Treatment of mining acidic leachates with indigenous limestone, Zimapan Mexico

An experimental study to evaluate the potential of using indigenous limestones in a passive system to treat acid mine drainage, at a mining zone of Mexico was carried out. Chemical and mineralogical characteristics of four types of native rocks (KIT1, KIT2, KSS, QZ) showed distinct CaCO3 contents. Synthetic aqueous leachates from an old tailings impoundment had a pH of 2.18, 34 mg/L As, 705 mg/L Fetotal, and 3975 mg/L SO4(2-). To evaluate dissolution behavior of rocks, kinetic batch experiments with an acid Fe-rich solution were performed. Decaying kinetic constants adjusting H(+) concentration to a first order exponential process were: KIT1 (k = 2.89), KIT2 (k = 0.89) and KSS (k = 0.47). Infrared spectrum and XRD of precipitates showed schwertmannite formation. To determine As and heavy metals (Fe, Cd, Zn, Al) removal from the synthetic leachates, batch experiments using KIT1 were developed. Arsenic decreased from 34.00 mg/L to 0.04 mg/L, Fe and Al were totally removed, and concentrations of Zn and Cd decreased 88% and 91% respectively. Analyses by IR and SEM-EDS indicate that co-precipitation with Fe-Hydroxides formed upon leachate interaction with limestone is the main As removal process. Chamosite, identified by XRD may participate in the removal of Al, SiO2 and a fraction of Fe.

Distribution, origin and fate of chromium in soils in Guanajuato, Mexico

Total, hexavalent and trivalent chromium were determined in surface and 30-cm depth soil samples from a highly chromium-polluted area in Guanajuato state, central México. Four samples were also analyzed by a sequential extraction procedure. Nearly 0.9 km(2) out of the 8 km(2) area sampled was polluted with chromium, at concentrations up to 12960 mg kg(-1), mostly as Cr(III). Concentrations of Cr(VI) were lower than 0.5 mg kg(-1) in most sampled points, with the exception of one, where the concentration was found to be 65.14 mg kg(-1). Chromiumcontaining dust from a chromate factory accounted for most of the contamination. The highest concentrations of hexavalent chromium in soil, were in the bottom sediments of an abandoned water reservoir used to store polluted water from a well, before use of the water in the factory process. Tannery wastes, dust from a sanitary landfill of chromate compounds and the transport of chromium products are the sources of chromium at other sites. Chromium is fixed preferentially in the hydrous Fe and Mn oxides in the more polluted soils. Less polluted soils have a high proportion of chromium associated with the sulfide and organic fraction. Cr(III) is retained preferentially in the superficial soil layer. Variations in the physical characteristics of the soil, relative abundance of the various soil components and characteristics of the contaminant source, give rise to differences in chromium soil concentrations with depth.