Determination of Total Dietary Fiber (CODEX Definition) by Enzymatic-Gravimetric Method and Liquid Chromatography: Collaborative Study

A method for the determination of total dietary fiber (TDF), as defined by the CODEX Alimentarius, was validated in foods. Based upon the principles of AOAC Official MethodsSM 985.29, 991.43, 2001.03, and 2002.02, the method quantitates high- and low-molecular-weight dietary fiber (HMWDF and LMWDF, respectively). In 2007, McCleary described a method of extended enzymatic digestion at 37C to simulate human intestinal digestion followed by gravimetric isolation and quantitation of HMWDF and the use of LC to quantitate low-molecular-weight soluble dietary fiber (LMWSDF). The method thus quantitates the complete range of dietary fiber components from resistant starch (by utilizing the digestion conditions of AOAC Method 2002.02) to digestion resistant oligosaccharides (by incorporating the deionization and LC procedures of AOAC Method 2001.03). The method was evaluated through an AOAC collaborative study. Eighteen laboratories participated with 16 laboratories returning valid assay data for 16 test portions (eight blind duplicates) consisting of samples with a range of traditional dietary fiber, resistant starch, and nondigestible oligosaccharides. The dietary fiber content of the eight test pairs ranged from 11.57 to 47.83. Digestion of samples under the conditions of AOAC Method 2002.02 followed by the isolation and gravimetric procedures of AOAC Methods 985.29 and 991.43 results in quantitation of HMWDF. The filtrate from the quantitation of HMWDF is concentrated, deionized, concentrated again, and analyzed by LC to determine the LMWSDF, i.e., all nondigestible oligosaccharides of degree of polymerization 3. TDF is calculated as the sum of HMWDF and LMWSDF. Repeatability standard deviations (sr) ranged from 0.41 to 1.43, and reproducibility standard deviations (sR) ranged from 1.18 to 5.44. These results are comparable to other official dietary fiber methods, and the method is recommended for adoption as Official First Action.

Effect of Moisture Content and Screw Speed on the Physical Chemical Properties of an Extruded Crab-based Snack

Crab processing generates by-products that could be used in new value-added products to decrease processing waste and increase profits. In this product development study, the effects of moisture content and screw speed on physical properties and composition of an extruded crab-based snack product were investigated. Corn meal was fortified with 10% ground crab leg and passed through a twin-screw extruder using moisture contents of 25% and 30% and screw speeds of 200, 250 and 300rpm for a total of six treatments, extruded in duplicate. Screw speed and moisture content had a significant (p 0.05) influence on moisture content, expansion ratio, crunchiness and L-value of the extrudate while protein, fat, ash and mineral were not significantly (p 0.05) affected. As screw speed increased, moisture content and bulk density of the extrudates decreased. The snack product extruded at 25% moisture content and 300rpm had significantly different (p 0.05) physical properties compared to all other treatments. Increases in torque and melting temperature were observed for higher screw speed and lower extruding moisture content.

Sulfur compounds reduce potato toxins during extrusion cooking

Free sulfhydryl groups in sulfur compounds have been reported to act directly on natural toxins to reduce toxicity. The objective of this study was to reduce protease inhibitors and glycoalkaloids in simulated snack foods by the addition of sulfur-containing compounds prior to extrusion. Thiamine, methionine, and benzyl disulfide were added to potato flakes at levels of 0.5% or 1.0% prior to twin-screw extrusion. Total and free thiols and protease inhibitors were monitored before and after extrusion by colorimetric assays. Potato glycoalkaloids were analyzed by HPLC and by immunoassay. Extrusion reduced potato flake disulfide bonds; disulfide bonds were higher in samples containing added sulfur compounds. Trypsin inhibitor activity was reduced by as much as 79% by extrusion plus methionine. Extrusion significantly reduced carboxypeptidase inhibitor, but only when benzyl disulfide and 0.5% methionine were not added. One percent methionine and thiamine resulted in 60% reductions in glycoalkaloids.

Transient inhibition of responses to thermal stimuli of spinal sensory tract neurons in monkeys during sensitization by intradermal capsaicin

A secondary zone of cutaneous hyperalgesia in humans is characterized by increased pain to mechanical stimuli. In contrast, the perception of heat stimuli delivered to a secondary zone of hyperalgesia in humans often shows a paradoxical decrease in magnitude. A number of studies have shown that the responses of spinal cord neurons to cutaneous mechanical stimuli after peripheral injury model well the mechanical hyperalgesia. However, the responses of dorsal horn neurons to thermal stimuli after peripheral injury have not been as carefully studied. The present study examined the effects of intradermal capsaicin on the responses of spinal sensory projection neurons to cutaneous mechanical and thermal stimuli. Our observations indicate that the responses of identified sensory projection neurons to heat are transiently reduced at the same time that responses of these cells to mechanical stimuli are increased. These results confirm a role for sensory projection cells in signaling the sensory discriminative aspects of pain in humans and underscore the emerging complexity of dorsal horn circuitry and sensory processing.