The growth and improved magnetoelectric response of strain-modified Aurivillius SrBi4.25La0.75Ti4FeO18 thin films

In this study, we grew 5-layered SrBi4.25La0.75Ti4FeO18 (SBLFT) polycrystalline thin films (80-330 nm thick) via pulsed-laser deposition to study their ferroelectric and magnetoelectric response. Structural/microstructural analysis confirmed the formation of orthorhombic SBLFT with good crystallinity and randomly oriented Aurivillius phases. Detailed scanning transmission electron microscopy analysis of 120 nm film revealed a predominantly five-layered structure with the coexistence of four-layer stacking. Such stacking defects are found to be pertinent to the high structural flexibility of Bi-rich Aurivillius phases, alleviated by lattice strain. Raman spectral features at ambient temperatures depict the signature of the orthorhombic-tetragonal phase transition. SBLFT films have a strong ferroelectric nature (remanent polarization 2Pr of 35 μC cm-2) with a fatigue endurance up to 1010 cycles and strongly improved, switchable magnetization as opposed to its antiferromagnetic bulk counterpart. The scaling behavior of dynamic hysteresis reveals that ferroelectric domain reversal has good stability and low energy consumption. We observed the presence of SBLFT nanoregions (1-5 nm), distributed across the film, with Bi and Fe-rich compositions and oxygen vacancies that contribute to the weak ferromagnetic behavior mediated by the Dzyaloshinskii-Moriya interactions. Subtle changes in the structural strain and lattice distortions of thin films with varied thicknesses led to distinct ferroic properties. Stronger ferroelectric polarization of 80 nm and 120 nm films compared to that of thicker ones can be due to structural strain and the possible rearrangement of BO6 octahedra. The observation of the improved magnetoelectric coefficient of 50 mV cm-1 Oe-1 for 120 nm film, as compared to that of several Aurivillius oxides, indicates that the structural strain modification in SBLFT is beneficial for the fatigue-free magnetic field switching of ferroelectric polarization. The structural strain of the unit cell as well as the presence of Bi- and ferromagnetic Fe-rich nanoregions was found to be responsible for the improved multiferroic behaviour of the SBLFT films.

Coaxial nanowires as plasmon-mediated remote nanosensors

This study reports on the plasmon-mediated remote Raman sensing promoted by specially designed coaxial nanowires. This unusual geometry for Raman study is based on the separation, by several micrometres, of the excitation laser spot, on one tip of the nanowire, and the Raman detection at the other tip. The very weak efficiency of Raman emission makes it challenging in a remote configuration. For the proof-of-concept, we designed coaxial nanowires consisting of a gold core to propagate surface plasmon polaritons and a Raman-emitting shell of poly(3,4-ethylene-dioxythiophene). The success of the fabrication was demonstrated by correlating, for the same single nanowire, a morphological analysis by electron microscopy and Raman spectroscopy analysis. Importantly for probing the remote-Raman effect, the original hard template-based process allows one to control the location of the polymer shell all along the nanowire, or only close to one or the two nanowire tips. Such all-in-one single nanowires could have applications in the remote detection of photo-degradable substances and for exploring 1D nanosources for integrated photonic and plasmonic systems.

Graphene oxide-carbon nanotube hybrid assemblies: cooperatively strengthened OH···O 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 C hydrogen bonds and the removal of chemisorbed water

The effective removal of chemisorbed water in graphene oxide by oxidized carbon nanotubes via cooperatively strengthened OH···OC hydrogen bonds.

Owing to their great significance for energy storage and sensing applications, multi-layer papers consisting of graphene oxide–carbon nanotube (GO–CNT) hybrid sheets were prepared by in situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. the water molecules inherently bound to the oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···OC hydrogen bonds between the carboxylic groups of the oCNTs and OFGs of GO. At oCNT amounts of about 10 to 15 wt% this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. The thermally reduced GO–CNT (rGO–CNT) papers reveal improved sp² character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of the cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices.

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst.

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: effect of the oxygen content

The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp(2) bonding configuration (sp(2) fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 × 10(3) S m(-1) at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods.

Synthesis and characterization of MoS2 nanosheets

Here, we report on the synthesis of MoS2 nanosheets using a simple two-step additive-free growth technique. The as-synthesized nanosheets were characterized to determine their structure and composition, as well as their optical properties. The MoS2 nanosheets were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), including high-resolution scanning TEM imaging and energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL). The as-produced MoS2 nanosheets are vertically aligned with curved edges and are densely populated. The TEM measurements confirmed that the nanosheets have the 2H-MoS2 crystal structure in agreement with the Raman results. The XPS results revealed the presence of high purity MoS2. Moreover, a prominent PL similar to mechanically exfoliated few and mono-layer MoS2 was observed for the as-grown nanosheets. For the thin (≤50 nm) nanosheets, the PL feature was observed at the same energy as that for a direct band-gap monolayer MoS2 (1.83 eV). Thus, the as-produced high-quality, large-area, MoS2 nanosheets could be potentially useful for various optoelectronic and catalysis applications.

Electron energy-loss spectroscopic tomography of FexCo(3−x)O4 impregnated Co3O4 mesoporous particles: unraveling the chemical information in three dimensions

Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures.

Fully Crystalline Faceted Fe-Au Core-Shell Nanoparticles

Fe-Au core-shell nanoparticles displaying an original polyhedral morphology have been successfully synthesized through a physical route. Analyses using transmission electron microscopy show that the Au shell forms truncated pyramids epitaxially grown on the (100) facets of the iron cubic core. The evolution of the elastic energy and strain field in the nanoparticles as a function of their geometry and composition is calculated using the finite-element method. The stability of the remarkable centered core-shell morphology experimentally observed is attributed to the weak elastic energy resulting from the low misfit at the Fe/Au (100) interface compared to the surface energy contribution.

Nitrogen segregation in nanocarbons

We explore the behaviour of nitrogen doping in carbon nanomaterials, notably graphene, nanotubes, and carbon thin films. This is initially via a brief review of the literature, followed by a series of atomistic density functional calculations. We show that at low concentrations, substitutional nitrogen doping in the sp(2)-C graphenic basal plane is favoured, however once the nitrogen concentration reaches a critical threshold there is a transition towards the formation of the more thermodynamically-favoured nitrogen terminated 'zigzag' type edges. These can occur either via formation of finite patches (polycyclic aromatic azacarbons), strips of sp(2) carbon with zigzag nitrogen edges, or internal nitrogen-terminated hole edges within graphenic planes. This transition to edge formation is especially favoured when the nitrogen can be partially functionalised with, e.g. hydrogen. By comparison with available literature results, notably from electron energy loss spectroscopy and X-ray spectroscopy, the current results suggest that much of the nitrogen believed to be incorporated into carbon nanoobjects is instead likely to be present terminating the edges of carbonaceous impurities attached to nanoobject's surface. By comparison to nitrogen-doped tetrahedrally amorphous carbon, we suggest that this transition at around 10-20% nitrogen concentration and above towards sp(2) coordination via internal nitrogen-terminated edge formation may be a general property of nitrogen-doped carbon materials.

Experimental evidence of a mechanical coupling between layers in an individual double-walled carbon nanotube

We perform transmission electron microscopy, electron diffraction, and Raman scattering experiments on an individual suspended double-walled carbon nanotube (DWCNT). The first two techniques allow the unambiguous determination of the DWCNT structure: (12,8)@(16,14). However, the low-frequency features in the Raman spectra cannot be connected to the derived layer diameters d by means of the 1/d power law, widely used for the diameter dependence of the radial-breathing mode of single-walled nanotubes. We discuss this disagreement in terms of mechanical coupling between the layers of the DWCNT, which results in collective vibrational modes. Theoretical predictions for the breathing-like modes of the DWCNT, originating from the radial-breathing modes of the layers, are in a very good agreement with the observed Raman spectra. Moreover, the mechanical coupling qualitatively explains the observation of Raman lines of breathing-like modes, whenever only one of the layers is in resonance with the laser energy.

Extending the analysis of EELS spectrum-imaging data, from elemental to bond mapping in complex nanostructures

Multiple least squares fitting has been employed for long time in elemental electron energy-loss spectroscopy (EELS) analysis, in particular in biology, but with the hypothesis of a rather stable shape for the used core-loss signals. In the present case, we explore its use for identifying the variations in the edges' fine structures in complex boron nitride samples and in particular for mapping the bonding types of boron in such samples. Details about this improved procedure applied to data acquired in the spectrum-imaging mode are reported here.

Purification of single-walled boron nitride nanotubes and boron nitride cages

Continuous laser vaporization of a BN target under N2 atmosphere is up to now the unique route to single-walled boron nitride nanotubes (BN-SWNTs). Although grams of product can be obtained by this technique, the raw material contains in addition to the BN-SWNTs, different by-products made of boron and nitrogen. Since these materials are undesirable for the studying of the intrinsic properties of the nanotubes, we have undertaken a purification process using chemical and physical methods to separate the different components. We show here that most impurities can be removed by successive cycles of washing, sonication, and centrifugation. Furthermore, the two different types of boron nitride nanostructures i.e., BN-SWNTs and BN-cages can be isolated. Efficiency of the separation was monitored by transmission electron microscopy (TEM) at the different steps of the process. Finally, we envisage the further purification of the nanotubes-enriched fraction by functionalizing the nanotubes in a non covalent manner by specific polymers as for carbon nanotubes and BN multi-walled nanotubes.

Vibrational properties of hexagonal boron nitride: inelastic X-ray scattering and ab initio calculations

The phonon dispersion relations of bulk hexagonal boron nitride have been determined from inelastic x-ray scattering measurements and analyzed by ab initio calculations. Experimental data and calculations show an outstanding agreement and reconcile the controversies raised by recent experimental data obtained by electron-energy loss spectroscopy and second-order Raman scattering.

Raman spectroscopy of single-wall boron nitride nanotubes

Single-wall boron nitride nanotubes samples synthesized by laser vaporization of a hexagonal BN target under a nitrogen atmosphere are studied by UV and visible Raman spectroscopy. We show that resonant conditions are necessary for investigating phonon modes of BNNTs. Raman excitation in the UV (229 nm) provides preresonant conditions, allowing the identification of the A1 tangential mode at 1370 cm(-1). This is 5 cm(-1) higher than the E(2g) mode in bulk h-BN. Ab initio calculations show that the lower frequency of bulk h-BN with respect to large diameter nanotubes and the single sheet of h-BN is related to a softening of the sp2 bonds in the bulk due to interlayer interaction.

Electron energy loss spectroscopy measurement of the optical gaps on individual boron nitride single-walled and multiwalled nanotubes

Spatially resolved electron energy loss spectroscopy experiments have been performed in an electron microscope on several individual boron nitride (BN) single-, double-, and triple-walled nanotubes, whose diameters and number of shells have been carefully measured. In the low-loss region (from 2 to 50 eV) the spectra have been analyzed within the framework of the continuum dielectric theory, leading to the conclusion of a weak influence of out-of-plane contribution to the dielectric response of the tubes. The gap has been measured to be independent of the nanotubes geometry, and close to the in-plane gap value of hexagonal BN (5.8+/-0.2 eV).

Optical transitions in single-wall boron nitride nanotubes

Optical transitions in single-wall boron nitride nanotubes are investigated by means of optical absorption spectroscopy. Three absorption lines are observed. Two of them (at 4.45 and 5.5 eV) result from the quantification involved by the rolling up of the hexagonal boron nitride (h-BN) sheet. The nature of these lines is discussed, and two interpretations are proposed. A comparison with single-wall carbon nanotubes leads one to interpret these lines as transitions between pairs of van Hove singularities in the one-dimensional density of states of boron nitride single-wall nanotubes. But the confinement energy due to the rolling up of the h-BN sheet cannot explain a gap width of the boron nitride nanotubes below the h-BN gap. The low energy line is then attributed to the existence of a Frenkel exciton with a binding energy in the 1 eV range.