Multiscale Microstructure, Composition, and Stability of Surfactant/Polymer Foams

Inclusion of polymer additives is a known strategy to improve foam stability, but questions persist about the amount of polymer incorporated in the foam and the resulting structural changes that impact material performance. Here, we study these questions in sodium dodecyl sulfate (SDS)/hydroxypropyl methylcellulose (HPMC) foams using a combination of flow injection QTOF mass spectrometry and small-angle neutron scattering (SANS) measurements leveraging contrast matching. Mass spectrometry results demonstrate polymer incorporation and retention in the foam during drainage by measuring the HPMC-to-SDS ratio. The results confirm a ratio matching the parent solution and stability over the time of our measurements. The SANS measurements leverage precise contrast matching to reveal detailed descriptions of the micellar structure (size, shape, and aggregation number) along with the foam film thickness. The presence of HPMC leads to thicker films, correlating with increased foam stability over the first 15-20 min after foam production. Taken together, mass spectrometry and SANS present a structural and compositional picture of SDS/HPMC foams and an approach amenable to systematic study for foams, gathering mechanistic insights and providing formulation guidance for rational foam design.

Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides

All-aromatic polyimides have degradation temperatures above 500 °C, excellent mechanical strength, and chemical resistance, and are thus ideal polymers for high-temperature applications. However, their all-aromatic structure impedes additive manufacturing (AM) because of the lack of melt processability and insolubility in organic solvents. Recently, our group demonstrated the design of UV-curable polyamic acids (PAA), the precursor of polyimides, to enable their processing using vat photopolymerization AM. This work leverages our previous synthetic strategy and combines it with the high solution viscosity of nonisolated PAA to yield suitable UV-curable inks for UV-assisted direct ink write (UV-DIW). UV-DIW enabled the design of complex three-dimensional structures comprising of thin features, such as truss structures. Dynamic mechanical analysis of printed and imidized specimens confirmed the thermomechanical properties typical of all-aromatic polyimides, showing a storage modulus above 1 GPa up to 400 °C. Processing polyimide precursors via DIW presents opportunity for multimaterial printing of multifunctional components, such as three-dimensional integrated electronics.

3D Printing All-Aromatic Polyimides Using Stereolithographic 3D Printing of Polyamic Acid Salts

Polyamic acid (PAA) salts are amenable to photocuring additive manufacturing processes of all-aromatic polyimides. Due to an all-aromatic structure, these high-performance polymers are exceptionally chemically and thermally stable but are not conventionally processable in their imidized form. The facile addition of 2-(dimethylamino)ethyl methacrylate (DMAEMA) to commercially available poly(4,4'-oxydiphenylene pyromellitamic acid) (PMDA-ODA PAA) afforded ultraviolet curable PAA salt solutions. These readily prepared solutions do not require multistep synthesis, exhibited fast gel times (<5 s), and rendered high G' gel-state moduli. Vat photopolymerization 3D printing afforded self-supporting organogels. Subsequent thermal treatment rendered the cross-linked PAA precursor to all-aromatic PMDA-ODA polyimide. This fast and facile strategy makes PMDA-ODA polyimides accessible in three dimensions and offers impact on aerospace or automotive technologies.

“Clickable PEG” via anionic copolymerization of ethylene oxide and glycidyl propargyl ether

First one-step synthesis of poly(ethylene glycol) bearing multiple alkyne-groups along the polyether backbone and subsequent generation of PEG-glycopolymers by CuAAC.

Conventional Oxyanionic versus Monomer-Activated Anionic Copolymerization of Ethylene Oxide with Glycidyl Ethers: Striking Differences in Reactivity Ratios

Detailed understanding of the monomer distribution in copolymers is essential to tailor their properties. For the first time, we have been able to utilize in situ ¹H NMR spectroscopy to monitor the monomer-activated anionic ring opening copolymerization (AROP) of ethylene oxide (EO) with a glycidyl ether comonomer, namely, ethoxy ethyl glycidyl ether (EEGE). We determine reactivity ratios and draw a direct comparison to conventional oxyanionic ROP. Surprisingly, the respective monomer reactivities differ strongly between the different types of AROP. Under conventional oxyanionic conditions similar monomer reactivities of EO and EEGE are observed, leading to random structures (r_EO = 1.05 ± 0.02, r_EEGE = 0.94 ± 0.02). Addition of a cation complexing agent (18-crown-6) showed no influence on the relative reactivity of EO and EEGE (r_EO = r_EEGE = 1.00 ± 0.02). In striking contrast, monomer-activated AROP produces very different monomer reactivities, affording strongly tapered copolymer structures (r_EO = 8.00 ± 0.16, r_EEGE = 0.125 ± 0.003). These results highlight the importance of understanding reactivity ratios of comonomer pairs under certain polymerization conditions, at the same time demonstrating the ability to generate both random and strongly tapered P(EO-co-EEGE) polyethers by simple one-pot statistical anionic copolymerization. These observations may be generally valid for the copolymerization of EO and glycidyl ethers.

Hierachical Ni@Fe2O3 superparticles through epitaxial growth of γ-Fe2O3 nanorods on in situ formed Ni nanoplates

One endeavour of nanochemistry is the bottom-up synthesis of functional mesoscale structures from basic building blocks. We report a one-pot wet chemical synthesis of Ni@γ-Fe2O3 superparticles containing Ni cores densely covered with highly oriented γ-Fe2O3 (maghemite) nanorods (NRs) by controlled reduction/decomposition of nickel acetate (Ni(ac)2) and Fe(CO)5. Automated diffraction tomography (ADT) of the Ni-Fe2O3 interface in combination with Mössbauer spectroscopy showed that selective and oriented growth of the γ-Fe2O3 nanorods on the Ni core is facilitated through the formation of a Fe0.05Ni0.95 alloy and the appearance of superstructure features that may reduce strain at the Ni-Fe2O3 interface. The common orientation of the maghemite nanorods on the Ni core of the superparticles leads to a greatly enhanced magnetization. After functionalization with a catechol-functional polyethylene glycol (C-PEG) ligand the Ni@γ-Fe2O3 superparticles were dispersible in water.

Intrinsic superoxide dismutase activity of MnO nanoparticles enhances the magnetic resonance imaging contrast

MnO nanoparticles decompose superoxide and hydrogen peroxide in an enzyme-like manner leading to enhanced MRI contrast.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.