Influence of the Outflow Graft Angular Position on the Outcomes in Patients With a Left Ventricular Assist Device

This study aimed to explore the potential impact of the angular position of the outflow graft on thromboembolic events and aortic valve regurgitation in people with a left ventricular assist device (LVAD). We analyzed contrast computed tomography (CT) data of patients with LVAD implantation between 2016 and 2021. Three-dimensional reconstructions of the outflow graft and aortic arch were performed to calculate the horizontal (azimuth) angle and vertical (polar) angle, as well as the relative distance between the outflow graft, aortic valve, and brachiocephalic artery. Among 59 patients (median age 57, 68% male), a vertical angle ≥107° correlated significantly with increased cerebrovascular accidents (hazard ratio [HR]: 5.8, 95% confidence interval [CI]: 1.3-26.3, p = 0.022) and gastrointestinal bleeding (HR: 3.4, 95% CI: 1.0-11.2, p = 0.049) during a median 25 month follow-up. No significant differences were found between the vertical angle and aortic valve regurgitation or survival. The horizontal angle and relative distance did not show differences regarding clinical adverse events. This study emphasizes the importance of the LVAD outflow graft angular position to prevent life-threatening thromboembolic events. This study suggests the need for prospective research to further validate these findings.

Aortic arch branching variations and risk of cerebrovascular accidents in patients with a left ventricular assist device

AIMS

This retrospective study investigated the association between anatomical variations in the aortic arch branching and adverse events, including the risk of cerebrovascular accidents (CVAs), in patients with a left ventricular assist device (LVAD).

METHODS

Medical charts were reviewed for all patients with HeartMate 3 LVAD support at our center from 2016 to 2021. Computed tomography scans were evaluated to categorize the variations in the aortic arch branching based on seven different types, as described in the literature.

RESULTS

In total, 101 patients were included: 86 (85.1%) with a normal branching pattern and 15 (14.9%) with an anatomical variation. The following variations were observed: eight (7.9%) with a bovine arch and seven (6.9%) with a left vertebral arch. The median age was 57 years, 77.2% were men, and the median follow-up was 25 months. No difference was found in the rate of early (< 30 days) re-exploration due to bleeding after LVAD implantation. The rate of CVA and mortality did not differ significantly between patients with a normal arch or an anatomical variation during follow-up, with hazard ratios of 1.47 [95% confidence interval (CI): 0.48-4.48; P = 0.495] and 0.69 (95% CI: 0.24-1.98; P = 0.489), respectively.

CONCLUSION

This preliminary study showed no differences in early and long-term adverse events, including CVA, when comparing patients with a variation in the aortic arch branching to patients with a normal aortic arch. However, knowledge of the variations in aortic arch branching could be meaningful during cardiac surgery for potential differences in surgical events in the perioperative period.

Virtual reality simulation as a training tool for perfusionists in extracorporeal circulation: Establishing face and content validity

Objective

We conducted a prospective study to assess the face and content validity of a new virtual reality (VR) extracorporeal circulation simulator (ECC) developed for perfusionists to facilitate training and practice. We evaluated the opinions of students and staff members about the feasibility of the simulation. The 2 groups consisted of experts (qualified perfusionists) and novices (trainee perfusionists).

Methods

Perfusionists (n = 12 experts and n = 11 trainees) received instructions on how to use the VR simulator and then proceeded to perform the start of cardiopulmonary bypass in the VR environment. Participants then completed a Usefulness, Satisfaction, and Ease of Use Questionnaire. The questions were rated on a 5-point Likert scale, ranging from 1 (fully disagree) to 5 (fully agree), to assess the face validity and content validity of this simulator.

Results

Participants reported a predominantly positive experience with the VR-ECC simulator, with 96% (n = 22) agreeing that the simulator was a useful way of training ECC scenarios. All participants found it easy to interact with the software (100%, n = 23), and 82% of students (n = 9) believed it helped them remember the steps involved with initiating ECC. Finally, (87% [n = 20]) of participants believed the image quality and depth perception were good.

Conclusions

Our next-generation simulator was valid for face and content constructs, and almost all participants found it to be a useful way of training for ECC scenarios. This simulator represents a first step toward truly blended digital learning and a new interactive, flexible, and innovative modality for perfusion training.

Optimized preoperative planning of double outlet right ventricle patients by 3D printing and virtual reality: a pilot study

OBJECTIVES

In complex double outlet right ventricle (DORV) patients, the optimal surgical approach may be difficult to assess based on conventional 2-dimensional (2D) ultrasound (US) and computed tomography (CT) imaging. The aim of this study is to assess the added value of 3-dimensional (3D) printed and 3D virtual reality (3D-VR) models of the heart used for surgical planning in DORV patients, supplementary to the gold standard 2D imaging modalities.

METHODS

Five patients with different DORV subtypes and high-quality CT scans were selected retrospectively. 3D prints and 3D-VR models were created. Twelve congenital cardiac surgeons and paediatric cardiologists, from 3 different hospitals, were shown 2D-CT first, after which they assessed the 3D print and 3D-VR models in random order. After each imaging method, a questionnaire was filled in on the visibility of essential structures and the surgical plan.

RESULTS

Spatial relationships were generally better visualized using 3D methods (3D printing/3D-VR) than in 2D. The feasibility of ventricular septum defect patch closure could be determined best using 3D-VR reconstructions (3D-VR 92%, 3D print 66% and US/CT 46%, P < 0.01). The percentage of proposed surgical plans corresponding to the performed surgical approach was 66% for plans based on US/CT, 78% for plans based on 3D printing and 80% for plans based on 3D-VR visualization.

CONCLUSIONS

This study shows that both 3D printing and 3D-VR have additional value for cardiac surgeons and cardiologists over 2D imaging, because of better visualization of spatial relationships. As a result, the proposed surgical plans based on the 3D visualizations matched the actual performed surgery to a greater extent.

Virtual Reality Simulator versus Conventional Advanced Life Support Training for Cardiopulmonary Resuscitation Post-Cardiac Surgery: A Randomized Controlled Trial

External chest compressions are often ineffective for patients arresting after cardiac surgery, for whom emergency resternotomy may be required. A single-blinded randomized controlled trial (RCT) was performed, with participants being randomized to a virtual reality (VR) Cardiac Surgical Unit Advanced Life Support (CSU-ALS) simulator training arm or a conventional classroom CSU-ALS training arm. Twenty-eight cardiothoracic surgery (CTS) residents were included and subsequently assessed in a moulage scenario in groups of two, either participating as a leader or surgeon. The primary binary outcomes were two time targets: (1) delivering three stacked shocks within 1 min and (2) resternotomy within 5 min. Secondary outcomes were the number of protocol mistakes made and a questionnaire after the VR simulator. The conventional training group administered stacked shocks within 1 min in 43% (n = 6) of cases, and none in the VR group reached this target, missing it by an average of 25 s. The resternotomy time target was reached in 100% of the cases (n = 14) in the conventional training group and in 83% of the cases (n = 10) in the VR group. The VR group made 11 mistakes in total versus 15 for those who underwent conventional training. Participants reported that the VR simulator was useful and easy to use. The results show that the VR simulator can provide adequate CSU-ALS training. Moreover, VR training results in fewer mistakes suggesting that repetitive practice in an immersive environment improves skills.

Virtual Reality Simulation Training for Cardiopulmonary Resuscitation After Cardiac Surgery: Face and Content Validity Study

BACKGROUND

Cardiac arrest after cardiac surgery commonly has a reversible cause, where emergency resternotomy is often required for treatment, as recommended by international guidelines. We have developed a virtual reality (VR) simulation for training of cardiopulmonary resuscitation (CPR) and emergency resternotomy procedures after cardiac surgery, the Cardiopulmonary Resuscitation Virtual Reality Simulator (CPVR-sim). Two fictive clinical scenarios were used: one case of pulseless electrical activity (PEA) and a combined case of PEA and ventricular fibrillation. In this prospective study, we researched the face validity and content validity of the CPVR-sim.

OBJECTIVE

We designed a prospective study to assess the feasibility and to establish the face and content validity of two clinical scenarios (shockable and nonshockable cardiac arrest) of the CPVR-sim partly divided into a group of novices and experts in performing CPR and emergency resternotomies in patients after cardiac surgery.

METHODS

Clinicians (staff cardiothoracic surgeons, physicians, surgical residents, nurse practitioners, and medical students) participated in this study and performed two different scenarios, either PEA or combined PEA and ventricular fibrillation. All participants (N=41) performed a simulation and completed the questionnaire rating the simulator's usefulness, satisfaction, ease of use, effectiveness, and immersiveness to assess face validity and content validity.

RESULTS

Responses toward face validity and content validity were predominantly positive in both groups. Most participants in the PEA scenario (n=26, 87%) felt actively involved in the simulation, and 23 (77%) participants felt in charge of the situation. The participants thought it was easy to learn how to interact with the software (n=24, 80%) and thought that the software responded adequately (n=21, 70%). All 15 (100%) expert participants preferred VR training as an addition to conventional training. Moreover, 13 (87%) of the expert participants would recommend VR training to other colleagues, and 14 (93%) of the expert participants thought the CPVR-sim was a useful method to train for infrequent post-cardiac surgery emergencies requiring CPR. Additionally, 10 (91%) of the participants thought it was easy to move in the VR environment, and that the CPVR-sim responded adequately in this scenario.

CONCLUSIONS

We developed a proof-of-concept VR simulation for CPR training with two scenarios of a patient after cardiac surgery, which participants found was immersive and useful. By proving the face validity and content validity of the CPVR-sim, we present the first step toward a cardiothoracic surgery VR training platform.

Virtual Reality in the Preoperative Planning of Adult Aortic Surgery: A Feasibility Study

Background: Complex aortic anatomy needs careful preoperative planning in which a patient-tailored approach with novel immersive techniques could serve as a valuable addition to current preoperative imaging. This pilot study aimed to investigate the technical feasibility of virtual reality (VR) as an additional imaging tool for preoperative planning in ascending aortic surgery. Methods: Ten cardiothoracic surgeons were presented with six patients who had each undergone a recent repair of the ascending aorta. Two-dimensional computed tomography images of each patient were assessed prior to the VR session. After three-dimensional (3D) VR rendering and 3D segmentation of the ascending aorta and aortic arch, the reconstructions were analyzed by each surgeon in VR via a head-mounted display. Each cardiothoracic surgeon completed a questionnaire after each planning procedure. The results of their assessments were compared to the performed operations. The primary endpoint of the present study was a change of surgical approach from open to clamped distal anastomosis, and vice versa. Results: Compared with conventional imaging, 80% of surgeons found that VR prepared them better for surgery. In 33% of cases (two out of six), the preoperative decision was adjusted due to the 3D VR-based evaluation of the anatomy. Surgeons rated CardioVR usefulness, user-friendliness, and satisfaction with median scores of 3.8 (IQR: 3.5–4.1), 4.2 (IQR: 3.8–4.6,) and 4.1 (IQR: 3.8–4.7) on a five-point Likert scale, respectively. Conclusions: Three-dimensional VR imaging was associated with improved anatomical understanding among surgeons and could be helpful in the future preoperative planning of ascending aortic surgery.

3D Virtual Reality Imaging of Major Aortopulmonary Collateral Arteries: A Novel Diagnostic Modality

BACKGROUND

Major aortopulmonary collateral arteries (MAPCAs), as seen in patients with pulmonary atresia, are arteries that supply blood from the aorta to the lungs and often require surgical intervention. To achieve complete repair in the least number of interventions, optimal imaging of the pulmonary arterial anatomy and MAPCAs is critical. 3D virtual reality (3D-VR) is a promising and upcoming new technology that could potentially ameliorate current imaging shortcomings.

METHODS

A retrospective, proof-of-concept study was performed of all operated patients with pulmonary atresia and MAPCAs at our center between 2010 and 2020 with a preoperative computed tomography (CT) scan. CT images were reviewed by two congenital cardiac surgeons in 3D-VR to determine additional value of VR for MAPCA imaging compared to conventional CT and for preoperative planning of MAPCA repair.

RESULTS

3D-VR visualizations were reconstructed from CT scans of seven newborns where the enhanced topographic anatomy resulted in improved visualization of MAPCA. In addition, surgical planning was improved since new observations or different preoperative plans were apparent in 4 out of 7 cases. After the initial setup, VR software and hardware was reported to be easy and intuitive to use.

CONCLUSIONS

This study showed technical feasibility of 3D-VR reconstruction of children with immersive visualization of topographic anatomy in an easy-to-use format leading to an improved surgical planning of MAPCA surgery. Future prospective studies are required to investigate the clinical benefits in larger populations.

Multidisciplinary Virtual 3D Planning of a Forequarter Amputation with Chest Wall Resection

We present a case of a 74-year-old male patient, with a history of a squamous cell carcinoma in the left axilla. The patient underwent a multidisciplinary surgical resection through an extended forequarter amputation with thoracic wall resection and reconstruction. With regard to the complexity of the case, 3D virtual reality-based patient-specific reconstructions were used as a supplemental tool to conventional computed tomography-imaging in order to plan the procedure. With this report, we aim to stimulate further research to improve and automate the workflow and to bring virtual and augmented reality reconstructions into the surgical theatre of the future.