Evaluation of the effect of precursor ratios on the electrochemical performances of binder-free NiMn-phosphate electrodes for supercapattery

Binary metal phosphate electrodes have been widely studied for energy storage applications due to the synergistic effects of two different transition elements that able to provide better conductivity and stability. Herein, the battery-type binder-free nickel-manganese phosphate (NiMn-phosphate) electrodes were fabricated with different Ni:Mn precursor ratios via microwave-assisted hydrothermal technique for 5 min at 90 °C. Overall, NiMn3P electrode (Ni:Mn = 1:3) showed an outstanding electrochemical performance, displaying the highest specific (areal) capacity at 3 A/g of 1262.4 C/g (0.44 C/cm2), and the smallest charge transfer resistance of 108.8 Ω. The enhanced performance of NiMn3P electrode can be ascribed to the fully grown amorphous nature and small-sized flake and flower structures of NiMn3P electrode material on the nickel foam (NF) surface. This configuration offered a higher number of active sites and a larger exposed area, facilitating efficient electrochemical reactions with the electrolyte. Consequently, the NiMn3P//AC electrode combination was chosen to further investigate its performance in supercapattery. The NiMn3P//AC supercapattery exhibited remarkable energy density of 105.4 Wh/kg and excellent cyclic stability with 84.7% retention after 3000 cycles. These findings underscored the superior electrochemical performance of the battery-type binder-free NiMn3P electrode, and highlight its potential for enhancing the overall performance of supercapattery.

Molecular interactions of paraben family of pollutants with embryonic neuronal proteins of Danio rerio: A step ahead in computational toxicity towards adverse outcome pathway

The paraben family of endocrine disruptors exhibit persistent behaviours in aquatic matrices, having bio-accumulative effects and necessitating toxicity analysis and safe use, as well as prevention of food web penetration. In this study, the toxicity effects of 9 different parabens (Methyl, Ethyl, Propyl, Butyl, Heptyl, Isopropyl, Isobutyl, benzyl parabens and p-hydroxybenzoic acid) were studied against 17 neuronal proteins (Neurog1, Ascl1a, DLA, Syn2a, Ntn1a, Pitx2, and SoxB1, Her/Hes, Zic family) expressed during the early embryonic developmental stage of Danio rerio. The neuronal genes were selected as a biomarker to study the inhibitory effects on the cascade of genes expressed in the early developmental stage. The study uses trRossetta software to predict protein structures of neuronal genes, followed by structural refinement, energy minimisation, and active site prediction, evaluated using energy value, RC plot and ERRAT scores of PROCHECK and ERRAT programs. Compared to raw structures, highly confident predicted structures and quality scores were observed for refined protein with few exceptions. Based on the polarity and charge of the aminoacids, the probable pockets were identified using active site prediction, which were then used for molecular docking analysis. Further, the ADMET analysis, ligand likeliness and toxicological test revealed the paraben family of compounds as one of the most susceptible toxic and mutagenic compounds. The molecular docking results showed an interesting pattern of increasing binding affinity with increase in the carbon chains of paraben molecules. Benzyl Paraben showed higher binding affinities across all 17 neuronal proteins. Finally, gene co-occurrence/co-expression and protein-protein interaction studies using the STRING database depict that all proteins are functionally related and play essential roles in standard biological processes or pathways, conserved and expressed in diverse organisms. The interaction between paraben compounds and neuronal genes indicates high risks of inhibiting reactions in embryonic stages, emphasising the need for effective treatment measures and strict regulations.

Evidence of a Hardening in the Cosmic Ray Proton Spectrum at around 166 TeV Observed by the GRAPES-3 Experiment

We present the measurement of the cosmic ray proton spectrum from 50 TeV to 1.3 PeV using 7.81×10^{6} extensive air shower events recorded by the ground-based GRAPES-3 experiment between 1 January 2014 and 26 October 2015 with a live time of 460 day. Our measurements provide an overlap with direct observations by satellite and balloon-based experiments. The electromagnetic and muon components in the shower were measured by a dense array of plastic scintillator detectors and a tracking muon telescope, respectively. The relative composition of the proton primary from the air shower data containing all primary particles was extracted using the multiplicity distribution of muons which is a sensitive observable for mass composition. The observed proton spectrum suggests a spectral hardening at ∼166  TeV and disfavors a single power law description of the spectrum up to the Knee energy (∼3  PeV).

Analysis of the Effectiveness of 3D Printed Patient-Specific Implants for Reconstruction of Maxillary Defect Secondary to Mucormycosis

Introduction

Patients affected with mucormycosis of maxilla have been increasing following Covid-19 infections. We followed the reconstruction of the maxilla using 3D manufactured patient-specific implants. The additive manufacturing technology is capable of fabricating custom-made titanium implants precisely for oral and maxillofacial reconstructions.

Aim

To analyse the effectiveness of 3D manufactured patient-specific implants in the reconstruction of maxilla affected by mucormycosis secondary to Covid-19. Methodology: This study was conducted among 20 patients receiving patient-specific implants for surgical and prosthetic reconstruction of the maxilla. The parameters analysed at baseline, 3 months, 6 months, and 12 months were pain, implant exposure, infection, wound dehiscence, fit of implant, postoperative surgical rating scale, and patient experience evaluation rating scale.

Results

Inferential Statistics revealed a positive correlation.

Conclusion

From the present data, it can be concluded that within the limitations of the study, patient-specific implant systems are an effective treatment strategy for the reconstruction of the maxilla affected by mucormycosis secondary to Covid-19. More studies with larger sample size and longer follow-up periods are required to substantiate the results from the present study.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12663-023-01922-7.

Fabrication and characterization of graphene oxide-based polymer nanocomposite coatings, improved stability and hydrophobicity

In this study, acrylic-epoxy-based nanocomposite coatings loaded with different concentrations (0.5-3 wt.%) of graphene oxide (GO) nanoparticles were successfully prepared via the solution intercalation approach. The thermogravimetric analysis (TGA) revealed that the inclusion of GO nanoparticles into the polymer matrix increased the thermal stability of the coatings. The degree of transparency evaluated by the ultraviolet-visible (UV-Vis) spectroscopy showed that the lowest loading rate of GO (0.5 wt.%) had completely blocked the incoming irradiation, thus resulting in zero percent transmittance. Furthermore, the water contact angle (WCA) measurements revealed that the incorporation of GO nanoparticles and PDMS into the polymer matrix had remarkably enhanced the surface hydrophobicity, exhibiting the highest WCA of 87.55º. In addition, the cross-hatch test (CHT) showed that all the hybrid coatings exhibited excellent surface adhesion behaviour, receiving 4B and 5B ratings respectively. Moreover, the field emission scanning electron microscopy (FESEM) micrographs confirmed that the presence of the functional groups on the GO surface facilitated the chemical functionalization process, which led to excellent dispersibility. The GO composition up to 2 wt.% showed excellent dispersion and uniform distribution of the GO nanoparticles within the polymer matrix. Therefore, the unique features of graphene and its derivatives have emerged as a new class of nanofillers/inhibitors for corrosion protection applications.

Depth wide distribution and metabolic potential of chemolithoautotrophic microorganisms reactivated from deep continental granitic crust underneath the Deccan Traps at Koyna, India

Characterization of inorganic carbon (C) utilizing microorganisms from deep crystalline rocks is of major scientific interest owing to their crucial role in global carbon and other elemental cycles. In this study we investigate the microbial populations from the deep [up to 2,908 meters below surface (mbs)] granitic rocks within the Koyna seismogenic zone, reactivated (enriched) under anaerobic, high temperature (50°C), chemolithoautotrophic conditions. Subsurface rock samples from six different depths (1,679-2,908 mbs) are incubated (180 days) with CO₂ (+H₂) or HCO₃ ^- as the sole C source. Estimation of total protein, ATP, utilization of NO₃ ^- and SO₄ ^2- and 16S rRNA gene qPCR suggests considerable microbial growth within the chemolithotrophic conditions. We note a better response of rock hosted community towards CO₂ (+H₂) over HCO₃ ^-. 16S rRNA gene amplicon sequencing shows a depth-wide distribution of diverse chemolithotrophic (and a few fermentative) Bacteria and Archaea. Comamonas, Burkholderia-Caballeronia-Paraburkholderia, Ralstonia, Klebsiella, unclassified Burkholderiaceae and Enterobacteriaceae are reactivated as dominant organisms from the enrichments of the deeper rocks (2335-2,908 mbs) with both CO₂ and HCO₃ ^-. For the rock samples from shallower depths, organisms of varied taxa are enriched under CO₂ (+H₂) and HCO₃ ^-. Pseudomonas, Rhodanobacter, Methyloversatilis, and Thaumarchaeota are major CO₂ (+H₂) utilizers, while Nocardioides, Sphingomonas, Aeromonas, respond towards HCO₃ ^-. H₂ oxidizing Cupriavidus, Hydrogenophilus, Hydrogenophaga, CO₂ fixing Cyanobacteria Rhodobacter, Clostridium, Desulfovibrio and methanogenic archaea are also enriched. Enriched chemolithoautotrophic members show good correlation with CO₂, CH₄ and H₂ concentrations of the native rock environments, while the organisms from upper horizons correlate more to NO₃ ^-, SO₄ ^2- _, Fe and TIC levels of the rocks. Co-occurrence networks suggest close interaction between chemolithoautotrophic and chemoorganotrophic/fermentative organisms. Carbon fixing 3-HP and DC/HB cycles, hydrogen, sulfur oxidation, CH₄ and acetate metabolisms are predicted in the enriched communities. Our study elucidates the presence of live, C and H₂ utilizing Bacteria and Archaea in deep subsurface granitic rocks, which are enriched successfully. Significant impact of depth and geochemical controls on relative distribution of various chemolithotrophic species enriched and their C and H₂ metabolism are highlighted. These endolithic microorganisms show great potential for answering the fundamental questions of deep life and their exploitation in CO₂ capture and conversion to useful products.

Structure-property relationships in critically connected (GeTe4)100-x(As2Se3)x glasses

Thermal, optical, mechanical and structural studies were carried out on glasses in the pseudo-binary joint GeTe₄-As₂Se₃ prepared by a melt quenching method. (GeTe₄)_100-x(As₂Se₃)_x glasses in the entire composition range of 0 ≤ x ≤ 100 have an average coordination number (Z_av) = 2.4, where the glass forming ability is found to be maximum. In general, for Z_av ≤ 2.4, the glass transition is found to be dominated by the network connectivity and the chemical composition effects are minimal. Although Z_av of Ge₂₀Te₈₀ (GeTe₄) and As₂Se₃ (As₄₀Se₆₀) is 2.4, GeTe₄ is a poor glass former and As₂Se₃ is an excellent glass former. The glass-forming ability is expected to increase with the addition of As₂Se₃. Surprisingly, the glass forming ability is found to decrease with the initial addition of As₂Se₃ and then shows an increasing trend. Glass transition (T_g) shows a large variation from 175 °C for x = 0 to 108 °C for x = 30. Based on the variation in the properties, the tie-line can be divided into three regions: region I (0 ≤ x ≤ 20) where T_g shows a decreasing trend, region II (25 ≤ x ≤ 55) where T_g remains almost constant and region III (60 ≤ x ≤ 100) where T_g shows an increasing trend. Hardness measurement also shows a similar trend in the three regions. Thermal stability shows a continuous increase with the increase of As₂Se₃. The fragility index varies between 15 and 30 for all these glasses except for x = 0 (GeTe₄) indicating the strong nature of the melts containing As₂Se₃. Raman studies indicate that the glassy network is dominated mainly by GeTe_(4/2) in region I and in region III the network is dominated by AsSe_(3/2) based structures. Glasses in region II are found to be dominated by AsTe_3/2 based structures. This study brings out the dominance of chemical composition effects over the network connectivity in a critically coordinated network. These glasses are also found to transmit IR light up to 18 μm and offer a wide composition range to prepare bulk glasses to be useful for infrared applications.

Coexisting good neighbours: acoustic and calling microhabitat niche partitioning in two elusive syntopic species of balloon frogs, Uperodon systoma and U. globulosus (Anura: Microhylidae) and potential of individual vocal signatures

Background

Most amphibians use a repertoire of acoustic signals to propagate signals in social contexts. The description of these repertoires provides a key towards the understanding of the behaviour of individuals and the evolutionary functions of calls. Here, we assessed the variations in advertisement calls within and between two fossorial sympatric species, Uperodon systoma and Uperodon globulosus, that share their breeding season and breeding sites. For each species, we applied Beecher’s index of total information capacity (HS) for the individual vocal signature, determined the difference in call properties and demonstrated the segregation in the calling microhabitat niche between the two species.

Results

Our results demonstrated that the advertisement calls of U. systoma are pulsatile with a call rate of 3.00 ± 0.97 calls per second while those of U. globulosus are not pulsatile with a lower call rate of 0.53 ± 0.22 calls per second. For both species, the variations in call properties among individuals was higher than that within individual, a pattern consistent with that of other fossorial anurans. The body condition and air temperature did not significantly impact the call properties of either species. The outcome of the Beecher’s index (HS) showed that the calls of U. systoma can be used to identify 14 different individuals and the calls of U. globulosus can be used to identify 26 different individuals. The statistical analyses on the advertisement call of the two species showed a significant difference in the temporal properties as the call duration, and fall time and rise time were significantly different between the two species. Lastly, we successfully demonstrated that there is a clear segregation in calling site microhabitat between the two species, where U. globulosus calls floating close to the bank of the waterbody while U. systoma calls floating further away from the bank.

Conclusion

This study highlights the potential for pre-mating isolation, character displacement and assortative mating in two syntopic fossorial anurans, leading to association between acoustic, calling microhabitat niche and body index divergence as important behavioural and ecological traits.

Robot Assisted Laparoscopic Repair of Vesicovaginal Fistula: A Retrospective Study at a Tertiary Care Centre, Chennai, India

Introduction: Vesicovaginal Fistula (VVF) is the most common acquired fistula of the urinary tract in women. Robotic surgery is recently introduced for VVF repair and has benefits over conventional methods. Aim: To describe experience with robot-assisted laparoscopic repair of VVF in patients. Materials and Methods: This was a retrospective observational study conducted from February 2014 to February 2018, at Department of Urology, Apollo Main Hospital, Chennai, Tamil Nadu, India. The study included 24 patients who underwent robot-assisted laparoscopic VVF repair. After cystoscopy ureteric catheter was passed through the fistula and retrieved through vagina. Bilateral ureteric catheters were placed simultaneously with vaginal packing. Da Vinci Si robot was docked with patient in trendelenburg position. After trocar placement transperitoneally the fistula was approached. Through vertical or transverse cystotomy, fistula was identified. With the circumferential incision around the fistula, both the bladder and vagina was separated and the fistulous tract was excised. Bladder was closed vertically and vaginal opening was closed transversely interposing the Omentum. Statistical analyses were performed using the Statistical Package for Social Sciences (SPSS) version 20.0. Results: The mean age of participants was 40.33 years. Elective hysterectomy done for benign conditions (91.67%) was the major cause of VVF in patients followed by emergency hysterectomy (8.33%). All of the patients underwent adhesiolysis while two patients performed right ureteric re-implantation additionally. The median operative time was 127.50 minutes. The median duration of drain and hospital stay was three days each. Urethral Foley’s catheter removal done at 2-3 weeks based on operating surgeon’s preference and the mean duration of follow-up was 26 months. Conclusion: Robot-assisted laparoscopic VVF repair is convenient and an effective approach in the successful management of VVF in complex fistulas and recurrent cases.

Investigations on coronary artery plaque detection and subclassification using machine learning classifier

Coronary artery diseases are one of the high-risk diseases, which occur due to the insufficient blood supply to the heart. The different types of plaques formed inside the artery leads to the blockage of the blood stream. Understanding the type of plaques along with the detection and classification of plaques supports in reducing the mortality of patients. The objective of this study is to present a novel clustering method of plaque segmentation followed by wavelet transform based feature extraction. The extracted features of all different kinds of calcified and sub calcified plaques are applied to first train and test three machine learning classifiers including support vector machine, random forest and decision tree classifiers. The bootstrap ensemble classifier then decides the best classification result through a voting method of three classifiers. A training dataset including 64 normal CTA images and 73 abnormal CTA images is used, while a testing dataset consists of 111 normal CTA images and 103 abnormal CTA images. The evaluation metrics shows better classification rate and accuracy of 97.7%. The Sensitivity and Specificity rates are 97.8% and 97.5%, respectively. As a result, our study results demonstrate the feasibility and advantages of developing and applying this new image processing and machine learning scheme to assist coronary artery plaque detection and classification.

Arthroplasty Followed by Distraction Osteogenesis Versus Distraction Osteogenesis Followed by Arthroplasty in the Management of TMJ Ankylosis: A Comparative Study

Aim

To compare treatment outcome of arthroplasty followed by distraction osteogenesis (AFD) and distraction osteogenesis followed by arthroplasty (DFA) in the management of mandibular deficiencies in temporomandibular joint (TMJ) ankylosis.

Materials and methods

A total of 20 patients with TMJ Ankylosis were included in the study. Patients were randomly divided into two groups. Group 1 consisted of patients for whom arthroplasty was done prior to distraction osteogenesis (AFD) for the correction of deficient mandible. Group 2 included patients where distraction osteogenesis was performed prior to arthroplasty (DFA). The treatment outcome was assessed based on maximum interincisal distance, overjet, corpus length, ramus height, upper airway, lower airway, duration of the procedure and the complications for the treatment at the end of 3, 6 and 12 months.

Results

After the treatment was ended, the patients of both groups had increase in mouth opening and appearance was improved remarkably. There was general increase in all the parameters in both the groups. But at the end of 12 months, airway and the ramus height were more stable and the control of the proximal segment was superior in DFA group. Open bite was noticed in 2 cases of AFD group which was treated by elastics. There required additional surgery for the removal of distractors in the AFD Group. Establishing the airway during the surgery was easier in AFD group.

Conclusion

The study concludes that distraction followed by arthroplasty was a better procedure for the management of TMJ ankylosis owing to its stable results and less number of surgeries.

Study of anisotropic thermal conductivity in textured thermoelectric alloys by Raman spectroscopy

Polycrystalline p-type Sb_1.5Bi_0.5Te₃ (SBT) and n-type Bi₂Te_2.7Se_0.3 (BTS) compounds possessing layered crystal structure show anisotropic electronic and thermal transport properties. This research is in pursuit of better understanding the anisotropic thermal properties using Raman spectroscopy. A systematic Raman spectroscopic study of the hot-pressed pellet of the textured p-type SBT and n-type BTS is reported in both directions: parallel (‖) and perpendicular (⊥) to the pressing axis as a function of temperature and laser power. The first-order temperature coefficient, optical thermal conductivity, and phonon lifetime are qualitatively determined from the temperature and laser power-dependent frequency and full-width half maximum (FWHM) of Raman peaks (A¹ _1g, E² _g & A² _1g). Anisotropy in experimental phonon thermal conductivity in both directions is correlated with the approximated optical thermal conductivity, phonon lifetime and phonon anharmonicity. The anisotropy in phonon anharmonicity in both directions is explained by the modified Klemens-Hart-Aggarwal-Lax phonon decay model. In this study, the symmetric three-phonon scattering process is considered responsible for thermal transport in the temperature range of 300 to 473 K.

Cobalt Oxide Nanograins and Silver Nanoparticles Decorated Fibrous Polyaniline Nanocomposite as Battery-Type Electrode for High Performance Supercapattery

In this study, silver (Ag) and cobalt oxide (Co₃O₄) decorated polyaniline (PANI) fibers were prepared by the combination of in-situ aniline oxidative polymerization and the hydrothermal methodology. The morphology of the prepared Ag/Co₃O₄@PANI ternary nanocomposite was studied by scanning electron microscopy and transmission electron microscopy, while the structural studies were carried out by X-ray diffraction and X-ray photoelectron spectroscopy. The morphological characterization revealed fibrous shaped PANI, coated with Ag and Co₃O₄ nanograins, while the structural studies revealed high purity, good crystallinity, and slight interactions among the constituents of the Ag/Co₃O₄@PANI ternary nanocomposite. The electrochemical performance studies revealed the enhanced performance of the Ag/Co₃O₄@PANI nanocomposite due to the synergistic/additional effect of Ag, Co₃O₄ and PANI compared to pure PANI and Co₃O₄@PANI. The addition of the Ag and Co₃O₄ provided an extended site for faradaic reactions leading to the high specific capacity. The Ag/Co₃O₄@PANI ternary nanocomposite exhibited an excellent specific capacity of 262.62 C g⁻¹ at a scan rate of 3 mV s⁻¹. The maximum energy and power density were found to be 14.01 Wh kg⁻¹ and 165.00 W kg⁻¹, respectively. The cyclic stability of supercapattery (Ag/Co₃O₄@PANI//activated carbon) consisting of a battery type electrode demonstrated a gradual increase in specific capacity with a continuous charge–discharge cycle until ~1000 cycles, then remained stable until 2500 cycles and later started decreasing, thereby showing the cyclic stability of 121.03% of its initial value after 3500 cycles.

Fundamental Concepts of Hydrogels: Synthesis, Properties, and Their Applications

In the present review, we focused on the fundamental concepts of hydrogels-classification, the polymers involved, synthesis methods, types of hydrogels, properties, and applications of the hydrogel. Hydrogels can be synthesized from natural polymers, synthetic polymers, polymerizable synthetic monomers, and a combination of natural and synthetic polymers. Synthesis of hydrogels involves physical, chemical, and hybrid bonding. The bonding is formed via different routes, such as solution casting, solution mixing, bulk polymerization, free radical mechanism, radiation method, and interpenetrating network formation. The synthesized hydrogels have significant properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. These properties are substantial for electrochemical and biomedical applications. Furthermore, this review emphasizes flexible and self-healable hydrogels as electrolytes for energy storage and energy conversion applications. Insufficient adhesiveness (less interfacial interaction) between electrodes and electrolytes and mechanical strength pose serious challenges, such as delamination of the supercapacitors, batteries, and solar cells. Owing to smart and aqueous hydrogels, robust mechanical strength, adhesiveness, stretchability, strain sensitivity, and self-healability are the critical factors that can identify the reliability and robustness of the energy storage and conversion devices. These devices are highly efficient and convenient for smart, light-weight, foldable electronics and modern pollution-free transportation in the current decade.

Review on 2D and 3D MRI Image Segmentation Techniques

BACKGROUND

Magnetic Resonance Imaging is most widely used for early diagnosis of abnormalities in human organs. Due to the technical advancement in digital image processing, automatic computer aided medical image segmentation has been widely used in medical diagnostics.

DISCUSSION

Image segmentation is an image processing technique which is used for extracting image features, searching and mining the medical image records for better and accurate medical diagnostics. Commonly used segmentation techniques are threshold based image segmentation, clustering based image segmentation, edge based image segmentation, region based image segmentation, atlas based image segmentation, and artificial neural network based image segmentation.

CONCLUSION

This survey aims at providing an insight about different 2-Dimensional and 3- Dimensional MRI image segmentation techniques and to facilitate better understanding to the people who are new in this field. This comparative study summarizes the benefits and limitations of various segmentation techniques.

Identification of anuran species diversity of the Panna Tiger Reserve, Central India, using an integrated approach

We present a comprehensive inventory of amphibians from Panna Tiger Reserve in Madhya Pradesh based on morphological, molecular and bioacoustic data. Representatives of 15 anuran species were collected, corresponding to roughly four fifths of the known amphibian species of Madhya Pradesh. The main results of this study are: (1) Description of advertisement calls of eleven species, including the first-time description of advertisement calls of Sphaerotheca pashchima. (2) Identification of cryptic species using acoustic and molecular techniques. (3) Five new significant range extensions and new state records. (4) Description of geographical variation in call properties in three anuran species. This study also provides morphological descriptions with ecological and natural history notes for each species that may be useful in management planning for amphibian conservation in Panna Tiger Reserve.

Effect of 1-Hexyl-3-Methylimidazolium Iodide Ionic Liquid on Ionic Conductivity and Energy Conversion Efficiency of Solid Polymer Electrolyte-Based Nano-Crystalline Dye-Sensitized Solar Cells

Solid polymer electrolytes (SPEs) were prepared using rice starch as the polymer, sodium iodide (NaI) as the salt and 1-hexyl-3-methylimidazolium iodide (HMII) as the ionic liquid (IL). The solution casting technique was used for preparation of the PEs. The ionic conductivity and temperaturedependent properties of the PEs were measured and all the SPEs were found to follow the Arrhenius thermal activated model. Ionic conductivity increased as the percentage of ILs increased. The SPE containing 20% (wt) of HMII IL showed the highest ionic conductivity of 1.83×10^-3 S/cm. Spectral and structural characterization of the PEs were performed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), respectively. The results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) indicate that the decomposition temperature (T_dc), glass transition temperatures (T_g) and melting points (T_m) shifted when complexation with HMII occurred. The PEs were used to fabricate dye-sensitized solar cells (DSSCs) and the DSSCs were analyzed under a 1-sun simulator. The SPE with the highest ionic conductivity displayed a short circuit current density (J_sc) of 9.07 (mA cm^-2), open circuit voltage (V_oc) of 0.58 (V), a fill factor (FF) of 0.65 and had the highest energy conversion efficiency of 3.42%.

Comprehensive Study on Tropical (10°N-15°N) Mesospheric Inversion Layers Using Lidar and Satellite (Timed-Saber) Observations

One of the interesting and poorly understood features of mesosphere and lower thermosphere (MLT) region is the phenomenon of Mesospheric Inversion Layers (MILs). The poor understanding of MILs is due to limited access of their occurrence height region, however the lidars are more efficient tools which provide stratosphere and mesosphere nocturnal temperatures with high temporal and vertical resolutions. The state-of-the-art lidar system comprising Mie, Rayleigh lidars installed at National Atmospheric Research Laboratory (NARL), Gadanki (13.5°N, 79.2°E), India has provided an excellent opportunity to undertake this study. The Nd:YAG laser source with lower power (11W) has been replaced by the one with higher power (30W) in January 2007. As the laser power has been increased, the molecular back scatter signal is also increased and consequently the top height level of the temperature retrieval has been increased to ~90-95 km. In the present study, the role of dominant causative mechanisms for the occurrence of MILs has been discussed using mainly the lidar and satellite (TIMED-SABER) observations over Gadanki region.

Women’s Labour and Sustainable Agriculture

This article looks at the participation of women in irrigated agriculture in 32 districts of Tamil Nadu and found exceptional involvement in these three districts, which are topographically different from each other, namely Kanyakumari, Nilgiris and South Arcot. The study asked—how does contemporary agriculture support female participation and in turn how does this keep agricultural labour supply and food security sustainable? A range of research methods were used to explore the rationale for exceptional female participation in irrigated agriculture. It concluded that such participation arises because of the existing pattern of labour supply primarily by landowning farm women and labourers. This as a result of male preference for widespread skilled jobs, subsequent changing labour pattern due to male migration, matrilineal property ownership, cropping intensity, multi-tasking of women and the coordinated effort of women’s groups (SHGs) in accessing micro-credits. Finally, subsidies and incentives have further altered and effected greater labour supply of women in agriculture.

Measurement of the Electrical Properties of a Thundercloud Through Muon Imaging by the GRAPES-3 Experiment

The GRAPES-3 muon telescope located in Ooty, India records rapid (∼10  min) variations in the muon intensity during major thunderstorms. Out of a total of 184 thunderstorms recorded during the interval of April 2011-December 2014, the one on December 1, 2014 produced a massive potential of 1.3 GV. The electric field measured by four well-separated (up to 6 km) monitors on the ground was used to help estimate some of the properties of this thundercloud, including its altitude and area that were found to be 11.4 km above mean sea level and ≥380  km^{2}, respectively. A charging time of 6 min to reach 1.3 GV implied the delivery of a power of ≥2  GW by this thundercloud that was moving at a speed of ∼60  km h^{-1}. This work possibly provides the first direct evidence for the generation of gigavolt potentials in thunderclouds that could also possibly explain the production of highest-energy (100 MeV) gamma rays in the terrestrial gamma-ray flashes.

Organic Zn and Cu interaction impact on sexual behaviour, semen characteristics, hormones and spermatozoal gene expression in bucks (Capra hircus)

The reproductive performance during the transition from prepubertal to pubertal stage was evaluated in Osmanabadi breed bucks supplemented with organic Zinc (Zn) and Copper (Cu). A total number of 40 bucks aged 20 weeks were randomly assigned to 10 groups (each n = 4). The control group was maintained with basal diet, without any additional mineral supplementation. The treatment groups were supplemented with graded doses of organic Zn (Zn 20 mg, Zn 40 mg and Zn 60 mg), Cu (Cu 12.5 mg, Cu 25 mg and Cu 37.5 mg) and a combination of Zn + Cu (Zn 20 mg + Cu 12.5 mg, Zn 40 mg + Cu 25 mg and Zn 60 mg + Cu 37.5 mg), respectively for a period of 26 weeks (up to the age of 46 weeks). Sexual behaviour and scrotal biometry were recorded periodically. Blood and semen samples were collected and processed for LH estimation in blood plasma, and testosterone, T3 and T4 hormones in the seminal plasma. The mounts with ejaculation were observed earlier (P < 0.05) in the treatment bucks (from 38th week of age) than the control group (43rd week onwards). A positive correlation was observed between blood plasma LH and testosterone with total mounts (r = 0.31, P < 0.05; r = 0.51, P < 0.01) and mounts without ejaculation (r = 0.40, P < 0.01; r = 0.52, P < 0.01). A negative correlation between T4 with sperm number per ejaculation (r = -0.31, P < 0.05) and sperm concentration (r = -0.35, P < 0.05) had been noticed. Different doses of minerals showed positive interaction (P < 0.05) with sperm functional and behavioural characteristics. The spermatozoal gene expression of ODF2 and ZCCHC6 were significantly influenced by the mineral supplementation in all doses. The ZCCHC6 gene expression was positively correlated with testosterone (r = 0.50, P < 0.001) and sperm number per ejaculation (r = 0.42, P < 0.001), and ODF2 gene with T3 hormone (r = 0.34, P < 0.05). The present study indicates that the diet supplemented with organic trace minerals cause intense sexual behaviour, enhancement in sperm number per ejaculate, total motility, spermatozoal genes expression and altered LH, testosterone and T4 hormones.

Density functional theory simulation of cobalt oxide aggregation and facile synthesis of a cobalt oxide, gold and multiwalled carbon nanotube based ternary composite for a high performance supercapattery

A novel ternary composite consisting of cobalt oxide (Co₃O₄) nanoparticles (NPs) grown on multiwalled carbon nanotubes (MWCNTs) and mixed with gold (Au) NPs is synthesized by a single step hydrothermal route.

Biomechanical study of magnetohydrodynamic Prandtl nanofluid in a physiological vessel with thermal radiation and chemical reaction

This article is intended to study the peristaltic motion of a Prandtl nanoliquid through an inclined tapered asymmetric channel. The simultaneous effects such as magnetic field, thermal radiation and chemical reactions have been considered. The geometrical model is considered as tapered asymmetric channel because this situation is observed in the flow of uterine fluid in the uterus. The equations governing the flow are simplified under the assumptions of long wavelength and low Reynolds number. The simplified equations are complex in nature, so that the numerical solutions are presented for the simplified nonlinear partial differential equations considering slip and convective boundary conditions using computational software Mathematica via shooting method. The sundry parameters on the flow quantities have been discussed in detail through graphical and tabular forms. The observed results show that rise in the magnetic effects leads to a reduction in velocity. The radiation parameter decreases the temperature and there is an increment in the pressure gradient with an increase in energy Grashof number. This study is encouraged by exploring the nanofluid dynamics in peristaltic transport as symbolized by heat transport in biological flows, novel pharmacodynamic pumps and gastrointestinal motility enhancement.

Numerical simulation of heat transfer in blood flow altered by electroosmosis through tapered micro-vessels

A numerical simulation is presented to study the heat and flow characteristics of blood flow altered by electroosmosis through the tapered micro-vessels. Blood is assumed as non-Newtonian (micropolar) nanofluids. The flow regime is considered as asymmetric diverging (tapered) microchannel for more realistic micro-vessels which is produced by choosing the peristaltic wave train on the walls to have different amplitudes and phase. The Rosseland approximation is employed to model the radiation heat transfer and temperatures of the walls are presumed constants. The mathematical formulation of the present problem is simplified under the long-wavelength, low-Reynolds number and Debye-Hückel linearization approximations. The influence of various dominant physical parameters are discussed for axial velocity, microrotation distribution, thermal temperature distribution and nanoparticle volume fraction field. However, our foremost emphasis is to determine the effects of thermal radiation and coupling number on the axial velocity and microrotation distribution beneath electroosmotic environment. This analysis places a significant observation on the thermal radiation and coupling number which plays an influential role in hearten fluid velocity. This study is encouraged by exploring the nanofluid-dynamics in peristaltic transport as symbolized by heat transport in biological flows and also in novel pharmacodynamics pumps and gastro-intestinal motility enhancement.

Factors affecting high-density lipoprotein cholesterol in HIV-infected patients on nevirapine-based antiretroviral therapy

Background & objectives:

Cardiovascular disease (CVD) risk with low high-density lipoprotein cholesterol (HDL-C) and high triglycerides is common in the general population in India. As nevirapine (NVP)-based antiretroviral therapy (ART) tends to increase HDL-C, gene polymorphisms associated with HDL-C metabolism in HIV-infected adults on stable NVP-based ART were studied.

Methods:

A cross-sectional study was conducted between January 2013 and July 2014 among adults receiving NVP-based ART for 12-15 months. Blood lipids were estimated and gene polymorphisms in apolipoprotein C3 (APOC3), cholesteryl ester transfer protein (CETP) and lipoprotein lipase (LPL) genes were analyzed by real-time polymerase chain reaction. Framingham's 10-yr CVD risk score was estimated. Logistic regression was done to show factors related to low HDL-C levels.

Results:

Of the 300 patients included (mean age: 38.6±8.7 yr; mean CD4 count 449±210 cell/μl), total cholesterol (TC) >200 mg/dl was observed in 116 (39%) patients. Thirty nine per cent males and 47 per cent females had HDL-C levels below normal while 32 per cent males and 37 per cent females had TC/HDL ratio of 4.5 and 4.0, respectively. Body mass index [adjusted odds ratio (aOR)=1.70, 95% confidence interval (CI) 1.01-2.84, P=0.04] and viral load (aOR=3.39, 95% CI: 1.52-7.52, P=0.003) were negatively associated with serum HDL-C levels. The 10-yr risk score of developing CVD was 11-20 per cent in 3 per cent patients. Allelic variants of APOC3 showed a trend towards low HDL-C.

Interpretation & conclusions:

High-risk lipid profiles for atherosclerosis and cardiovascular disease were common among HIV-infected individuals, even after 12 months of NVP-based ART. Targeted interventions to address these factors should be recommended in the national ART programmes.

N-acetyltransferase gene polymorphisms & plasma isoniazid concentrations in patients with tuberculosis

Background & objectives:

Variations in the N-acetyltransferase (NAT2) gene among different populations could affect the metabolism and disposition of isoniazid (INH). This study was performed to genotype NAT2 gene polymorphisms in tuberculosis (TB) patients from Chennai, India, and compare plasma INH concentrations among the different genotypes.

Methods:

Adult patients with TB treated in the Revised National TB Control Programme (RNTCP) in Chennai, Tamil Nadu, were genotyped for NAT2 gene polymorphism, and two-hour post-dosing INH concentrations were compared between the different genotypes. Plasma INH was determined by high-performance liquid chromatography. Genotyping of the NAT2 gene polymorphism was performed by real-time polymerase chain reaction method.

Results:

Among the 326 patients genotyped, there were 189 (58%), 114 (35%) and 23 (7%) slow, intermediate and fast acetylators, respectively. The median two-hour INH concentrations in slow, intermediate and fast acetylators were 10.2, 8.1 and 4.1 μg/ml, respectively. The differences in INH concentrations among the three genotypes were significant (P<0.001).

Interpretation & conclusions:

Genotyping of TB patients from south India for NAT2 gene polymorphism revealed that 58 per cent of the study population comprised slow acetylators. Two-hour INH concentrations differed significantly among the three genotypes.

Pharmacokinetics of thrice-weekly rifampicin, isoniazid and pyrazinamide in adult tuberculosis patients in India

OBJECTIVE

To study the pharmacokinetics of rifampicin (RMP), isoniazid (INH) and pyrazinamide (PZA) in adult tuberculosis (TB) patients and examine factors that influence drug pharmacokinetics.

METHODS

Adult TB patients (n = 101) receiving thrice-weekly anti-tuberculosis treatment in the Revised National TB Control Programme (RNTCP) were studied. The study was conducted at steady state after directly observed drug administration. RMP, INH and PZA concentrations were estimated using high-performance liquid chromatography and NAT2 genotyping by real-time polymerase chain reaction.

RESULTS

RMP peak concentration (Cmax) was sub-therapeutic (<8 μg/ml) in 88% of the patients. The Cmax of RMP, INH and PZA at 2 h was observed in respectively 83.2%, 97.0% and 92.1% of the patients. The Cmax and area under the curve from 0 to 8 h (AUC0-8) of PZA was lower in TB patients with diabetes mellitus than in non-diabetics. Significant associations were observed between the Cmax and the AUC0-8 of RMP, INH and PZA with drug doses; RMP with category of treatment; INH with smoking, body mass index and N-acetyl transferase 2 genotype; and PZA with sex and smoking.

CONCLUSIONS

Several risk factors for drug concentration variations were identified. Two-hour post-dosing drug concentrations mimicked Cmax. A high proportion of TB patients had RMP Cmax below the expected range, which is a matter of concern.

Outcomes of Ulnar Shortening for Ulnar Impaction Syndrome Using the 2.7 mm AO Ulna Shortening Osteotomy System

Background: Ulnar shortening osteotomy is a well-established treatment for ulnar impaction syndrome. Controversy remains regarding the most effective system to achieve efficient bony union, whilst minimising incidence of complications, particularly hardware irritation. We present outcomes at 2 years using the recently released low profile AO osteotomy system.

Methods: 32 consecutive patients with significant pain from ulnar impaction syndrome (idiopathic or post-traumatic), without degenerative changes of the distal radio-ulnar joint, were included. Time to union, range of motion, grip strength, pain and complications were recorded.

Results: Median time to union was 10.14 weeks (9.27–11.01, 95%CI), with one nonunion. Visual Analogue Pain score, grip strength and range of motion improved significantly. No patient experienced hardware irritation. No plate required removal. Positive ulnar variance was reduced by 3.8 mm (mean).

Conclusions: The low profile AO system appears effective in achieving bony union whilst minimising incidence of hardware irritation, at a follow up of 2 years