CO₂ Adsorption Investigation on an Innovative Nanocomposite Material with Hierarchical Porosity

A NaX nanozeolite-geopolymer monolith, with hierarchical porosity, has been produced by a one-pot hydrothermal synthesis using metakaolin as alluminosilicate source and a sodium silicate solution as activator. Its final composition, reported in terms of oxides, is 1.3-Na₂O-3.0SiO₂-1Al₂O₃-12H₂O. Its microstructural and chemical features and CO₂ adsorption performance have been investigated. The microstructure of the composite is characterized by NaX zeolite nanocrystals glued by the geopolymeric binder to form a complex three-dimensional network of pores. Overall porosity resulted ~23.5%, whereas compressive strength is 16±0.7 MPa. Monolith showed BET surface area of 350 m²/g, a micropore surface area of 280 m²/g and a mesopore volume, due to the geopolymeric binder, of 0.09 cm³/g. Its CO₂ adsorption capacity has been measured at the temperatures of 7, 25 and 42 °C up to 15 bar using an optimized Sievert-type (volumetric) apparatus. All the adsorption data were evaluated by Toth/Langmuir isotherm model and commercial pure NaX zeolite was used as reference. CO₂ adsorption isotherms show a maximum uptake value around 21 wt% at (~7 °C) that decrease to 18 wt% at high temperature (~42 °C) passing through 19 wt% at room temperature (~25 °C). The homogeneity grade of the surface, as obtained using Toth analysis performed on the adsorption isotherm, is close to t ≅ 0.40, lower than the 0.61 obtained for pure commercial NaX zeolite, as a consequence of the binder formation. Monolith exhibits a notably higher K values and quicker saturation with respect to reference that can be ascribed to the presence of mesoporosity that provides an easier and faster transport of CO₂ in the NaX nanozeolite framework. The produced composite is a potential solid adsorbent candidate in industrial process.

Virtual unrolling and deciphering of Herculaneum papyri by X-ray phase-contrast tomography

A collection of more than 1800 carbonized papyri, discovered in the Roman ‘Villa dei Papiri’ at Herculaneum is the unique classical library survived from antiquity. These papyri were charred during 79 A.D. Vesuvius eruption, a circumstance which providentially preserved them until now. This magnificent collection contains an impressive amount of treatises by Greek philosophers and, especially, Philodemus of Gadara, an Epicurean thinker of 1st century BC. We read many portions of text hidden inside carbonized Herculaneum papyri using enhanced X-ray phase-contrast tomography non-destructive technique and a new set of numerical algorithms for ‘virtual-unrolling’. Our success lies in revealing the largest portion of Greek text ever detected so far inside unopened scrolls, with unprecedented spatial resolution and contrast, all without damaging these precious historical manuscripts. Parts of text have been decoded and the ‘voice’ of the Epicurean philosopher Philodemus is brought back again after 2000 years from Herculaneum papyri.

Island organization of TiO2 hierarchical nanostructures induced by surface wetting and drying

We report on the reorganization and bundling of titanium oxide nanostructured layers, induced by wetting with different solvents and subsequent drying. TiO(2) layers are deposited by pulsed laser deposition and are characterized by vertically oriented, columnar-like structures resulting from assembling of nanosized particles; capillary forces acting during evaporation induce bundling of these structures and lead to a micrometer-size patterning with statistically uniform islands separated by channels. The resulting surface is characterized by a hierarchical, multiscale morphology over the nanometer-micrometer length range. The structural features of the pattern, i.e., characteristic length, island size, and channel width, are shown to depend on properties of the liquid (i.e., surface tension) and thickness and density of the TiO(2) layers. The studied phenomenon permits the controlled production of multiscale hierarchically patterned surfaces of nanostructured TiO(2) with large porosity and large surface area, characterized by superhydrophilic wetting behavior without need for UV irradiation.

Collective excitations in nanoscale thin alkali films: Na/Cu(111)

The relationship between electron quantum confinement and the energy dispersion of the surface plasmon in nanoscale thin Na layers adsorbed on Cu(111) at room temperature have been studied by high resolution electron energy loss spectroscopy. Screening effects due to electron quantum confinement occurring in this system cause the lowering of the surface plasmon frequency and, moreover, make the energy range of its dispersion curve larger than in thick alkali films. Landau damping of the plasma excitation was unexpectedly very efficient at small momenta. The dispersion curve of the Na surface plasmon was found to depend on the primary electron beam energy. Multipole surface plasmon at 4.70 eV was observed only for higher impinging energies.

High resolution electron energy loss measurements of Na∕Cu(111) and H2O∕Na∕Cu(111): Dependence of water reactivity as a function of Na coverage

Collective electronic excitations occurring in Na layers grown on Cu(111) and in H2O/Na/Cu(111) have been investigated at room temperature by high resolution electron energy loss spectroscopy. Loss spectra taken for a coverage between 0.55 and 0.70 ML of Na are characterized by a feature at 3.0 eV assigned to a Mie resonance. Further increasing the Na coverage leads to the appearance of the Na surface plasmon at 3.9 eV. Water molecules dissociate on Na layers as shown by the appearance of the OH-Na vibration. Upon water adsorption, relevant effects on both electronic excitations and vibrational modes were observed as a function of Na coverage.

Nanocrystalline metal/carbon composites produced by supersonic cluster beam deposition

In this work we show that supersonic cluster beam deposition is a viable method for the synthesis of nanocrystalline metal/carbon composites. By assembling carbon and metallic clusters seeded in a supersonic beam, we have grown films consisting of metal nanoparticles embedded in a nano-structured carbon matrix. Samples containing 3d transition metals (Ti, Ni) and noble metals (Au, Pd, Pt) with different metal abundances, particle size and dilution have been characterized by transmission electron microscopy. The influence of different metals on the structure of the carbon matrix has been investigated. Spatially resolved ultraviolet photoemission electron spectroscopy showed substantial surface oxidation of 3d transition metal clusters. On a micrometric scale, the spatial distribution of the metallic nanoparticles appeared to be homogeneous.

Raman Investigation of the Ionic Liquid N-Methyl-N-propylpyrrolidinium Bis(trifluoromethanesulfonyl)imide and Its Mixture with LiN(SO2CF3)2

A preliminary Raman investigation of the ionic liquid N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR(13)TFSI) and its 2/1 complex with the lithium salt LiN(SO(2)CF(3))(2) is reported. The study was performed over a temperature range extending from -100 to +60 degrees C, i.e., with PYR(13)TFSI in the crystalline and melt states. For comparison purposes, the study was extended to PYR(13)I, which is the precursor used in the synthesis of PYR(13)TFSI.