Multiscale Length Structural Investigation and Thermoelectric Performance of Double-Filled Sr0.2Yb0.2Co4Sb12: An Exceptional Thermal Conductivity Reduction by Filler Segregation to the Grain Boundaries

Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3̅. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of ∼94 and ∼67 K for Sr and Yb, respectively, and a Debye temperature of ∼250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m-1 K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 × 10-5 Ω m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.

Magnetoelastic Coupling Evidence by Anisotropic Crossed Thermal Expansion in Magnetocaloric RSrCoFeO6 (R = Sm, Eu) Double Perovskites

Double perovskite oxides, characterized by their tunable magnetic properties and robust interconnection between the lattice and magnetic degrees of freedom, present an enticing foundation for advanced magnetic refrigeration materials. Herein, we delve into the influence of rare-earth elements on RSrCoFeO6 (R = Sm, Eu) disordered double perovskites by examining their structural, electronic, magnetic, and magnetocaloric properties. Temperature-dependent synchrotron X-ray diffraction analysis confirmed the stability of the orthorhombic phase (Pnma) across a wide temperature range. X-ray photoemission spectroscopy revealed that both Sm and Eu are in the 3+ state, whereas multiple states for Co2+/3+ and Fe3+/4+ are identified. The magnetic investigation and magnetocaloric effect (MCE) analysis brought to light the presence of a long-range antiferromagnetic (AFM) order with a second-order phase transition (SOPT) in both samples. The maximum magnetic entropy change ΔSMmax was approximately 0.9 J/kg K for both samples at applied field 0-7 T, manifesting prominently above Neel temperatures TN ≈ 93 K (Sm) and 84 K (Eu). Nevertheless, different relative cooling powers (RCP) of 112.6 J/kg (Sm) and 95.5 J/kg (Eu) were observed. A detailed analysis of the temperature-dependent lattice parameters shed light on a distinct magnetocaloric effect across the magnetic transition temperature, unveiling an anisotropic thermal expansion [αV = 1.41 × 10-5 K-1 (Sm) and αV = 1.54 × 10-5 K-1 (Eu)] wherein the thermal expansion axial ratio αbSm/αbEu = 0.61 became lower with increasing temperature, which suggests that the Eu sample experiences a greater thermal expansion in the b-axis direction. At the atomic bonding level, the evidence for magnetoelastic coupling around the magnetic transition temperatures TN was found through the anomalies along the average Co/Fe-O bond distance, formal valence, octahedral distortion, as well as an anisotropic lattice expansion.

Exotic Magnetism in Perovskite KOsO_{3}

A new perovskite KOsO_{3} has been stabilized under high-pressure and high-temperature conditions. It is cubic at 500 K (Pm-3m) and undergoes subsequent phase transitions to tetragonal at 320 K (P4/mmm) and rhombohedral (R-3m) at 230 K as shown from refining synchrotron x-ray powder diffraction (SXRD) data. The larger orbital overlap integral and the extended wave function of 5d electrons in the perovskite KOsO_{3} allow to explore physics from the regime where Mott and Hund's rule couplings dominate to the state where the multiple interactions are on equal footing. We demonstrate an exotic magnetic ordering phase found by neutron powder diffraction along with physical properties via a suite of measurements including magnetic and transport properties, differential scanning calorimetry, and specific heat, which provide comprehensive information for a system at the crossover from localized to itinerant electronic behavior.

Elucidating the Magnetoelastic Coupling, Pressure-Dependent Magnetic Behavior, and Anomalous Hall Effect in FexTi2S4 Intercalation Sulfides

Transition-metal chalcogenides with intercalated layered structures are interesting systems in material physics due to their attractive electronic and magnetic properties, with applications in the fields of magnetic refrigerators, catalysts, and thermoelectrics, among others. In this work, we studied in detail the structural, electronic, and magnetic properties of (Fe,Ti)-based sulfides with formula FexTi2S4 (x = 0.24, 0.32, and 0.42), prepared as polycrystalline materials under high-pressure conditions. They present a layered Heideite-type crystal structure, as assessed by synchrotron X-ray diffraction. A local structure analysis using Fe K-edge extended X-ray-absorption fine structure (EXAFS) data unveiled a conspicuous contraction of the main Fe-S bond in Fe0.24Ti2S4 at the vicinity of the magnetic transition 60-80 K. We suggest that this anomaly is related to magnetoelastic coupling effects. The EXAFS analysis allowed extraction of the Einstein temperatures (θE), i.e., the phonon contribution to the specific heat, for the two bond pairs Fe-S(1) [θE ≈318 K; 290 K (C/T)] and Fe-Ti(1) [θE ≈218 K; 190 K (C/T)]. In addition to the structural and local vibrational measurements, we probed the magnetic properties using magneto-calorimetry, magnetometry under applied pressure, magnetoresistance (MR), and Hall effect measurements. We observed the appearance of a broad peak in the specific heat around 120 K in the x = 0.42 compound that we associated with an antiferromagnetic ordering electronic transition. We found that the antiferromagnetic transition temperature is pressure and composition sensitive and reduces at 1.2 GPa by ∼12 and ∼3 K, for the members with x = 0.24 and x = 0.42, respectively. Similarly, the saturation magnetization in the ordered phase depends on both pressure and iron content, reducing its value by 50, 90, and 30% for x = 0.24, 0.32, and 0.42, respectively. We observed clear jumps in the magnetic hysteresis loops, MR, and anomalous Hall effect (AHE) below 2 K at fields around 2-4 T. We associated this observation with the metamagnetic transitions; from the Berry-curvature a decoupling parameter of SH = 0.12 V-1 is determined. Comparison of the results on the temperature-dependent magnetization, MR, and AHE elucidates a strong inelastic scattering contribution to the AHE at higher temperatures due to the cluster spin-glass phase.

Structural Features and Optical Properties of All-Inorganic Zero-Dimensional Halides Cs4PbBr6-xIx Obtained by Mechanochemistry

Despite the great success of hybrid CH3NH3PbI3 perovskite in photovoltaics, ascribed to its excellent optical absorption properties, its instability toward moisture is still an insurmountable drawback. All-inorganic perovskites are much less sensitive to humidity and have potential interest for solar cell applications. Alternative strategies have been developed to design novel materials with appealing properties, which include different topologies for the octahedral arrangements from three-dimensional (3D, e.g., CsPbBr3 perovskite) or two-dimensional (2D, e.g., CsPb2Br5) to zero-dimensional (0D, i.e., without connection between octahedra), as the case of Cs4PbX6 (X = Br, I) halides. The crystal structure of these materials is complex, and their thermal evolution is unexplored. In this work, we describe the synthesis of Cs4PbBr6-xIx (x = 0, 2, 4, 6) halides by mechanochemical procedures with green credentials; these specimens display excellent crystallinity enabling a detailed structural investigation from synchrotron X-ray powder diffraction (SXRD) data, essential to revisit some features in the temperature range of 90-298 K. In all this regime, the structure is defined in the trigonal R3̅c space group (#167). The presence of Cs and X vacancies suggests some ionic mobility into the crystal structure of these 0D halides. Bond valence maps (BVMs) are useful in determining isovalent surfaces for both Cs4PbBr6 and Cs4PbI6 phases, unveiling the likely ionic pathways for cesium and bromide ions and showing a full 3D connection in the bromide phase, in contrast to the iodide one. On the other hand, the evolution of the anisotropic displacement parameters is useful to evaluate the Debye temperatures, confirming that Cs atoms have more freedom to move, while Pb is more confined at its site, likely due to a higher covalency degree in Pb-X bonds than that in Cs-X bonds. Diffuse reflectance ultraviolet-visible (UV-vis) spectroscopy shows that the optical band gap can be tuned depending on iodine content (x) in the range of 3.6-3.06 eV. From density functional theory (DFT) simulations, the general trend of reducing the band gap when Br is replaced by I is well reproduced.

Structural stability, optical and thermoelectric properties of the layered RbSn2Br5 halide synthesized using mechanochemistry

Two-dimensional (2D) layered metal halide perovskites have recently received a lot of attention due to their possible applications as photovoltaic and optoelectronic materials. Rubidium di-tin pentabromide, RbSn2Br5, is a promising...

Thermal Expansion and Rattling Behavior of Gd-Filled Co4Sb12 Skutterudite Determined by High-Resolution Synchrotron X-ray Diffraction

In this work, Gd-filled skutterudite GdxCo4Sb12 was prepared using one step method under high pressure in a piston-cylinder-based press at 3.5 GPa and moderate temperature of 800 °C. A detailed structural characterization was performed using synchrotron X-ray diffraction (SXRD), revealing a filling fraction of x = 0.033(2) and an average <Gd−Sb> bond length of 3.3499(3) Å. The lattice thermal expansion accessed via temperature-dependent SXRD led to a precise determination of a Debye temperature of 322(3) K, from the fitting of the unit-cell volume expansion using the second order Grüneisen approximation. This parameter, when evaluated through the mean square displacements of Co and Sb, displayed a value of 265(2) K, meaning that the application of the harmonic Debye theory underestimates the Debye temperature in skutterudites. Regarding the Gd atom, its intrinsic disorder value was ~5× and ~25× higher than those of the Co and Sb, respectively, denoting that Gd has a strong rattling behavior with an Einstein temperature of θE = 67(2) K. As a result, an ultra-low thermal conductivity of 0.89 W/m·K at 773 K was obtained, leading to a thermoelectric efficiency zT of 0.5 at 673 K.

A novel crystallographic location of rattling atoms in filled Eu x Co4Sb12 skutterudites prepared under high-pressure conditions

Thermoelectric M x Co4Sb12 skutterudites are well-known to exhibit a reduced thermal conductivity thanks to the rattling effect of the M-filler at the large cages occurring in the framework, centered at the 2a sites of the I m 3 ‾ $Im\overline{3}$ space group. A novel Eu-filled skutterudite has been synthesized under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. The structural refinement from high-angular resolution synchrotron X-ray diffraction (SXRD) patterns unveils an unusual position for Eu filler atoms. By difference Fourier synthesis they are found at 12d sites, conforming statistically occupied octahedra within the mentioned cages around 2a positions. The Debye temperature was estimated by averaging the isotropic displacements by the atomic masses, leading to θ D ${\theta }_{D}$ of 273(2) K. Oftedal plots concerning the y and z Sb fractional positions, the unit-cell parameter a and M filling fraction include the novel Eu specimen in the trend observed for other filled materials prepared under high-pressure, including rare-earths, alkali or alkali-earth elements, all accepted as rattlers in filled skutterudites. A total thermal conductivity (κ) of 0.82 W m−1 K−1 is measured at 773 K for Eu0.02(1)Co4Sb12, below that of other filled skutterudites, which is promoted by the enhanced phonon scattering of Eu located at 12d sites. FE-SEM images showed large, homogeneous grains, well compacted after the high-pressure synthesis.

Reduced Thermal Conductivity in Nanostructured AgSbTe2 Thermoelectric Material, Obtained by Arc-Melting

AgSbTe₂ intermetallic compound is a promising thermoelectric material. It has also been described as necessary to obtain LAST and TAGS alloys, some of the best performing thermoelectrics of the last decades. Due to the random location of Ag and Sb atoms in the crystal structure, the electronic structure is highly influenced by the atomic ordering of these atoms and makes the accurate determination of the Ag/Sb occupancy of paramount importance. We report on the synthesis of polycrystalline AgSbTe₂ by arc-melting, yielding nanostructured dense pellets. SEM images show a conspicuous layered nanostructuration, with a layer thickness of 25-30 nm. Neutron powder diffraction data show that AgSbTe₂ crystalizes in the cubic Pm-3m space group, with a slight deficiency of Te, probably due to volatilization during the arc-melting process. The transport properties show some anomalies at ~600 K, which can be related to the onset temperature for atomic ordering. The average thermoelectric figure of merit remains around ~0.6 from ~550 up to ~680 K.

Detailed Structural Features of the Perovskite-Related Halide RbPbI3 for Solar Cell Applications

All-inorganic lead halide perovskites like CsPbBr₃, CsPbI₃, or RbPbI₃ are good replacements for the classical hybrid organic-inorganic perovskites like CH₃NH₃PbI₃, susceptible to fast degradation in the presence of humid air. They also exhibit outstanding light absorption properties suitable for solar energy applications. Here, we describe the synthesis of RbPbI₃ by mechanochemical procedures with green credentials, avoiding toxic or expensive organic solvents; this specimen exhibits excellent crystallinity. We report neutron powder diffraction data, essential to revisit some subtle structural features around room temperature (200-400 K). In all these regimes, the orthorhombic Pnma crystal structure is characterized by the presence along the b direction of the crystal of double rows of edge-sharing PbI₆ octahedra. The lone electron pairs of Pb²⁺ ions have a strong stereochemical effect on the PbI₆ octahedral distortion. The relative covalency of Rb-I versus Pb-I bonds shows that the Pb-I-related motions are more rigid than Rb-I-related vibrations, as seen in the Debye temperatures from the evolution of the anisotropic displacements. The optical gap, measured by diffuse reflectance UV-vis spectroscopy, is ∼2.51 eV and agrees well with ab initio calculations. The thermoelectric Seebeck coefficient is 3 orders of magnitude larger than that of other halide perovskites, with a value of ∼117,000 μV·K^-1 at 460 K.

Synergy of diffraction and spectroscopic techniques to unveil the crystal structure of antimonic acid

The elusive crystal structure of the so-called 'antimonic acid' has been investigated by means of robust and state-of-the-art techniques. The synergic results of solid-state magic-angle spinning nuclear magnetic resonance spectroscopy and a combined Rietveld refinement from synchrotron X-ray and neutron powder diffraction data reveal that this compound contains two types of protons, in a pyrochlore-type structure of stoichiometric formula (H₃O)_1.20(7)H_0.77(9)Sb₂O₆. Some protons belong to heavily delocalized H₃O⁺ subunits, while some H⁺ are directly bonded to the oxygen atoms of the covalent framework of the pyrochlore structure, with O-H distances close to 1 Å. A proton diffusion mechanism is proposed relying on percolation pathways determined by bond-valence energy landscape analysis. X-ray absorption spectroscopy results corroborate the structural data around Sb⁵⁺ ions at short-range order. Thermogravimetric analysis and differential scanning calorimetry endorsed the conclusions on the water content within antimonic acid. Additional 0.7 water molecules per formula were assessed as moisture water by thermal analysis.

Strongly reduced lattice thermal conductivity in Sn-doped rare-earth (M) filled skutterudites M x Co4Sb12-y Sn y , promoted by Sb-Sn disordering and phase segregation

CoSb3 thermoelectric skutterudite has been filled with rare-earth metals (M = La, Ce, Yb) and partially doped with Sn in specimens of M x Co4Sb12-y Sn y stoichiometry. This has been achieved under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. A structural investigation using synchrotron X-ray diffraction data reveals a phase segregation in twin skutterudite phases with filling fraction fluctuation and different unit-cell sizes. As a result of three effects acting as phonon scatterers, namely the rattling effect of M at the wide 8a cages of the cubic Im3̄ structure, the phase segregation, and the intrinsic disorder introduced by Sn substitution at the Sb sublattice, the total thermal conductivity (κ) dramatically falls to reach minimum values under 2 W m-1 K-1, well below those typically exhibited by other thermoelectric materials based upon single-filled skutterudites. The power factor is substantially enhanced to 1.11 mW m-1 K-2 in Yb0.5Co4Sb11.6Sn0.4 with respect to the unfilled composition, as a result of the charge transfer promoted by the filler.

Unveiling the Structural Behavior under Pressure of Filled M0.5Co4Sb12 (M = K, Sr, La, Ce, and Yb) Thermoelectric Skutterudites

Skutterudite-type compounds based on □Co₄Sb₁₂ pnictide are promising for thermoelectric application due to their good Seebeck values and high carrier mobility. Filling the 8a voids (in the cubic space group Im3̅) with different elements (alkali, alkali earth, and rare earth) helps to reduce the thermal conductivity and thus increases the thermoelectric performance. A systematic characterization by synchrotron X-ray powder diffraction of different M-filled Co₄Sb₁₂ (M = K, Sr, La, Ce, and Yb) skutterudites was carried out under high pressure in the range ∼0–12 GPa. The isothermal equations of state (EOS) were obtained in this pressure range and the Bulk moduli (B₀) were calculated for all the filled skutterudites, yielding unexpected results. A lattice expansion due to the filler elements fails in the description of the Bulk moduli. Topochemical studies of the filler site environment exhibited a slight disturbance and an increased ionic character when the filler is incorporated. The mechanical properties by means of Bulk moduli resulted in being sensitive to the presence of filler atoms inside the skutterudite voids, being affected by the covalent/ionic exchange of the Co–Sb and Sb–Sb bonds.

High-pressure studies in the range ∼0−12 GPa were carried out for M-filled Co₄Sb₁₂ (M = K, Sr, La, Ce, and Yb) skutterudites. The isothermal equations of state (EOS) were obtained and the Bulk moduli (B₀) were calculated, yielding unexpected results. Topochemical studies of the filler site environment exhibited a slight disturbance and an increased ionic character when the filler is incorporated. (left) 3D structure and (right) Laplacian of electronic density isolines of the M−Sb and Sb−Sb interactions.

Structural Features, Anisotropic Thermal Expansion, and Thermoelectric Performance in Bulk Black Phosphorus Synthesized under High Pressure

Black phosphorus (BP) allotrope has an orthorhombic crystal structure with a narrow bandgap of 0.35 eV. This material is promising for 2D technology since it can be exfoliated down to one single layer: the well-known phosphorene. In this work, bulk BP was synthesized under high-pressure conditions at high temperatures. A detailed structural investigation using neutron and synchrotron X-ray diffraction revealed the occurrence of anisotropic strain effects on the BP lattice; the combination of both sets of diffraction data allowed visualization of the lone electron pair 3s². Temperature-dependent neutron diffraction data collected at low temperature showed that the a axis (zigzag) exhibits a quasi-temperature-independent thermal expansion in the temperature interval from 20 up to 150 K. These results may be a key to address the anomalous behavior in electrical resistivity near 150 K. Thermoelectric properties were also provided; low thermal conductivity from 14 down to 6 Wm^-1K^-1 in the range 323-673 K was recorded in our polycrystalline BP, which is below the reported values for single-crystals in literature.

Influence of Nanostructuration on PbTe Alloys Synthesized by Arc-Melting

PbTe-based alloys have the best thermoelectric properties for intermediate temperature applications (500-900 K). We report on the preparation of pristine PbTe and two doped derivatives (Pb0.99Sb0.01Te and Ag0.05Sb0.05Pb0.9Te, so-called LAST18) by a fast arc-melting technique, yielding nanostructured polycrystalline pellets. XRD and neutron powder diffraction (NPD) data assessed the a slight Te deficiency for PbTe, also yielding trends on the displacement factors of the 4a and 4b sites of the cubic Fm-3m space group. Interestingly, SEM analysis shows the conspicuous formation of layers assembled as stackings of nano-sheets, with 20-30 nm thickness. TEM analysis shows intra-sheet nanostructuration on the 50 nm scale in the form of polycrystalline grains. Large numbers of grain boundaries are created by this nanostructuration and this may contribute to reduce the thermal conductivity to a record-low value of 1.6 Wm-1K-1 at room temperature. In LAST18, a positive Seebeck coefficient up to 600 μV K-1 at 450 K was observed, contributing further towards improving potential thermoelectric efficiency.

Familial hypokalemia-hypomagnesemia or Gitelman's syndrome: a further case

A woman aged 33 years presented hypokalemia and hypomagnesemia associated with renal potassium and magnesium wasting. Her mean 24-hour urinary calcium excretion was strikingly low despite normocalcemia, normal creatinine clearance, normal serum PTH and calcitriol. Normal distal fractional chloride reabsorption [CH2O/(CH2O + CCl)] was noted during water load but was reduced during hypotonic saline infusion. In response to intravenous furosemide (1 mg/kg), the patient showed significant increments in sodium, chloride and magnesium excretion as well as abolition of hypocalciuria. The association of renal calcium transport from magnesium transport together with exaggerated natriuresis after furosemide suggests the presence of a defect in the distal tubule rather than in the loop of Henle. We propose that our patient is affected by the syndrome of primary renotubular hypomagnesemia-hypokalemia with hypocalciuria, known as Gitelman's syndrome.