Strongly reduced lattice thermal conductivity in Sn-doped rare-earth (M) filled skutterudites M x Co4Sb12-y Sn y , promoted by Sb-Sn disordering and phase segregation

CoSb3 thermoelectric skutterudite has been filled with rare-earth metals (M = La, Ce, Yb) and partially doped with Sn in specimens of M x Co4Sb12-y Sn y stoichiometry. This has been achieved under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. A structural investigation using synchrotron X-ray diffraction data reveals a phase segregation in twin skutterudite phases with filling fraction fluctuation and different unit-cell sizes. As a result of three effects acting as phonon scatterers, namely the rattling effect of M at the wide 8a cages of the cubic Im3̄ structure, the phase segregation, and the intrinsic disorder introduced by Sn substitution at the Sb sublattice, the total thermal conductivity (κ) dramatically falls to reach minimum values under 2 W m-1 K-1, well below those typically exhibited by other thermoelectric materials based upon single-filled skutterudites. The power factor is substantially enhanced to 1.11 mW m-1 K-2 in Yb0.5Co4Sb11.6Sn0.4 with respect to the unfilled composition, as a result of the charge transfer promoted by the filler.

Ultralong Spin Lifetime in Light Alkali Atom Doped Graphene

Today's great challenges of energy and informational technologies are addressed with a singular compound, Li- and Na-doped few-layer graphene. All that is impossible for graphite (homogeneous and high-level Na doping) and unstable for single-layer graphene works very well for this structure. The transformation of the Raman G line to a Fano line shape and the emergence of strong, metallic-like electron spin resonance (ESR) modes attest the high level of graphene doping in liquid ammonia for both kinds of alkali atoms. The spin-relaxation time in our materials, deduced from the ESR line width, is 6-8 ns, which is comparable to the longest values found in spin-transport experiments on ultrahigh-mobility graphene flakes. This could qualify our material as a promising candidate in spintronics devices. On the other hand, the successful sodium doping, this being a highly abundant metal, could be an encouraging alternative to lithium batteries.

Giant microwave absorption in fine powders of superconductors

Enhanced microwave absorption, larger than that in the normal state, is observed in fine grains of type-II superconductors (MgB2 and K3C60) for magnetic fields as small as a few % of the upper critical field. The effect is predicted by the theory of vortex motion in type-II superconductors, however its direct observation has been elusive due to skin-depth limitations; conventional microwave absorption studies employ larger samples where the microwave magnetic field exclusion significantly lowers the absorption. We show that the enhancement is observable in grains smaller than the penetration depth. A quantitative analysis on K3C60 in the framework of the Coffey-Clem (CC) theory explains well the temperature dependence of the microwave absorption and also allows to determine the vortex pinning force constant.

Nanostructured Bi2Te3 Prepared by a Straightforward Arc-Melting Method

Thermoelectric materials constitute an alternative source of sustainable energy, harvested from waste heat. Bi2Te3 is the most utilized thermoelectric alloy. We show that it can be readily prepared in nanostructured form by arc-melting synthesis, yielding mechanically robust pellets of highly oriented polycrystals. This material has been characterized by neutron powder diffraction (NPD), scanning electron microscopy (SEM), and electronic and thermal transport measurements. A microscopic analysis from NPD data demonstrates a near-perfect stoichiometry of Bi2Te3 and a fair amount of anharmonicity of the chemical bonds. The as-grown material presents a metallic behavior, showing a record-low resistivity at 320 K of 2 μΩ m, which is advantageous for its performance as a thermoelectric material. SEM analysis shows a stacking of nanosized sheets, each of them presumably single-crystalline, with large surfaces perpendicular to the c crystallographic axis. This nanostructuration notably affects the thermoelectric properties, involving many surface boundaries that are responsible for large phonon scattering factors, yielding a thermal conductivity as low as 1.2 W m(-1) K(-1) around room temperature.

Structural phase transition in polycrystalline SnSe: a neutron diffraction study in correlation with thermoelectric properties

SnSe has been recently reported as a promising and highly efficient thermoelectric intermetallic alloy. The present material has been prepared by arc melting, as mechanically robust pellets, consisting of highly oriented polycrystals. The evolution of its orthorhombic GeS-type structure (space groupPnma) and phase transition to TlI-type structure (space groupCmcm) at high temperature has been studiedin situby neutron powder diffraction (NPD) in the temperature range 295–873 K. This transition has been identified by differential scanning calorimetry measurements, yielding sharp peaks at 795 K. In addition, thermal transport properties were measured in a similar temperature range, and large Seebeck coefficients, as high as 1050 µV K−1at 625 K, were found. The analysis from NPD data demonstrates an almost perfect stoichiometry, Sn0.998(8)Se, that does not evolve with temperature, and a progressive decrease of the anharmonicity of the chemical bonds upon entering the domain of theCmcmstructure.

Giant Seebeck effect in Ge-doped SnSe

Thermoelectric materials may contribute in the near future as new alternative sources of sustainable energy. Unprecedented thermoelectric properties in p-type SnSe single crystals have been recently reported, accompanied by extremely low thermal conductivity in polycrystalline samples. In order to enhance thermoelectric efficiency through proper tuning of this material we report a full structural characterization and evaluation of the thermoelectric properties of novel Ge-doped SnSe prepared by a straightforward arc-melting method, which yields nanostructured polycrystalline samples. Ge does not dope the system in the sense of donating carriers, yet the electrical properties show a semiconductor behavior with resistivity values higher than that of the parent compound, as a consequence of nanostructuration, whereas the Seebeck coefficient is higher and thermal conductivity lower, favorable to a better ZT figure of merit.

Phase separation enhanced magneto-electric coupling in La0.7Ca0.3MnO3/BaTiO3 ultra-thin films

We study the origin of the magnetoelectric coupling in manganite films on ferroelectric substrates. We find large magnetoelectric coupling in La0.7Ca0.3MnO3/BaTiO3 ultra-thin films in experiments based on the converse magnetoelectric effect. The magnetization changes by around 30-40% upon applying electric fields on the order of 1 kV/cm to the BaTiO3 substrate, corresponding to magnetoelectric coupling constants on the order of α = (2-5) · 10(-7) s/m. Magnetic anisotropy is also affected by the electric field induced strain, resulting in a considerable reduction of coercive fields. We compare the magnetoelectric effect in pre-poled and unpoled BaTiO3 substrates. Polarized neutron reflectometry reveals a two-layer behavior with a depressed magnetic layer of around 30 Å at the interface. Magnetic force microscopy (MFM) shows a granular magnetic structure of the La0.7Ca0.3MnO3. The magnetic granularity of the La0.7Ca0.3MnO3 film and the robust magnetoelastic coupling at the La0.7Ca0.3MnO3/BaTiO3 interface are at the origin of the large magnetoelectric coupling, which is enhanced by phase separation in the manganite.

Effect of interface-induced exchange fields on cuprate-manganite spin switches

We examine the anomalous inverse spin switch behavior in La0.7Ca0.3MnO3(LCMO)/YBa2Cu3O7-δ (YBCO)/LCMO trilayers by combined transport studies and polarized neutron reflectometry. Measuring magnetization profiles and magnetoresistance in an in-plane rotating magnetic field, we prove that, contrary to many accepted theoretical scenarios, the relative orientation between the two LCMO's magnetizations is not sufficient to determine the magnetoresistance. Rather the field dependence of magnetoresistance is explained by the interplay between the applied magnetic field and the (exponential tail of the) induced exchange field in YBCO, the latter originating from the electronic reconstruction at the LCMO/YBCO interfaces.

Magnetite (Fe3O4): a new variant of relaxor multiferroic?

The electric polarization, dielectric permittivity, magnetoelectric effect, heat capacity, magnetization and ac susceptibility of magnetite films and polycrystals were investigated. The electric polarization of magnetite films with saturation values between 4 and 8 μC cm(-2) was found to vanish between 32 and 38 K, but in polycrystals no phase transition was detected in this range by heat capacity. Both types of samples showed magnetoelectric effects at low temperatures below a frequency-dependent crossover. This is interpreted as arising from multiferroic relaxor behavior.

Electronic and magnetic reconstructions in La0.7Sr0.3MnO3/SrTiO3 heterostructures: a case of enhanced interlayer coupling controlled by the interface

We report on the magnetic coupling of La0.7Sr0.3MnO3 layers through SrTiO3 spacers in La0.7Sr0.3MnO3/SrTiO3 epitaxial heterostructures. Combined aberration-corrected microscopy and electron-energy-loss spectroscopy evidence charge transfer to the empty conduction band of the titanate. Ti d electrons interact via superexchange with Mn, giving rise to a Ti magnetic moment as demonstrated by x-ray magnetic circular dichroism. This induced magnetic moment in the SrTiO3 controls the bulk magnetic and transport properties of the superlattices when the titanate layer thickness is below 1 nm.

Single Wall Carbon Nanotubes Filled with Metallocenes: a First Example of Non-Fullerene Peapods

We report the synthesis and analysis of metallocenes (ferrocene, chromocene, ruthenocene, vanadocene, tungstenocene-dihydride) encapsulated in single wall carbon nanotubes (SWNTs). In the case of ferrocene, efficient filling of the SWNTs was accomplished from both the liquid and the vapor phase. The other two metallocenes were filled from the vapor phase. High resolution transmission electron microscopy reveals single molecular chains of metallocenes inside SWNTs. Molecules move under the electron beam in the SWNTs indicating the absence of strong chemical bonds between each other and the SWNT wall. Their movement freezes after short illumination as a result of irradiation damage. Energy dispersive X-ray spectrometry confirms the presence of iron, chromium, ruthenium, vanadium and tungsten.