Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders

BACKGROUND

Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three‑dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD.

METHODS

This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses.

RESULTS

For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too.

CONCLUSIONS

SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

Three-dimensional phenotype characteristics of skeletal class III malocclusion in adult Chinese: a principal component analysis-based cluster analysis

BACKGROUND

Skeletal class III malocclusion has a diverse and complicated aetiology involving environmental and genetic factors. It is critical to correctly classify and define this malocclusion to be diagnosed and treated on a clinically sound basis. Thus, this study aimed to provide reliable and detailed measurements in a large ethnically homogeneous sample of Chinese adults to generate an adequate phenotypic clustering model to identify and describe the skeletal variation present in skeletal class III malocclusion.

MATERIALS AND METHODS

This is a retrospective cross-sectional study in which 500 pre-treatments cone-beam computed tomography (CBCT) scans of patients with skeletal class III malocclusion (250 males and 250 females) were selected following specific selection criteria. Seventy-six linear, angular, and ratios measurements were three-dimensionally analysed using InVivo 6.0.3 software. These measurements were categorised into 47 skeletal, 18 dentoalveolar, and 11 soft tissue variables. Multivariate reduction methods: principal component analyses and cluster analyses were used to present the most common phenotypic groupings of skeletal class III malocclusion in Han ethnic group of Chinese adults.

RESULTS

The principal component analysis revealed eight principal components accounted for 72.9% of the overall variation of the data produced from the seventy-six variables. The first four principal components accounted for 53.37% of the total variations. They explained the most variation in data and consisted mainly of anteroposterior and vertical skeletal relationships. The cluster analysis identified four phenotypes of skeletal class III malocclusion: C1, 34%; C2, 11.4%; C3, 26.4%; and C4, 28.2%.

CONCLUSION

Based on three-dimensional analyses, four skeletal class III malocclusion distinct phenotypic variations were defined in a large sample of the adult Chinese population, showing the occurrence of phenotypic variation between identified clusters in the same ethnic group. These findings might serve as a foundation for accurate diagnosis and treatment planning of each cluster and future genetic studies to determine the causative gene(s) of each cluster.

Alveolar bone changes following bi-maxillary vertical molars' movements using clear aligners

OBJECTIVE

This study aimed to assess the alveolar bone changes following maxillary and mandibular molars' intrusion and extrusion movements using Clear Aligners using Cone-Beam Computed Tomography (CBCT).

MATERIALS AND METHODS

This is a retrospective clinical study in which 24 adult patients with pre-designed selection criteria and a mean age of 31.1 + 9.9 years were enrolled. The alveolar bone changes around one hundred thirty-three maxillary and mandibular molars intruded or extruded by Clear Aligners therapy were analyzed from CBCT using Invivo 6.0 software. Intra- and inter-examiner reliability analysis was performed using the intra-class correlation coefficient (ICC) and Cronbach's Alpha statistics. The paired t-test was used to analyze significant differences before and after treatment (T0-T1). The significance level was considered at P < 0.05.

RESULT

The patients were divided into two groups: extrusion (48.9%, n = 65 molars' root) and intrusion (51.1%, n = 68 molars' root) group. There was a significant decrease in the alveolar bone changes in the buccal surface of the mandibular right and left 1st molars in the extrusion group (-1.05 ± 0.97, -0.76 ± 1.12 mm, respectively) and the maxillary left 2nd molars in intrusion group (-0.42 ± 0.77 mm), and the lingual surface of intrusion of the mandibular left 1st molar (-0.64 ± 0.76 mm). Comparing the mean maxillary and mandibular changes (T0-T1) of both studied groups showed that the buccal alveolar bone changes for the left 1st and right 2nd molars showed a significant difference in extrusion and intrusion groups, respectively.

CONCLUSIONS

The buccal alveolar bone changes is considered the most affected surface following maxillary and mandibular molars' intrusion and extrusion movements using clear aligners, with mandibular molars being more affected than the maxillary ones.

Three-dimensional assessment of the favorability of maxillary posterior teeth intrusion in different skeletal classes limited by the vertical relationship with the maxillary sinus floor

Background

Understanding the anatomical relationship between the maxillary sinus floor (MSF) and the posterior maxillary teeth (PMT) is important when planning the orthodontic intrusion of the posterior teeth. This study aimed to determine the vertical relationship between posterior maxillary teeth and maxillary sinus floor in different skeletal classes in the Chinese adult population.

Methods

This is a retrospective cross-sectional study involved cone beam computed tomography images of 298 adult patients (145 males and 153 females) between 20 and 45 years old. The sample was categorized according to A point, Nasion, B point (ANB) angle into 102 Class I, 102 Class II, and 94 Class III malocclusion. Non-parametric Wilcoxon Mann–Whitney U and Kruskal–Wallis tests were used to compare the studied groups. The Intra-class Correlation Coefficient (ICC) was used to assess the intra- and inter-observer reliability analysis.

Results

Overall, there was a statistically significant difference in the mean distance between both genders (P < 0.001). The measured distance increased with age in all posterior tooth roots (P < 0.001). The root apex in the sagittal view appeared to be closer to the maxillary sinus than in the coronal view; 2.2 ± 4.3 and 3.1 ± 5.5 mm, respectively. The most frequent root scores were Type 1 and Type 2P. In both sagittal and coronal views, Class I demonstrated a higher Type 2P prevalence, whereas Class III showed a lower prevalence. The second molars’ mesiobuccal root had the largest number of penetration in the three examined skeletal classes.

Conclusions

Maxillary molars of Class I malocclusion with the majority of Type 2P root-sinus relationship have the highest possible risk of root resorption during molar intrusion due to cortical bone encroachment, while Class III malocclusion showed the least possible risk.

Supplementary information

The online version contains supplementary material available at 10.1186/s13005-022-00316-3.

Three-dimensional craniofacial changes with maxillary expansion in young adult patients with different craniofacial morphology

Objectives:

Skeletally mature patients with transverse deficiency are best treated with surgically assisted rapid palatal expansion (RPE) procedure. Recent studies have shown that microimplant-assisted RPE (MARPE) appliances can be effective in achieving skeletal expansion in young adults. This retrospective study aimed to evaluate the skeletal and dental alveolar changes in response to treatment with MARPE appliances in three types of anteroposterior skeletal malocclusions using cone-beam computed tomography (CBCT) scans.

Material and Methods:

Seventy-eight subjects diagnosed with maxillary transverse deficiency and treated with the MARPE appliance (mean age of 22.9 ± 4.2 years) were divided into skeletal Class I, II, and III malocclusions with 26 subjects in each group. Pre- and post-treatment CBCT scans were used for superimposition to examine the skeletal and dentoalveolar changes following maxillary expansion treatment.

Results:

Significant lateral separation of the maxilla was found at the levels of the nasal floor, interzygomatic bones, and the inferior palatine margin of the alveolar process (P < 0.05) in the whole sample. Most of the sagittal and vertical variables change significantly in the whole sample and each studied group separately. Intergroup comparisons revealed no significant differences among the three skeletal classes except for the left frontozygomatic angle, left maxillary inclination angle, and torque in the first and second premolars. In Class III patients, the maxilla moved forward significantly in most of the cases (eight of 26 cases) (0.88°, P < 0.05) and the mandible moved downward and backward improving the anteroposterior skeletal relationship. Significant differences were also found in the vertical measurements (N-Me, MMP, and MP/SN, P < 0.05) in all three types of anteroposterior malocclusions.

Conclusion:

Maxillary expansion with the MARPE appliance in young adult patients induced different skeletal and dentoalveolar changes in the anteroposterior and vertical dimensions in each skeletal malocclusion with no significant difference among the three skeletal classes.

Proximity of upper central incisors to incisive canal among subjects with maxillary dentoalveolar protrusion in various facial growth patterns

OBJECTIVE

To investigate the position of the upper central incisor roots (U1) relative to the incisive canal (IC) among subjects with maxillary dentoalveolar protrusion in various facial growth patterns.

MATERIALS AND METHODS

240 cone beam computed tomography images of skeletal Class I and II maxillary or bimaxillary protrusive subjects with a mean age of 23.74 ± 3.73 years were enrolled according to their facial growth pattern. The IC volume was measured using Mimics 21 software (Materialise, Leuven, Belgium). The U1 inter-root distance, width of IC, and their proximity were estimated using Invivo6 software (Anatomage, San Jose, CA).

RESULTS

The IC volume was slightly greater among the high angle facial group and female patients than the other groups. Overall, the IC width was greater than the U1 inter-root distance in 55.65%, 57.6%, and 65% among the average, low, and high angle facial groups, respectively, and in 56.5% and 62.9% of males and females, respectively. The overall anteroposterior (sagittal) distances between the U1 roots and IC were 4.36 ± 1.18, 4.78 ± 1.17, and 3.83 ± 0.90 mm among the average, low, and high angle facial groups, respectively.

CONCLUSIONS

The high angle facial group and female patients showed slightly greater IC dimensions than the other groups. The overall maximum sagittal distances between the U1 and IC were around 5.5, 6, and 4.7 mm among the average, low, and high angle facial groups, respectively. The low angle facial group and male patients tended to have greater sagittal distances. Therefore, the present findings could serve as a guideline when a considerable amount of upper incisor retraction is planned for Class I or II maxillary or bimaxillary dentoalveolar protrusion patients.

Three-dimensional assessment of temporomandibular joint in skeletal Class I malocclusion with variable degrees of overbite and overjet

OBJECTIVE

To three-dimensionally evaluate the position and morphology of the TMJ in skeletal Class I with variable degrees of overbite and overjet in comparison with normal peers.

METHODS

Pretreatment CBCT scans of 126 adults were retrieved. Based on the severity of overjet and overbite, the sample was divided into three main groups and six subgroups (18 patients each): the first group with a normal overbite and variable overjet degree and the second group with normal overjet and variable overbite degree. These six subgroups were compared with a third control group of normal overjet and overbite.

RESULTS

There were significant differences in vertical condylar position, vertical and anteroposterior condylar inclinations, condylar height, and significant posterior condylar positioning in severe deep overbite, compared with the control group.

CONCLUSION

There were significant changes in the TMJ components in severe deep overbite cases. Therefore, sever deep overbite could be considered a predisposing factor for temporomandibular disorders.

Accuracy and reproducibility of permanent dentitions and dental arch measurements: comparing three different digital models with a plaster study cast

AIM

The objective of the present study was to assess the accuracy and reproducibility of permanent dentition and dental arch measurements of three digital scanners compared with the gold standard, a physical plaster cast.

MATERIALS AND METHODS

In this cross-sectional study, the following records of 30 patients were used: 1) orthodontic physical plaster study cast (PPSC); 2) digitally scanned physical model (DSPM), 3) direct intraoral model scanned with a Trios color scanner; and 4) direct 3D CBCT digital model. The following 3D measurements were obtained: mesiodistal tooth dimensions; total tooth materials; dental arch perimeters; total arch lengths; and intermolar, interpremolar, and intercanine widths. The measurements on the three digital models were contrasted with those on the PPSC. Differences were tested using a dependent t test for intragroup comparisons. A P value of < 0.05 was considered statistically significant. Intraclass correlation coefficient was used to assess intra- and interexaminer reliability.

RESULTS

Except for the mesiodistal dimensions of the mandibular left central incisors (P < 0.001) and the mandibular intercanine width (P = 0.041), no statistically significant differences were found between the measurements made directly on the PPSC and those on the three digital models. The mean discrepancies between the methods ranged from as low as 0.003 mm to as high as 0.67 mm for the total tooth materials, and as low as 0.01 mm to as high as 0.37 mm for the total arch length. For the transverse dimension, the mean discrepancies ranged from as low as 0.3 mm for the maxillary intercanine width to as high as 0.5 mm for the mandibular intercanine width. However, these significant differences were not considered clinically significant.

CONCLUSIONS

The DSPM, Trios color scanner digital model, and direct 3D CBCT digital model appear to be adequate, reliable, and time-saving alternatives to the PPSC when analyzed using a digital caliper.

Comprehensive evaluation of factors that induce gingival enlargement during orthodontic treatment: A cross-sectional comparative study

Background

Gingival enlargement (GE) is one of the most common soft tissue problems encountered during fixed orthodontic treatment. Aims: This study aimed to evaluate the factors affecting GE in adolescents and young adults, compared with their normal peers.

Subjects and Methods

This is a cross-sectional comparative study. The sample consisted of 329 subjects (ages 10-30 years) of both genders, which was divided into four main groups: The control group (G0) with no orthodontic treatment; subjects who underwent orthodontic treatment were divided according to treatment duration into G1 (4-12 months), G2 (13-24 months), and G3 (>24 months). The clinical examinations included the level of debris, calculus (simplified oral hygiene), and GE indices. Regression analyses were used to assess the GE association in all the studied groups.

Results

The mean GE score increased significantly with increased treatment duration (0.42 ± 0.29 for G0 and 1.03 ± 0.52 for G3). GE scores of the lower arch were significantly higher in the anterior segment than in the posterior segment among all treatment groups. Regression analysis revealed that gender, age, oral hygiene, and treatment duration had a significant effect on GE (P < 0.05), while angle classification, overjet, overbite, treatment stage, bracket type, and therapeutic extraction did not show significant associations (P > 0.05).

Conclusion

Gender, age, oral hygiene, and treatment duration were the most important risk factors for GE during fixed orthodontic treatment.

Three-dimensional assessment of asymmetric mid-palatal suture expansion assisted by a customized microimplant-supported rapid palatal expander in non-growing patients: Uncontrolled Clinical Trial

OBJECTIVES

The objective was to evaluate the magnitude, incidence and possible factors of asymmetric expansion with a customized microimplant-supported rapid palatal expander (MARPE) in non-growing patients.

SETTING AND SAMPLE POPULATION

This retrospective study included a sample of 49 patients (mean age: 23.9 ± 3.9 years) treated with a customized microimplant-supported rapid palatal expander. Based on the symmetry of expansion, the sample was divided into Group S (symmetric expansion group, n = 26) and Group A (asymmetric expansion group, n = 23).

METHODS

Pre- and post-treatment cone-beam computed tomography (CBCT) images were superimposed to assess skeletal change in both studied groups. Seven variables were tested: unilateral crossbite, maxillary base cant, chin deviation, the initial asymmetrical position of the mid-palatal suture, split pattern of frontomaxillary suture, Angle's classification and dental arch crowding. Paired t-test and logistic regression analyses were utilized to evaluate the possible factors behind the asymmetric expansion.

RESULTS

There was a significant difference (P < .01) between the studied groups. The average expansion was 4.26 mm at the anterolateral maxillary walls (BB) and 3.83 mm at the greater palatine foramen region (GPF). The average expansion at the GPF was 90% of that at the BB. The frequency of asymmetric expansion was 46.9%. Among the seven tested variables, the presence of the initial asymmetric position of the mid-palatal suture is the only variable that showed correlation with asymmetric expansion.

CONCLUSION

Initial asymmetric position of the mid-palatal suture is considered a contributing factor of skeletal asymmetric expansion following microimplant-supported rapid palatal expansion in skeletally comparable patients.

Three-dimensional morphological and positional analysis of the temporomandibular joint in adults with posterior crossbite: A cross-sectional comparative study

OBJECTIVES

The purpose of this study was to three-dimensionally (3D) evaluate the morphological and positional features of the temporomandibular joint (TMJ) in adults with unilateral and bilateral posterior crossbite compared with aligned control subjects.

MATERIALS AND METHODS

This cross-sectional comparative study analysed cone beam computed tomography (CBCT) images of 90 adult subjects' divided into three equal groups: bilateral posterior crossbite (BCG), unilateral posterior crossbite (UCG) and control group (CG). 3D measurements of the TMJ included the following: (a) position, angulation and inclination of the mandibular condyles; (b) centralisation of the condyles in their respective mandibular fossae; and (c) volumetric measurements of the TMJ spaces. Intra- and intergroup differences were identified using the paired Student's t test and an analysis of variance (ANOVA) followed by Tukey's post hoc test, respectively.

RESULTS

Regarding the intra-group side-based comparisons, there were significant differences in the anterior and superior joint spaces and the anteroposterior condylar joint position in the UCG. Intergroup comparisons revealed significant differences in the vertical condylar inclination, medial condylar position, condylar width and height, and volumetric joint space between the unaffected side of the UCG and left sides of the other groups. There were significant differences in the anteroposterior condylar inclination, medial condylar position, condylar width and height, anterior, posterior, superior and volumetric joint spaces, and anteroposterior condylar joint position between the crossbite side of the UCG and the right sides of the other groups.

CONCLUSION

Skeletal crossbite accompanied with characteristic morphological and positional TMJ features associated with unilateral posterior crossbite and are associated with side-specific TMJ asymmetry.

Three-dimensional assessment of accelerating orthodontic tooth movement-micro-osteoperforations vs piezocision: A randomized, parallel-group and split-mouth controlled clinical trial

OBJECTIVE

To compare the effects of micro-osteoperforations (MOPs) vs piezocision (Piezo) in accelerating orthodontic tooth movement in adults.

SETTING AND SAMPLE POPULATION

In this randomized, single-blinded, parallel-group, split-mouth clinical trial, 24 patients aged 15-40 years were recruited.

SUBJECTS AND METHODS

Patients were randomly allocated into two groups: MOPs and Piezo groups. One side of the maxilla was allocated randomly for treatment with one of these techniques, and the other side was treated conventionally to act as a split-mouth control. The rate of canine retraction was evaluated up to 3 months by three-dimensional digital models using a conventional labial appliance. Root resorption and bone height were evaluated using cone beam computed tomography.

RESULTS

The MOPs and Piezo groups showed a significantly higher rate of tooth movement after 3 months on the experimental sides than the control sides. However, the net movements in the MOPs and Piezo groups did not reveal a higher rate of tooth movement. Similarly, the overall net movement was -0.32 ± 1.14 and -0.55 ± 0.89 mm for MOPs and Piezo, respectively (P = .606). Regarding root resorption, the overall changes in intra- or intergroup comparisons were insignificant. Decreased canine palatal bone height was reported on the experimental side of the Piezo group (P = .015) after 3 months, but the overall changes were insignificant.

CONCLUSIONS

The effect of MOPs and Piezo techniques in accelerating the orthodontic canine retraction was comparable to each other, and to the conventional methods. Neither technique caused root resorption or increased vertical bone loss.

Global distribution of malocclusion traits: A systematic review

OBJECTIVE

Considering that the available studies on prevalence of malocclusions are local or national-based, this study aimed to pool data to determine the distribution of malocclusion traits worldwide in mixed and permanent dentitions.

METHODS

An electronic search was conducted using PubMed, Embase and Google Scholar search engines, to retrieve data on malocclusion prevalence for both mixed and permanent dentitions, up to December 2016.

RESULTS

Out of 2,977 retrieved studies, 53 were included. In permanent dentition, the global distributions of Class I, Class II, and Class III malocclusion were 74.7% [31 - 97%], 19.56% [2 - 63%] and 5.93% [1 - 20%], respectively. In mixed dentition, the distributions of these malocclusions were 73% [40 - 96%], 23% [2 - 58%] and 4% [0.7 - 13%]. Regarding vertical malocclusions, the observed deep overbite and open bite were 21.98% and 4.93%, respectively. Posterior crossbite affected 9.39% of the sample. Africans showed the highest prevalence of Class I and open bite in permanent dentition (89% and 8%, respectively), and in mixed dentition (93% and 10%, respectively), while Caucasians showed the highest prevalence of Class II in permanent dentition (23%) and mixed dentition (26%). Class III malocclusion in mixed dentition was highly prevalent among Mongoloids.

CONCLUSION

Worldwide, in mixed and permanent dentitions, Angle Class I malocclusion is more prevalent than Class II, specifically among Africans; the least prevalent was Class III, although higher among Mongoloids in mixed dentition. In vertical dimension, open bite was highest among Mongoloids in mixed dentition. Posterior crossbite was more prevalent in permanent dentition in Europe.

Pharyngeal airway spaces in different skeletal malocclusions: a CBCT 3D assessment

Objective: To three-dimensionally evaluate the upper pharyngeal airway spaces in adults with different anteroposterior and vertical skeletal malocclusions.Methods: In this retrospective study, three-dimensional airway volume and the minimum constricted areas of 120 adults were measured from cone beam computed tomography volume scans. The sample was divided into skeletal Class I and Class II and subdivided into average and long face malocclusions in each skeletal Class. Airway volumes of the naso-, palato-, and glossopharynx, and the minimum constricted area were measured and compared.Results: Skeletal Class II reduced glossopharyngeal airway volume and larger total minimum constricted area in average faces and more nasal minimum constricted area in long faces. Skeletal Class II with long face significantly increased palatopharyngeal and glossopharyngeal airway volumes as well as larger palatopharyngeal minimum constricted area (p < 0.05).Conclusion: This paper found a likely association between jaw skeletal classification and airway dimensions.