Superior removal of Co2+, Cu2+ and Zn2+ contaminants from water utilizing spongy Ni/Fe carbonate-fluorapatite; preparation, application and mechanism

Spongy Ni/Fe carbonate - fluorapatite was synthesized from natural phosphorite enriched with iron impurities. The morphological, chemical and structural features of the product were estimated using several techniques as XRD, SEM, EDX, and FT-IR. It exhibits spongy structure of nano and micro-pores. The average crystallite size is about 8.27 nm. The suitability of the product for considerable decontamination of Zn²⁺, Co²⁺, and Cu²⁺, ions from water was studied based on several reacting parameters. The equilibrium was attained after 240 min for Zn²⁺ and Co²⁺ ions while the adsorption equilibrium of Cu²⁺ reached after 120 min. The adsorption data for the selected metals was represented well by a pseudo-second-order model which revealed chemisorption uptake. The equilibrium studies were appraised based on traditional models and two advanced models were designed according to the statistical physical theories. The adsorption results highly fitted with Langmuir model followed rather than the other models. This indicated a monolayer adsorption for the metal ions by spongy Ni/Fe carbonate - fluorapatite. The estimated q_max values are 149.25 mg/g, 106.4 mg/g and 147.5 mg/g for the uptake of Zn²⁺, Co²⁺, and Cu²⁺, respectively. Based on monolayer models of one energy and two energies, the number of receptor adsorption sites, number of adsorbed metal ions per active site, the average number of sites which occupied by ions, mono layer adsorption quantity and the adsorption quantity after total saturation were calculated for the first time for such materials.

Assessment of Blend PVDF Membranes, and the Effect of Polymer Concentration and Blend Composition

In this work, PVDF homopolymer was blended with PVDF-co-HFP copolymer and studied in terms of morphology, porosity, pore size, hydrophobicity, permeability, and mechanical properties. Different solvents, namely N-Methyl-2 pyrrolidone (NMP), Tetrahydrofuran (THF), and Dimethylformamide (DMF) solvents, were used to fabricate blended PVDF flat sheet membranes without the introduction of any pore forming agent, through a non-solvent induced phase separation (NIPS) technique. Furthermore, the performance of the fabricated membranes was investigated for pressure and thermal driven applications. The porosity of the membranes was slightly increased with the increase in the overall content of PVDF and by the inclusion of PVDF copolymer. Total PVDF content, copolymer content, and mixed-solvent have a positive effect on mechanical properties. The addition of copolymer increased the hydrophobicity when the total PVDF content was 20%. At 25% and with the inclusion of mixed-solvent, the hydrophobicity was adversely affected. The permeability of the membranes increased with the increase in the overall content of PVDF. Mixed-solvents significantly improved permeability.