Baseline micronucleus frequencies and 60Co cytokinesis-block micronucleus assay dose-response curve for biodosimetry in Vietnam

This study aims to establish baseline micronucleus (MN) frequencies from various populations of residents in Vietnam and develop a 60Co dose-response curve for the cytokinesis-block micronucleus (CBMN) assay. Blood samples were exposed in vitro to a 60Co source at a dose rate of 275 mGy per min in a range of 0.1 to 4.0 Gy. MN background frequencies were 4.5 ± 3.2, 7.3 ± 4.6, 7.0 ± 3.8 and 13.1 ± 6.7 in 1000 binucleated (BN) cells for 96 healthy donors, 22 male radiation workers and 12 breast cancer patients, respectively. Blood samples from three healthy donors were used to generate the MN dose-response curve: y = C + (0.0496 ± 0.0069)D + (0.0143 ± 0.0026)D2. This curve was verified through an inter-laboratory comparison (RENEB ILC 2021). Our findings highlight the significance of the CBMN assay as an additional essential tool for biodosimetry in Vietnam.

Unraveling the Mechanism of Alkali Metal Fluoride Post-Treatment of SnO2 for Efficient Planar Perovskite Solar Cells

The facile synthesis and beneficial properties of tin oxide have driven the development of efficient planar perovskite solar cells (PSCs). To increase the PSC performance, alkali salts are used to treat the SnO2 surface to minimize the defect states. However, the underlying mechanism of alkali cations' role in the PSCs needs further exploration. Herein the effect of alkali fluoride salts (KF, RbF, and CsF) on the properties of SnO2 and PSC performance is investigated. The results show different alkali have significant roles depending on their nature. Larger cations Cs+ preferably locate at the SnO2 film surface to passivate surface defects and enhance conductivity, while smaller cations like Rb+ or K+ cations tend to diffuse into the perovskite layer to reduce trap density of the material. The former effect leads to enhanced fill factor while the latter effect increases the open circuit voltage of the device. It is then demonstrated that a dual cation post-treatment of the SnO2 layer with RbF and CsF achieves PSC with a significantly higher power conversion efficiency (PCE) of 21.66% compared to pristine PSC with a PCE of 19.71%. This highlights the significance of defect engineering of SnO2 using selective multiple alkali treatment to improve PSC performance.

RENEB Inter-Laboratory Comparison 2021: The Cytokinesis-Block Micronucleus Assay

The goal of the RENEB inter-laboratory comparison 2021 exercise was to simulate a large-scale radiation accident involving a network of biodosimetry labs. Labs were required to perform their analyses using different biodosimetric assays in triage mode scoring and to rapidly report estimated radiation doses to the organizing institution. This article reports the results obtained with the cytokinesis-block micronucleus assay. Three test samples were exposed to blinded doses of 0, 1.2 and 3.5 Gy X-ray doses (240 kVp, 13 mA, ∼75 keV, 1 Gy/min). These doses belong to 3 triage categories of clinical relevance: a low dose category, for no exposure or exposures inferior to 1 Gy, requiring no direct treatment of subjects; a medium dose category, with doses ranging from 1 to 2 Gy, and a high dose category, after exposure to doses higher than 2 Gy, with the two latter requiring increasing medical attention. After irradiation the test samples (no. 1, no. 2 and no. 3) were sent by the organizing laboratory to 14 centers participating in the micronucleus assay exercise. Laboratories were asked to setup micronucleus cultures and to perform the micronucleus assay in triage mode, scoring 500 binucleated cells manually, or 1,000 binucleated cells in automated/semi-automated mode. One laboratory received no blood samples, but scored pictures from another lab. Based on their calibration curves, laboratories had to provide estimates of the administered doses. The accuracy of the reported dose estimates was further analyzed by the micronucleus assay lead. The micronucleus assay allowed classification of samples in the corresponding clinical triage categories (low, medium, high dose category) in 88% of cases (manual scoring, 88%; semi-automated scoring, 100%; automated scoring, 73%). Agreement between scoring laboratories, assessed by calculating the Fleiss' kappa, was excellent (100%) for semi-automated scoring, good (83%) for manual scoring and poor (53%) for fully automated scoring. Correct classification into triage scoring dose intervals (reference dose ±0.5 Gy for doses ≤2.5 Gy, or reference dose ±1 Gy for doses >2.5 Gy), recommended for triage biodosimetry, was obtained in 79% of cases (manual scoring, 73%; semi-automated scoring, 100%; automated scoring, 67%). The percentage of dose estimates whose 95% confidence intervals included the reference dose was 58% (manual scoring, 48%; semi-automated scoring, 72%; automated scoring, 60%). For the irradiated samples no. 2 and no. 3, a systematic shift towards higher dose estimations was observed. This was also noticed with the other cytogenetic assays in this intercomparison exercise. Accuracy of the rapid triage modality could be maintained when the number of manually scored cells was scaled down to 200 binucleated cells. In conclusion, the micronucleus assay, preferably performed in a semi-automated or manual scoring mode, is a reliable technique to perform rapid biodosimetry analysis in large-scale radiation emergencies.

RENEB Inter-Laboratory Comparison 2021: The Dicentric Chromosome Assay

After large-scale radiation accidents where many individuals are suspected to be exposed to ionizing radiation, biological and physical retrospective dosimetry assays are important tools to aid clinical decision making by categorizing individuals into unexposed/minimally, moderately or highly exposed groups. Quality-controlled inter-laboratory comparisons of simulated accident scenarios are regularly performed in the frame of the European legal association RENEB (Running the European Network of Biological and Physical retrospective Dosimetry) to optimize international networking and emergency readiness in case of large-scale radiation events. In total 33 laboratories from 22 countries around the world participated in the current RENEB inter-laboratory comparison 2021 for the dicentric chromosome assay. Blood was irradiated in vitro with X rays (240 kVp, 13 mA, ∼75 keV, 1 Gy/min) to simulate an acute, homogeneous whole-body exposure. Three blood samples (no. 1: 0 Gy, no. 2: 1.2 Gy, no. 3: 3.5 Gy) were sent to each participant and the task was to culture samples, to prepare slides and to assess radiation doses based on the observed dicentric yields from 50 manually or 150 semi-automatically scored metaphases (triage mode scoring). Approximately two-thirds of the participants applied calibration curves from irradiations with γ rays and about 1/3 from irradiations with X rays with varying energies. The categorization of the samples in clinically relevant groups corresponding to individuals that were unexposed/minimally (0-1 Gy), moderately (1-2 Gy) or highly exposed (>2 Gy) was successfully performed by all participants for sample no. 1 and no. 3 and by ≥74% for sample no. 2. However, while most participants estimated a dose of exactly 0 Gy for the sham-irradiated sample, the precise dose estimates of the samples irradiated with doses >0 Gy were systematically higher than the corresponding reference doses and showed a median deviation of 0.5 Gy (sample no. 2) and 0.95 Gy (sample no. 3) for manual scoring. By converting doses estimated based on γ-ray calibration curves to X-ray doses of a comparable mean photon energy as used in this exercise, the median deviation decreased to 0.27 Gy (sample no. 2) and 0.6 Gy (sample no. 3). The main aim of biological dosimetry in the case of a large-scale event is the categorization of individuals into clinically relevant groups, to aid clinical decision making. This task was successfully performed by all participants for the 0 Gy and 3.5 Gy samples and by 74% (manual scoring) and 80% (semi-automatic scoring) for the 1.2 Gy sample. Due to the accuracy of the dicentric chromosome assay and the high number of participating laboratories, a systematic shift of the dose estimates could be revealed. Differences in radiation quality (X ray vs. γ ray) between the test samples and the applied dose effect curves can partly explain the systematic shift. There might be several additional reasons for the observed bias (e.g., donor effects, transport, experimental conditions or the irradiation setup) and the analysis of these reasons provides great opportunities for future research. The participation of laboratories from countries around the world gave the opportunity to compare the results on an international level.

Spectroscopic Insight into Efficient and Stable Hole Transfer at the Perovskite/Spiro-OMeTAD Interface with Alternative Additives

A stable and efficient carrier transfer is a prerequisite for high-performance perovskite solar cells. With optimized additives, a significantly improved charge carrier transfer can be achieved at the interface of perovskite/2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,90-spirobifluorene (Spiro-OMeTAD) with significantly boosted photostability. Using time-dependent spectroscopic techniques, we investigated charge carrier and mobile-ion dynamics at the perovskite/Spiro-OMeTAD interface, where the Spiro-OMeTAD contains different bis(trifluoromethanesulfonyl)imide (TFSI) salts additives (Li-TFSI, Mg-TFSI₂, Ca-TFSI₂). The pristine response and the dynamic changes under continuous illuminations are presented, which is correlated to the different behaviors of mobile-ion accumulations at the perovskite/Spiro interface and ascribed to the improved hole mobilities in Spiro-OMeTAD, ultimately contributing to the favorable behaviors in solar cells. It is demonstrated that the hole mobility and conductivity of hole transport layers play an important role in suppressing mobile-ion accumulation at the interfaces of solar cells. With the engineering of mixed-cation mixed-halide perovskite, optimal engineering of additives in hole transport materials is an efficient strategy. Therefore, it should be emphasized for accelerating perovskite photovoltaic commercialization.

Strategically Constructed Bilayer Tin (IV) Oxide as Electron Transport Layer Boosts Performance and Reduces Hysteresis in Perovskite Solar Cells

Nanostructured tin (IV) oxide (SnO₂ ) is emerging as an ideal inorganic electron transport layer in n-i-p perovskite devices, due to superior electronic and low-temperature processing properties. However, significant differences in current-voltage performance and hysteresis phenomena arise as a result of the chosen fabrication technique. This indicates enormous scope to optimize the electron transport layer (ETL), however, to date the understanding of the origin of these phenomena is lacking. Reported here is a first comparison of two common SnO₂ ETLs with contrasting performance and hysteresis phenomena, with an experimental strategy to combine the beneficial properties in a bilayer ETL architecture. In doing so, this is demonstrated to eliminate room-temperature hysteresis while simultaneously attaining impressive power conversion efficiency (PCE) greater than 20%. This approach highlights a new way to design custom ETLs using functional thin-film coatings of nanomaterials with optimized characteristics for stable, efficient, perovskite solar cells.

Dimensionality-Controlled Surface Passivation for Enhancing Performance and Stability of Perovskite Solar Cells via Triethylenetetramine Vapor

Perovskite solar cells (PSCs) have achieved unprecedented progress in terms of enhancement of power conversion efficiency (PCE). Nevertheless, device stability is still an obstacle to the commercialization of this emerging photovoltaic technology. Though strategies such as compositional management and ligand engineering have been reported to tackle this critical issue, these methods often have drawbacks such as compromised device performance. Herein, we propose an approach combining material dimensionality control and interfacial passivation by a post-device treatment via triethylenetetramine (TETA) vapor to enhance both efficiency and stability of Cs_0.05FA_0.79MA_0.16PbI_2.5Br_0.5-based PSCs. Results of X-ray diffraction and scanning electron microscopy show the formation of low-dimensional perovskites at the interface between the perovskite film and the hole transporting layer after the TETA vapor treatment. Measurements of the energy level alignment and electrochemical properties by ultraviolet photoelectron spectroscopy and impedance spectra confirm the reduced density of trap states and improved interfacial charge transport. Consequently, TETA-based treatment significantly enhances both efficiency (from 17.07 to 18.03%) and stability (PCE retention from 73.4 to 88.9%) of the PSCs under >65% relative humidity for 1000 h compared to the controlled device without TETA treatment. Furthermore, the TETA vapor also shows an advantageous effect of dramatically improving the performance of PSC devices, which initially had poor performance (from 6.8 to 10.5%) through surface defect passivation.

Interface Engineering to Eliminate Hysteresis of Carbon-Based Planar Heterojunction Perovskite Solar Cells via CuSCN Incorporation

A carbon electrode with low cost and high stability exhibited competitiveness for its practical application in organic-inorganic hybrid perovskite solar cells (PSCs). Nonetheless, issues such as poor interface contact with an adjacent perovskite layer and obvious hysteresis phenomenon are bottlenecks that need to be overcome to make carbon-based PSCs (C-PSCs) more attractive in practice. Herein, we report an effective method to enhance the interfacial charge transport of C-PSCs by introducing the CuSCN material into the device. Two types of CuSCN-assisted devices were studied in this work. One was based on the deposition of an ultrathin CuSCN layer between the perovskite absorber layer and the carbon cathode (PSK/CuSCN/C), and the other was by infiltrating CuSCN solution into the carbon film (PSK/C-CuSCN) by taking advantage of the macroporous structure of the carbon. We have found that the CuSCN incorporation by both methods can effectively address the hysteretic feature in planar C-PSCs. The origin for the hysteresis evolution was unraveled by the investigation of the energy alignment and the kinetics of interfacial charge transfer and hole trap-state density. The results have shown that both types of CuSCN-containing devices showed improved interfacial charge carrier extraction, suppressed carrier recombination, reduced trap-state density, and enhanced charge transport, leading to negligible hysteresis. Furthermore, the CuSCN-incorporated C-PSCs demonstrated enhanced device stability. The power conversion efficiency remained 98 and 91% of the initial performance (13.6 and 13.4%) for PSK/CuSCN/C and PSK/C-CuSCN, respectively, after being stored under a high humidity (75-85%) environment for 10 days. The devices also demonstrated extraordinary long-term stability with a negligible performance drop after being stored in air (relative humidity: 33-35%) for 90 days.

Tuning the Amount of Oxygen Vacancies in Sputter-Deposited SnOx films for Enhancing the Performance of Perovskite Solar Cells

This work demonstrates the effect of oxygen vacancies in SnO_x thin films on the performance of perovskite solar cells. Various SnO_x films with different amounts of oxygen vacancies were deposited by sputtering at different substrate temperatures (25-300 °C). The transmittance of the films decreased from 82 to 66 % with increasing deposition temperature from 25 to 300 °C. Both X-ray photoelectron spectroscopy and electron-spin resonance spectroscopy confirmed that a higher density of oxygen vacancies was created within the SnO_x film at a high substrate temperature, which caused narrowing of the SnO_x bandgap from 4.1 (25 °C) to 3.74 eV (250 °C). Combined ultraviolet photoelectron spectroscopy and UV/Vis spectroscopy showed an excellent conduction band position alignment between the methylammonium lead iodide perovskite layer (3.90 eV) and the SnO_x electron transport layer deposited at 250 °C (3.92 eV). As a result, a significant enhancement of the open-circuit voltage from 0.82 to 1.0 V was achieved, resulting in an increase of the power conversion efficiency of the perovskite solar cells from 11 to 14 %. This research demonstrated a facile approach for controlling the amount of oxygen vacancies in SnO_x thin films to achieve a desirable energy alignment with the perovskite absorber layer for enhanced device performance.

Hindered Formation of Photoinactive δ-FAPbI3 Phase and Hysteresis-Free Mixed-Cation Planar Heterojunction Perovskite Solar Cells with Enhanced Efficiency via Potassium Incorporation

Organic-inorganic hybrid lead halide perovskite solar cells have demonstrated competitive power conversion efficiency over 22%; nevertheless, critical issues such as unsatisfactory device stability, serious current-voltage hysteresis, and formation of photo nonactive perovskite phases are obstacles for commercialization of this photovoltaics technology. Herein we report a facial yet effective method to hinder formation of photoinactive δ-FAPbI₃ and hysteresis behavior in planar heterojunction perovskite solar cells based on K _x(MA_0.17FA_0.83)_{1- x}PbI_2.5Br_0.5 (0≤ x ≤ 0.1) through incorporation of potassium ions (K⁺). X-ray diffraction patterns demonstrate formation of photoinactive δ-FAPbI₃ was almost completely suppressed after K⁺ incorporation. Density functional theory calculation shows K⁺ prefers to enter the interstitial sites of perovskite lattice, leading to chemical environmental change in the crystal structure. Ultrafast transient absorption spectroscopy has revealed that K⁺ incorporation leads to enhanced carrier lifetime by 50%, which is also confirmed by reduced trap-assisted recombination of the perovskite solar cells containing K⁺ in photovoltage decay. Ultraviolet photoelectron spectroscopy illustrates that K⁺ incorporation results in a significant rise of conduction band minimum of the perovskite material by 130 meV, leading to a more favorable energy alignment with electron transporting material. At the optimal content of 3% K⁺ (molar ratio, relative to the total monovalent cations), nearly hysteresis-free, enhanced power conversion efficiencies from 15.72% to 17.23% were obtained in this solar cell.

Integrated Photoelectrolysis of Water Implemented On Organic Metal Halide Perovskite Photoelectrode

Herein we report on integrated photoelectrolysis of water employing organic metal halide (OMH) perovskite material. Generic OMH perovskite material and device architecture are highly susceptible to degradation by moisture and water. We found that decomposition of perovskite devices proceeds by water ingress through pinholes in upper layers and is strongly affected by applied bias/light and electrolyte pH. It was also found that a pinhole-free hole transport layer (HTL) could significantly enhance the stability of the perovskite photoelectrode, thereby extending the photoelectrode lifetime to several tens of minutes, which is an unprecedented record-long operation. Furthermore, a carbon nanotube (CNT)/polymer composite layer was developed that can effectively protect the underlying perovskite layer from electrolyte molecules.

Staging arteriovenous fistula loops for lengthening of free-flap pedicles

The authors investigated the optimal period of maturation following the creation of arteriovenous (AV) loops using polyterafluoroethylene (PTFE) in a white rat model, which were subsequently used to support free-tissue transfer The AV loops in Group 1 (n = 17) were allowed to mature for 3 days prior to creation of the flap, while those from Group 2 (n = 14) were allowed to mature for 5 days. Results were compared to those from a previous study in which the authors reported an 80 percent initial patency rate (n = 30) and a 67 percent viability rate, based on 12 patent loops after 7 days. In the present study, patency rates were 59 percent for the 3-day group and 79 percent for the 5-day group; viability rates were 50 and 64 percent, respectively. Considering both patent and nonpatent loops, the overall viability rates were 29 and 50 percent respectively. Maturation periods longer than 3 days for AV loops constructed from PTFE micrografts were determined to be preferable for subsequent free-tissue transfer.