maxilla in infants with Pierre Robin sequence may aggravate the retroposition of the mandible and may thus be a pathogenetic factor contributing to the severe respiratory problems.

Randomized double blind trial of Ambroxol for the treatment of respiratory distress syndrome

In order to test the ability of Ambroxol to improve the clinical course of respiratory distress syndrome and to reduce the incidence of complications a multicentre, randomized, placebo-controlled double-blind trial was conducted. Entry was limited to infants with a birth weight below 1500 g. A total of 179 neonates were enrolled, but 31 were later excluded because they had other diseases. Of the remaining 148 babies, 74 received Ambroxol (birth weight 1190 +/- 216 g; gestational age 29.1 +/- 1.9 weeks) and 74 placebo (birth weight 1168 +/- 216 g; gestational age 28.9 +/- 1.9 weeks). In the Ambroxol group 23 (31%) and in the placebo group 27 (37%) infants died during the first 5 months of life. In 28 day-survivors Ambroxol was able to significantly improve the PaO2/FiO2 ratio, mean airway pressure, phospholipid profile of tracheal effluent and pulmonary mechanics of spontaneously breathing infants. In addition, the incidences of bronchopulmonary dysplasia (29% vs 54%), intraventricular haemorrhage (25% vs 44%) and postnatally acquired pneumonia (15% vs 36%) were significantly reduced in the Ambroxol group as compared to the control group. No adverse events attributed to the Ambroxol treatment were reported.

[Phenobarbital poisoning in a eutrophic term newborn infant. A case report]

An iatrogenic intoxication with 300 mg phenobarbital (Lepinal) in a newborn is reported. Description is given about clinical course, blood levels of phenobarbital (maximum 507 mumols/l) and the therapy. The most important therapeutic interventions like alkalinization of urine, haemoperfusion or blood exchange are directed towards increase of elimination of phenobarbital. The phenobarbital blood level decreased from 349 mumols/l before to 242 mumols/l after the blood exchange transfusion in our case. The transfer to a pediatric intensive care unit should be made as early as possible because of the risk of respiratory failure.

[Vein of Galen malformation in a newborn infant with clinical symptoms of a cardiologic emergency]

We report on the management of one term newborn infant with a malformation of the Vena Galeni. The baby suffered from cyanosis and intractable congestive heart failure without evidence of congenital heart malformation at his second day of life. The diagnosis was established by two-dimensional sonography and Doppler examination. However, we thought it necessary additionally to perform an angiography of the intracerebral vessels before surgical intervention. We conclude that a real time two-dimensional imaging system and a range-gated pulsed Doppler velocimeter should be available in newborn intensive care units. Otherwise neonatologists are forced to transport these infants to pediatric heart centers because of inability to detect such an extracardiac origin of heart and circulatory failure.