Distinct thermoresponsive behaviour of oligo- and poly-ethylene glycol protected gold nanoparticles in concentrated salt solutions

In this work, the methoxy terminated oligo- and polyethylene glycol of different chain lengths (EGn, n = 7, 18, 45 and 136) is grafted on AuNP surfaces under conditions where they attain maximum grafting densities. These EGn-AuNPs gain stability relative to the pristine c-AuNPs in aqueous solutions and in a wide temperature interval and they form stable suspensions in solutions of high NaCl concentrations. To show the thermoresponsive properties of these EGn-AuNPs, temperature titration experiments are carried out in the presence of increasing amounts of salts. The concentrations of NaCl are chosen by checking the stability of EGn-AuNPs at room temperature and choosing the highest concentrations that allow them to form stable suspensions. The analysis of the temperature titration experiments monitored by UV-visible spectroscopy and dynamic light scattering allows us to establish the existence of transitions from individual to assembled nanoparticles, the reversibility of the temperature transitions and hysteretic behaviour in these systems. While EG7-AuNPs only show reversible temperature transitions in the presence of 5 mM NaCl, EG18-AuNPs do up to 1 M NaCl, becoming only partially reversible in 2 M NaCl. The titrations of EG45-AuNPs in 3 and 5 M NaCl show irreversible temperature transitions. Finally, EG136-AuNPs present a complex and interesting behaviour with two temperature transitions, the first one showing hysteresis and the second being reversible.

Hemoglobin becomes electroactive upon interaction with surface-protected Au nanoparticles

In this work, we report on the electrochemical behavior of bioconjugates prepared with gold nanoparticles (AuNP) capped with three different molecular layers (citrate anions, 6-mercaptopurine and ω-mercaptoundecanoic acid) and the protein hemoglobin (Hb). Freshly formed bioconjugates are deposited on a glassy carbon electrode and assayed for electroactivity. A pair of redox peaks with formal potential at -0.37V is obtained, in contrast with the free Hb protein that is inactive on the glassy carbon substrate. The redox response is typical for quasi-reversible processes allowing the determination of the electron transfer rate constant for the three bioconjugates. Additional evidence of the structural integrity of protein upon forming the bioconjugate is obtained by monitoring the electrochemical response of the Hb heme Fe(III)/Fe(II) redox couple as a function of solution pH. Moreover, the Hb forming the protein corona around the AuNPs show good electrocatalytic activity for the reduction of hydrogen peroxide and oxygen. It has been found that only the first layer of Hb surrounding the AuNPs are electroactive, although some part of the second layer also contribute, pointing to the role of the AuNP in the electrochemical response.

Hemoglobin bioconjugates with surface-protected gold nanoparticles in aqueous media: The stability depends on solution pH and protein properties

The identification of the factors that dictate the formation and physicochemical properties of protein-nanomaterial bioconjugates are important to understand their behavior in biological systems. The present work deals with the formation and characterization of bioconjugates made of the protein hemoglobin (Hb) and gold nanoparticles (AuNP) capped with three different molecular layers (citrate anions (c), 6-mercaptopurine (MP) and ω-mercaptoundecanoic acid (MUA)). The main focus is on the behavior of the bioconjugates in aqueous buffered solutions in a wide pH range. The stability of the bioconjugates have been studied by UV-visible spectroscopy by following the changes in the localized surface resonance plasmon band (LSRP), Dynamic light scattering (DLS) and zeta-potential pH titrations. It has been found that they are stable in neutral and alkaline solutions and, at pH lower than the protein isoelectric point, aggregation takes place. Although the surface chemical properties of the AuNPs confer different properties in respect to colloidal stability, once the bioconjugates are formed their properties are dictated by the Hb protein corona. The protein secondary structure, as analyzed by Attenuated total reflectance infrared (ATR-IR) spectroscopy, seems to be maintained under the conditions of colloidal stability but some small changes in protein conformation take place when the bioconjugates aggregate. These findings highlight the importance to keep the protein structure upon interaction with nanomaterials to drive the stability of the bioconjugates.

Formation and Dissolution Processes of the 6-Thioguanine (6TG) Self-Assembled Monolayer. A Kinetic Study

This is a report on the kinetics of the destruction and formation processes of the 6-thioguanine self-assembled monolayer (6TG SAM) on a mercury electrode from acid solutions by chronoamperometry. The destruction of the 6TG SAM that has been previously formed under open circuit potential conditions is carried out by stepping the potential from an initial value where the chemisorbed layer is stable up to potentials where the molecules are no longer chemisorbed. The destruction of the SAM has been described by a model that involves three types of contributions: (i) a Langmuir-type adsorption process, (ii) a 2D nucleation mechanism followed by a growth controlled by surface diffusion, and (iii) a 2D nucleation mechanism followed by a growth at a constant rate. The nonlinear fit of the experimental transients by using this procedure allows the quantitative determination of the individual contributions to the overall process. The kinetics of the formation process is studied under electrochemical conditions. The chronoamperometric experiment allows us to monitor the early stages of 6TG SAM formation. The implications of the physisorbed state at low potentials in the type of monolayer formation and destruction processes as well as the influence of temperature are also discussed.

Modeling of eicosapentaenoic acid (EPA) production from Phaeodactylum tricornutum cultures in tubular photobioreactors. Effects of dilution rate, tube diameter, and solar irradiance

A model for the prediction of eicosapentaenoic acid (EPA) productivity from Phaeodactylum tricornutum cultures that takes into account the existence of photolimitation and photoinhibition of growth under outdoor conditions is presented. The effects of the external irradiance on the culture surface, the average irradiance inside the culture, and the light regime at which the cells are exposed on pigments and EPA content are studied. The chlorophyll content decreases exponentially with the average irradiance, whereas the carotenoids content increases linearly with the external irradiance due to a higher extension of photoinhibition. A decrease in the fatty acid content of the biomass with irradiance on reactor surface is observed when photoinhibition becomes relevant. The average irradiance within the culture mainly influenced the fatty acid profile of the biomass. As the average irradiance becomes higher, percentages of saturated and monounsaturated fatty acids decrease, increasing the portion of EPA. By taking into account the different relationships among pigment and EPA content with the irradiance, the variation in EPA productivity over the year can be simulated as a function of average and external irradiance. For the two photobioreactors employed the maximum EPA productivity is attained in spring and fall (30 mg L(-1) day(-1) for tube diameter 0. 06 m and 50 mg L(-1) day(-1) for tube diameter 0.03 m). In winter, the biomass productivity is limited by low light availability although the EPA content is maximum. In summer, the biomass productivity is higher although the EPA content diminished by photoinhibition; the higher the dilution rate, the lower the minimum. Thus, the conditions that increase the biomass productivity and the polyunsaturated fatty acids content are in opposition, the optimum being reached by operating under photolimitation with high growth rates in order to produce a high proportion of polyunsaturated fatty acids.

Solution structure determination by two-dimensional 1H NMR of omega-conotoxin MVIID, a calcium channel blocker peptide

The three-dimensional structure of omega-conotoxin MVIID has been determined in aqueous solution by two-dimensional 1H NMR techniques. A total of 267 relevant upper-bound distance restraints were used to obtain a family of convergent structures using molecular dynamics methods. A standard simulated annealing protocol using the XPLOR program included in ARIA provided a total of 18 final structures. The averaged RMSD between these structures and the mean atomic coordinates was 0.8 +/- 0.3 A for the backbone atoms. The highest mobility was observed in the segments between residues 10 to 13, comprising Tyr 13, one of the residues shown to be important for binding of omega-conotoxin GVIA and MVIIA to N-type calcium channels. The three-dimensional structure is stabilised by the three disulfide bonds and includes a short antiparallel beta-strand between residues 5-8, 23-25 and 19-21. The folding for this non-N-type calcium channel blocker is similar to that previously calculated for omega-conotoxins GVIA, MVIIA and MVIIC. This suggests the disulfide bond pattern fixes the structure. The reported three-dimensional information can be used to advantage in order to highlight the structural parameters involved in discrimination among calcium channel subtypes.

Modeling of biomass productivity in tubular photobioreactors for microalgal cultures: effects of dilution rate, tube diameter, and solar irradiance

A macromodel is developed for estimating the year-long biomass productivity of outdoor cultures of microalga in tubular photobioreactors. The model evaluates the solar irradiance on the culture surface as a function of day of the year and the geographic location. In a second step, the geometry of the system is taken into account in estimating the average irradiance to which the cells are exposed. Finally, the growth rate is estimated as a function of irradiance, taking into account photoinhibition and photolimitation. The model interconnects solar irradiance (an environmental variable), tube diameter (a design variable), and dilution rate (an operating variable). Continuous cultures in two different tubular photobioreactors were analyzed using the macromodel. The biomass productivity ranged from 0.50 to 2.04 g L-1 d-1, and from 1.08 to 2. 76 g L-1 d-1, for the larger and the smaller tube diameter photobioreactors, respectively. The quantum yield ranged from 1.1 to 2.2 g E-1; the higher the incident solar radiation, the lower the quantum yield. Simultaneous photolimitation and photoinhibition of outdoor cultures was observed. The model reproduced the experimental results with less than 20% error. If photoinhibition was neglected, and a growth model that considered only photolimitation was used to fit the data, the error increased to 45%, thus reflecting the inadequacy of previous outdoor growth models that disregard photoinhibition. Copyright 1998 John Wiley & Sons, Inc.

Electrochemical evidence on the molten globule conformation of cytochrome c

To explore a new approach for characterizing the molten globule conformation, cyclic voltammetric studies of salt induced transitions at acidic pH of cyt c have been carried out. The use of modified electrodes has made the observation of direct electrochemistry in native cyt c possible. However, most of these electrodes do not show reversible responses at acidic pH, due to the fact that, for this system, a deprotonated electrode surface is needed. In these studies, we have used a 6-mercaptopurine and cysteine-modified gold electrodes which are effective for direct rapid electron transfer to cyt c, even in acid solutions. The change in the absorption bands of cyt c are used to monitor the conformational states and, hence, to compare the voltammetric results. Under the experimental conditions where the A state of cyt c is obtained, a reversible voltammetric signal is observed. The midpoint peak potentials are found to be very close to the formal potential of native cyt c. Results are discussed in terms of a cooperative two-state transition between the acid unfolded and the globular acidic states of cyt c. This finding establishes, for the first time, the similarity of both the native and the molten globule-like conformations in terms of its redox properties.