Continuous Ethanol Fermentation of Pretreated Lignocellulosic Biomasses, Waste Biomasses, Molasses and Syrup Using the Anaerobic, Thermophilic Bacterium Thermoanaerobacter italicus Pentocrobe 411

Lignocellosic ethanol production is now at a stage where commercial or semi-commercial plants are coming online and, provided cost effective production can be achieved, lignocellulosic ethanol will become an important part of the world bio economy. However, challenges are still to be overcome throughout the process and particularly for the fermentation of the complex sugar mixtures resulting from the hydrolysis of hemicellulose. Here we describe the continuous fermentation of glucose, xylose and arabinose from non-detoxified pretreated wheat straw, birch, corn cob, sugar cane bagasse, cardboard, mixed bio waste, oil palm empty fruit bunch and frond, sugar cane syrup and sugar cane molasses using the anaerobic, thermophilic bacterium Thermoanaerobacter Pentocrobe 411. All fermentations resulted in close to maximum theoretical ethanol yields of 0.47–0.49 g/g (based on glucose, xylose, and arabinose), volumetric ethanol productivities of 1.2–2.7 g/L/h and a total sugar conversion of 90–99% including glucose, xylose and arabinose. The results solidify the potential of Thermoanaerobacter strains as candidates for lignocellulose bioconversion.

Partition enrichment of nucleotide sequences (PINS)--a generally applicable, sequence based method for enrichment of complex DNA samples

The dwindling cost of DNA sequencing is driving transformative changes in various biological disciplines including medicine, thus resulting in an increased need for routine sequencing. Preparation of samples suitable for sequencing is the starting point of any practical application, but enrichment of the target sequence over background DNA is often laborious and of limited sensitivity thereby limiting the usefulness of sequencing. The present paper describes a new method, Probability directed Isolation of Nucleic acid Sequences (PINS), for enrichment of DNA, enabling the sequencing of a large DNA region surrounding a small known sequence. A 275,000 fold enrichment of a target DNA sample containing integrated human papilloma virus is demonstrated. Specifically, a sample containing 0.0028 copies of target sequence per ng of total DNA was enriched to 786 copies per ng. The starting concentration of 0.0028 target copies per ng corresponds to one copy of target in a background of 100,000 complete human genomes. The enriched sample was subsequently amplified using rapid genome walking and the resulting DNA sequence revealed not only the sequence of a the truncated virus, but also 1026 base pairs 5' and 50 base pairs 3' to the integration site in chromosome 8. The demonstrated enrichment method is extremely sensitive and selective and requires only minimal knowledge of the sequence to be enriched and will therefore enable sequencing where the target concentration relative to background is too low to allow the use of other sample preparation methods or where significant parts of the target sequence is unknown.

Rapid and reliable method for identification of associated endonuclease cleavage and recognition sites

One barrier to cross during genetic engineering is the restriction-modification system found in many bacteria. In this study, we developed a fast and reliable method for mapping the recognition and cleavage site of the restriction endonucleases. Clostridium pasteurianum, a model organism for the study of nitrogen fixation, has been found to harbour at least two restriction-modification systems including the restriction endonucleases CpaPI, which is an isoschizomer of MboI and CpaAI. Dam-methylated DNA was used to isolate the activity of CpaAI. Exposing freshly prepared cell lysate to known nucleotide fragments and directly sequencing the pool of digested nucleotide fragments enabled identification of the cleavage sites in the fragments. By aligning the sequences adjacent to the cleavage site, it was possible to identify the recognition sequence. Using this method, we successfully located all CpaAI recognition and cleavage sites within the template sequence. By modifying DNA with both Dam and CpG methylases (M.SssI) and thereby preventing digestion by CpaPI and CpaAI, no further endonuclease activity was detected.

SIGNIFICANCE AND IMPACT OF THE STUDY

Restriction-modification systems are important barriers to successful genetic modification in many bacterial species. In this study, we demonstrate an efficient and general applicable method for identifying endonuclease recognition and cleavage sites. For the study and the trails, the model organism for nitrogen fixation Clostridium pasteurianum was used. The method was proven to be reliable, and by modifying DNA at the identified sites, it is possible to prevent digestion.

Production of 1,3-PDO and butanol by a mutant strain of Clostridium pasteurianum with increased tolerance towards crude glycerol

The production of biodiesel results in a concomitant production of crude glycerol (10% w/w). Clostridium pasteurianum can utilize glycerol as sole carbon source and converts it into 1,3-propanediol, ethanol, butanol, and CO₂. Reduced growth and productivities on crude glycerol as compared to technical grade glycerol have previously been observed. In this study, we applied random mutagenesis mediated by ethane methyl sulfonate (EMS) to develop a mutant strain of C. pasteurianum tolerating high concentrations of crude glycerol. At an initial crude glycerol concentration of 25 g/l the amount of dry cell mass produced by the mutant strain was six times higher than the amount produced by the wild type. Growth of the mutant strain was even detected at an initial crude glycerol concentration of 105 g/l. A pH controlled reactor with in situ removal of butanol by gas-stripping was used to evaluate the performance of the mutant strain. Utilizing stored crude glycerol, the mutant strain showed significantly increased rates compared to the wild type. A maximum glycerol utilization rate of 7.59 g/l/h was observed along with productivities of 1.80 g/l/h and 1.21 g/l/h of butanol and 1,3-PDO, respectively. These rates are higher than what previously has been published for C. pasteurianum growing on technical grade glycerol in fed batch reactors. In addition, high yields of the main products (butanol and 1,3-PDO) were detected and these two products were efficiently separated in two steams using gas-stripping.

Fermentation of crude glycerol from biodiesel production by Clostridium pasteurianum

Clostridium pasteurianum can utilize glycerol as the sole carbon source for the production of butanol and 1,3-propanediol. Crude glycerol derived from biodiesel production has been shown to be toxic to the organism even in low concentrations. By examination of different pretreatments we found that storage combined with activated stone carbon addition facilitated the utilization of crude glycerol. A pH-controlled reactor with in situ removal of butanol by gas stripping was used to evaluate the performance. The fermentation pattern on pretreated crude glycerol was quite similar to that on technical grade glycerol. C. pasteurianum was able to utilize 111 g/l crude glycerol. The average consumption rate was 2.49 g/l/h and maximum consumption rate was 4.08 g/l/h. At the maximal glycerol consumption rate butanol was produced at 1.3 g/l/h. These rates are higher than those previously reported for fermentations on technical grade glycerol by the same strain. A process including pretreatment and subsequent fermentation of the crude glycerol could be usable for industrial production of butanol by C. pasteurianum.

Identification and overexpression of a bifunctional aldehyde/alcohol dehydrogenase responsible for ethanol production in Thermoanaerobacter mathranii

Thermoanaerobacter mathranii contains four genes, adhA, adhB, bdhA and adhE, predicted to code for alcohol dehydrogenases involved in ethanol metabolism. These alcohol dehydrogenases were characterized as NADP(H)-dependent primary alcohol dehydrogenase (AdhA), secondary alcohol dehydrogenase (AdhB), butanol dehydrogenase (BdhA) and NAD(H)-dependent bifunctional aldehyde/alcohol dehydrogenase (AdhE), respectively. Here we observed that AdhE is an important enzyme responsible for ethanol production in T. mathranii based on the constructed adh knockout strains. An adhE knockout strain fails to produce ethanol as a fermentation product, while other adh knockout strains showed no significant difference from the wild type. Further analysis revealed that the ΔadhE strain was defective in aldehyde dehydrogenase activity, but still maintained alcohol dehydrogenase activity. This showed that AdhE is the major aldehyde dehydrogenase in the cell and functions predominantly in the acetyl-CoA reduction to acetaldehyde in the ethanol formation pathway. Finally, AdhE was conditionally expressed from a xylose-induced promoter in a recombinant strain (BG1E1) with a concomitant deletion of a lactate dehydrogenase. Overexpressions of AdhE in strain BG1E1 with xylose as a substrate facilitate the production of ethanol at an increased yield.

Metabolic engineering to improve ethanol production in Thermoanaerobacter mathranii

Thermoanaerobacter mathranii can produce ethanol from lignocellulosic biomass at high temperatures, but its biotechnological exploitation will require metabolic engineering to increase its ethanol yield. With a cofactor-dependent ethanol production pathway in T. mathranii, it may become crucial to regenerate cofactor to increase the ethanol yield. Feeding the cells with a more reduced carbon source, such as mannitol, was shown to increase ethanol yield beyond that obtained with glucose and xylose. The ldh gene coding for lactate dehydrogenase was previously deleted from T. mathranii to eliminate an NADH oxidation pathway. To further facilitate NADH regeneration used for ethanol formation, a heterologous gene gldA encoding an NAD(+)-dependent glycerol dehydrogenase was expressed in T. mathranii. One of the resulting recombinant strains, T. mathranii BG1G1 (Deltaldh, P(xyl)GldA), showed increased ethanol yield in the presence of glycerol using xylose as a substrate. With an inactivated lactate pathway and expressed glycerol dehydrogenase activity, the metabolism of the cells was shifted toward the production of ethanol over acetate, hence restoring the redox balance. It was also shown that strain BG1G1 acquired the capability to utilize glycerol as an extra carbon source in the presence of xylose, and utilization of the more reduced substrate glycerol resulted in a higher ethanol yield.

Cloning, sequencing, and sequence analysis of two novel plasmids from the thermophilic anaerobic bacterium Anaerocellum thermophilum

The nucleotide sequence of two novel plasmids isolated from the extreme thermophilic anaerobic bacterium Anaerocellum thermophilum DSM6725 (A. thermophilum), growing optimally at 70 degrees C, has been determined. pBAS2 was found to be a 3653 bp plasmid with a GC content of 43%, and the sequence revealed 10 open reading frames (ORFs). The two largest of these, namely Orf21 and Orf41, showed similarity to a Bacillus plasmid recombinase and a Pseudoalteromonas plasmid replication protein, respectively. A sequence with homology to double stranded replication origins from rolling circle plasmids was found, but no single stranded intermediates, characteristic of rolling circle replication, were found on Southern blots. The larger plasmid, pBAL, was found to be a 8294 bp plasmid with a GC content of 39%. It revealed 17 ORFs, of which three showed similarity at the amino acid (aa) level to known proteins. Orf22 showed the strongest similarity (33% aa) to replication proteins from large multiresistance Staphylococcal and Lactococcal plasmids, all of which are believed to replicate via a theta-like replication mechanism. Orf32 showed similarity to both DNA repair proteins and DNA polymerases with highest similarity to DNA repair protein from Campylobacter jejuni (25% aa). Orf34 showed similarity to sigma factors with highest similarity (28% aa) to the sporulation specific Sigma factor, Sigma 28(K) from Bacillus thuringiensis.