Digital workflow for prosthetic management of malpositioned implant in an adolescent patient: A 20-year follow-up

OBJECTIVE

Dental implants placed in adolescent patients pose a challenge to restore and maintain an esthetic outcome over longer period of follow-up. Maxillomandibular changes throughout adulthood may lead to complications such as implant infraocclusion and interproximal contact loss. This case report describes an alternate prosthetic treatment strategy for maxillary single implant placed in an adolescent patient in the esthetic zone with inappropriate implant axis and screw hole placement.

CLINICAL CONSIDERATIONS

With temporary restorations, the gingiva and soft tissues were shaped to imitate the emerging profile of the contralateral side. A zirconia screw-retained abutment was customized as a copy-mirror from the contralateral prepared tooth to mimic the exact shape and to avoid labiolingual over contour by computer-aided design/computer-assisted manufacture (CAD/CAM). The porcelain laminate veneer was bonded to the zirconia abutment. Porcelain adhesive approach was used instead of traditional principles of retention and resistance form of the abutment.

CONCLUSIONS

A functional and esthetic outcome was achieved and maintained, while a minimally invasive procedure was implemented to use the malplaced implant instead of explanting it.

CLINICAL SIGNIFICANCE

The present report illustrates the prosthetic management of a malpositioned dental implant placed 20 years ago, utilizing a minimally invasive digital protocol.

Reverse scan body: The scan pattern affects the fit of complete-arch prototype prostheses

PURPOSE

To assess the effect of different scan patterns on the fit of implant-supported complete-arch prototype prostheses fabricated via a complete digital extraoral protocol with a reverse scan body.

MATERIALS AND METHODS

A mandibular cast with four multi-unit abutment (MUA) implant analogs with adequate antero-posterior spread served as the reference cast, simulating a common clinical patient situation, and a polymethylmethacrylate interim screw-retained prosthesis was fabricated on it. Novel reverse scan bodies were connected to the interim prosthesis on the intaglio of the MUA abutments and extraoral scanning was performed with a white light intraoral scanner (TRIOS 4; 3 shape) and three different scan patterns: starting from the occlusal surface of the interim prosthesis (O-group), starting from the intaglio (I-group), and helix pattern (H-group).  The resulting STL files from the three groups were then imported to computer-aided design (CAD) software and after the digital design, the STL files were exported to a computer-aided manufacturing (CAM) milling machine which generated a total of 15 CAD-CAM milled prototype prostheses per group. Two clinicians assessed the fit of each digitally fabricated prototype prosthesis on the reference cast, utilizing the screw-resistance test and radiographic evaluation. Fisher's exact test was used to test the difference between the three groups, and Cohen's k-score was used to assess the inter-examiner agreement.

RESULTS

Out of the three different groups, the O-group scan pattern led to 100% prosthesis fit, while the prototype prostheses generated from I- and H-groups had 80% and 53% fit, respectively. The results were statistically significant (p = 0.008).

CONCLUSIONS

Occlusal scan pattern leads to fitting milled prototype prostheses after extraoral scanning with reverse scan bodies without intraoral implant data acquisition.

Effect of dental implant therapy on the preservation of orofacial tissues: A systematic review and meta-analysis

OBJECTIVE

Fundamentally, this review addresses the following question: In partially or fully edentulous patients, do implant-supported dental prostheses preserve orofacial tissues when compared to conventional prostheses or no therapy?

MATERIALS AND METHODS

This study was conducted according to the 2020 PRISMA guidelines for systematic reviews. Electronic searches were conducted at PubMed and Embase databases followed by manual search. Clinical studies comparing the effect of implant-supported prostheses with conventional rehabilitation or no treatment on alveolar bone resorption, remaining teeth, and jaw muscle thickness were considered for inclusion. A qualitative synthesis was conducted with all included studies, and data from selected studies were pooled quantitatively to perform a meta-analysis.

RESULTS

A total of 14 studies were selected for analysis. Six studies reported on the effect of implant therapy on alveolar bone resorption (n = 453), six on the remaining teeth (n = 1014), while four studies evaluated masseter muscle thickness (n = 158). The results of the meta-analyses assessing alveolar bone resorption in the posterior mandible and in the anterior area of the maxilla, both fixed and random effects models, yielded no benefit of rehabilitation with implant-supported prostheses when compared to conventional prostheses. For masseter bone thickness, however, a significant benefit for implant-supported prosthesis was observed.

CONCLUSIONS

This systematic review and meta-analysis were unable to unequivocally answer the focus question. There are some indicators of the benefit of implant-supported prostheses over conventional prostheses or no therapy in preserving orofacial tissues, particularly for masseter muscle thickness. However, the evidence is still insufficient to confirm such perception.

Group 4 ITI Consensus Report: Patient benefits following implant treatment in partially and fully edentulous patients

OBJECTIVES

The aim of Working Group 4 was to address patient benefits associated with implant dentistry. Focused questions on (a) dental patient-reported outcomes (dPROs), (b) improvement in orofacial function, and (c) preservation of orofacial tissues in partially and fully edentulous patients following provision of implant-retained/supported dental prostheses were addressed.

MATERIALS AND METHODS

Three systematic reviews formed the basis for discussion. Participants developed statements and recommendations determined by group consensus based on the findings of the systematic reviews. These were then presented and accepted following further discussion and modifications as required by the plenary of the 7th ITI Consensus Conference, taking place in 2023 in Lisbon, Portugal.

RESULTS

Edentulous patients wearing complete dentures (CD) experience substantial improvements in overall dPROs and orofacial function following treatment with either complete implant-supported fixed dental prostheses (CIFDP) or implant overdentures (IODs). With respect to dPROs, mandibular IODs retained by two implants are superior to IODs retained by one implant. However, increasing the number of implants beyond two, does not further improve dPROs. In fully edentulous patients, rehabilitation with CIFDP or IOD is recommended to benefit the preservation of alveolar bone and masseter muscle thickness.

CONCLUSIONS

Completely edentulous patients benefit substantially when at least the mandible is restored using an CIFDP or an IOD compared to CD. In fully edentulous patients, implant prostheses are the best option for tooth replacement. The availability of this treatment modality should be actively promoted in all edentulous communities, including those with limited access and means.

The Reverse Scan Body Protocol: Completing the Digital Workflow

Recently developed extraoral techniques have allowed for an alternative approach for the digital acquisition of implant positions in fully edentulous patients. The "reverse scan body protocol" digitally simulates the traditional back-pouring technique long utilized in analog workflows. This article presents two cases in which an extraoral scanning technique was used to capture implant positions, design a prototype, and fabricate the definitive monolithic zirconia full-arch prosthesis.

Accuracy of static computer-aided implant surgery (S-CAIS) using CAD-CAM surgical templates fabricated from different additive manufacturing technologies

STATEMENT OF PROBLEM

Different 3D printers are available for guided implant surgery, but studies that evaluate their source of errors and their cost-effectiveness are lacking.

PURPOSE

The purpose of this in vitro study was to compare the accuracy of different 3-dimensional (3D) printed surgical templates made using different additive manufacturing technologies and to evaluate the effect of implant location on the accuracy of fully guided implant placement.

MATERIAL AND METHODS

Fifty partially edentulous maxillary typodonts with edentulous sites in the right second premolar (SP), right lateral incisor (LI), left central incisor (CI), and left first molar (FM) locations were scanned and printed from the standard tessellation language (STL) datasets. The study compared 5 groups for the fabrication of implant surgical templates: Varseo S-Bego (Bego), Polyjet-Stratasys (Poly), Low Force Stereolithography-FormLabs (LFS), P30+-Straumann (P30), and M2-Carbon (M2). After fully guided implant placement, the typodont was scanned, and the 3D implant positions were compared with the master model by superimposing the STL files. Descriptive statistics were calculated for groups and subgroups, and comparisons among the groups and subgroups were conducted via 2-way mixed analysis of variance, Tukey honest significant difference, and post hoc Bonferroni tests (α=.05).

RESULTS

The results were site specific and not consistent within each group. For angle deviation, the within-group analysis for P30 demonstrated significantly lower values for implants positioned at site SP (1.4 ±0.8 degrees) than for sites LI (2.3 ±0.7 degrees; P=.001) and CI (2.3 ±0.8 degrees; P=.007). For 3D offset at base for implant CI, LFS was significantly higher than Bego (P=.002), Poly (P=.035), or M2 (P=.001); P30 was also significantly higher than Bego (P=.014) and M2 (P=.006). LFS had a significantly higher 3D offset at the tip than Bego (P=.001) and M2 (P=.022) for implant CI.

CONCLUSIONS

The choice of 3D printer seemed to influence fully guided implant surgery in terms of the final implant position compared with initial implant planning. However, although statistically significant differences were present across groups, all additive manufacturing technologies were within clinically acceptable values.

Survival rates, patient satisfaction, and prosthetic complications of implant fixed complete dental prostheses: a 12-month prospective study

PURPOSE

To determine the survival rate, incidence of prosthetic complications, and patient satisfaction of implant fixed complete dental prostheses (IFCDPs) after a mean observation period of 1.4 years.

MATERIALS AND METHODS

Twenty-eight (28) eligible participants were recruited according to specific inclusion and exclusion criteria. The definitive metal-acrylic resin IFCDPs consisted of titanium bars veneered with acrylic resin and acrylic denture teeth. Prosthodontic complications, divided into major and minor, were monitored. Parameters such as gender, jaw location, bruxism, and occlusal scheme were evaluated. Moreover, a questionnaire was administered throughout the study to assess patient satisfaction. Poisson regression as well as repeated measures ANOVA were used for statistical analysis.

RESULTS

Fourteen (14) males and 14 females were enrolled and followed-up at 3, 6, and 12 months. All IFCDPs survived (100% survival rate). The most frequent minor complication was the loss of material used to close the screw access hole (20% out of total complications). The most frequent major complication was chipping of the acrylic denture teeth (77.14% out of total complications). Gender (p = 0.008) and bruxism (p = 0.030) were significant predictors for the total major complications (major wear and major chipping) while occlusal scheme was a significant predictor for major chipping events (p = 0.030).

CONCLUSIONS

While IFCDPs demonstrated high prosthetic survival rates, they also exhibited a high number of chipping events of the acrylic veneering material, especially in males, bruxers, and individuals with canine guidance occlusion. However, the occurrence of these prosthetic complications did not negatively affect patient satisfaction.

Effect of supramucosal height of a scan body and implant angulation on the accuracy of intraoral scanning: An in vitro study

STATEMENT OF PROBLEM

Intraoral scanners (IOSs) provide a digital alternative to conventional implant impression techniques. However, the effect of the supramucosal height of the scan body and implant angulation on the accuracy of IOSs remains unclear.

PURPOSE

The purpose of this in vitro study was to measure the impact of the supramucosal height of the scan body and implant angulation on the accuracy (trueness and precision) of intraoral digital implant scans in partially edentulous models.

MATERIAL AND METHODS

Two maxillary partially edentulous casts with 4 implant analogs were fabricated, 1 with 4 parallel implants (P-groups) and 1 with 2 implants distally inclined 18 degrees (A-groups). An implant scan body was positioned on each implant analog (CARES RC Mono Scanbody). For each cast, 3 subgroups were determined based on the soft tissue moulage fabricated for each reference cast exposing 3 mm (P-3 and A-3 subgroups), 5 mm (P-5 and A-5 subgroups), and 7 mm (P-7 and A-7 subgroups) of the implant scan bodies. The 2 reference casts were registered by using a coordinate measurement machine and desktop scanner (7 Series Dental Wings) and then scanned using an IOS (TRIOS 4) (n=15). Linear and angular discrepancy values and root mean square (RMS) error values between the implant scan bodies measured on the reference and experimental scans were computed with an inspection software program (Geomagic). Mann-Whitney U tests with Bonferroni correction were applied for planned comparisons (α=.05/9 ≈ .006).

RESULTS

For linear discrepancies, statistically significant differences were found between groups P-3 and A-3 (P=.004) and between P-7 and A-7 (P=.005). For angular discrepancies, statistically significant differences were found between groups A-3 and A-5 (P=.002) and between P-7 and A-7 (P=.003). The RMS error analysis found no statistically significant differences among the groups.

CONCLUSIONS

Implant angulation of 18 degrees did not significantly affect the accuracy of the intraoral scans in terms of 6 of the 9 planned comparisons, although the angled groups had lower mean values. Also, the supramucosal height of the scan body did not significantly affect the accuracy of the intraoral scans in terms of 17 of the 18 planned comparisons. Results may vary with different implant scan body designs.

Reverse scan body: A complete digital workflow for prosthesis prototype fabrication

PURPOSE

To assess the accuracy of fit of prosthesis prototypes fabricated via a complete digital workflow protocol with a reverse scan body skipping intraoral scanning for implant data acquisition.

MATERIALS AND METHODS

A maxillary stone cast with four multiunit abutment implant analogs (Screw-Retained Abutments, Institut Straumann AG, Basel, Switzerland) with adequate anteroposterior spread simulated a common clinical patient situation. This stone cast served as the master cast and an interim screw-retained prosthesis was fabricated on it. Novel reverse scan bodies were connected to the interim prosthesis, and extraoral scanning was performed with a white light intraoral scanner. The produced standard tessellation language (STL) files were then imported to computer-assisted design software and after the digital design, the STL file was exported to a computer-assisted machining milling machine and a three-dimensional (3D) printer to produce a total of 50 milled and 50 printed fixed complete denture prototypes, respectively. Two clinicians assessed the accuracy of fit of each digitally fabricated prosthesis prototype on the master cast, utilizing the screw-resistance test and radiographic evaluation. Out of the 100 prototypes, 94% (94/100) were fitting accurately. Fisher's exact test was used to test the difference among the groups. The test revealed statistically significant results (p = 0.027).

RESULTS

Out of the 50 digitally fabricated milled prosthesis prototypes, 50 (100%) presented with accurate fit under in vitro assessment. Out of the 50 digitally fabricated 3D printed prototypes, 44 (88%) presented with accurate fit under in vitro assessment.

CONCLUSIONS

Accurately fitting digitally fabricated prosthesis prototypes can be milled after extraoral scanning with reverse scan bodies without intraoral implant data acquisition.

Complete Digital Workflow for Prosthesis Prototype Fabrication with Double Digital Scanning: Accuracy of Fit Assessment

PURPOSE

To assess the accuracy of a complete digital workflow protocol for fabrication of printed prosthesis prototypes for maxillary immediate loading treatment.

MATERIALS AND METHODS

A maxillary stone cast with 4 abutment-level implant analogs with adequate antero-posterior spread was fabricated. This stone cast served as a reference cast and a zirconia prosthesis was also fabricated to serve as an interim prosthesis. Double digital scanning was used for digital scans of the reference cast and the interim prosthesis, respectively. An intraoral scanner (TRIOS^® 3) was used to capture the standard tessellation language (STL) files. These STL files were then imported to computer-aided design (CAD) software (Exocad DentalCAD) and superimposed into a final design STL file that was exported to 3 different (Form 3b+, Carbon M2, Sprintray Pro95) three-dimensional (3D) printers to produce a total of 90 printed prototypes (n = 30 from each 3D printer). Two blinded clinicians assessed the accuracy of fit of each digitally fabricated prosthesis prototype on the reference cast, utilizing the screw-resistance test and radiographs. The Fisher's exact test was used to test the difference between the groups.

RESULTS

Out of the 90 digitally fabricated prototypes, 86 (95.6%) presented with accurate fit. The accuracy of fit ranged from 87% (26/30) for Sprintray Pro95 to 100% (30/30) for the Form 3b+ and M2 Carbon groups.

CONCLUSIONS

Digitally fabricated prosthesis prototypes can be generated with a complete digital workflow leading to clinically acceptable fit, while reducing the number of appointments and treatment time. The 3D printer had an effect on the accuracy of prosthesis prototype fit.

Complete digital workflow for prosthesis prototype fabrication with double digital scanning: A retrospective study with 45 edentulous jaws

PURPOSE

To assess the accuracy of fit of complete-arch printed prosthesis prototypes generated with a digital workflow protocol for completely edentulous jaws.

MATERIALS AND METHODS

Forty-five edentulous jaws (35 patients) underwent intraoral complete-arch digital scans with the double digital scanning (DDS) technique and the generated standard tessellation language (STL) files were superimposed and imported into computer-aided design software. After STL merging, each master STL file was used for printing a prosthesis prototype. The primary outcome was the accuracy of fit assessment of the printed prototypes on verified master stone casts. Two experienced clinicians tested the accuracy of fit with radiographs and screw-resistance tests. Secondary outcomes were the effect of the scan body shape and implant number on the accuracy of fit.

RESULTS

Out of the 45 DDS-generated prosthesis prototypes, 39 presented with accurate fit on verified master stone casts, yielding an 86.70% accuracy of fit. Cylindrical scan bodies led to 100% accuracy of fit (25/25), whereas polygonal scan bodies presented with 70% accuracy of fit (14/20). Four implant-supported prostheses yielded 100% accuracy of fit (12/12), compared with 25/29 (86.30%) accuracy of fit for the six-implant-supported ones. Fisher's exact test was used to assess the effect of different scan body shapes (p = 0.005) and implant number on accuracy of fit. Chi-squared test was used to assess the association between the number of implants per arch and the accuracy of fit (p = 0.039).

CONCLUSIONS

Thirty-nine out of 45 complete-arch prosthesis prototypes generated with a completely digital workflow presented with clinically acceptable fit. The effect of the scan body design and implant number was statistically significant, favoring cylindrical scan bodies and four-implant-supported prostheses.

Complete Digital Workflow for Prosthesis Prototype Fabrication with the Double Digital Scanning (DDS) Technique: A Prospective Study on 16 Edentulous Maxillae

PURPOSE

To assess the accuracy of fit of milled prosthesis prototypes for completely edentulous patients using a digital workflow.

MATERIALS AND METHODS

Sixteen patients received intraoral full-arch digital scans with the double digital scanning (DDS) technique and the generated standard tessellation language (STL) files were superimposed and imported into computer-aided design software (Exocad DentalCAD, exocad GmbH, Darmstadt, Germany) for design. After the design, each master STL file was used for computer-aided manufacturing of the prosthesis prototypes through a complete digital workflow. The primary outcome was the accuracy of fit assessment of the digitally fabricated prototypes on verified patient master stone casts. Two blinded clinicians tested the accuracy of fit of the milled prosthesis prototypes on the verified master stone casts utilizing the screw-resistance test and direct observation.

RESULTS

Out of the 16 digitally fabricated prototypes from intraoral full-arch digital scans, all 16 presented with an accurate fit on verified master stone casts.

CONCLUSIONS

Digitally fabricated full-arch prosthesis prototypes can be generated with a complete digital workflow leading to clinically acceptable fit.

Screw-Retained Surgical Guide for Implant Placement in Terminal Dentition Patients With Existing Implants

For patients with existing implants in need of additional implant placement, the use of the existing implants for guide fixation seems to be a logical alternative. Current options for the fabrication of surgical guides involve creating surgical guides that are mucosa-borne and/or retained by fixation pins. Since these existing techniques involve inherent inaccuracies, the fabrication of surgical guides that are screw-retained at the implant- or abutment-level would eliminate the introduction of those same fundamental inaccuracies. The purpose of the present technical report is to illustrate a step-by-step digitally planned guided implant placement protocol for terminal dentition patients with salvageable existing implants requiring full-arch implant rehabilitation. The advantages of this protocol include enhancing the accuracy of guided implant placement with screw-retention vs the traditional mucosa- or fixation pin support. Thus, this simplifies the transition from failing teeth to implants by ensuring that fixed provisionalization serves both functional and esthetic requirements. This protocol can also predictably reduce chairside time and adjustments at the surgical implant placement appointment. This article is protected by copyright. All rights reserved.

Digital VS Conventional Full-Arch Implant Impressions: A Retrospective Analysis of 36 Edentulous Jaws

PURPOSE

There is a paucity of comparative clinical studies assessing the accuracy of full-arch digital versus conventional implant impressions. The aim of this retrospective study was to compare the three-dimensional (3D) deviations between full-arch digital and conventional implant impressions for edentulous maxillae and mandibles.

MATERIALS AND METHODS

Twenty-seven patients (36 edentulous jaws) were treated with one-piece, screw-retained implant-supported fixed complete dental prostheses (IFCDPs). Twenty-one jaws were maxillary, and 15 were mandibular. Full-arch conventional impressions and intraoral digital scans with scan bodies and an intraoral scanner had been taken during the impression phase. Following verification of the conventional stone casts, the casts were digitized. The generated standard tessellation language (STL) files from both impression techniques were merged and analyzed with reverse engineering software. The primary aim was to evaluate the accuracy between conventional and digital full-arch scans, while the effect of the edentulous jaw in 3D accuracy was the secondary aim.

RESULTS

The cumulative 3D (mean ±SD) deviations between virtual casts from intraoral full-arch digital scans and digitized stone casts generated from conventional implant impressions were found to be 88 ±24 μm. In the maxillary group, the mean ±SD 3D deviation was 85 ±25 μm, compared to 92 ±23 μm for the mandibular group (P = .444).

CONCLUSION

The 3D implant deviations found between the full-arch digital and conventional impressions lie within the clinically acceptable threshold. No statistically significant difference was identified between maxillary and mandibular jaws in terms of 3D deviations. This article is protected by copyright. All rights reserved.

Digital Workflow in Implant Treatment Planning For Terminal Dentition Patients

Treatment planning for the transition of patients from terminal dentition to full-arch implant rehabilitation poses challenges. Such challenges pertain to achieving the new orientation of the occlusal and esthetic plane as well as the change of vertical dimension of occlusion (VDO), while the fixed provisionalization using a digital workflow, still tends to be considered complex and hard to perform. This article illustrates step-by-step the utilization of a digital workflow protocol in the treatment planning for rehabilitation of terminal dentition patients, simplifying the smile design and ensuring that fixed provisionalization serves both the functional and esthetic requirements. This protocol includes facially-driven, three-dimensional (3D) digital smile design and chairside mock-up restoration workflows that enable prosthetically-driven assessment prior to implant treatment planning and 3D printing of surgical templates, which can predictably reduce chairside time and adjustments at the surgical and fixed provisionalization appointment. This article is protected by copyright. All rights reserved.

Accuracy of Different Surgical Guide Designs for Static Computer-Assisted Implant Surgery: An in vitro Study

The aims of this study were to evaluate the effect of (i) the different surgical guide designs and (ii) implant placement location on the accuracy of fully guided implant placement in single edentulous sites using an in vitro study model. Forty-five partially edentulous models were scanned and divided into three groups: group 1, tooth-supported full-arch surgical guide; group 2, three different tooth-supported shortened surgical guides (SSGs); and group 3, tooth-supported full-arch surgical guide with a crossbar. All surgical guides were printed and used for fully guided implant placement. A total of 180 implants (60 per group) were placed, and scanbodies were positioned on all models, and postoperative surface scan files (STL) files were obtained. Superimposition of preoperative and postoperative STL files was performed, and the accuracy of implant position was evaluated. The interaction between group and implant location was statistically significant for angle, 3D offset at the base, and at the tip (p<0.001). The post-hoc tests showed a statistically significantly higher deviation for group 2 compared to group 3 for all outcomes for implants #4 (p<0.05) and #7 (p<0.05). There was also a statistically significant difference in all outcomes between groups 1 and 3 for implant #7 (p<0.05). All surgical guide designs presented satisfactory performance with clinically acceptable levels of deviation. However, SSGs presented higher accuracy for guided implant placement in a single-edentulous site, whereas a full-arch surgical guide with a crossbar presented superior outcomes when two or more guided implants were placed simultaneously.

A comparative retrospective study of different surgical guide designs for static computer-assisted implant surgery in posterior single edentulous sites

AIM

The aim of this retrospective clinical study was to compare the accuracy of static Computer-assisted implant surgery (sCAIS) in posterior single edentulous patients using different surgical guide designs.

MATERIALS AND METHODS

Thirty-seven partially edentulous patients with a total of 54 implants were included in the study. Seventeen implants were included in Group 1-Unbounded Tooth-Mucosa Supported; 18 implants in Group 2-Unbounded Tooth Supported; and 19 implants in Group 3 (Control)-Bounded Tooth Supported. All partially edentulous patients were treated with fully guided implant surgery using the corresponding surgical guide. Discrepancies between the pre-planned and post-operative implant position were evaluated.

RESULTS

The mean angular deviation ± standard deviation (SD) was 2.91 ± 1.56°, 3.33 ± 1.72° and 2.25 ± 1.13° for Groups 1, 2, and 3, respectively. The mean ± SD 3D offset at base was 0.66 ± 0.29 mm, 0.77 ± 0.24 mm, and 0.49 ± 0.22 mm; and 3D offset at tip was 0.84 ± 0.45 mm, 1.07 ± 0.38 mm, and 0.75 ± 0.25 mm for Groups 1, 2, and 3, respectively. No statistically significant differences between groups were found for angular deviation. There were statistically significant differences between Groups 2 and 3 for 3D offset at base (p = .002) and 3D offset at tip (p = .010).

CONCLUSIONS

Different surgical guide designs for posterior single edentulous areas appear to be associated with the accuracy level of sCAIS. In unbounded sites, having additional posterior attached soft tissue support is preferable.

Digital Workflow for Double Complete Arch Zirconia Prostheses Utilizing a Novel Scan Body

The purpose of this clinical report is to present a complete digital workflow for the fabrication of complete arch fixed zirconia implant restorations. An intraoral scanner was used to capture the implants' position at the abutment level and also the patient's existing interim prostheses with the double digital scanning technique. A novel scan body and impression pin were utilized throughout the scanning process which allowed for the accurate and reproducible superimposition of the generated Standard Tesselation Language (STL) files. Prosthesis prototypes were digitally designed and fabricated, tried in, and verified intraorally. The definitive zirconia prostheses were then fabricated and delivered to the patient. This technique can be utilized in both arches overcoming the absence of stable intraoral landmarks for superimposition of STL files.

Digitally Designed and Milled Verification Jigs Generated from Photogrammetry Data Acquisition: A Clinical Report

The objective of the present report is to illustrate a proof-of-concept protocol for CAD/CAM fabrication of milled verification jigs during full-arch implant rehabilitation using photogrammetry for data acquisition. The present report aims to bridge the gap between analog and digital workflows by introducing a CAD/CAM technique to intraorally verify digitally acquired information without the use of the technique-sensitive and labor-intensive conventional resin verification jig. One patient was treated with a digital prosthodontic protocol where a digitally designed CAD/CAM milled verification jig (generated from intraoral digital scans) was used to confirm implant 3D positioning prior to the fabrication of double full-arch monolithic definitive zirconia prostheses. The procedures are presented step-by-step after clinical and radiographic observation.

Complete Digital Workflow for Mandibular Full-Arch Implant Rehabilitation in 3 Appointments

The aim of this clinical report is to describe a complete digital workflow protocol for mandibular full-arch implant rehabilitation from guided surgery to definitive prosthesis in only 3 appointments. This expedited protocol allows for guided implant placement with a system of stackable surgical templates and CAD/CAM prosthodontic rehabilitation using a digital workflow. At the first appointment, a guided implant placement protocol with the stackable template concept was done followed by immediate loading with a prefabricated interim prosthesis. At the same appointment, the Double Digital Scanning (DDS) technique was used for scanning, maxillomandibular relationship registration and virtual articulation. The anchor pins from guided surgery were used as fiducial markers for DDS data superimposition. At the second appointment, the prosthesis prototype was tried-in and adjustments were made. At the third appointment, the definitive monolithic zirconia full-arch prosthesis was delivered.

Accuracy of 3D Printed Implant Casts Versus Stone Casts: A Comparative Study in the Anterior Maxilla

PURPOSE

To conduct an in vitro comparison of the amount of three-dimensional (3D) deviation of 3D printed casts generated from digital implant impressions with an intraoral scanner (IOS) to stone casts made of conventional impressions.

MATERIAL AND METHODS

A maxillary master cast with partially edentulous anterior area was fabricated with two internal connection implants (Regular CrossFit, Straumann). Stone casts (n = 10) that served as a control were fabricated with the splinted open-tray impression technique. Twenty digital impressions were made using a white light IOS (TRIOS, 3shape) and the Standard Tesselation Language (STL) files obtained were saved. Based on the STL files, a digital light processing (DLP) and a stereolithographic (SLA) 3D printer (Varseo S and Form 2) were used to print casts (n = 10 from each 3D printer). The master cast and all casts generated from each group were digitized using the same IOS. The STL files obtained were superimposed on the master cast STL file (reference) to evaluate the amount of 3D deviation with inspection software using the root mean square value (RMS). The independent-samples Kruskal-Wallis test and Dunn's test with Bonferroni correction (for post hoc comparisons) were used for statistical analyses.

RESULTS

The Varseo S group had the lowest median RMS value [77.5 µm (IQR = 91.4-135.4)], followed closely by the Conventional group [77.7 µm (IQR = 61.5-93.4)]. The Form 2 had the highest mean value [98.8 µm (IQR = 57.6-87.9)]. The independent-samples Kruskal-Wallis test revealed a significant difference between the groups (p = 0.018). Post hoc testing revealed a significant difference between Varseo S and Form 2 (p = 0.009).

CONCLUSION

The casts generated from the Varseo S 3D printer had better 3D accuracy than did those from the Form 2 3D printer. Both the Varseo S group and the conventional stone casts groups had similar 3D accuracy.

Digital Workflow With a Triple Scanning Technique for Implant Rehabilitation in the Esthetic Zone

This article describes the case of a partially edentulous patient who had undergone template-guided implant placement and was treated using a triple digital scanning protocol that allowed for CAD/CAM prosthodontic rehabilitation in a complete digital workflow. At the impression appointment, the provisional implant-supported screw-retained prosthesis was digitally scanned both intraorally (first scan) and, after removal, extraorally (second scan). After the second scan, scan bodies were placed intraorally and an implant-level digital impression was taken (third scan). The three standard tessellation language (STL) files derived from the three digital scans were imported in a CAD software and superimposed into one file that contained all of the information from the implant 3D position, prosthesis contours, and transmucosal part of the peri-implant soft tissues. The superimposition of the three STL files led to one master file to serve as a blueprint for the definitive prosthesis. The definitive monolithic zirconia prosthesis was CAM copy-milled, externally stained, and inserted. The patient was satisfied with both the esthetic and functional outcome and the minimally invasive, time-efficient, two-visit restorative protocol. In summary, this case report illustrates a technique for a complete digital workflow in an implant rehabilitation for the replacement of multiple missing teeth in the esthetic zone in two visits.

A combined analog and digital workflow for retrofitting a monolithic ceramic crown to an existing removable partial denture

A clinical and laboratory workflow for fabricating and retrofitting a monolithic ceramic crown to an existing removable partial denture (RPD) is described. A conventional polyvinyl siloxane impression was made of the prepared tooth with the RPD in place. A stone cast was poured and, after die sectioning, scanned with a tabletop scanner. The ceramic crown was designed and fabricated by using a digital workflow to fit the RPD clasp assembly, providing an adequate undercut for the clasp. The crown was then delivered and the RPD evaluated for adequate fit.

Peri-Implant Diseases and Biologic Complications at Implant-Supported Fixed Dental Prostheses in Partially Edentulous Patients

PURPOSE

This is a single center, retrospective study to assess the prevalence of peri-implant disease and biologic complications in a cohort of partially edentulous subjects in relation to selected prosthetic factors.

MATERIALS AND METHODS

Subjects previously treated with one or more implant-supported fixed dental prosthesis (ISFDPs) were recalled for a comprehensive examination. Clinical and radiographic records were taken and questionnaires were administered. The prevalence of implant failure, peri-implant disease and other biologic complications were correlated with selected prosthetic, clinical and patient-related factors using chi-square and multiple regression analyses.

RESULTS

A convenience sample of 71 subjects with 100 prostheses supported by 222 dental implants were enrolled in the study. The mean follow-up time after prosthesis delivery was 3.3 ± 1.5 years (range of 1-9 years). The cumulative implant survival rate was 99.1%. Peri-implantitis was the most frequent major biologic complication (5% of implants), while the most frequent minor biologic complication was peri-implant mucositis (84.10% of implants). A diagnosis of peri-implant mucositis was more likely associated with cement-retained prostheses compared to screw-retained prostheses (OR 6.8, 95% CI 1.1-78.6, p = 0.045) and for short-span prostheses (≤3 prosthetic units) (OR 2.3, 95% CI 1.1-5.0, p = 0.034). Subject-reported quality of life measures were high regardless of the existence of major and/or minor complications, but decreased with increasing number of minor and total biologic complications.

CONCLUSIONS

Peri-implant mucositis and other minor biologic complications were highly prevalent. The distribution of the observed complications differed based on the method of prosthesis retention and the number of prosthetic units replaced.

Prosthesis Survival Rates and Prosthetic Complications of Implant-Supported Fixed Dental Prostheses in Partially Edentulous Patients

PURPOSE

To determine the prevalence and distribution of prosthetic complications affecting implant-supported fixed dental prostheses (ISFDPs).

MATERIALS AND METHODS

Subjects previously treated with one or more ISFDP(s) were identified from an electronic health record search and recalled for comprehensive clinical examination. Past prosthesis failures and complications were identified from the patient records while any existing complications, not previously recorded, were assessed during examination. ISFDP survival and failure rates were calculated with Kaplan-Meier curves and life table analysis, while regression Poisson analysis was used to identify associations between outcomes and possible patient- and prosthesis-based risk factors.

RESULTS

Seventy-four subjects with 107 ISFDPs were enrolled in the study with a mean time between prosthesis delivery and exam of 3.14 years (range: 1.00-9.00 years). Four prostheses failed, resulting in a cumulative prosthesis survival rate of 96.26%. Prosthetic complications affected 48.59% of ISFDPs, the majority (94.87%) of them minor complications. Only the use of a nightguard was associated with a lower prevalence of prosthetic screw loosening (HR 0.11, 95% CI 0.02-0.59, p = 0.007) while no outcome differences were noted for other variables. Patient satisfaction was high regardless of presence or number of complications.

CONCLUSIONS

ISFDPs demonstrated a high survival rate and overall high, patient-reported satisfaction. Minor prosthetic complications were common but were only significantly associated with nightguard use.

Randomized clinical trial of a conventional and a digital workflow for the fabrication of interim crowns: An evaluation of treatment efficiency, fit, and the effect of clinician experience

STATEMENT OF PROBLEM

Limited information is available regarding the fabrication of tooth-supported interim single crowns (SCs) with either a digital or a conventional workflow.

PURPOSE

The purpose of this randomized clinical trial was to compare the time efficiency and fit of interim crowns fabricated by using either a digital or a conventional workflow.

MATERIAL AND METHODS

Forty participants in need of posterior tooth-supported SCs were enrolled and randomly allocated to either the digital or conventional group. In the digital group, the interim SCs were fabricated by using digital sextant scans and computer-aided design and computer-aided manufacturing (CAD-CAM) technology without definitive casts. The conventional group included conventional impressions and direct fabrication of the interim restorations intraorally. Five experienced and 5 less experienced clinicians were randomly assigned to fabricate the interim SCs. The total fabrication time (laboratory and clinical) was recorded for time efficiency. The fit assessment included marginal fit, proximal contact, occlusal contact, and crown morphology. The evaluated parameters were analyzed with the Mann-Whitney U Test (α=.05).

RESULTS

The digital workflow required significantly less total fabrication time (laboratory and clinical) than the conventional workflow (P<.001). The less-experienced clinicians needed longer clinical time with the conventional workflow than the experienced ones (P=.023). In contrast, the laboratory time and total fabrication time were shorter for less-experienced clinicians using the digital workflow (P=.005 and P=.015). The interim SCs fabricated with the digital workflow had significantly better fit and occlusal contacts than those fabricated with the conventional workflow (P=.005 and P<.001). With the digital workflow, the interim SCs made by less-experienced clinicians were of the same quality as those made by experienced clinicians. When using the conventional workflow, the fit of the experienced clinicians was significantly better than that of the less-experienced clinicians.

CONCLUSIONS

The interim SCs fabricated with a digital workflow required a shorter fabrication time and resulted in better fit than those fabricated with a conventional workflow, especially for less-experienced clinicians.

Survival rates and prosthetic complications of implant fixed complete dental prostheses: An up to 5-year retrospective study

STATEMENT OF PROBLEM

Implant fixed complete dental prostheses (IFCDPs) are widely used in the rehabilitation of completely edentulous patients, yet limited information is available on the relationship between prosthetic complications and patient-associated and prosthesis-associated risk factors.

PURPOSE

The purpose of this retrospective study was to assess the prosthetic complication and survival rates of IFCDPs after a mean observational period of 3.5 years.

MATERIAL AND METHODS

Eligible participants were identified by an electronic health record review. The study consisted of a review of the dental record and a single-visit study appointment when a comprehensive examination was performed, including a review of the medical and dental history, clinical and radiographic examination, intraoral photographs, patient satisfaction questionnaire, and occlusal analysis. Prosthodontic parameters and risk factors were assessed, including time with the prosthesis in place, bruxism, occlusal device use, prosthesis material, number of implants, cantilever length, and mode of prosthesis retention. Association between these prosthodontic parameters and risk factors and the observed prosthetic complications was assessed.

RESULTS

A total of 37 participants (mean age 62.35 ±10.39 years) with 48 IFCDPs were included. Thirty-eight prostheses were metal-acrylic resin (MR group), whereas 10 were metal-ceramic (MC group). Five of the 48 prostheses failed during the follow-up period, a cumulative prosthesis survival rate of 88%. Minor complications were more frequent than major complications. The most frequent minor complication was loss of screw access hole material (5.18%/year), whereas the most frequently observed major complication was major wear of the prosthetic material (5.85%/year). A significant association was found between not wearing an occlusal device and minor chipping, loss of access hole material, and framework fracture. Minor chipping was significantly associated with bruxism, whereas the opposing dentition significantly affected the total number of prosthetic complications.

CONCLUSIONS

High survival rates were observed with both MR and MC IFCDPs. No significant difference was found between MR and MC groups in terms of patient satisfaction, as well as total number of prosthetic complications.

Digital workflow: In vitro accuracy of 3D printed casts generated from complete-arch digital implant scans

STATEMENT OF PROBLEM

Data on the accuracy of printed casts from complete-arch digital implant scans are lacking.

PURPOSE

The purpose of this in vitro study was to compare the 3D accuracy of printed casts from a complete-arch digital implant intraoral scan with stone casts from conventional impressions.

MATERIAL AND METHODS

An edentulous mandibular cast with 4 multiunit abutments with adequate anteroposterior spread was used as the master cast. Digital scans (n=25) were made by using a white light intraoral scanner (IOS). The generated standard tessellation language (STL) data sets were imported into a computer-assisted design (CAD) software program to generate complete-arch implant casts through 3D printing technology. The 25 printed casts and the mandibular master cast were further digitized by using a laboratory reference scanner (Activity 880; Smart Optics). These STL data sets were superimposed on the digitized master cast in a metrology software program (Geomagic Control X) for virtual analysis. The root mean square (RMS) error and the average offset were measured.

RESULTS

When compared with the master cast, the printed casts had a mean ±standard deviation RMS error of 59 ±16 μm (95% CI: 53, 66). The maximum RMS error reached 98 μm. The average offsets were all negative, with a significant difference compared with zero (P<.001).

CONCLUSIONS

The implant 3D deviations of the printed casts from complete-arch digital scans had statistically significant differences compared with those of the master cast but may still be within the acceptable range for clinical application.

Technical Complications and Prosthesis Survival Rates with Implant-Supported Fixed Complete Dental Prostheses: A Retrospective Study with 1- to 12-Year Follow-Up

PURPOSE

To report the rate of technical complications and prosthesis survival in a cohort of edentulous patients treated with implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of at least 1 year.

MATERIALS AND METHODS

The single-visit examination included clinical and radiographic assessment, occlusal analysis, photographs and questionnaire assessing patient satisfaction in a cohort of 52 patients rehabilitated with 71 IFCDPs (supported by 457 implants). The IFCDPs were assessed for technical complications, number of implants and cantilever extension, retention type and prosthetic material type. Comparison was made between ceramic IFCDPs (Group 1) and metal-resin IFCDPs (Group 2). Kaplan-Meier survival curve analysis was carried out for assessment of prosthesis survival and was done for both Groups 1 and 2 separately. The Cox proportional hazard model was used for survival analysis, adjusting for a number of potential confounders, to evaluate the association between prosthesis survival and several risk factors such as type of opposing occlusion, nightguard use, and presence of bruxism. Responses to patient satisfaction questions were compared with Fisher's exact test.

RESULTS

Out of 71 edentulous arches (52 patients) restored with IFCDPs, 6 IFCDPs had failed, yielding a cumulative prosthesis survival rate of 91.6 % after a mean observation period of 5.2 years (range: 1-12 years) after definitive prosthesis insertion. Three IFCDPs were lost due to implant failures after 5.8 to 11 years of functional loading. Additionally, 3 metal-resin IFCDPs failed due to technical complications. Minor complications were the most frequent complications observed, namely wear of the prosthetic material (9.8% annual rate) being the most common, followed by decementation of cement-retained IFCDPs (2.9%), and loss of the screw access filing material of the screw-retained IFCDPs (2.7%). The most frequently observed major complication was fracture of the prosthetic material (1.9% annual rate), followed by fracture of occlusal screw (0.3%), and fracture of framework (0.3%). The annual rate of wear of prosthetic material was 7.3% for porcelain IFCDPs (n = 19/55) and 19.4% for metal-resin IFCDPs (n = 13/16), yielding a statistically significant difference between the 2 groups (p = 0.01).

CONCLUSIONS

After a mean exposure time of 5.2 years, 91.6% prosthesis survival rates were achieved (65 out of 71 IFCDPs). The most frequent minor technical complication was wear of the prosthetic material with estimated 5-year rate of 49.0%, while the most frequent major complication was fracture of the prosthetic material with estimated 5-year dental unit-based rate of 9.5%. The cumulative rates for "prosthesis free of minor complications" at 5- and 10-years were 60.5% (95% CI: 47.2-71.3%) and 8.9% (95% CI: 2.9-18.0%), respectively. The cumulative rates for "prosthesis free of major technical complications" at 5- and 10-years were 85.5% (95% CI: 73.0-92.5%) and 30.1% (95% CI: 12.0-50.6%), respectively. Presence of bruxism, and absence of a nightguard were associated with increased risk for chipping of the prosthetic material of the IFCDPs.

Complications and survival rates of 55 metal-ceramic implant-supported fixed complete-arch prostheses: A cohort study with mean 5-year follow-up

STATEMENT OF PROBLEM

Long-term outcomes with metal-ceramic (MC) implant-supported fixed complete dental prostheses (IFCDPs) are scarce.

PURPOSE

The purpose of this retrospective study was to assess the rate of biologic and technical complications in a cohort of edentulous patients treated with MC IFCDPs by residents after a mean clinical follow-up of 5 years (range: 1 to 12 years).

MATERIAL AND METHODS

Forty-one participants with 55 MC IFCDPs underwent a single-visit comprehensive examination that included a medical and dental history review and clinical and radiographic examinations. All supporting implants and prostheses were examined for biologic and technical complications. Life table analysis and Kaplan-Meier survival curves were calculated.

RESULTS

Of 359 moderately rough surface dental implants, 2 had failed in 1 patient after 11 years of functional loading, yielding a cumulative implant survival rate of 99.4%. Owing to the implant failure, 1 of 55 edentulous arches restored with IFCDPs failed, yielding a cumulative prosthesis survival rate of 98.2% after mean observation period of 5.0 years. Soft tissue recession was the most frequent minor biologic complication (annual rate 7.8% at the prosthesis level) for both cement and screw-retained IFCDPs (group C and S), and peri-implantitis (annual rate 1.6% at the implant level) the most frequent major biologic complication. Wear of porcelain (annual rate 8.0% at the prosthesis level) was the most frequent minor technical complication for both groups, and fracture of porcelain (annual rate 0.8% at the dental-unit level) was the most frequent major technical complication. Minor complications were the most frequent in both the groups (cement and screw retained).

CONCLUSIONS

High implant and prosthesis survival rates (above 98%) were achieved, yet substantial complication rates were encountered. The most frequent major biologic complication was peri-implantitis, with a 5-year implant-based rate of 8% (95% confidence interval [CI]: 5.8-11.1), whereas the most frequent major complication was fracture of porcelain with a 5-year dental unit-based rate of 4%. The estimated cumulative rates for "prosthesis free of biologic complications" were 50.4% (95% CI: 36.4% to 63.0%) at 5 years and 10.1% (95% CI: 3.5% to 20.8%) at 10 years, whereas for "prosthesis free of technical complications," they were 56.4% (95% CI: 41.7% to 68.8%) at 5 years and 9.8% (95% CI: 3.2% to 21.0%) at 10 years.

Double Full-Arch Fixed Implant-Supported Prostheses: Outcomes and Complications after a Mean Follow-Up of 5 Years

PURPOSE

To retrospectively assess complications and clinical and radiographic outcomes of edentulous patients treated with double full-arch implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of 5.1 years.

MATERIALS AND METHODS

The single-visit clinical and radiographic examination included medical and dental history review and clinical assessment of biologic and technical complications encountered with all implants and IFCDPs. Life table analysis and Kaplan-Meier survival curves were calculated. Analysis was conducted to evaluate the association between prosthesis survival and several risk factors such as type of opposing occlusion, nightguard use, and presence of bruxism.

RESULTS

Nineteen edentulous patients restored with 38 IFCDPs were included. A total of 249 implants were placed and 2 implants failed after a mean observation period of 5.1 years (range: 1-12 years), yielding an overall implant survival rate of 99.2% and prosthesis survival rate of 92.1%. Three out of 38 IFCDPs were lost, 1 after implant losses and 2 due to technical complications. The most frequent minor biologic complication was soft tissue recession with an estimated 5-year rate of 45.5% (95% CI: 39.4-57.5), while the most frequent major complication was peri-implantitis with an estimated 5-year implant-based rate of 9.5% (95% CI: 6.7-11.3). The most frequent minor technical complication was wear of the prosthetic material with an estimated 5-year rate of 49.0% (95% CI: 37.4-76.4), while the most frequent major technical complication was fracture of the prosthetic material with an estimated 5-year dental unit-based rate of 8.0% (95% CI: 6.6-10.1).

CONCLUSIONS

After a mean use time of 5.1 years, high implant and prosthesis survival rates were observed. The most frequent major biologic complication was peri-implantitis, and the most frequent major technical complication was fracture of the prosthetic material. The 5-year estimated cumulative rates for "prosthesis free of biologic complications" was 50.7% (95% CI: 33.7-65.4) and for "prosthesis free of technical complications" was 57.1% (95% CI: 39.3-71.5).

Registration of patient-relevant references in edentulous jaws using intraoral scanners: simplification of the clinical procedure

With the advancement of computer-aided design/computer-aided manufacturing (CAD/CAM) in dentistry, the use of digital technologies is being increasingly adopted by clinicians and laboratory technicians. Clinicians are using intraoral scanners (IOSs) more and more to perform computer-aided impressions. While these are mainly used to digitize dentate or partially edentulous jaws, it is feasible with a few of the available systems to scan edentulous jaws, with or without implants. To scan edentulous jaws, the registration and articulation of patient-relevant references and planes is difficult without the use of physical casts. The present article introduces simple yet effective methods to integrate individual interocclusal information during the intraoral scan procedure. The techniques described aim to simplify the digital registration procedure of edentulous jaws, with or without implants, and integrate patient-relevant information in the virtual articulator without the need to manufacture and articulate casts after the intraoral scan.

Group 1 ITI Consensus Report: The influence of implant length and design and medications on clinical and patient-reported outcomes

OBJECTIVES

The aim of Working Group 1 was to address the influence of different local (implant length, diameter, and design) and systemic (medications) factors on clinical, radiographic, and patient-reported outcomes in implant dentistry. Focused questions on (a) short posterior dental implants (≤6 mm), (b) narrow diameter implants, (c) implant design (tapered compared to a non-tapered implant design), and (d) medication-related dental implant failures were addressed.

MATERIALS AND METHODS

Four systematic reviews were prepared in advance of the Consensus Conference and were discussed among the participants of Group 1. Consensus statements, clinical recommendations, and recommendations for future research were based on structured group discussions until consensus was reached among the entire expert Group 1. The statements were then presented and accepted following further discussion and modifications as required by the plenary.

RESULTS

Short implants (≤6 mm) revealed a survival rate ranging from 86.7% to 100%, whereas standard implant survival rate ranged from 95% to 100% with a follow-up from 1 to 5 years. Short implants demonstrated a higher variability and a higher Risk Ratio [RR: 1.24 (95% CI: 0.63, 2.44, p = 0.54)] for failure compared to standard implants. Narrow diameter implants (NDI) have been classified into three categories: Category 1: Implants with a diameter of <2.5 mm ("Mini-implants"); Category 2: Implants with a diameter of 2.5 mm to <3.3 mm; Category 3: Implants with a diameter of 3.3 mm to 3.5 mm. Mean survival rates were 94.7 ± 5%, 97.3 ± 5% and 97.7 ± 2.3% for category 1, 2 and 3. Tapered versus non-tapered implants demonstrated only insignificant differences regarding clinical, radiographic, and patient-reported outcomes. The intake of certain selective serotonin reuptake inhibitors and proton pump inhibitors is associated with a statistically significant increased implant failure rate. The intake of bisphosphonates related to the treatment of osteoporosis was not associated with an increased implant failure rate.

CONCLUSIONS

It is concluded that short implants (≤6 mm) are a valid option in situations of reduced bone height to avoid possible morbidity associated with augmentation procedures; however, they reveal a higher variability and lower predictability in survival rates. Narrow diameter implants with diameters of 2.5 mm and more demonstrated no difference in implant survival rates compared to standard diameter implants. In contrast, it is concluded that narrow diameter implants with diameters of less than 2.5 mm exhibited lower survival rates compared to standard diameter implants. It is further concluded that there are no differences between tapered versus non-tapered dental implants. Certain medications such as selective serotonin reuptake inhibitors and proton pump inhibitors showed an association with a higher implant failure rate.

Implant survival rates and biologic complications with implant-supported fixed complete dental prostheses: A retrospective study with up to 12-year follow-up

OBJECTIVES

To assess the rate of biologic complications and implant survival in edentulous patients treated with implant-supported fixed complete dental prostheses (IFCDPs) after a mean observation period of 5.2 years (range: 1-12 years).

MATERIALS AND METHODS

A single-visit clinical and radiographic examination was performed to assess types and rates of biologic complications with ceramic IFCDPs (Group 1) and metal-resin IFCDPs (Group 2).

RESULTS

Of 457 rough surface dental implants supporting 71 IFCDPs (52 patients), six had failed, yielding an implant survival rate of 98.7% after a mean observation period of 5.2 years after definitive prosthesis insertion. The most frequent minor biologic complication was soft tissue recession (7.7% annual rate), inflammation under the IFCDP (7.4% annual rate), and peri-implant mucositis (6.3% annual rate). The most frequent major biologic complication was peri-implantitis (2.0% annual rate), in 46/457 implants (10.1%) supporting 19 IFCDPs and late implant failure (0.3% annual rate). The frequency of biologic complications was not statistically different between Group 1 and Group 2. The presence of high plaque index had significant effect on bone loss.

CONCLUSIONS

After a mean exposure time of 5.2 years postdefinitive prosthesis insertion (range: 1-12 years), implant survival rate of 98.7% was achieved. The six implant failures in three patients occurred after 5 years and affected the prosthesis survival. Soft tissue recession was the most frequent minor biologic complication, whereas peri-implantitis was the most frequent major biologic complication. A 10-year implant-based mucosal recession rate of 77% (95% CI: 68.2-87.9) and a 10-year implant-based peri-implantitis rate of 20% (95% CI: 16.9-24.9) were found.

Replacing Six Missing Adjacent Teeth in the Anterior Maxilla With Implant Prostheses: A Case Series

Restoring multiple adjacent missing teeth in the anterior maxilla is one of the most challenging situations in clinical implant dentistry, as restorations need to be both functional and highly esthetic. The purpose of this article is to highlight the issues that arise during treatment planning for replacement of six missing maxillary anterior teeth with implant-supported fixed dental prostheses. Representative clinical reports are provided to illustrate the treatment planning and surgical and prosthodontic management. The authors describe the rationale for selecting the appropriate number and location of implants in relation to the amount of missing soft and hard tissues to achieve functional and esthetic prostheses.

Management of Technical Complications During Full-Mouth Implant Rehabilitation With Hybrid Prostheses Over a 7-Year Period

Monolithic ceramics have been introduced in dentistry to help reduce technical complications reported with implant-supported metal-resin hybrid prostheses. This clinical report describes the maintenance and technical complications that occurred during a full-mouth implant rehabilitation using different prosthetic materials over a 7-year period. During the course of 4 of those years, multiple technical complications were encountered with the metal-resin hybrid prostheses, prompting the need for increased maintenance.New prostheses were inserted with screw-retained titanium frameworks and individually cemented single crowns, and subsequently no technical complications were encountered after 2 years of follow-up.

Randomized Controlled Clinical Trial to Compare Posterior Implant-Supported Modified Monolithic Zirconia and Metal-Ceramic Single Crowns: One-Year Results

PURPOSE

The purpose of this randomized controlled clinical trial was to investigate the prosthetic outcomes of posterior implant-supported single crowns (SCs) with a modified monolithic zirconia or metal-ceramic design at 1 year of loading.

MATERIALS AND METHODS

Forty participants with 73 dental implants in need of at least 1 maxillary or mandibular posterior implant-supported SC were consecutively selected for this study. The included participants were randomly divided into modified monolithic zirconia (MMZ) and metal-ceramic (MC) groups. The implant-supported SCs were examined after 1 year for survival and technical complications. Descriptive statistics were used to illustrate the data, and the association associated risks of complications were estimated using the logistic regression model with Firth's approach for rare outcome (α = 0.05).

RESULTS

During the observation period, 2 participants in the MC group were lost to follow-up. A total of 38 participants with 70 posterior implant-supported SCs (36 and 34 SCs in the MMZ and MC groups respectively) completed the 1-year follow-up examination. One implant failed in the MMZ group. The 1-year survival rates for implants and crowns were both 97.2% in the MMZ group. The survival rates for implants and crowns were both 100% in the MC group. One screw loosening event was observed in one screw-retained SC in the MMZ group; however, 8 complication events occurred in 7 SCs in the MC group. Therefore, the complication-free rates were 97.1% and 79.4% in the MMZ and MC SCs respectively. The most common complication in the MC group was screw loosening (14.7%), followed by loss of retention (5.9%), and ceramic fracture (2.9%). Significantly more technical complications were observed in the MC SCs than MMZ SCs (p = 0.0432).

CONCLUSION

The modified monolithic zirconia design applied to the posterior implant-supported SCs had a significantly lower technical complication rate than did the metal-ceramic one.

Digital Workflow: From Guided Surgery to Final Full-Arch Implant Prosthesis in Three Visits

The purpose of this article is to report a digital workflow protocol for full-arch implant rehabilitation from guided surgery to final prosthesis in only three visits. This expedited protocol allows for implant placement with a surgical template generated from preoperative virtual planning and production of the CAD/CAM prosthodontic rehabilitation using a digital workflow. At the first visit, a guided implant placement protocol with the All-on-4 concept and immediate loading with the conversion prosthesis technique was done. At the same visit, final impression and interocclusal records, cast verification and mounting, as well as digital scanning of the conversion prosthesis were carried out. During the second visit, the framework try-in was performed. Lastly, the third visit included delivery of the final full-arch prosthesis opposed by a maxillary complete denture.

Clinical Results and Technical Complications of Posterior Implant-Supported Modified Monolithic Zirconia Single Crowns and Short-Span Fixed Dental Prostheses: A 2-Year Pilot Study

PURPOSE

The purpose of this clinical trial was to investigate the clinical outcomes of implant-supported modified monolithic zirconia single crowns (SCs) and short-span fixed dental prostheses (FDPs) after a follow-up of 2 years.

MATERIALS AND METHODS

Twenty-seven patients in need of implant-supported SCs or 3-unit FDPs in the posterior maxilla or mandible were consecutively selected for this study. A total of 56 modified monolithic zirconia prostheses including 44 SCs (8 screw-retained, 36 cement-retained) and twelve 3-unit FDPs (5 screw-retained, 7 cement-retained) were included in this study. All patients were followed at 6 months, 12 months, 18 months, and 2 years after placement of the modified monolithic zirconia prostheses. During the follow-up period, all prostheses were evaluated with clinical and radiographic examinations. The following technical parameters were assessed: framework fracture, fracture of veneering porcelain, screw loosening, loss of retention because of prosthesis de-cementation and opposing tooth fracture.

RESULTS

No implant was lost during the follow-up period, yielding a 2-year implant survival of 100%. One FDP failed because of framework fracture. The overall prosthesis survival rate was 98.2% after 2 years of clinical service. During the study, 5 complication events were observed in 3 SCs and one FDP, including one fracture of veneering porcelain and 2 screw loosenings in 3 SCs, and loss of retention and opposing tooth fracture in the same FDP. Therefore, the complication-free rate of prostheses was 91.1%.

CONCLUSION

According to the results of this study, the modified monolithic zirconia design used in this study resulted in a favorable short-term outcome for posterior implant-supported SCs and 3-unit FDPs.

Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy

STATEMENT OF PROBLEM

To the authors' knowledge, while accuracy outcomes of the TRIOS scanner have been compared with conventional impressions, no available data are available regarding the accuracy of digital scans with the Omnicam and True Definition scanners versus conventional impressions for partially edentulous arches.

PURPOSE

The purpose of this in vitro study was to compare the accuracy of digital implant scans using 2 different intraoral scanners (IOSs) with that of conventional impressions for partially edentulous arches.

MATERIAL AND METHODS

Two partially edentulous mandibular casts with 2 implant analogs with a 30-degree angulation from 2 different implant systems (Replace Select RP; Nobel Biocare and Tissue level RN; Straumann) were used as controls. Sixty digital models were made from these 2 definitive casts in 6 different groups (n=10). Splinted implant-level impression procedures followed by digitization were used to produce the first 2 groups. The next 2 groups were produced by digital scanning with Omnicam. The last 2 groups were produced by digital scanning with the True Definition scanner. Accuracy was evaluated by superimposing the digital files of each test group onto the digital file of the controls with inspection software.

RESULTS

The difference in 3-dimensional (3D) deviations (median ±interquartile range) among the 3 impression groups for Nobel Biocare was statistically significant among all groups (P<.001), except for the Omnicam (20 ±4 μm) and True Definition (15 ±6 μm) groups; the median ±interquartile range for the conventional group was 39 ±18 μm. The difference in 3D deviations among the 3 impression groups for Straumann was statistically significant among all groups (P=.003), except for the conventional impression (22 ±5 μm) and True Definition (17 ±5 μm) groups; the median ±interquartile range for the Omnicam group was 26 ±15 μm. The difference in 3D deviations between the 2 implant systems was significant for the Omnicam (P=.011) and conventional (P<.001) impression techniques but not for the True Definition technique (P=.247).

CONCLUSIONS

Within the limitations of this study, both the impression technique and the implant system affected accuracy. The True Definition technique had the fewest 3D deviations compared with the other 2 techniques; however, the accuracy of all impression techniques was within clinically acceptable levels, and not all differences were statistically significant.