Structure analysis of a buried interface between organic and porous inorganic layers using spin-contrast-variation neutron reflectivity

This work demonstrates the advantage of spin-contrast-variation neutron reflectivity (NR) for the structure analysis of a buried interface in a bilayer film comprising organic and inorganic layers of acrylic urethane resin and methylated silica (MePDS), derived from methyl-group-substituted perhydropolysilazane. As the proton polarization P H changed from 0 to ±24%, the NR curve of the bilayer film varied significantly. These NR curves were not reproduced using global fitting with a standard bilayer model. The oscillation in the NR curve at P H = −24% was shifted slightly and non-negligibly from the fitting curve using the best-fit structure parameters for the curve at P H = 0%. It was found from the shift of the oscillation that the density of the MePDS layer decreased within several nanometres of the interface, but the resin did not permeate the low-density MePDS layer.

Direct Probe of the Ferromagnetic Proximity Effect at the Interface of SnTe/Fe Heterostructure by Polarized Neutron Reflectometry

Introducing magnetic order into a topological insulator (TI) system has attracted much attention with an expectation of realizing exotic phenomena such as the quantum anomalous Hall effect (QAHE) and axion insulator states. The magnetic proximity effect (MPE) is one of the promising schemes to induce the magnetic order on the surface of a TI without introducing disorder accompanied by doping magnetic impurities in the TI. In this study, we investigate the MPE at the interface of a heterostructure consisting of the topological crystalline insulator (TCI) SnTe and Fe by employing polarized neutron reflectometry. The ferromagnetic order penetrates ∼2.2 nm deep into the SnTe layer from the interface with Fe, which persists up to room temperature. This is induced by the MPE on the surface of the TCI preserving the coherent topological states without introducing the disorder by doping magnetic impurities. This would open up a way for realizing next-generation spintronics and quantum computational devices.

Heavy water recycling for producing deuterium compounds

Deuterium oxide (D₂O) is a special variety of water that serves as a crucial resource in a range of applications, but it is a costly and unusual resource. We therefore developed a new D₂O concentration system that combines a polymer electrolyte water electrolyzer and a catalytic combustor for recycling used D₂O. In this study, 1.6 L of used D₂O, with a concentration of 93.1%, was electrolyzed for 13.6 h to obtain 0.62 L of D₂O, with a concentration of 99.3%. In addition, the recombined water obtained by burning electrolytic gas using the catalytic combustor was also electrolyzed for 8.8 h to obtain 0.22 L of D₂O, with a concentration of 99.0%. The estimated separation factor of this electrolyzer at 25 °C was 3.6, which is very close to the equilibrium constant of the water/hydrogen isotope exchange reaction. Recycled D₂O was used as a deuterium source for the deuteration reaction of sodium octanoate, and 93.6% deuterated sodium octanoate was obtained. It is concluded that there were no impurities in the recycled D₂O that interfered with the deuteration reaction. These results can lead to the development of a cost-effective deuteration method for these materials.

Heavy water recycling for the production of deuterium compounds.

Continuous Mesoporous Aluminum Oxide Film with Perpendicularly Oriented Mesopore Channels

Mesoporous aluminum oxide (MAO) films with perpendicularly oriented cylindrical mesopores (pore diameter: ca. 10 nm) were successfully deposited on a glass substrate by a surfactant-templating approach using aluminum nitrate as an aluminum source. The perpendicular orientation of mesopores was confirmed by grazing-incidence small-angle X-ray scattering and neutron reflection experiments. The thickness of the MAO film was around 100 nm, with a surface roughness of less than 6 nm. Since the inner surface of MAO pores was positively charged, negatively charged glucose oxidase molecules could be densely loaded into the cylindrical mesopores without significant loss of enzymatic activity. The present MAO film is potentially useful as an inorganic host material for an enzyme toward the development of a biocatalytic system.

Birch-Type Reduction of Arenes in 2-Propanol Catalyzed by Zero-Valent Iron and Platinum on Carbon

Catalytic arene reduction was effectively realized by heating in 2-propanol/water in the presence of Pt on carbon (Pt/C) and metallic Fe. 2-Propanol acted as a hydrogen source, obviating the need for flammable (and hence, dangerous and hard-to-handle) hydrogen gas, while metallic Fe acted as an essential co-catalyst to promote reduction. The chemical states of Pt and Fe in the reaction mixture were determined by X-ray absorption near-edge structure analysis, and the obtained results were used to suggest a plausible reaction mechanism, implying that catalytic reduction involved Pt- and Fe-mediated single-electron transfer and the dehydrogenation of 2-propanol.

Controlled deuterium labelling of imidazolium ionic liquids to probe the fine structure of the electrical double layer using neutron reflectometry

The electrical double layer structure formed in an ionic liquid electrolyte was determined by combining the neutron reflectivity and deuterium labelling techniques.

Design and characterization of a 2-(2′-hydroxyphenyl)benzimidazole-based Sr2+-selective fluorescent probe in organic and micellar solution systems

Fluorescence detection of Sr(ii) by Sr(ii)-selective fluorescent probe BIC and its complex formed in solution.