Investigation of an individual with background levels of exhaled isoprene: a case study

Isoprene is one of the most abundant and most frequently evaluated volatile organic compounds in exhaled breath. Recently, several individuals with background levels of exhaled isoprene have been identified. Here, case study data are provided for an individual, identified from a previous study, with this low prevalence phenotype. It is hypothesized that the individual will illustrate low levels of exhaled isoprene at rest and during exercise. At rest, the subject (7.1 ppb) shows background (μ= 14.2 ± 7.0 ppb) levels of exhaled isoprene while the control group illustrates significantly higher quantities (μ= 266.2 ± 72.3 ppb) via proton transfer reaction mass spectrometry (PTR-MS). The result, background levels of isoprene at rest, is verified by thermal desorption gas chromatography mass spectrometry (TD-GC-MS) collections with the individual showing -3.6 ppb exhaled isoprene while the room background containedμ= -4.1 ± 0.1 ppb isoprene. As isoprene has been shown previously to increase at the initiation of exercise, exercise bike experiments were performed with the individual identified with low isoprene, yielding low and invariant levels of exhaled isoprene (μ= 6.6 ± 0.1 ppb) during the exercise while control subjects illustrated an approximate 2.5-fold increase (preμ= 286.3 ± 43.8 ppb, exerciseμ= 573.0 ± 147.8 ppb) in exhaled isoprene upon exercise start. Additionally, exhaled breath bag data showed a significant decrease in isoprene (delta post/pre, p = 0.0078) of the control group following the exercise regimen. Finally, TD-GC-MS results for exhaled isoprene from the individual's family (mother, father, sister and maternal grandmother) illustrated that the mother and father exhibited isoprene values (28.5 ppb, 77.2 ppb) below control samples 95% confidence interval (μ= 166.8 ± 43.3 ppb) while the individual's sister (182.0 ppb) was within the control range. These data provide evidence for a large dynamic range in exhaled isoprene in this family. Collectively, these results provide additional data surrounding the existence of a small population of individuals with background levels of exhaled isoprene.

The Impact of Nutritional Supplementation on Sweat Metabolomic Content: A Proof-of-Concept Study

Sweat is emerging as a prominent biosource for real-time human performance monitoring applications. Although promising, sources of variability must be identified to truly utilize sweat for biomarker applications. In this proof-of-concept study, a targeted metabolomics method was applied to sweat collected from the forearms of participants in a 12-week exercise program who ingested either low or high nutritional supplementation twice daily. The data establish the use of dried powder mass as a method for metabolomic data normalization from sweat samples. Additionally, the results support the hypothesis that ingestion of regular nutritional supplementation semi-quantitatively impact the sweat metabolome. For example, a receiver operating characteristic (ROC) curve of relative normalized metabolite quantities show an area under the curve of 0.82 suggesting the sweat metabolome can moderately predict if an individual is taking nutritional supplementation. Finally, a significant correlation between physical performance and the sweat metabolome are established. For instance, the data illustrate that by utilizing multiple linear regression modeling approaches, sweat metabolite quantities can predict VO₂ max (p = 0.0346), peak lower body Windage (p = 0.0112), and abdominal circumference (p = 0.0425). The results illustrate the need to account for dietary nutrition in biomarker discovery applications involving sweat as a biosource.

Rate normalization for sweat metabolomics biomarker discovery

As the demand for real-time exercise performance feedback increases, excreted sweat has become a biosource of interest for continuous human performance assessment. For sweat to truly fulfill this requirement, analyte concentrations must be normalized to adequately assess day-to-day differences within and among individuals. In this manuscript, data are presented highlighting the use of accurate localized sweat rate as a means for ion and global metabolomic data normalization. The results illustrate large sweat rate variability among individuals over the course of two distinct exercises protocols. Furthermore, the data show sweat rate is not symmetrical at similar locations among right and left forearms of individuals (p = 0.0007). Sweat ion conductivity analysis suggest overall sweat rate normalization reduces variability collectively among ion values and participants with principal component analysis showing 77.8% of variation in the data set attributable to sweat rate normalization. Global metabolomic analysis of sweat illustrated overall rate normalization increases the variability among test subjects with 72.7% of the variation explained by sweat rate normalization. Finally, overall rate normalized metabolomic features of sweat significantly correlated (ρ ≥ 0.7, ρ ≤ -0.7) with measured performance metrics of the individual, establishing the potential for sweat to be used as a biosource for performance monitoring. Collectively, these data illustrate the importance of accurate localized sweat rate determination, for analyte data normalization, in support for the use of sweat in biomarker discovery efforts to predict human performance.

Evaluation of a standardized collection device for exhaled breath sampling onto thermal desorption tubes

The Respiration Collector for In Vitro Analysis (ReCIVA) sampler, marketed by Owlstone Medical, provides a step forward in exhaled breath sampling through active sampling directly onto thermal desorption (TD) tubes. Although an improvement to the issues surrounding breath bag sampling, the ReCIVA device, first released in 2015, is a relatively new research and clinical tool that requires further exploration. Here, data are presented comparing two distinct ReCIVA devices. The results, comparing ReCIVA serial numbers #33 and #65, demonstrate that overall statistically insignificant results are obtained via targeted isoprene quantitation (p > 0.05). However, when the data are parsed by the TD tube type used to capture breath volatiles, either Tenax TA or the dual bed Tenax/Carbograph 5TD (5TD), a statistical difference (p < 0.05) among the two different TD tubes was present. These data, comparing the two ReCIVA devices with both Tenax TA and 5TD tubes, are further supported by a global metabolomics analysis yielding 85% of z-scores, comparing ReCIVA devices, below the limit for significance. Experiments to determine the effect of breathing rate on ReCIVA function, using guided breathing for low (7.5 breaths min^-1) and high (15 breaths min^-1) breathing rates, demonstrate the ReCIVA device shows no statistical difference among breathing rates for quantitated isoprene (p > 0.05). Global metabolomics analysis of the guided breathing rate data shows more than 87% of the z-scores, comparing high and low breathing rates using both the Tenax and the 5TD tubes, are below the level for significance. Finally, data are provided from a single participant who displayed background levels of isoprene while illustrating levels of acetone consistent with the remaining participants. Collectively, these data support the use of multiple ReCIVA devices for exhaled breath collection and provide evidence for an instance where exhaled isoprene is consistent with background levels.

Characterization of standardized breath sampling for off-line field use

Due to several sources of potential variability associated with exhaled breath bag sampling procedures for off-line analysis, the Respiration Collector for in vitro Analysis (ReCIVA) sampler was developed. Although designed to improve upon several pitfalls of sampling with exhaled breath bags, the ReCIVA remains a minimally studied research tool. In this manuscript, several attributes of the ReCIVA sampler are investigated among three individual tests, such as background contamination, control software version, performance of different adsorbent tubes, duplicate sample production, and comparison to exhaled breath bags. The data shows greater than a 58% reduction in background siloxanes can be achieved with submersion of ReCIVA masks in ethyl alcohol or baking the masks at a high temperature (200 °C). The results illustrate the ReCIVA control software version plays a key role in the flow rates applied to thermal desorption (TD) tubes. Using exhaled isoprene as a representative analyte, the data suggest duplicate samples among ReCIVA pump banks can be achieved using two different thermal desorption tubes, Tenax TA and Tenax/Carbograph 5TD, when using an updated control software and manually calibrating the ReCIVA pumps to uniform flow rates (Tenax p = 0.3869, 5TD p = 0.3131). Additionally, using the updated control software and manual ReCIVA flow calibration, the data suggest the ReCIVA can produce statistically similar results among TD tube types (p = 0.3824) and compared to standard exhaled breath bags (p = 0.1534). Collectively, these results establish a method for manually calibrating the flow of the ReCIVA device to allow for the most consistent results. These data support further experimentation into the use of the ReCIVA sampler for exhaled breath research.

Street fentanyl use: Experiences, preferences, and concordance between self-reports and urine toxicology

BACKGROUND

Conducted in Dayton, Ohio, the study aims to characterize user knowledge and experiences with non-pharmaceutical fentanyl-type drugs (NPFs) and compare self-reports with urine toxicology for NPFs and heroin.

METHODS

Between May 2017-January 2018, 60 individuals who self-reported heroin/NPF use were interviewed using structured questionnaire on socio-demographics, NPF and other drug use practices. Unobserved urine samples were collected and analyzed using: 1) liquid-chromatography-tandem mass spectrometry (LC-MS/MS)-based method (Toxicology lab) to identify 34 fentanyl analogues, metabolites, and other synthetic opioids; 2) immunoassay-based method to screen for opiates (heroin). Sensitivity, specificity and Cohen's kappa were calculated to assess agreement between self-reports and urine toxicology.

RESULTS

The sample was 52% female, and over 90% white. Almost 60% reported preference for heroin, and 40% for NPF. Participants endorsed a number of ways of distinguishing heroin from NPF, including appearance (88.3%), effects (76.7%), taste (55%), and information provided by dealers (53.3%). Almost 80% felt confident they could distinguish heroin from NPF, but knowledge about fentanyl analogues was limited. LC-MS/MS testing identified 8 types of NPFs. Over 88% tested positive for NPFs, including 86% fentanyl, 48% carfentanil, 42% acetyl fentanyl. About 47% screened positive for opiates/heroin, and all of them were also positive for NPFs. When comparing self-reported use of NPF to urine toxicology, sensitivity and specificity were relatively high (84% and 83.3%, accordingly), while Cohen's Kappa was 0.445, indicating fair agreement. Sensitivity and specificity were lower for heroin (77.8% and 50.0%, accordingly), and Cohen's Kappa was 0.296, indicating low agreement between self-reports of heroin use and urine toxicology.

DISCUSSION

Nearly 90% of the study participants tested positive for NPF-type drugs. Participants were more likely to over-report heroin use and underreport NPF use. The majority had little knowledge about fentanyl analogues. Study findings will inform development of novel harm reduction approaches to reduce overdose mortality.

Trends in fentanyl and fentanyl analogue-related overdose deaths - Montgomery County, Ohio, 2015-2017

INTRODUCTION

There is a lack of information on illicitly manufactured fentanyl and fentanyl analogue-related (IMF) unintentional overdose death trends over time. The study analyzes IMF-related unintentional overdose fatalities that occurred between July 2015 and June 2017 in Montgomery County, Ohio, an area with the highest rates of unintentional overdose mortality in Ohio.

METHODS

LC-MS/MS-based method was used to identify fentanyl analogs and metabolites in 724 unintentional overdose death cases. The Chi-square statistic was used to assess differences over time in demographic and drug-related characteristics.

RESULTS

The number of unintentional overdose death cases testing positive for IMFs increased by 377% between second half of 2015 and first half of 2017. The majority of decedents were white (82.5%) and male (67.8%). The proportion of fentanyl-only (no other analogs) cases declined from 89.2%-24.6% (p < 0.001), while proportion of fentanyl analogue-containing cases increased from 9.8%-70.3% (p < 0.001) between the second half of 2015 and first half of 2017. The most commonly identified fentanyl analogs were carfentanil (29.7%), furanyl fentanyl (14.1%) and acryl fentanyl (10.2%). Proportion of IMF cases also testing positive for heroin declined from 21.6% to 5.4% (p < 0.001), while methamphetamine positive cases increased from 1.4%-17.8% (p < 0.001) over the same time period.

DISCUSSION

Emergence of fentanyl analogs contributed to substantial increases in unintentional overdose deaths. The data indicate a growing overlap between the IMF and methamphetamine outbreaks. Continuous monitoring of local IMF trends and rapid information dissemination to active users are needed to reduce the risks associated with IMF use.