The potential of thermally expanded graphite in oil sorption applications

An oil spill occurs when liquid petroleum hydrocarbons are released into the environment, whether accidentally or intentionally, in substantial quantities. The impact of an oil spill on the ecosystem is significant and should not be underestimated. Various techniques are employed to address oil spills, including mechanical, physical, biological, and physicochemical methods. Among these techniques, adsorption is considered the most suitable approach. Adsorption is promising due to its simplicity, ease of use, high removal capacity, and rapid pollutant removal. An excellent adsorbent material exhibits unique characteristics that enhance its efficacy in liquid adsorption. Sorbents are categorized into synthetic and natural types. Porous carbon materials, especially expanded graphite, are widely utilized in wastewater treatment due to their micropores and exceptional adsorption capacity. The distinctive properties of expanded graphite, including its low density, high porosity, and electrical conductivity, have garnered significant global attention for various potential applications. In essence, expanded graphite offers a powerful and practical approach to oil spill cleanup due to its efficient oil adsorption, selective targeting, ease of use, and potential reusability. This review article summarizes the preparation techniques, structure, and properties of expanded graphite. It also delves into recent advancements in using expanded graphite for oil spill cleanup. The article concludes by outlining potential future directions in this field and discussing the commercial viability of some of these techniques.

A Study on the Utilization of Coal Fly Ash Derived Grog in Clay Ceramics

Grog is an additive material that plays important roles in ceramic making. It improves the fabrication process of green bodies as well as the physical properties of fired bodies. Few low-cost materials and wastes have found their application as grog in recent years, thus encouraging the replacement of commercial grogs with cost-saving materials. Coal fly ash, a combustion waste produced by coal-fired power plant, has the potential to be converted into grog owing to its small particle sizes and high content of silica and alumina. In this study, grog was derived from coal fly ash and mixed with kaolin clay to produce ceramics. Effects of the grog addition on the resultant ceramics were investigated. It was found that, to a certain extent, the grog addition reduced the firing shrinkage and increased the total porosity of the ceramics. The dimensional stability of the ceramics at a firing temperature of 1200 °C was also not noticeably affected by the grog. However, the grog addition in general had negative effects on the biaxial flexural strength and refractoriness of the ceramics.

Characterization of Sago-based Biochar as Potential Feedstock for Solid Fuel

Due to decreasing supply of fossil fuels and growing environmental concerns, the application of biomass-derived energy is gaining in importance nowadays. In this study, batch pyrolysis was used to derive biochar from Sago (Metroxylon Spp) in an electrical furnance reactor. Raw biomass was selected from different sources of Sago palm including barks, fronds and cortex and the characterization was conducted for each source individually. The range between 350 ºC and 550 ºC temperature, the materials were pyrolyzed and with constant nitrogen flow rate of 50 mL min-1. Each sample of biochar produced are evaluated through proximate analysis, ultimate analysis and scanning electron microscopy (SEM) to study its potential as solid fuel for energy production. The pH value of biochar was also calculated experimentally. The total yield following by the amount of ash, volatile matter, fixed carbon content and high heating value (calorific value) were obtained in the results of all three biochar samples. Various pyrolysis temperatures resulted in different char production yield and therefore the carbon content of the produced biochars were varied within the range of 40 to 53 wt. % which is corresponded to 35 to 40 wt. % of the carbon content in biomass samples. The pH of biochar was observed to increase from 7 to 8.3 with temperature rised from 350 ºC to 550 ºC. The results from this study can be used to establish the ideal utilization routes of biomass in production of biochar as well as the source of energy.

Detection of Citrus tristeza virus by using fluorescence resonance energy transfer-based biosensor

Due to the low titer or uneven distribution of Citrus tristeza virus (CTV) in field samples, detection of CTV by using conventional detection techniques may be difficult. Therefore, in the present work, the cadmium-telluride quantum dots (QDs) was conjugated with a specific antibody against coat protein (CP) of CTV, and the CP were immobilized on the surface of gold nanoparticles (AuNPs) to develop a specific and sensitive fluorescence resonance energy transfer (FRET)-based nanobiosensor for detecting CTV. The maximum FRET efficiency for the developed nano-biosensor was observed at 60% in AuNPs-CP/QDs-Ab ratio of 1:8.5. The designed system showed higher sensitivity and specificity over enzyme linked immunosorbent assay (ELISA) with a limit of detection of 0.13μgmL(-1) and 93% and 94% sensitivity and specificity, respectively. As designed sensor is rapid, sensitive, specific and efficient in detecting CTV, this could be envisioned for diagnostic applications, surveillance and plant certification program.

Effect of growing graphene flakes on branched carbon nanofibers based on carbon fiber on mechanical and thermal properties of polypropylene

A one-step process, the chemical vapor deposition method, has been used to fabricate graphene flakes (G) on branched carbon nanofibers (CNF) grown on carbon fibers (CF).

Development of sandwich-form biosensor to detect Mycobacterium tuberculosis complex in clinical sputum specimens

Mycobacterium tuberculosis, the causing agent of tuberculosis, comes second only after HIV on the list of infectious agents slaughtering many worldwide. Due to the limitations behind the conventional detection methods, it is therefore critical to develop new sensitive sensing systems capable of quick detection of the infectious agent. In the present study, the surface modified cadmium-telluride quantum dots and gold nanoparticles conjunct with two specific oligonucleotides against early secretory antigenic target 6 were used to develop a sandwich-form fluorescence resonance energy transfer-based biosensor to detect M. tuberculosis complex and differentiate M. tuberculosis and M. bovis Bacille Calmette-Guerin simultaneously. The sensitivity and specificity of the newly developed biosensor were 94.2% and 86.6%, respectively, while the sensitivity and specificity of polymerase chain reaction and nested polymerase chain reaction were considerably lower, 74.2%, 73.3% and 82.8%, 80%, respectively. The detection limits of the sandwich-form fluorescence resonance energy transfer-based biosensor were far lower (10 fg) than those of the polymerase chain reaction and nested polymerase chain reaction (100 fg). Although the cost of the developed nanobiosensor was slightly higher than those of the polymerase chain reaction-based techniques, its unique advantages in terms of turnaround time, higher sensitivity and specificity, as well as a 10-fold lower detection limit would clearly recommend this test as a more appropriate and cost-effective tool for large scale operations.