Study of High-Transverse-Momentum Higgs Boson Production in Association with a Vector Boson in the qqbb Final State with the ATLAS Detector

This Letter presents the first study of Higgs boson production in association with a vector boson (V=W or Z) in the fully hadronic qqbb final state using data recorded by the ATLAS detector at the LHC in proton-proton collisions at sqrt[s]=13  TeV and corresponding to an integrated luminosity of 137  fb^{-1}. The vector bosons and Higgs bosons are each reconstructed as large-radius jets and tagged using jet substructure techniques. Dedicated tagging algorithms exploiting b-tagging properties are used to identify jets consistent with Higgs bosons decaying into bb[over ¯]. Dominant backgrounds from multijet production are determined directly from the data, and a likelihood fit to the jet mass distribution of Higgs boson candidates is used to extract the number of signal events. The VH production cross section is measured inclusively and differentially in several ranges of Higgs boson transverse momentum: 250-450, 450-650, and greater than 650 GeV. The inclusive signal yield relative to the standard model expectation is observed to be μ=1.4_{-0.9}^{+1.0} and the corresponding cross section is 3.1±1.3(stat)_{-1.4}^{+1.8}(syst)  pb.

Measurement of the Centrality Dependence of the Dijet Yield in p+Pb Collisions at sqrt[s_{NN}]=8.16 TeV with the ATLAS Detector

ATLAS measured the centrality dependence of the dijet yield using 165  nb^{-1} of p+Pb data collected at sqrt[s_{NN}]=8.16  TeV in 2016. The event centrality, which reflects the p+Pb impact parameter, is characterized by the total transverse energy registered in the Pb-going side of the forward calorimeter. The central-to-peripheral ratio of the scaled dijet yields, R_{CP}, is evaluated, and the results are presented as a function of variables that reflect the kinematics of the initial hard parton scattering process. The R_{CP} shows a scaling with the Bjorken x of the parton originating from the proton, x_{p}, while no such trend is observed as a function of x_{Pb}. This analysis provides unique input to understanding the role of small proton spatial configurations in p+Pb collisions by covering parton momentum fractions from the valence region down to x_{p}∼10^{-3} and x_{Pb}∼4×10^{-4}.

Search for New Phenomena in Two-Body Invariant Mass Distributions Using Unsupervised Machine Learning for Anomaly Detection at sqrt[s]=13 TeV with the ATLAS Detector

Searches for new resonances are performed using an unsupervised anomaly-detection technique. Events with at least one electron or muon are selected from 140  fb^{-1} of pp collisions at sqrt[s]=13  TeV recorded by ATLAS at the Large Hadron Collider. The approach involves training an autoencoder on data, and subsequently defining anomalous regions based on the reconstruction loss of the decoder. Studies focus on nine invariant mass spectra that contain pairs of objects consisting of one light jet or b jet and either one lepton (e,μ), photon, or second light jet or b jet in the anomalous regions. No significant deviations from the background hypotheses are observed. Limits on contributions from generic Gaussian signals with various widths of the resonance mass are obtained for nine invariant masses in the anomalous regions.

Observation of WZγ Production in pp Collisions at sqrt[s]=13 TeV with the ATLAS Detector

This Letter reports the observation of WZγ production and a measurement of its cross section using 140.1±1.2  fb^{-1} of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. The WZγ production cross section, with both the W and Z bosons decaying leptonically, pp→WZγ→ℓ^{'}^{±}νℓ^{+}ℓ^{-}γ (ℓ^{(^{'})}=e, μ), is measured in a fiducial phase-space region defined such that the leptons and the photon have high transverse momentum and the photon is isolated. The cross section is found to be 2.01±0.30(stat)±0.16(syst)  fb. The corresponding standard model predicted cross section calculated at next-to-leading order in perturbative quantum chromodynamics and at leading order in the electroweak coupling constant is 1.50±0.06  fb. The observed significance of the WZγ signal is 6.3σ, compared with an expected significance of 5.0σ.

Combined Measurement of the Higgs Boson Mass from the H→γγ and H→ZZ^{*}→4ℓ Decay Channels with the ATLAS Detector Using sqrt[s]=7, 8, and 13 TeV pp Collision Data

A measurement of the mass of the Higgs boson combining the H→ZZ^{*}→4ℓ and H→γγ decay channels is presented. The result is based on 140  fb^{-1} of proton-proton collision data collected by the ATLAS detector during LHC run 2 at a center-of-mass energy of 13 TeV combined with the run 1 ATLAS mass measurement, performed at center-of-mass energies of 7 and 8 TeV, yielding a Higgs boson mass of 125.11±0.09(stat)±0.06(syst)=125.11±0.11  GeV. This corresponds to a 0.09% precision achieved on this fundamental parameter of the Standard Model of particle physics.

Search for Dark Photons in Rare Z Boson Decays with the ATLAS Detector

A search for events with a dark photon produced in association with a dark Higgs boson via rare decays of the standard model Z boson is presented, using 139  fb^{-1} of sqrt[s]=13  TeV proton-proton collision data recorded by the ATLAS detector at the Large Hadron Collider. The dark boson decays into a pair of dark photons, and at least two of the three dark photons must each decay into a pair of electrons or muons, resulting in at least two same-flavor opposite-charge lepton pairs in the final state. The data are found to be consistent with the background prediction, and upper limits are set on the dark photon's coupling to the dark Higgs boson times the kinetic mixing between the standard model photon and the dark photon, α_{D}ϵ^{2}, in the dark photon mass range of [5, 40] GeV except for the ϒ mass window [8.8, 11.1] GeV. This search explores new parameter space not previously excluded by other experiments.

Observation of Single-Top-Quark Production in Association with a Photon Using the ATLAS Detector

This Letter reports the observation of single top quarks produced together with a photon, which directly probes the electroweak coupling of the top quark. The analysis uses 139  fb^{-1} of 13 TeV proton-proton collision data collected with the ATLAS detector at the Large Hadron Collider. Requiring a photon with transverse momentum larger than 20 GeV and within the detector acceptance, the fiducial cross section is measured to be 688±23(stat) _{-71}^{+75}(syst)  fb, to be compared with the standard model prediction of 515_{-42}^{+36}  fb at next-to-leading order in QCD.

Measurement of Suppression of Large-Radius Jets and Its Dependence on Substructure in Pb+Pb Collisions at sqrt[s_{NN}]=5.02 TeV with the ATLAS Detector

This letter presents a measurement of the nuclear modification factor of large-radius jets in sqrt[s_{NN}]=5.02  TeV Pb+Pb collisions by the ATLAS experiment. The measurement is performed using 1.72  nb^{-1} and 257  pb^{-1} of Pb+Pb and pp data, respectively. The large-radius jets are reconstructed with the anti-k_{t} algorithm using a radius parameter of R=1.0, by reclustering anti-k_{t} R=0.2 jets, and are measured over the transverse momentum (p_{T}) kinematic range of 158 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Measurement of the Sensitivity of Two-Particle Correlations in pp Collisions to the Presence of Hard Scatterings

A key open question in the study of multiparticle production in high-energy pp collisions is the relationship between the "ridge"-i.e., the observed azimuthal correlations between particles in the underlying event that extend over all rapidities-and hard or semihard scattering processes. In particular, it is not known whether jets or their soft fragments are correlated with particles in the underlying event. To address this question, two-particle correlations are measured in pp collisions at sqrt[s]=13  TeV using data collected by the ATLAS experiment at the LHC, with an integrated luminosity of 15.8  pb^{-1}, in two different configurations. In the first case, charged particles associated with jets are excluded from the correlation analysis, while in the second case, correlations are measured between particles within jets and charged particles from the underlying event. Second-order flow coefficients, v_{2}, are presented as a function of event multiplicity and transverse momentum. These measurements show that excluding particles associated with jets does not affect the measured correlations. Moreover, particles associated with jets do not exhibit any significant azimuthal correlations with the underlying event, ruling out hard processes contributing to the ridge.

Observation of an Excess of Dicharmonium Events in the Four-Muon Final State with the ATLAS Detector

A search is made for potential ccc[over ¯]c[over ¯] tetraquarks decaying into a pair of charmonium states in the four muon final state using proton-proton collision data at sqrt[s]=13  TeV, corresponding to an integrated luminosity of 140  fb^{-1} recorded by the ATLAS experiment at LHC. Two decay channels, J/ψ+J/ψ→4μ and J/ψ+ψ(2S)→4μ, are studied. Backgrounds are estimated based on a hybrid approach involving Monte Carlo simulations and data-driven methods. Statistically significant excesses with respect to backgrounds dominated by the single parton scattering are seen in the di-J/ψ channel consistent with a narrow resonance at 6.9 GeV and a broader structure at lower mass. A statistically significant excess is also seen in the J/ψ+ψ(2S) channel. The fitted masses and decay widths of the structures are reported.

Observation of the γγ→ττ Process in Pb+Pb Collisions and Constraints on the τ-Lepton Anomalous Magnetic Moment with the ATLAS Detector

This Letter reports the observation of τ-lepton-pair production in ultraperipheral lead-lead collisions Pb+Pb→Pb(γγ→ττ)Pb and constraints on the τ-lepton anomalous magnetic moment a_{τ}. The dataset corresponds to an integrated luminosity of 1.44  nb^{-1} of LHC Pb+Pb collisions at sqrt[s_{NN}]=5.02  TeV recorded by the ATLAS experiment in 2018. Selected events contain one muon from a τ-lepton decay, an electron or charged-particle track(s) from the other τ-lepton decay, little additional central-detector activity, and no forward neutrons. The γγ→ττ process is observed in Pb+Pb collisions with a significance exceeding 5 standard deviations and a signal strength of μ_{ττ}=1.03_{-0.05}^{+0.06} assuming the standard model value for a_{τ}. To measure a_{τ}, a template fit to the muon transverse-momentum distribution from τ-lepton candidates is performed, using a dimuon (γγ→μμ) control sample to constrain systematic uncertainties. The observed 95% confidence-level interval for a_{τ} is -0.057 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Strong Constraints on Jet Quenching in Centrality-Dependent p+Pb Collisions at 5.02 TeV from ATLAS

Jet quenching is the process of color-charged partons losing energy via interactions with quark-gluon plasma droplets created in heavy-ion collisions. The collective expansion of such droplets is well described by viscous hydrodynamics. Similar evidence of collectivity is consistently observed in smaller collision systems, including pp and p+Pb collisions. In contrast, while jet quenching is observed in Pb+Pb collisions, no evidence has been found in these small systems to date, raising fundamental questions about the nature of the system created in these collisions. The ATLAS experiment at the Large Hadron Collider has measured the yield of charged hadrons correlated with reconstructed jets in 0.36  nb^{-1} of p+Pb and 3.6  pb^{-1} of pp collisions at 5.02 TeV. The yields of charged hadrons with p_{T}^{ch}>0.5  GeV near and opposite in azimuth to jets with p_{T}^{jet}>30 or 60 GeV, and the ratios of these yields between p+Pb and pp collisions, I_{pPb}, are reported. The collision centrality of p+Pb events is categorized by the energy deposited by forward neutrons from the struck nucleus. The I_{pPb} values are consistent with unity within a few percent for hadrons with p_{T}^{ch}>4  GeV at all centralities. These data provide new, strong constraints that preclude almost any parton energy loss in central p+Pb collisions.

Test of CP Invariance in Higgs Boson Vector-Boson-Fusion Production Using the H→γγ Channel with the ATLAS Detector

A test of CP invariance in Higgs boson production via vector-boson fusion has been performed in the H→γγ channel using 139  fb^{-1} of proton-proton collision data at sqrt[s]=13  TeV collected by the ATLAS detector at the LHC. The optimal observable method is used to probe the CP structure of interactions between the Higgs boson and electroweak gauge bosons, as described by an effective field theory. No sign of CP violation is observed in the data. Constraints are set on the parameters describing the strength of the CP-odd component in the coupling between the Higgs boson and the electroweak gauge bosons in two effective field theory bases: d[over ˜] in the HISZ basis and c_{HW[over ˜]} in the Warsaw basis. The results presented are the most stringent constraints on CP violation in the coupling between Higgs and weak bosons. The 95% C.L. constraint on d[over ˜] is derived for the first time and the 95% C.L. constraint on c_{HW[over ˜]} has been improved by a factor of 5 compared to the previous measurement.

A detailed map of Higgs boson interactions by the ATLAS experiment ten years after the discovery

The standard model of particle physics1-4 describes the known fundamental particles and forces that make up our Universe, with the exception of gravity. One of the central features of the standard model is a field that permeates all of space and interacts with fundamental particles5-9. The quantum excitation of this field, known as the Higgs field, manifests itself as the Higgs boson, the only fundamental particle with no spin. In 2012, a particle with properties consistent with the Higgs boson of the standard model was observed by the ATLAS and CMS experiments at the Large Hadron Collider at CERN10,11. Since then, more than 30 times as many Higgs bosons have been recorded by the ATLAS experiment, enabling much more precise measurements and new tests of the theory. Here, on the basis of this larger dataset, we combine an unprecedented number of production and decay processes of the Higgs boson to scrutinize its interactions with elementary particles. Interactions with gluons, photons, and W and Z bosons-the carriers of the strong, electromagnetic and weak forces-are studied in detail. Interactions with three third-generation matter particles (bottom (b) and top (t) quarks, and tau leptons (τ)) are well measured and indications of interactions with a second-generation particle (muons, μ) are emerging. These tests reveal that the Higgs boson discovered ten years ago is remarkably consistent with the predictions of the theory and provide stringent constraints on many models of new phenomena beyond the standard model.

Structure and interactions at the Mg(0001)/water interface: An ab initio study

A molecular level understanding of metal/bulk water interface structure is key for a wide range of processes, including aqueous corrosion, which is our focus, but their buried nature makes experimental investigation difficult and we must mainly rely on simulations. We investigate the Mg(0001)/water interface using second generation Car–Parrinello molecular dynamics (MD) to gain structural information, combined with static density functional theory calculations to probe the atomic interactions and electronic structure (e.g., calculating the potential of zero charge). By performing detailed structural analyses of both metal–surface atoms and the near-surface water, we find that, among other insights: (i) water adsorption causes significant surface roughening (the planar distribution for top-layer Mg has two peaks separated by [Formula: see text]), (ii) strongly adsorbed water covers only [Formula: see text] of available surface sites, and (iii) adsorbed water avoids clustering on the surface. Static calculations are used to gain a deeper understanding of the structuring observed in MD. For example, we use an energy decomposition analysis combined with calculated atomic charges to show that adsorbate clustering is unfavorable due to Coulombic repulsion between adsorption site surface atoms. Results are discussed in the context of previous simulations carried out on other metal/water interfaces. The largest differences for the Mg(0001)/water system appear to be the high degree of surface distortion and the minimal difference between the metal work function and metal/water potential of zero charge (at least compared to other interfaces with similar metal–water interaction strengths). The structural information, in this paper, is important for understanding aqueous Mg corrosion, as the Mg(0001)/water interface is the starting point for key reactions. Furthermore, our focus on understanding the driving forces behind this structuring leads to important insights for general metal/water interfaces.

A quantum mechanical study of water adsorption on the (110) surfaces of rutile SnO2 and TiO2: investigating the effects of intermolecular interactions using hybrid-exchange density functional theory

Periodic hybrid-exchange DFT is used to explore the structure and properties of SnO₂(110) and TiO₂(110) surfaces in contact with water.

Simulating Constant Current STM Images of the Rutile TiO2 (110) Surface for Applications in Solar Water Splitting

Solar water splitting has shown promise as a source of environmentally friendly hydrogen fuel. Understanding the interactions between semiconductor surfaces and water is essential to improve conversion efficiencies of water splitting systems. TiO2 has been widely adopted as a reference material and rutile surfaces have been studied experimentally and theoretically. Scanning Tunneling Microscopy (STM) is commonly used to study surfaces, as it probes the atomic and electronic structure of the surface layer. A systematic and transferable method to simulate constant current STM images using local atomic basis set methods is reported. This consists of adding more diffuse p and d functions to the basis sets of surface O and Ti atoms, in order to describe the long range tails of the conduction and valence bands (and, thus, the vacuum above the surface). The rutile TiO2 (110) surface is considered as a case study.

Parallel implementation of the ab initio CRYSTAL program: electronic structure calculations for periodic systems

CRYSTAL is an ab initio electronic structure program, based on the linear combination of atomic orbitals, for periodic systems. This paper concerns the ability of CRYSTAL to exploit massively parallel computer hardware. A brief review of the theory, numerical implementations and parallel solutions will be given and some of the functionalities and capabilities highlighted. Some features that are unique to CRYSTAL will be described and development plans outlined.

Aluminum Chloride as a Solid Is Not a Strong Lewis Acid

Aluminum chloride is used extensively as Lewis acid catalyst in a variety of industrial processes, including Friedel-Crafts and Cl/F exchange reactions. There is a common misconception that pure AlCl3 is itself a Lewis acid. In the current study, we use experimental and computational methods to investigate the surface structure and catalytic properties of solid AlCl3. The catalytic activity of AlCl3 for two halide isomerization reactions is studied and compared with different AlF3 phases. It is shown that pure solid AlCl3 does not catalyze these reactions. The (001) surface of crystalline AlCl(3) is the natural cleavage plane and its structure is predicted via first principles calculations. The chlorine ions in the outermost layer of the material mask the Al3+ ions from the external gas phase. Hence, the experimentally found catalytic properties of pure solid AlCl3 are supported by the predicted surface structure of AlCl3.

Composition and Structure of the α-AlF3(0001) Surface

Strong Lewis acid catalysts are widely used in a variety of industrial processes including Cl/F exchange reactions. Aluminum fluorides (AlF3) have great potential for use in such reactions. Despite the importance of the surface in the catalytic process little is known about the detailed atomic scale structure of AlF3 surfaces. In the current study we employ state of the art surface thermodynamics calculations based on hybrid-exchange density functional theory to predict the composition and structure of the basal plane surface of alpha-AlF3 for the first time. We examine four possible terminations of the alpha-AlF3 (0001) surface and demonstrate that the surface is terminated by a layer containing two fluorine atoms per cell at all realistic fluorine partial pressures. The fluorine ions in the outermost layer of the material reconstruct to mask the Al3+ ion from the external gas phase and consequently we would expect this surface to be inactive as a Lewis acid catalyst in line with experimental observation.

Spin singlet formation in MgTi2O4: evidence of a helical dimerization pattern

The transition-metal spinel MgTi2O4 undergoes a metal-insulator (M-I) transition on cooling below T(M-I)=260 K. A sharp reduction of the magnetic susceptibility below T(M-I) suggests the onset of a magnetic singlet state. Using high-resolution synchrotron and neutron powder diffraction, we have solved the low-temperature crystal structure of MgTi2O4, which is found to contain dimers with short Ti-Ti distances (the locations of the spin singlets) alternating with long bonds to form helices. Band structure calculations based on hybrid exchange density functional theory show that, at low temperatures, MgTi2O4 is an orbitally ordered band insulator.

Stability of polar oxide surfaces

The structures of the polar surfaces of ZnO are studied using ab initio calculations and surface x-ray diffraction. The experimental and theoretical relaxations are in good agreement. The polar surfaces are shown to be very stable; the cleavage energy for the (0001)-Zn and (0001;)-O surfaces is 4.0 J/m(2) comparable to 2.32 J/m(2) for the most stable nonpolar (1010) surface. The surfaces are stabilized by an electronic mechanism involving the transfer of 0.17 electrons between them. This leads to 2D metallic surface states, which has implications for the use of the material in gas sensing and catalytic applications.

Materials science. The hardest known oxide

A material as hard as diamond or cubic boron nitride has yet to be identified, but here we report the discovery of a cotunnite-structured titanium oxide which represents the hardest oxide known. This is a new polymorph of titanium dioxide, where titanium is nine-coordinated to oxygen in the cotunnite (PbCl2) structure. The phase is synthesized at pressures above 60 gigapascals (GPa) and temperatures above 1,000 K and is one of the least compressible and hardest polycrystalline materials to be described.

Effect of diffusion on lithium intercalation in titanium dioxide

A new model of Li intercalation into rutile and anatase structured titania has been developed from first principles calculations. The model includes both thermodynamic and kinetic effects and explains the observed differences in intercalation behavior and their temperature dependence. The important role of strong local deformations of the lattice and elastic screening of interlithium interactions is demonstrated. In addition, a new phase of LiTiO2 is reported.