Nickel, copper, and zinc dinuclear helicates: how do bulky groups influence their architecture?

The ligand design factors that may influence the isolation of metallosupramolecular helicates or mesocates still deserve to be investigated. In this sense, dinuclear nickel(II), copper(II) and zinc(II) compounds were obtained by electrochemical synthesis using a family of five Schiff base ligands, H2Ln (n = 1-5), derived from bisphenylmethane and functionalized with bulky tert-butyl groups in the periphery and ethyl groups in the spacer. Six of the new complexes were characterized by X-ray crystallography, thus demonstrating that the helicate structure is predominant in the solid state. 1H NMR studies were performed for the zinc complexes to analyze if the helical architecture of the metal complexes is retained in solution. These studies reveal that the presence of a tert-butyl group in the ortho position with respect to the OH group is an essential factor identified for the existence of a helicate conformation in solution.

A Dinuclear Copper(II) Complex Electrochemically Obtained via the Endogenous Hydroxylation of a Carbamate Schiff Base Ligand: Synthesis, Structure and Catalase Activity

In the present work, we report a neutral dinuclear copper(II) complex, [Cu2(L1)(OH)], derived from a new [N,O] donor Schiff base ligand L1 that was formed after the endogenous hydroxylation of an initial carbamate Schiff base H2L coordinated with copper ions in an electrochemical cell. The copper(II) complex has been fully characterized using different techniques, including X-ray diffraction. Direct current (DC) magnetic susceptibility measurements were also performed at variable temperatures, showing evidence of antiferromagnetic behavior. Its catalase-like activity was also tested, demonstrating that this activity is affected by temperature.

Enemies or Allies? Hormetic and Apparent Non-Dose-Dependent Effects of Natural Bioactive Antioxidants in the Treatment of Inflammation

This review aims to analyze the emerging number of studies on biological media that describe the unexpected effects of different natural bioactive antioxidants. Hormetic effects, with a biphasic response depending on the dose, or activities that are apparently non-dose-dependent, have been described for compounds such as resveratrol, curcumin, ferulic acid or linoleic acid, among others. The analysis of the reported studies confirms the incidence of these types of effects, which should be taken into account by researchers, discarding initial interpretations of imprecise methodologies or measurements. The incidence of these types of effects should enhance research into the different mechanisms of action, particularly those studied in the field of basic research, that will help us understand the causes of these unusual behaviors, depending on the dose, such as the inactivation of the signaling pathways of the immune defense system. Antioxidative and anti-inflammatory activities in biological media should be addressed in ways that go beyond a mere statistical approach. In this work, some of the research pathways that may explain the understanding of these activities are revised, paying special attention to the ability of the selected bioactive compounds (curcumin, resveratrol, ferulic acid and linoleic acid) to form metal complexes and the activity of these complexes in biological media.

Desulfurization of thiosemicarbazones: the role of metal ions and biological implications

Thiosemicarbazones are biologically active substances whose structural formula is formed by an azomethine, an hydrazine, and a thioamide fragments, to generate a R2C=N-NR-C(=S)-NR2 backbone. These compounds often act as ligands to generate highly stable metal-organic complexes. In certain experimental conditions, however, thiosemicarbazones undergo reactions leading to the cleavage of the chain. Sometimes, the breakage involves desulfurization processes. The present work summarizes the different chemical factors that influence the desulfurization reactions of thiosemicarbazones, such as pH, the presence of oxidant reactants or the establishment of redox processes as those electrochemically induced, the effects of the solvent, the temperature, and the electromagnetic radiation. Many of these reactions require coordination of thiosemicarbazones to metal ions, even those present in the intracellular environment. The nature of the products generated in these reactions, their detection in vivo and in vitro, together with the relevance for the biological activity of these compounds, mainly as antineoplastic agents, is discussed.

Schiff Bases Functionalized with T-Butyl Groups as Adequate Ligands to Extended Assembly of Cu(II) Helicates

The study of the inherent factors that influence the isolation of one type of metallosupramolecular architecture over another is one of the main objectives in the field of Metallosupramolecular Chemistry. In this work, we report two new neutral copper(II) helicates, [Cu₂(L¹)₂]·4CH₃CN and [Cu₂(L²)₂]·CH₃CN, obtained by means of an electrochemical methodology and derived from two Schiff-based strands functionalized with ortho and para-t-butyl groups on the aromatic surface. These small modifications let us explore the relationship between the ligand design and the structure of the extended metallosupramolecular architecture. The magnetic properties of the Cu(II) helicates were explored by Electron Paramagnetic Resonance (EPR) spectroscopy and Direct Current (DC) magnetic susceptibility measurements.

Exploring the Biological Properties of Zn(II) Bisthiosemicarbazone Helicates

The design of artificial helicoidal molecules derived from metal ions with biological properties is one of the objectives within metallosupramolecular chemistry. Herein, we report three zinc helicates derived from a family of bisthiosemicarbazone ligands with different terminal groups, Zn₂(L^Me)₂∙2H₂O 1, Zn₂(L^Ph)₂∙2H₂O 2 and Zn₂(L^PhNO2)₂3, obtained by an electrochemical methodology. These helicates have been fully characterized by different techniques, including X-ray diffraction. Biological studies of the zinc(II) helicates such as toxicity assays with erythrocytes and interaction studies with proteins and oligonucleotides were performed, demonstrating in all cases low toxicity and an absence of covalent interaction with the proteins and oligonucleotides. The in vitro cytotoxicity of the helicates was tested against MCF-7 (human breast carcinoma), A2780 (human ovarian carcinoma cells), NCI-H460 (human lung carcinoma cells) and MRC-5 (normal human lung fibroblasts), comparing the IC₅₀ values with cisplatin. We will try to demonstrate if the terminal substituent of the ligand precursor exerts any effect in toxicity or in the antitumor activity of the zinc helicates.

Two Synthetic Approaches to Coinage Metal(I) Mesocates: Electrochemical versus Chemical Synthesis

We report two different approaches to isolate neutral and cationic mesocate-type metallosupramolecular architectures derived from coinage monovalent ions. For this purpose, we use a thiocarbohydrazone ligand, H₂L (1), conveniently tuned with bulky phosphine groups to stabilize the M^I ions and prevent ligand crossing to achieve the selective formation of mesocates. The neutral complexes [Cu₂(HL)₂] (2), [Ag₂(HL)₂] (3), and [Au₂(HL)₂] (4) were prepared by an electrochemical method, while the cationic complexes [Cu₂(H₂L)₂](PF₆)₂ (5), [Cu₂(H₂L)₂](BF₄)₂ (6), [Ag₂(H₂L)₂](PF₆)₂ (7), [Ag₄(HL)₂](NO₃)₂ (8), and [Au₂(H₂L)₂]Cl₂ (9) were obtained by using a metal salt as the precursor. All of the complexes are neutral or cationic dinuclear mesocates, except the silver nitrate derivative, which exhibits a tetranuclear cluster mesocate architecture. The crystal structures of the neutral and cationic copper(I), silver(I), and gold(I) complexes allow us to analyze the influence of synthetic methodology or the counterion role on both the micro- and macrostructures of the mesocates.

Conversion of a double-tetranuclear cluster silver helicate into a dihelicate via a rare desulfurization process

We show the first example of a bisthiosemicarbazone silver double-tetranuclear cluster helicate [Ag4L2]2 obtained by electrochemical synthesis which undergoes a rare desulfurization process giving rise to a cationic silver dihelicate [Ag2(H2L)2]SO4.

Neuroprotective effects of fluorophore-labelled manganese complexes: Determination of ROS production, mitochondrial membrane potential and confocal fluorescence microscopy studies in neuroblastoma cells

In this work, four manganese(II) complexes derived from the ligands H₂L¹-H₂L⁴, that incorporate dansyl or tosyl fluorescent dyes, have been investigated in term of their antioxidant properties. Two of the manganese(II) complexes have been newly prepared using the asymmetric half-salen ligand H₂L² and the thiosemicarbazone ligand H₂L³. The four organic strands and the manganese complexes have been characterized by different analytical and spectroscopic techniques. The study of the antioxidant behaviour of these two new complexes and other two fluorophore-labelled analogues was tested in SH-SY5Y neuroblastoma cells. These four model complexes 1-4 were found to protect cells from oxidative damage in this human neuronal model, by reducing the release of reactive oxygen species. Complexes 1-4 significantly improved cell survival, with levels between 79.1 ± 0.8% and 130.9 ± 4.1%. Moreover, complexes 3 and 4 were able to restore the mitochondrial membrane potential at 1 μM, with 4 reaching levels higher than 85%, similar to the percentages obtained by the positive control agent cyclosporin A. The incorporation of the fluorescent label in the complexes allowed the study of their ability to enter the human neuroblastoma cells by confocal microscopy.

Multicatalysis Combining 3D-Printed Devices and Magnetic Nanoparticles in One-Pot Reactions: Steps Forward in Compartmentation and Recyclability of Catalysts

A tricatalytic compartmentalized system that immobilizes metallic species to perform one-pot sequential functionalization is described: a three-dimensional (3D)-printed palladium monolith, ferritic copper(I) magnetic nanoparticles, and a 3D-printed polypropylene capsule-containing copper(II) loaded onto polystyrene-supported 1,5,7-triazabicyclo[4.4.0]dec-5-ene (PS-TBD) allowed the rapid synthesis of diverse substituted 1-([1,1'-biphenyl]-4-yl)-1H-1,2,3-triazoles. The procedure is based on the Chan-Lam azidation/copper alkyne-azide cycloaddition/Suzuki reaction strategy in the solution phase. This catalytic system enabled the efficient assembly of the final compounds in high yields without the need for special additives or intermediate isolation. The monolithic catalyst-containing immobilized palladium species was synthesized by surface chemical modification of a 3D-printed silica monolith using a soluble polyimide resin as a key reagent, thus creating an extremely robust composite. All three immobilized catalysts described here were easily recovered and reused in numerous cycles. This work exemplifies the role of 3D printing in the design and manufacture of devices for compartmented multicatalytic systems to carry out complex one-pot transformations.

Effect of the Metal Ion on the Enantioselectivity and Linkage Isomerization of Thiosemicarbazone Helicates

The effect of the metal ion and ligand design on the enantioselectivity and linkage isomerization of neutral cobalt and zinc bisthiosemicarbazone metallohelicates has been investigated in this work. The electrochemical synthesis has afforded the enantioselective formation of chirally pure cobalt helicates, and the ΛΛ isomer of a single enantiomer has been crystallized as only product for the cobalt methyl-substituted thiosemicarbazone helicate. Interestingly linkage isomers have been formed from zinc ethyl-substituted thiosemicarbazone helicate enantiomers for the first time. The co-existence of these isomers has been evaluated from the point of view of both experimental results and computational calculations.

An unusual assembled Pb(ii) meso-helicate that shows the inert pair effect

We report on a meso-helicate exhibiting the inert pair effect for the first time, demonstrating that this effect must be considered for the controlled assembly of Pb(ii) supramolecular helicates/mesocates.

Endogenous arene hydroxylation promoted by copper(I) cluster helicates

A novel neutral triple-stranded hexanuclear copper(I) cluster helicate [Cu(I)(6)L(3)]·2CH(3)CN derived from a thiosemicarbazone ligand could be synthesized and crystallographically characterized. The MALDI mass spectrum of this complex suggests that the tetranuclear copper(I) cluster helicate [Cu(I)(4)L(2)] is also present in solution. These copper(I) cluster helicates are capable, in the presence of O(2), of hydroxylating the arene linker of their supporting ligand strands. The resulting dinuclear complex [Cu(II)(2)L'(OH)] is formed by two copper(II) centers, a new ligand arising from the hydroxylation reaction, and one hydroxide group. The magnetic investigation of this compound shows a strong antiferromagnetic coupling between the two Cu(II) centers. The kinetic studies for the hydroxylation process show values of ΔH(≠)=-70 kJ mol(-1), similar to those mediated by the tyrosinase enzymes.

Pentadentate thiosemicarbazones as versatile chelating systems. A comparative structural study of their metallic complexes

We have prepared some transition and post-transition metal complexes derived from the pentadentate thiosemicarbazone ligand bis(4-N-ethylthiosemicarbazone)-2,6-diacetylpyridine H(2)L(Et), by both chemical and electrochemical procedures. The complexes have been synthesised and fully characterised, including the crystal structures for the ligand H(2)L(Et) and its manganese, cadmium and lead complexes. We have also performed multinuclear (109)Ag, (113)Cd, (119)Sn and (207)Pb studies for silver, cadmium, tin and lead compounds, respectively. Moreover we present here a comparative study on the different structures found for pentadentate thiosemicarbazonate complexes, trying to check the influence of different factors, such as experimental procedure, size of metal, structure of the ligand, and metal oxidation state, on the final structure of the complex formed. Our aim is gaining a better insight into the coordination trends of pentadentate thiosemicarbazone ligands.

Metal-catalysed oxidation processes in thiosemicarbazones: new complexes with the ligand N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide

The coordination behaviour of a new thiosemicarbazone Schiff-base building block, N-{2-([4-N-ethylthiosemicarbazone]methyl)phenyl}-p-toluenesulfonamide, H2L1 (1), incorporating a bulky tosyl group, towards Mn II, Fe II, Co II, Ni II, Cu II, Zn II, Cd II, Ag I, Sn II, and Pb II has been investigated by means of an electrochemical preparative procedure. Most metal complexes of L1 have the general formula [M(L1)]2.nX (M=Mn, Fe, Co, Ni, Cu, Cd, Pb; n=0-4, X=H2O or CH3CN), as confirmed by the structure of [Pb(L1)]2 (15), in which the lone pair on lead is stereochemically active. This lead(II) complex shows an intense fluorescence emission with a quantum yield of 0.13. In the case of silver, the complex formed was found to possess a stoichiometry of [Ag2(L1)]2.3H2O. During reactions with manganese and copper metals, interesting catalysed processes have been found to take place, with remarkable consequences regarding the ligand skeleton structure. In synthesising the manganese complex, we obtained an unexpected dithiolate thiosemicarbazone tosyl ligand, H2L2, as a side-product, which has been fully characterised, including by X-ray diffraction analysis. In the case of copper, the solid complex has the formula [CuL1]2, but the crystallised product shows the copper atoms coordinated to a new cyclised thiosemicarbazone ligand, H2L3, as in the structures of the complexes [Cu(L3)]2.CH3CN (8) and [Cu(L3)(H2O)]2.CH3CN.H2O (9). The zinc complex [Zn(L1)]4 (12) displays a particular tetranuclear zeolite-type structure capable of hosting small molecules or ions, presumably through hydrogen bonding.

Novel peroxidase mimics: μ-Aqua manganese–Schiff base dimers

The interaction of manganese(II) carboxylate salts [Mn(O(2)CR)(2), where R=ethane, pentane] with H(2)L(1) [N,N'-bis(3-methoxy-2-hydroxybenzaldehyde)-1,2-phenylenediamine] and H(2)L(2) [N,N'-bis(3-ethoxy-2-hydroxybenzaldehyde)-1,2-phenylenediamine] was studied. MnL(1)(O(2)CEt)(H(2)O) (1), MnL(1)(O(2)CPe(n))(H(2)O) (2), MnL(2)(O(2)CEt)(H(2)O)(2) (3) and MnL(2)(O(2)CPe(n))(H(2)O)(2) (4) were isolated and thoroughly characterised by elemental analysis, FAB mass spectrometry, infrared and (1)H NMR spectroscopy, magnetic susceptibility measurements, molar conductivities, and cyclic and normal pulse voltammetry. Compounds 1 and 2 were crystallographically characterised revealing a tetragonally elongated octahedral geometry for the manganese coordination sphere and also a dimeric nature through mu-aqua bridges. Complexes 1-4 behave as efficient peroxidase mimics in the presence of the water-soluble trap ABTS, probably due to their ease to coordinate the substrate molecule. A correlation between rhombicity of the complexes and peroxidase activity has also been established.

Influence of the metal size in the structure of the complexes derived from a pentadentate [N3O2] hydrazone

The influence of the metal size in the nuclearity of the complexes derived from the hydrazone ligand 2,6-bis(1-salicyloylhydrazonoethyl)pyridine [H(4)daps] has been investigated. We have synthesised a series of new complexes [M(H(x)daps)] x yH(2)O, (x = 2,3; y = 0-3) with M = Ag (1), Cd (2), Al (3), Sn (4) and Pb (6), using an electrochemical procedure. The crystal and molecular structures have been determined for the mononuclear complexes [Sn(H(2)daps)(H(2)O)(2)] x 4H(2)O (5) and [Pb(H(2)daps)(CN)][Et(4)N] (7). Complex is the first neutral Sn(II) complex derived from a pentadentate hydrazone Schiff base ligand. Complex shows the lead coordinated to the hydrazone donor set and a cyanide ligand, being the first reported complex with the lead atom coordinated to a monodentate cyanide group. Additionally, we have synthesised the lead complex using chemical conditions, in the presence of sodium cyanide which allowed us to isolate the neutral complex [Pb(H(2)daps)] (8). Evaporation of these mother liquors led the novel compound [Pb(Hdaphs)(CH(3)COO)] (9). Complex 9 shows the initial ligand hydrolysed in one of the imine bonds giving rise to a new tetradentate ligand [H(2)daphs] coordinated to the lead atom and a bidentate acetate group. Moreover, the solution behaviour of the complexes has been investigated by (1)H, (113)Cd, (117)Sn and (207)Pb NMR techniques. In particular multinuclear NMR has provided new useful data to correlate factors such as oxidation state, coordination number and nature of the kernel donor atoms due to the new coordination found in complexes 5 and 7. The comparative study of the structures of the complexes derived from this pentadentate [N(3)O(2)] hydrazone ligand let us to conclude that the metal size is a key factor to control the nuclearity of the complexes derived from the ligand [H(4)daps].

A comparative study of the physicochemical properties of perfluorinated and hydrogenated amphiphiles

In this work we studied and compared the physicochemical properties of perfluorinated (sodium perfluoroheptanoate, C7FONa, and perfluorooctanoate, C8FONa) and hydrogenated (sodium octanoate, C8HONa, decanoate, C10HONa, and dodecanoate, C12HONa) amphiphiles. First, we determined their Krafft points to study the solubility and appropriate temperature range of micellization of these compounds. The critical micelle concentration (cmc) and ionization degree of micellization (beta) as a function of temperature (T) were estimated from conductivity data. Plots of cmc vs T appear to follow the typical U-shaped curve with a minimum T(min). The results show that the surfactants with CF2/CH2 ratio of 1.5 between alkyl chains (C12HONa-C8FONa and C10HONa-C7FONa) have nearly the same minimum value for cmc against temperature. The comparison between the cmc of hydrogenated amphiphiles and the corresponding perfluorinated amphiphiles must be done at this point. Thermodynamic functions of micellization were obtained by applying different theoretical models and choosing the one that best fit our experimental data. Although perfluorinated and hydrogenated amphiphiles present similar thermodynamic behavior, we have found a variation of 1.3 to 1.7 in the CF2/CH2 ratio, which did not remain constant with temperature. In the second part of this study the apparent molar volumes and adiabatic compressibilities were determined from density and ultrasound velocity measurements. Apparent molar volumes at infinite dilution presented the ratio 1.5 between alkyl chains again. However, apparent molar volumes upon micellization for sodium perfluoroheptanoate indicated a different aggregation pattern.

Syntheses and X-ray characterization of metal complexes with the pentadentate thiosemicarbazone ligand bis(4-N-methylthiosemicarbazone)-2,6-diacetylpyridine. The first pentacoordinate lead(II) complex with a pentagonal geometry

In this paper we describe the electrochemical synthesis and characterization of new neutral manganese, iron, cobalt, nickel, copper, zinc, cadmium and lead complexes with the ligand bis(4-N-methylthiosemicarbazone)-2,6-diacetylpyridine, H4DAPTsz-Me. X-Ray structures of [Mn(H2DAPTsz-Me)(EtOH)2] 1, [Pb(H2DAPTsz-Me)] 3 and [Zn(H2DAPTsz-Me)]2.EtOH.2H2O 4, were also determined. In these complexes the ligand behaves as bis-deprotonated and SNNNS pentadentate. In the manganese complex the metal is heptacoordinated, in a distorted pentagonal-bipyramidal environment, with the N3S2 donor set of the ligand in the pentagonal girdle and two solvent molecules occupying the axial positions. In the lead complex 3 the metal is pentacoordinated, bound exclusively to the five donor atoms of the ligand, as a consequence of the existence of "inert pair effect". The bishelical zinc complex 4 shows each zinc atom with different coordination geometry, one octahedrally six-coordinate while the other is distorted tetrahedrally four-coordinate.