Breakup of finite-size liquid filaments: Transition from no-breakup to breakup including substrate effects⋆

This work studies the breakup of finite-size liquid filaments, when also including substrate effects, using direct numerical simulations. The study focuses on the effects of three parameters: Ohnesorge number, the ratio of the viscous forces to inertial and surface tension forces, the liquid filament aspect ratio, and where there is a substrate, a measure of the fluid slip on the substrate, i.e. slip length. Through these parameters, it is determined whether a liquid filament breaks up during the evolution toward its final equilibrium state. Three scenarios are identified: a collapse into a single droplet, the breakup into one or multiple droplets, and recoalescence into a single droplet after the breakup (or even possibly another breakup after recoalescence). The results are compared with the ones available in the literature for free-standing liquid filaments. The findings show that the presence of the substrate promotes the breakup of the filament. The effect of the degree of slip on the breakup is also discussed. The parameter domain regions are comprehensively explored when including the slip effects. An experimental case is also carried out to illustrate the collapse and breakup of a finite-size silicon oil filament supported on a substrate, showcasing a critical length of the breakup in a physical configuration. Finally, direct numerical simulations reveal striking new details into the breakup pattern for low Ohnesorge numbers, where the dynamics are fast and the experimental imaging is not available; our results therefore significantly extend the range of Ohnesorge number over which filament breakup has been considered.

Exploiting the Marangoni Effect To Initiate Instabilities and Direct the Assembly of Liquid Metal Filaments

Utilization of the Marangoni effect in a liquid metal is investigated, focusing on initiating instabilities to direct material assembly via the Rayleigh-Plateau instability. Thin (2 nm) copper (Cu) films are lithographically patterned onto thick (12 nm) nickel (Ni) strips to induce a surface energy gradient at the maximum wavelength of the filament instability predicted by Rayleigh-Plateau instability analysis. The pattern is irradiated with an 18 ns pulsed laser such that the pattern melts and the resultant Ni-Cu surface tension gradient induces Marangoni flows due to the difference in surface energies. The experimental results, supported by extensive direct numerical simulations, demonstrate that the Marangoni flow exceeds the capillary flow induced by the initial geometry, guiding instabilities such that final nanoparticle location is directed toward the regions of higher surface energy (Ni regions). Our work shows a route for manipulation, by means of the Marangoni effect, to direct the evolution of the surface instabilities and the resulting pattern formation.

Instability of Nano- and Microscale Liquid Metal Filaments: Transition from Single Droplet Collapse to Multidroplet Breakup

We carry out experimental and numerical studies to investigate the collapse and breakup of finite size, nano- and microscale, liquid metal filaments supported on a substrate. We find the critical dimensions below which filaments do not break up but rather collapse to a single droplet. The transition from collapse to breakup can be described as a competition between two fluid dynamic phenomena: the capillary driven end retraction and the Rayleigh-Plateau type instability mechanism that drives the breakup. We focus on the unique spatial and temporal transition region between these two phenomena using patterned metallic thin film strips and pulsed-laser-induced dewetting. The experimental results are compared to an analytical model proposed by Driessen et al. and modified to include substrate interactions. In addition, we report the results of numerical simulations based on a volume-of-fluid method to provide additional insight and highlight the importance of liquid metal resolidification, which reduces inertial effects.

Novel chimpanzee adenovirus-vectored respiratory mucosal tuberculosis vaccine: overcoming local anti-human adenovirus immunity for potent TB protection

Pulmonary tuberculosis (TB) remains to be a major global health problem despite many decades of parenteral use of Bacillus Calmette-Guérin (BCG) vaccine. Developing safe and effective respiratory mucosal TB vaccines represents a unique challenge. Over the past decade or so, the human serotype 5 adenovirus (AdHu5)-based TB vaccine has emerged as one of the most promising candidates based on a plethora of preclinical and early clinical studies. However, anti-AdHu5 immunity widely present in the lung of humans poses a serious gap and limitation to its real-world applications. In this study we have developed a novel chimpanzee adenovirus 68 (AdCh68)-vectored TB vaccine amenable to the respiratory route of vaccination. We have evaluated AdCh68-based TB vaccine for its safety, T-cell immunogenicity, and protective efficacy in relevant animal models of human pulmonary TB with or without parenteral BCG priming. We have also compared AdCh68-based TB vaccine with its AdHu5 counterpart in both naive animals and those with preexisting anti-AdHu5 immunity in the lung. We provide compelling evidence that AdCh68-based TB vaccine is not only safe when delivered to the respiratory tract but, importantly, is also superior to its AdHu5 counterpart in induction of T-cell responses and immune protection, and limiting lung immunopathology in the presence of preexisting anti-AdHu5 immunity in the lung. Our findings thus suggest AdCh68-based TB vaccine to be an ideal candidate for respiratory mucosal immunization, endorsing its further clinical development in humans.

Hierarchical nanoparticle ensembles synthesized by liquid phase directed self-assembly

A liquid metal filament supported on a dielectric substrate was directed to fragment into an ordered, mesoscale particle ensemble. Imposing an undulated surface perturbation on the filament forced the development of a single unstable mode from the otherwise disperse, multimodal Rayleigh-Plateau instability. The imposed mode paved the way for a hierarchical spatial fragmentation of the filament into particles, previously seen only at much larger scales. Ultimately, nanoparticle radius control is demonstrated using a micrometer scale switch.

Numerical simulation of ejected molten metal nanoparticles liquified by laser irradiation: interplay of geometry and dewetting

Metallic nanoparticles, liquified by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approach to accurately model the process of liquid nanodrop formation and the subsequent ejection from the substrate. Our computations show a significant role of inertial effects and an elaborate interplay of initial geometry and wetting properties: e.g., we can control the direction of ejection by prescribing appropriate initial shape and/or wetting properties. The basic insight regarding ejection itself can be reached by considering a simple effective model based on an energy balance. We validate our computations by comparing directly with the experiments specified above involving the length scales measured in hundreds of nanometers and with molecular dynamics simulations on much shorter scales measured in tens of atomic diameters, as by M. Fuentes-Cabrera et al. [Phys. Rev. E 83, 041603 (2011)]. The quantitative agreement, in addition to illustrating how to control particle ejection, shows utility of continuum-based simulation in describing dynamics on nanoscale quantitatively, even in a complex setting as considered here.

Obstructed breakup of slender drops in a microfluidic T junction

In this Letter we present a theoretical analysis of the droplet breakup with "permanent obstruction" in a microfluidic T junction [M.-C. Jullien et al., Phys. Fluids 21, 072001 (2009)]. The proposed theory is based on a simple geometric construction for the interface shape combined with Tanner's law for the local contact angle. The resulting scaling of the droplet deformation with time and capillary number is in excellent agreement with the results of direct numerical simulations and prior experiments. More rigorous analysis based on the lubrication approximation reveals a self-similar behavior analogous to the classical problem of a droplet spreading over a preexisting liquid film.

[Fatal hydatid pulmonary embolism during hepatectomy for hydatid cyst. Apropos of a case]

Liver Hydatid cysts located close to the inferior vena cava and the sus-hepatic veins are known for their risk of rupture inside these veins. The authors report the case of a patient who died from massive pulmonary embolism during the surgical treatment (hepatectomy) of liver hydatid cysts. Diagnosis and treatment of these fistula are reviewed.