Simplified formulations with high drug loads for continuous twin-screw granulation

As different batches of the same excipients will be intermixed during continuous processes, the traceability of batches is complicated. Simplified formulations may help to reduce problems related to batch intermixing and traceability. Twin-screw granulation with subsequent tableting was used to produce granules and tablets, containing drug, disintegrant and binder (binary and ternary mixtures), only. Drug loads up to 90% were achieved and five different disintegrants were screened for keeping their disintegration suitability after wetting. Granule size distributions were consistently mono-modal and narrow. Granule strength reached higher values, using ternary mixtures. Tablets containing croscarmellose-Na as disintegrant displayed tensile strengths up to 3.1MPa and disintegration times from 400 to 466s, resulting in the most robust disintegrant. Dissolution was overall complete and above 96% within 30 min. Na-starch glycolate offers tensile strengths up to 2.8MPa at disintegration times from 25s to 1031s, providing the broadest application window, as it corresponds in some parts to different definitions of orodispersible tablets. Tablets containing micronized crospovidone are not suitable for immediate release, but showed possibilities to produce highly drug loaded, prolonged release tablets. Tablets and granules from simplified formulations offer great opportunities to improve continuous processes, present performances comparable to more complicated formulations and are able to correspond to requirements of the authorities.

Properties of ibuprofen crystallized under various conditions: a comparative study

Different crystal forms of the analgesic drug ibuprofen were prepared and characterized in this study. Various conditions were used for the crystallization: crystallization was carried out using the solvent change method, the temperature change method, and the solvent evaporation method. Crystals were grown from different solvents. Different crystal forms with different properties were observed: cubic, needle-shaped, and plate-shaped crystals were obtained. Spherical agglomeration occurs when crystallization is carried out in acetonitrile or methanol. Flowability of these spherical crystals is increased. All crystals were determined as isomorphic by differential scanning calorimetry and x-ray analysis--which queries doubtful results of recent publications. Properties like dissolution behavior and properties influencing the manufacturing of dosage forms--like flowability--differ. Thus the choice of the optimal preparation method influencing the crystal habit is important in manufacturing the drug ibuprofen.

Properties of ibuprofen crystallized under various conditions: a comparative study

Different crystal forms of the analgesic drug ibuprofen were prepared and characterized in this study. Various conditions were used for the crystallization: crystallization was carried out using the solvent change method, the temperature change method, and the solvent evaporation method. Crystals were grown from different solvents. Different crystal forms with different properties were observed: cubic, needle-shaped, and plate-shaped crystals were obtained. Spherical agglomeration occurs when crystallization is carried out in acetonitrile or methanol. Flowability of these spherical crystals is increased. All crystals were determined as isomorphic by differential scanning calorimetry and x-ray analysis--which queries doubtful results of recent publications. Properties like dissolution behavior and properties influencing the manufacturing of dosage forms--like flowability--differ. Thus the choice of the optimal preparation method influencing the crystal habit is important in manufacturing the drug ibuprofen.