Radiotherapy Dose as a Predictor of Outcomes Following Cardiac Radioablation for High-risk Refractory VT

PURPOSE/OBJECTIVE(S)

Cardiac radioablation (CRA) is an emerging treatment for high-risk refractory ventricular tachycardia (VT). Despite a fixed prescription dose to the planning target volume (PTV) there is still considerable heterogeneity in the radiotherapy dose distribution due to planning technique, proximity to organs at risk, and radiation oncologist preference. The hypothesis is that plans with an inherently "hotter" internal dose to the PTV may lead to improved VT outcomes.

MATERIALS/METHODS

Single-center, IRB-approved retrospective case series of patients with refractory VT who had failed at least one prior CA (or were unfit for CA) treated with CRA. All patients were treated with a single fraction of 25 Gy prescribed to the PTV. Maximum dose to PTV was collected from each plan and stratified as high vs low above and below the median. Maximum dose was defined as the highest dose delivered to the "hottest" 0.035 cc of the PTV to avoid known variability in reporting of dose to single voxels within the treatment planning system. Rates of survival (OS), freedom from shock and/or storm (FFSS), and freedom from death, shock, and/or storm (FFDSS) were collected, and stratified by maximum dose to the PTV. Formal statistical comparisons were not performed due to limited patient numbers.

RESULTS

From 2015-2020, 22 patients were treated with CRA (18 with prior CA, 4 unfit for CA) for high-risk refractory VT. Median age was 64.5 years (range, 49-84), and 90.9% were male. 50% had ICM, with a median NYHA class of 3 (range, 1-4) and median EF of 25% (range, 15-58%). Median follow-up was 31.3 months. 2-year OS was 54.5%, FFSS was 42.4%, and FFDSS was 27.3%. Median maximum dose to the PTV was 42.2 Gy (range, 29.2-45.8 Gy). PTV maximum dose (high vs low) discriminated 2-year OS (63.6% vs 45.5%), FFSS (50% vs 30%) and FFDSS (36.4% vs 18.2%). For all endpoints, Kaplan-Meier curves overlapped for the first 6 months, and then diverged.

CONCLUSION

In patients with high-risk refractory VT treated with CRA, survival and VT outcomes were similar between both groups out to 6 months, with improved OS and VT control noted after that with higher maximum doses. With a prescription dose of 25 Gy to the PTV, adjusting planning parameters to maintain maximum doses > 42 Gy may improve durable outcomes and requires validation in a larger cohort.

Synchronized high-speed scintillation imaging of proton beams, generated by a gantry-mounted synchrocyclotron, on a pulse-by-pulse basis

BACKGROUND

With the emergence of more complex and novel proton delivery techniques, there is a need for quality assurance (QA) tools with high spatiotemporal resolution to conveniently measure the spatial and temporal properties of the beam. In this context, scintillation-based dosimeters, if synchronized with the radiation beam and corrected for ionization quenching, are appealing.

PURPOSE

To develop a synchronized high-speed scintillation imaging system for characterization and verification of the proton therapy beams on a pulse-by-pulse basis.

MATERIALS AND METHODS

A 30 cm × 30 cm × 5 cm block of BC-408 plastic scintillator placed in a light-tight housing was irradiated by proton beams generated by a Mevion S250^TM proton therapy synchrocyclotron. A high-speed camera system, placed perpendicular to the beam direction and facing the scintillator, was synchronized to the accelerator's pulses to capture images. Opening and closing of the camera's shutter was controlled by setting a proper time delay and exposure time, respectively. The scintillation signal was recorded as a set of two-dimensional (2D) images. Empirical correction factors were applied to the images to correct for the non-uniformity of the pixel sensitivity and quenching of the scintillator. Proton range and modulation were obtained from the corrected images.

RESULTS

The camera system was able to capture all data on a pulse-by-pulse basis at a rate of ∼504 frames per second. The applied empirical correction method for ionization quenching was effective and the corrected composite image provided a 2D map of dose distribution. The measured range (depth of distal 90%) through scintillation imaging agreed within 1.2 mm with that obtained from ionization chamber measurement.

CONCLUSION

A high-speed camera system capable of capturing scintillation signals from individual proton pulses was developed. The scintillation imaging system is promising for rapid proton beam characterization and verification. This article is protected by copyright. All rights reserved.

Feasibility of Same-Day Prostate Fiducial Markers, Perirectal Hydrogel Spacer Placement, and Computed Tomography and Magnetic Resonance Imaging Simulation for External Beam Radiation Therapy for Low-Risk and Intermediate-Risk Prostate Cancer

PURPOSE

The use of prostate fiducial markers and perirectal hydrogel spacers can reduce the acute and late toxic effects associated with prostate radiation therapy. These procedures are usually performed days to weeks before simulation during a separate clinic visit to ensure resolution of procedure-related inflammation. The purpose of this study was to assess whether same-day intraprostatic fiducial marker placement, perirectal hydrogel injection, and computed tomography (CT) and magnetic resonance imaging (MRI) simulation were feasible without adversely affecting hydrogel volume, perirectal spacing, or rectal dose. If feasible, performing these procedures on the same day as simulation would expedite the start of radiation therapy, improve patient convenience, and reduce costs.

METHODS AND MATERIALS

Twenty-one patients with clinically localized prostate cancer who were enrolled on a prospective clinical trial (NCT01617161) underwent same-day marker placement, hydrogel injection, and CT and MRI simulation, then underwent T2 MRI verification scans 3 to 4 weeks later. The MRI scans were fused to the CT planning scans by clinical target volumes (CTVs) to generate comparison treatment plans (70 Gy in 28 fractions). Hydrogel volume and symmetry, perirectal spacing, CTV dose, and organ-at-risk dose were evaluated.

RESULTS

Verification scans occurred a mean of 24.9 ± 4.6 days after simulation and 9.3 ± 4.9 days after treatment start. Prostate volume did not change between scans (median, 67.3 ± 22.1 cm³ vs 64.1 ± 21.8 cm³; P = .64). The median hydrogel change between simulation and verification was ^-1.8% ± 4.5% (P = .27). No significant differences in perirectal spacing (midgland: 1.33 ± 0.45 cm vs 1.3 ± 0.7 cm; 1 cm superior: 1.25 ± 0.95 cm vs 1.43 ± 0.91 cm; 1 cm inferior: 1.16 ± 0.28 cm vs 1.41 ± 0.49 cm) were identified. No significant differences in rectal V66 (median 2.3 ± 2.18% vs 2.3 ± 2.28%; P = .99), V35 (median 14.79 ± 7.61 vs 14.67 ± 8.4; P = .73), or D1cc (65.7 ± 9.2 Gy vs 68.2 ± 9.0 Gy; P = .80) were found. All plans met CTV and organ-at-risk constraints.

CONCLUSION

Same-day placement of intraprostatic fiducial markers, perirectal hydrogel, and simulation scans was feasible and did not significantly affect hydrogel volume, position, CTV coverage, or rectal dose.

Technical Note: Self-shielding evaluation and radiation leakage measurement of a jawless ring gantry linac with a beam stopper

PURPOSE

To characterize the shielding design and leakage radiation from a newly released ring gantry linac (Halcyon, Varian Medical Systems).

METHODS

To assess the radiation leakage surrounding headshield and the radiation level after the beam stopper, measurements were made with GafChromic films. To evaluate the in-room radiation levels, the radiation leakage in the isocenter plane was measured with a large volume spherical ionization chamber (Exradin A6, Standard Imaging). A lead enclosure was constructed to shield the chamber from the low energy scatter radiation from the room. The radiation level at multiple locations was measured with the MLC fully closed and gantry at 0, 45, 90, 135, 180, 225, 270, and 315 degrees. The leakage radiation passing through multiple concrete slabs with various thickness was recorded in a narrow beam geometry to determine the tenth value layer (TVL).

RESULTS

A uniform leakage (<0.05%) at 1 m from electron beam line was measured surrounding the linac head with the maximum leakage measured at the top of the head enclosure. The highest radiation level (<0.08%) was measured near the edge of the beam stopper when projected to the measurement plane. The maximum radiation levels due to the head leakage at 15 locations inside the treatment room were recorded and a radiation map was plotted. The maximum leakage was measured at points that along the electron beam line while the gantry at 90 or 270 degree and at the end of head enclosure (0.314%, 0.4 m from electron beamline). The leakage TVL value is found to be 226 mm in a narrow beam geometry with the concrete density of 2.16 g/cm³ or 134.6 lb/cu.ft.

CONCLUSION

An overall uniform leakage was measured surrounding linac head. The beam stopper shields the primary radiation with the highest valued measured near the edge of beam stopper. The leakage TVL values are derived and less than the values reported for conventional C-arm linac.

Internal dose escalation associated with increased local control for melanoma brain metastases treated with stereotactic radiosurgery

OBJECTIVE

The internal high-dose volume varies widely for a given prescribed dose during stereotactic radiosurgery (SRS) to treat brain metastases (BMs). This may be altered during treatment planning, and the authors have previously shown that this improves local control (LC) for non-small cell lung cancer BMs without increasing toxicity. Here, they seek to identify potentially actionable dosimetric predictors of LC after SRS for melanoma BM.

METHODS

The records of patients with unresected melanoma BM treated with single-fraction Gamma Knife RS between 2006 and 2017 were reviewed. LC was assessed on a per-lesion basis, defined as stability or a decrease in lesion size. Outcome-oriented approaches were utilized to determine optimal dichotomization for dosimetric variables relative to LC. Univariable and multivariable Cox regression analysis was implemented to evaluate the impact of collected parameters on LC.

RESULTS

Two hundred eighty-seven melanoma BMs in 79 patients were identified. The median age was 56 years (range 31-86 years). The median follow-up was 7.6 months (range 0.5-81.6 months), and the median survival was 9.3 months (range 1.3-81.6 months). Lesions were optimally stratified by volume receiving at least 30 Gy (V30) greater than or equal to versus less than 25%. V30 was ≥ and < 25% in 147 and 140 lesions, respectively. For all patients, 1-year LC was 83% versus 66% for V30 ≥ and < 25%, respectively (p = 0.001). Stratifying by volume, lesions 2 cm or less (n = 215) had 1-year LC of 82% versus 70% (p = 0.013) for V30 ≥ and < 25%, respectively. Lesions > 2 to 3 cm (n = 32) had 1-year LC of 100% versus 43% (p = 0.214) for V30 ≥ and < 25%, respectively. V30 was still predictive of LC even after controlling for the use of immunotherapy and targeted therapy. Radionecrosis occurred in 2.8% of lesions and was not significantly associated with V30.

CONCLUSIONS

For a given prescription dose, an increased internal high-dose volume, as indicated by measures such as V30 ≥ 25%, is associated with improved LC but not increased toxicity in single-fraction SRS for melanoma BM. Internal dose escalation is an independent predictor of improved LC even in patients receiving immunotherapy and/or targeted therapy. This represents a dosimetric parameter that is actionable at the time of treatment planning and warrants further evaluation.

Filmless quality assurance of a Leksell Gamma Knife® Icon™

PURPOSE

The annual quality assurance (QA) of Leksell Gamma Knife^® (LGK) systems are typically performed using films. Film is a good candidate for small field dosimetry due to its high spatial resolution and availability. However, there are multiple challenges with using film; film does not provide real-time measurement and requires batch-specific calibration. Our findings show that active detector-based QA can simplify the procedure and save time without loss of accuracy.

METHODS

Annual QA tests for a LGK Icon™ system were performed using both film-based and filmless techniques. Output calibration, relative output factors (ROF), radiation profiles, sector uniformity/source counting, and verification of the unit center point (UCP) and radiation focal point (RFP) coincidence tests were performed. Radiochromic films, two ionization chambers, and a synthetic diamond detector were used for the measurements. Results were compared and verified with the treatment planning system (TPS).

RESULTS

The measured dose rate of the LGK Icon was within 0.4% of the TPS value set at the time of commissioning using an ionization chamber. ROF for the 8 and 4-mm collimators were found to be 0.3% and 1.8% different from TPS values using the MicroDiamond detector and 2.6% and 1.9% different for film, respectively. Excellent agreement was found between TPS and measured dose profiles using the MicroDiamond detector which was within 1%/1 mm vs 2%/1 mm for film. Sector uniformity was found to be within 1% for all eight sectors measured using an ionization chamber. Verification of UCP and RFP coincidence using the MicroDiamond detector and pinprick film test was within 0.3 mm at isocenter for both.

CONCLUSION

The annual QA of a LGK Icon was successfully performed by employing filmless techniques. Comparable results were obtained using radiochromic films. Utilizing active detectors instead of films simplifies the QA process and saves time without loss of accuracy.

Evaluation of a new secondary dose calculation software for Gamma Knife radiosurgery

Current available secondary dose calculation software for Gamma Knife radiosurgery falls short in situations where the target is shallow in depth or when the patient is positioned with a gamma angle other than 90°. In this work, we evaluate a new secondary calculation software which utilizes an innovative method to handle nonstandard gamma angles and image thresholding to render the skull for dose calculation. 800 treatment targets previously treated with our GammaKnife Icon system were imported from our treatment planning system (GammaPlan 11.0.3) and a secondary dose calculation was conducted. The agreement between the new calculations and the TPS were recorded and compared to the original secondary dose calculation agreement with the TPS using a Wilcoxon Signed Rank Test. Further comparisons using a Mann‐Whitney test were made for targets treated at a 90° gamma angle against those treated with either a 70 or 110 gamma angle for both the new and commercial secondary dose calculation systems. Correlations between dose deviations from the treatment planning system against average target depth were evaluated using a Kendall’s Tau correlation test for both programs. The Wilcoxon Signed Rank Test indicated a significant difference in the agreement between the two secondary calculations and the TPS, with a P‐value < 0.0001. With respect to patients treated at nonstandard gamma angles, the new software was largely independent of patient setup, while the commercial software showed a significant dependence (P‐value < 0.0001). The new secondary dose calculation software showed a moderate correlation with calculation depth, while the commercial software showed a weak correlation (Tau = −.322 and Tau = −.217 respectively). Overall, the new secondary software has better agreement with the TPS than the commercially available secondary calculation software over a range of diverse treatment geometries.

Phase I/II Trial of Electrophysiology-Guided Noninvasive Cardiac Radioablation for Ventricular Tachycardia

BACKGROUND

Case studies have suggested the efficacy of catheter-free, electrophysiology-guided noninvasive cardiac radioablation for ventricular tachycardia (VT) using stereotactic body radiation therapy, although prospective data are lacking.

METHODS

We conducted a prospective phase I/II trial of noninvasive cardiac radioablation in adults with treatment-refractory episodes of VT or cardiomyopathy related to premature ventricular contractions (PVCs). Arrhythmogenic scar regions were targeted by combining noninvasive anatomic and electric cardiac imaging with a standard stereotactic body radiation therapy workflow followed by delivery of a single fraction of 25 Gy to the target. The primary safety end point was treatment-related serious adverse events in the first 90 days. The primary efficacy end point was any reduction in VT episodes (tracked by indwelling implantable cardioverter defibrillators) or any reduction in PVC burden (as measured by a 24-hour Holter monitor) comparing the 6 months before and after treatment (with a 6-week blanking window after treatment). Health-related quality of life was assessed using the Short Form-36 questionnaire.

RESULTS

Nineteen patients were enrolled (17 for VT, 2 for PVC cardiomyopathy). Median noninvasive ablation time was 15.3 minutes (range, 5.4-32.3). In the first 90 days, 2/19 patients (10.5%) developed a treatment-related serious adverse event. The median number of VT episodes was reduced from 119 (range, 4-292) to 3 (range, 0-31; P<0.001). Reduction was observed for both implantable cardioverter defibrillator shocks and antitachycardia pacing. VT episodes or PVC burden were reduced in 17/18 evaluable patients (94%). The frequency of VT episodes or PVC burden was reduced by 75% in 89% of patients. Overall survival was 89% at 6 months and 72% at 12 months. Use of dual antiarrhythmic medications decreased from 59% to 12% ( P=0.008). Quality of life improved in 5 of 9 Short Form-36 domains at 6 months.

CONCLUSIONS

Noninvasive electrophysiology-guided cardiac radioablation is associated with markedly reduced ventricular arrhythmia burden with modest short-term risks, reduction in antiarrhythmic drug use, and improvement in quality of life.

CLINICAL TRIAL REGISTRATION

URL: https://www.clinicaltrials.gov/ . Unique identifier: NCT02919618.

Characterization and validation of an intra-fraction motion management system for masked-based radiosurgery

Purpose

Characterize the intra‐fraction motion management (IFMM) system found on the Gamma Knife Icon (GKI), including spatial accuracy, latency, temporal performance, and overall effect on delivered dose.

Methods

A phantom was constructed, consisting of a three‐axis translation mount, a remote motorized flipper, and a thermoplastic sphere surrounding a radiation detector. An infrared marker was placed on the translation mount secured to the flipper. The spatial accuracy of the IFMM was measured via the translation mount in all Cartesian planes. The detector was centered at the radiation focal point. A remote signal was used to move the marker out of the IFMM tolerance and pause the beam. A two‐channel electrometer was used to record the signals from the detector and the flipper when motion was signaled. These signals determined the latency and temporal performance of the GKI.

Results

The spatial accuracy of the IFMM was found to be <0.1 mm. The measured latency was <200 ms. The dose difference with five interruptions was <0.5%.

Conclusion

This work provides a quantitative characterization of the GKI IFMM system as required by the Nuclear Regulatory Commission. This provides a methodology for GKI users to satisfy these requirements using common laboratory equipment in lieu of a commercial solution.

Validation of post-treatment PET-based dosimetry software for hepatic radioembolization of Yttrium-90 microspheres

PURPOSE

Yttrium-90 (⁹⁰ Y) microsphere radioembolization enables selective internal radiotherapy for hepatic malignancies. Currently, there is no standard postdelivery imaging and dosimetry of the microsphere distribution to verify treatment. Recent studies have reported utilizing the small positron yield of ⁹⁰ Y (32 ppm) with positron emission tomography (PET) to perform treatment verification and dosimetry analysis. In this study, we validated a commercial dosimetry software, MIM SurePlan™ LiverY90 (MIM Software Inc., Cleveland, OH), for clinical use.

METHODS

A MATLAB-based algorithm for ⁹⁰ Y PET-based dosimetry was developed in-house and validated for the purpose of commissioning the commercial software. The algorithm is based on voxel S values and dosimetry formalism reported in MIRD Pamphlet 17. We validated the in-house algorithm to establish it as the ground truth by comparing results from a digital point phantom and a digital uniform cylinder to manual calculations. Once we validated our in-house MATLAB-based algorithm, we used it to perform acceptance testing and commissioning of the commercial dosimetry software, MIM SurePlan, which uses the same dosimetry formalism. A 0.4 cm/5% gamma test was performed on PET-derived dose maps from each algorithm of uniform digital and nonuniform physical phantoms filled with ⁹⁰ Y chloride solution. Average dose (D_avg ) and minimum dose to 70% (D₇₀ ) of a given volume of interest (VOI) were compared for the digital phantom, the physical phantom, and five patient cases (27 tumor VOIs), representing different clinical scenarios.

RESULTS

The gamma-pass rates were 97.26% and 97.66% for the digital and physical phantoms, respectively. The differences between D_avg and D₇₀ were 0.076% and 0.10% for the digital phantom, respectively, and <5.2% for various VOIs in the physical phantom. In the clinical cases, 96.3% of the VOIs had a difference <5% for D_avg , and 88.9% of the VOIs had a difference <5% for D₇₀ .

CONCLUSIONS

Dose calculation results from MIM SurePlan were found to be in good agreement with our in-house algorithm. This indicates that MIM SurePlan performs as it should and, hence, can be deemed accepted and commissioned for clinical use for post-implant PET-based dosimetry of ⁹⁰ Y radioembolization.

First clinical implementation of real-time, real anatomy tracking and radiation beam control

PURPOSE

We describe the acceptance testing, commissioning, periodic quality assurance, and workflow procedures developed for the first clinically implemented magnetic resonance imaging-guided radiation therapy (MR-IGRT) system for real-time tracking and beam control.

METHODS

The system utilizes real-time cine imaging capabilities at 4 frames per second for real-time tracking and beam control. Testing of the system was performed using an in-house developed motion platform and a commercially available motion phantom. Anatomical tracking is performed by first identifying a target (a region of interest that is either tissue to be treated or a critical structure) and generating a contour around it. A boundary contour is also created to identify tracking margins. The tracking algorithm deforms the anatomical contour (target or a normal organ) on every subsequent cine frame and compares it to the static boundary contour. If the anatomy of interest moves outside the boundary, the radiation delivery is halted until the tracked anatomy returns to treatment portal. The following were performed to validate and clinically implement the system: (a) spatial integrity evaluation; (b) tracking accuracy; (c) latency; (d) relative point dose and spatial dosimetry; (e) development of clinical workflow for gating; and (f) independent verification by an outside credentialing service.

RESULTS

The spatial integrity of the MR system was found to be within 2 mm over a 45-cm diameter field-of-view. The tracking accuracy for geometric targets was within 1.2 mm. The average system latency was measured to be within 394 ms. The dosimetric accuracy using ionization chambers was within 1.3% ± 1.7%, and the dosimetric spatial accuracy was within 2 mm. The phantom irradiation for the outside credentialing service had satisfactory results, as well.

CONCLUSIONS

The first clinical MR-IGRT system was validated for real-time tracking and gating capabilities and shown to be reliable and accurate. Patient workflow methods were developed for efficient treatment. Periodic quality assurance tests can be efficiently performed with commercially available equipment to ensure accurate system performance.

Normalize the response of EPID in pursuit of linear accelerator dosimetry standardization

Normalize the response of electronic portal imaging device (EPID) is the first step toward an EPID‐based standardization of Linear Accelerator (linac) dosimetry quality assurance. In this study, we described an approach to generate two‐dimensional (2D) pixel sensitivity maps (PSM) for EPIDs response normalization utilizing an alternative beam and dark‐field (ABDF) image acquisition technique and large overlapping field irradiations. The automated image acquisition was performed by XML‐controlled machine operation and the PSM was generated based on a recursive calculation algorithm for Varian linacs equipped with aS1000 and aS1200 imager panels. Cross‐comparisons of normalized beam profiles and 1.5%/1.5 mm 1D Gamma analysis was adopted to quantify the improvement of beam profile matching before and after PSM corrections. PSMs were derived for both photon (6, 10, 15 MV) and electron (6, 20 MeV) beams via proposed method. The PSM‐corrected images reproduced a horn‐shaped profile for photon beams and a relative uniform profiles for electrons. For dosimetrically matched linacs equipped with aS1000 panels, PSM‐corrected images showed increased 1D‐Gamma passing rates for all energies, with an average 10.5% improvement for crossline and 37% for inline beam profiles. Similar improvements in the phantom study were observed with a maximum improvement of 32% for 15 MV and 22% for 20 MeV. The PSM value showed no significant change for all energies over a 3‐month period. In conclusion, the proposed approach correct EPID response for both aS1000 and aS1200 panels. This strategy enables the possibility to standardize linac dosimetry QA and to benchmark linac performance utilizing EPID as the common detector.

Rapid acceptance testing of modern linac using on-board MV and kV imaging systems

PURPOSE

The purpose of this study was to develop a novel process for using on-board MV and kV Electronic Portal Imaging Devices (EPIDs) to perform linac acceptance testing (AT) for two reasons: (a) to standardize the assessment of new equipment performance, and (b) to reduce the time to clinical use while reducing physicist workload.

METHODS AND MATERIALS

In this study, Varian TrueBeam linacs equipped with amorphous silicon-based EPID (aS1000) were used. The conventional set of AT tests and tolerances were used as a baseline guide. A novel methodology was developed or adopted from published literature to perform as many tests as possible using the MV and kV EPIDs. The developer mode on Varian TrueBeam linacs was used to automate the process. In the EPID-based approach, most of mechanical tests were conducted by acquiring images through a custom phantom and software tools were developed for quantitative analysis to extract different performance parameters. The embedded steel-spheres in a custom phantom provided both visual and radiographic guidance for beam geometry testing. For photon beams, open field EPID images were used to extract inline/crossline profiles to verify the beam energy, flatness and symmetry. EPID images through a double wedge phantom were used for evaluating electron beam properties via diagonal profile. Testing was augmented with a commercial automated application (Machine Performance Check) which was used to perform several geometric accuracy tests such as gantry, collimator rotations, and couch rotations/translations.

RESULTS

The developed process demonstrated that the tests, which required customer demonstration, were efficiently performed using EPIDs. The AT tests that were performed using EPIDs were fully automated using the developer mode on the Varian TrueBeam system, while some tests, such as the light field versus radiation field congruence, and collision interlock checks required user interaction.

CONCLUSIONS

On-board imagers are quite suitable for both geometric and dosimetric testing of linac system involved in AT. Electronic format of the acquired data lends itself to benchmarking, transparency, as well as longitudinal use of AT data. While the tests were performed on a specific model of a linear accelerator, the proposed approach can be extended to other linacs.

Process improvement for the safe delivery of multidisciplinary-executed treatments-A case in Y-90 microspheres therapy

PURPOSE

To develop a safe and robust workflow for yttrium-90 (Y-90) radioembolization procedures in a multidisciplinary team environment.

METHODS AND MATERIALS

A generalized Define-Measure-Analyze-Improve-Control (DMAIC)-based approach to process improvement was applied to a Y-90 radioembolization workflow. In the first DMAIC cycle, events with the Y-90 workflow were defined and analyzed. To improve the workflow, a web-based interactive electronic white board (EWB) system was adopted as the central communication platform and information processing hub. The EWB-based Y-90 workflow then underwent a second DMAIC cycle. Out of 245 treatments, three misses that went undetected until treatment initiation were recorded over a period of 21 months, and root-cause-analysis was performed to determine causes of each incident and opportunities for improvement. The EWB-based Y-90 process was further improved via new rules to define reliable sources of information as inputs into the planning process, as well as new check points to ensure this information was communicated correctly throughout the process flow.

RESULTS

After implementation of the revised EWB-based Y-90 workflow, after two DMAIC-like cycles, there were zero misses out of 153 patient treatments in 1 year.

CONCLUSIONS

The DMAIC-based approach adopted here allowed the iterative development of a robust workflow to achieve an adaptable, event-minimizing planning process despite a complex setting which requires the participation of multiple teams for Y-90 microspheres therapy. Implementation of such a workflow using the EWB or similar platform with a DMAIC-based process improvement approach could be expanded to other treatment procedures, especially those requiring multidisciplinary management.

The use of exit detector sinograms to detect anatomical variations for patients extending beyond the TomoTherapy field of view: a feasibility study

PURPOSE

This work describes an independent method to use the TomoTherapy Hi-ART megavoltage CT imaging system for daily monitoring of anatomical changes of cancer patients whose anatomy extends beyond the imaging field of view.

METHODS

The imaging detector response to changes in attenuating media was measured using water-equivalent plastic. Weight loss was simulated using an anthropomorphic phantom and determining the system's ability to detect the weight loss. Layers of tissue-equivalent bolus were added to an anthropomorphic pelvis phantom and CT simulations of the phantom were conducted, one in which the phantom and bolus were both within the TomoTherapy imaging field of view, and another in which the couch was raised so that the bolus was outside the field of view. Gynecological treatment plans were developed using the TomoTherapy treatment planning system, and successive fractions of the plan were then delivered to the phantom. Weight loss was simulated by removing a 0.5 cm layer of bolus following each fraction. The exit detector sinograms were obtained from each fraction, and ratios of sinograms were calculated relative to a reference sinogram for which all bolus was in place. Histograms of ratio sinograms were determined and used to correlate with simulated weight loss. Exit detector sinograms and ratio histograms were also retrospectively analyzed for five patients all of whose anatomies extended beyond the imaging field of view and all of whom experienced weight variations exceeding 10% during treatment.

RESULTS

Exit detector signal is well correlated to changes in attenuator thickness as demonstrated in both slab and anthropomorphic phantom geometries. Measured and expected signal increases agreed to within less than 2% for simulated weight loss on the anthropomorphic phantom. Exit detector signals for pelvic patients with significant weight loss variations were consistent with phantom measurements.

CONCLUSIONS

The analysis of the ratio sinograms for the phantom measurements and real patients indicated that exit detector sinograms can be used to detect relative changes in patient anatomy for each fraction as a means of in vivo quality assurance.

Technical note: electronic chart checks in a paperless radiation therapy clinic

PURPOSE

EcCk, which stands for Electronic Chart ChecK, is a computer software and database system. It was developed to improve quality and efficiency of patient chart checking in radiation oncology departments. The core concept is to automatically collect and analyze patient treatment data, and to report discrepancies and potential concerns.

METHODS

EcCk consists of several different computer technologies, including relational database, DICOM, dynamic HTML, and image processing. Implemented in MATLAB and C#, EcCk processes patient data in DICOM, PDF, Microsoft Word, database, and Pinnacle native formats. Generated reports are stored on the storage server and indexed in the database. A standalone report-browser program is implemented to allow users to view reports on any computer in the department. Checks are performed according to predefined logical rules, and results are presented through color-coded reports in which discrepancies are summarized and highlighted. Users examine the reports and take appropriate actions. The core design is intended to automate human task and to improve the reliability of the performed tasks. The software is not intended to replace human audits but rather to aid as a decision support tool.

RESULTS

The software was successfully implemented in the clinical environment and has demonstrated the feasibility of automation of this common task with modern clinical tools. The software integrates multiple disconnected systems and successfully supports analysis of data in diverse formats.

CONCLUSIONS

While the human is the ultimate expert, EcCk has a significant potential to improve quality and efficiency of patient treatment record audits, and to allow verification of tasks that are not easily performed by humans. EcCk can potentially relieve human experts from simple and repetitive tasks, and allow them to work on other important tasks, and in the end to improve the quality and safety of radiation therapy treatments.

Independent verification of transferred delivery sinogram between two dosimetrically matched helical tomotherapy machines: a protocol for patient-specific quality assurance

The purpose of this study was to independently verify the transferred delivery sinogram between two dosimetrically matched helical tomotherapy machines with the goal of eliminating redundant quality assurance (QA) measurements on the second machine. The equivalence of the two machines was evaluated based on both geometric and dosimetric beam characteristics, including measuring open field per cent depth doses (PDD), longitudinal and transverse profiles and helical delivery of clinical patient treatment plans measured in phantoms. QA of 56 patient plans was studied. The delivery sinogram on the secondary machine was computed by accounting for the differences in the MLC characteristics of the two machines. Computed sinograms were compared against the transferred sinograms by tomotherapy's data management system for the same 56 patient plans. The PDD, transverse and longitudinal dose profiles agreed within ±1% between the two machines. Ionization chamber and planar dose measurements with the Iba MatriXX device on both machines for the 56 patients were found to be within ±3% of the doses computed by the tomotherapy treatment planning system. For all 56 patients, the differences between computed sinograms and DMS-converted sinograms were within ±2%. The matched tomotherapy machines had similar beam characteristics. The sinogram-based QA was validated using point and planar dose measurements and found to be acceptable for clinical use.

Determination of planning target volume for whole stomach irradiation using daily megavoltage computed tomographic images

PURPOSE

Whole stomach radiation therapy is often used in the management of gastric lymphoma. However, very limited data exist with regard to planning target volume requirements for the whole stomach. This study retrospectively analyzed daily megavoltage computed tomographic (CT) scans of gastric lymphoma patients in order to help determine the interfraction variation of the stomach position.

METHODS AND MATERIALS

Forty-one daily megavoltage CT images from 3 gastric lymphoma patients were used for stomach contouring. Each patient's megavoltage CT images were rigidly registered to their CT simulation data sets, and the margin in each direction that covered at least 95% of the daily stomach volumes was computed using a simple grid search. Patient setup variation was also calculated from the daily patient shifts. The organ motion margin was then added to the setup margin to render the total margin.

RESULTS

A uniform margin of 2.2 cm is required to cover 95% of the stomach over the treatment course. However, direction-specific margins were observed from 1.72, 1.88, 0.92, 2.23, 1.90, and 0.86 cm for the right, left, posterior, anterior, superior, and inferior directions, respectively.

CONCLUSIONS

The results of this study provide helpful 3-dimensional volumetric information to the limited existing data on margin requirements for whole stomach radiation therapy.

Verification of monitor unit calculations for non-IMRT clinical radiotherapy: report of AAPM Task Group 114

The requirement of an independent verification of the monitor units (MU) or time calculated to deliver the prescribed dose to a patient has been a mainstay of radiation oncology quality assurance. The need for and value of such a verification was obvious when calculations were performed by hand using look-up tables, and the verification was achieved by a second person independently repeating the calculation. However, in a modern clinic using CT/MR/PET simulation, computerized 3D treatment planning, heterogeneity corrections, and complex calculation algorithms such as convolution/superposition and Monte Carlo, the purpose of and methodology for the MU verification have come into question. In addition, since the verification is often performed using a simpler geometrical model and calculation algorithm than the primary calculation, exact or almost exact agreement between the two can no longer be expected. Guidelines are needed to help the physicist set clinically reasonable action levels for agreement. This report addresses the following charges of the task group: (1) To re-evaluate the purpose and methods of the "independent second check" for monitor unit calculations for non-IMRT radiation treatment in light of the complexities of modern-day treatment planning. (2) To present recommendations on how to perform verification of monitor unit calculations in a modern clinic. (3) To provide recommendations on establishing action levels for agreement between primary calculations and verification, and to provide guidance in addressing discrepancies outside the action levels. These recommendations are to be used as guidelines only and shall not be interpreted as requirements.

Technical note: DIRART--A software suite for deformable image registration and adaptive radiotherapy research

PURPOSE

Recent years have witnessed tremendous progress in image guide radiotherapy technology and a growing interest in the possibilities for adapting treatment planning and delivery over the course of treatment. One obstacle faced by the research community has been the lack of a comprehensive open-source software toolkit dedicated for adaptive radiotherapy (ART). To address this need, the authors have developed a software suite called the Deformable Image Registration and Adaptive Radiotherapy Toolkit (DIRART).

METHODS

DIRART is an open-source toolkit developed in MATLAB. It is designed in an object-oriented style with focus on user-friendliness, features, and flexibility. It contains four classes of DIR algorithms, including the newer inverse consistency algorithms to provide consistent displacement vector field in both directions. It also contains common ART functions, an integrated graphical user interface, a variety of visualization and image-processing features, dose metric analysis functions, and interface routines. These interface routines make DIRART a powerful complement to the Computational Environment for Radiotherapy Research (CERR) and popular image-processing toolkits such as ITK.

RESULTS

DIRART provides a set of image processing/registration algorithms and postprocessing functions to facilitate the development and testing of DIR algorithms. It also offers a good amount of options for DIR results visualization, evaluation, and validation.

CONCLUSIONS

By exchanging data with treatment planning systems via DICOM-RT files and CERR, and by bringing image registration algorithms closer to radiotherapy applications, DIRART is potentially a convenient and flexible platform that may facilitate ART and DIR research. 0 2011 Ameri-

Fast, low-dose patient localization on TomoTherapy via topogram registration

PURPOSE

To investigate a protocol which efficiently localizes TomoTherapy patients with a scout imaging (topogram) mode that can be used with or instead of 3D megavoltage computed tomography (MVCT) imaging.

METHODS

The process presented here is twofold: (a) The acquisition of the topogram using the TomoTherapy MV imaging system and (b) the generation of a digitally reconstructed topogram (DRT) derived from a standard kV CT simulation data set. The unique geometric characteristics of the current TomoTherapy imaging system were explored both theoretically and by acquiring topograms of anthropomorphic phantoms and comparing these images to DRT images. The performance of the MV topogram imaging system in terms of image quality, dose incurred to the patient, and acquisition time was investigated using ionization chamber and radiographic film measurements.

RESULTS

The time required to acquire a clinically usable topogram, limited by the maximum couch speed of 4.0 cm s(-1), was 12.5 s for a 50 cm long field. The patient dose was less than 1% of that delivered by a helical MVCT scan. Further refinements within the current TomoTherapy system, most notably decreasing the imaging beam repetition rate during MV topogram acquisition, would further reduce the topogram dose to less than 25 microGy per scan without compromising image quality.

CONCLUSIONS

Topogram localization on TomoTherapy is a fast and low-dose alternative to 3D MVCT localization. A protocol designed that exclusively utilized MV topograms would result in a 30-fold reduction in imaging time and a 100-fold reduction in dose from localization scans using the current TomoTherapy workflow.

Technical note: deformable image registration on partially matched images for radiotherapy applications

In radiation therapy applications, deformable image registrations (DIRs) are often carried out between two images that only partially match. Image mismatching could present as superior-inferior coverage differences, field-of-view (FOV) cutoffs, or motion crossing the image boundaries. In this study, the authors propose a method to improve the existing DIR algorithms so that DIR can be carried out in such situations. The basic idea is to extend the image volumes and define the extension voxels (outside the FOV or outside the original image volume) as NaN (not-a-number) values that are transparent to all floating-point computations in the DIR algorithms. Registrations are then carried out with one additional rule that NaN voxels can match any voxels. In this way, the matched sections of the images are registered properly, and the mismatched sections of the images are registered to NaN voxels. This method makes it possible to perform DIR on partially matched images that otherwise are difficult to register. It may also improve DIR accuracy, especially near or in the mismatched image regions.

Deformable registration of abdominal kilovoltage treatment planning CT and tomotherapy daily megavoltage CT for treatment adaptation

In adaptive radiation therapy the treatment planning kilovoltage CT (kVCT) images need to be registered with daily CT images. Daily megavoltage CT (MVCT) images are generally noisier than the kVCT images. In addition, in the abdomen, low image contrast, differences in bladder filling, differences in bowel, and rectum filling degrade image usefulness and make deformable image registration very difficult. The authors have developed a procedure to overcome these difficulties for better deformable registration between the abdominal kVCT and MVCT images. The procedure includes multiple image preprocessing steps and a two deformable registration steps. The image preprocessing steps include MVCT noise reduction, bowel gas pockets detection and painting, contrast enhancement, and intensity manipulation for critical organs. The first registration step is carried out in the local region of the critical organs (bladder, prostate, and rectum). It requires structure contours of these critical organs on both kVCT and MVCT to obtain good registration accuracy on these critical organs. The second registration step uses the first step results and registers the entire image with less intensive computational requirement. The two-step approach improves the overall computation speed and works together with these image preprocessing steps to achieve better registration accuracy than a regular single step registration. The authors evaluated the procedure on multiple image datasets from prostate cancer patients and gynecological cancer patients. Compared to rigid alignment, the proposed method improves volume matching by over 60% for the critical organs and reduces the prostate landmark registration errors by 50%.

Helical tomotherapy planning for left-sided breast cancer patients with positive lymph nodes: comparison to conventional multiport breast technique

PURPOSE

To evaluate the feasibility of using helical tomotherapy for locally advanced left-sided breast cancer.

METHODS AND MATERIALS

Treatment plans were generated for 10 left-sided breast cancer patients with positive lymph nodes comparing a multiport breast (three-dimensional) technique with the tomotherapy treatment planning system. The planning target volumes, including the chest wall/breast, supraclavicular, axillary, and internal mammary lymph nodes, were contoured. The treatment plans were generated on the tomotherapy treatment planning system to deliver 50.4 Gy to the planning target volume. To spare the contralateral tissues, directional blocking was applied to the right breast and right lung. The optimization goals were to protect the lungs, heart, and right breast.

RESULTS

The tomotherapy plans increased the minimal dose to the planning target volume (minimal dose received by 99% of target volume = 46.2 +/- 1.3 Gy vs. 27.9 +/- 17.1 Gy) while improving the dose homogeneity (dose difference between the minimal dose received by 5% and 95% of the planning target volume = 7.5 +/- 1.8 Gy vs. 37.5 +/- 26.9 Gy). The mean percentage of the left lung volume receiving >or=20 Gy in the tomotherapy plans decreased from 32.6% +/- 4.1% to 17.6% +/- 3.5%, while restricting the right-lung mean dose to <5 Gy. However, the mean percentage of volume receiving >or=5 Gy for the total lung increased from 25.2% +/- 4.2% for the three-dimensional technique to 46.9% +/- 8.4% for the tomotherapy plan. The mean volume receiving >or=35 Gy for the heart decreased from 5.6% +/- 4.8% to 2.2% +/- 1.5% in the tomotherapy plans. However, the mean heart dose for tomotherapy delivery increased from 7.5 +/- 3.4 Gy to 12.2 +/- 1.8 Gy.

CONCLUSION

The tomotherapy plans provided better dose conformity and homogeneity than did the three-dimensional plans for treatment of left-sided breast tumors with regional lymph node involvement, while allowing greater sparing of the heart and left lung from doses associated with increased complications.

Estimation of setup uncertainty using planar and MVCT imaging for gynecologic malignancies

PURPOSE

This prospective study investigates gynecologic malignancy online treatment setup error corrections using planar kilovoltage/megavoltage (KV/MV) imaging and helical MV computed tomography (MVCT) imaging.

METHODS AND MATERIALS

Twenty patients were divided into two groups. The first group (10 patients) was imaged and treated using a conventional linear accelerator (LINAC) with image-guidance capabilities, whereas the second group (10 patients) was treated using tomotherapy with MVCT capabilities. Patients treated on the LINAC underwent planar KV and portal MV imaging and a two-dimensional image registration algorithm was used to match these images to digitally reconstructed radiographs (DRRs). Patients that were treated using tomotherapy underwent MVCT imaging, and a three-dimensional image registration algorithm was used to match planning CT to MVCT images. Subsequent repositioning shifts were applied before each treatment and recorded for further analysis. To assess intrafraction motion, 5 of the 10 patients treated on the LINAC underwent posttreatment planar imaging and DRR matching. Based on these data, patient position uncertainties along with estimated margins based on well-known recipes were determined.

RESULTS

The errors associated with patient positioning ranged from 0.13 cm to 0.38 cm, for patients imaged on LINAC and 0.13 cm to 0.48 cm for patients imaged on tomotherapy. Our institutional clinical target volume-PTV margin value of 0.7 cm lies inside the confidence interval of the margins established using both planar and MVCT imaging.

CONCLUSION

Use of high-quality daily planar imaging, volumetric MVCT imaging, and setup corrections yields excellent setup accuracy and can help reduce margins for the external beam treatment of gynecologic malignancies.

Vulvar cancer in a patient with Fanconi's anemia, treated with 3D conformal radiotherapy

Fanconi's anemia (FA) is rare autosomal recessive disorder characterized by aplastic anemia, congenital anomalies, and cancer susceptibility. FA patients have deficiencies in DNA repair pathways that cause cellular sensitivity to ionizing radiation and cross-link agents such as mitomycin C and diepoxybutane (DEB). If these patients survive until early adulthood, they are at high risk for developing solid tumors, most commonly squamous cell carcinoma of the oropharynx, esophagus, and vulva. Treatment of these solid tumors with radiotherapy is complicated by the increased risk of normal tissue toxicity. Three-dimensional (3D) conformal radiotherapy is a technique that uses CT images to more accurately target tumors and maximize the dose to the tumor volume while limiting the dose to normal tissue. This report describes application of 3D conformal radiotherapy techniques to the treatment of vulvar cancer in a patient with FA in an attempt to limit the normal tissue volume exposed to radiation.

Multimodality image registration quality assurance for conformal three-dimensional treatment planning

PURPOSE

We present a quality assurance methodology to determine the accuracy of multimodality image registration and fusion for the purpose of conformal three-dimensional and intensity-modulated radiation therapy treatment planning. Registration and fusion accuracy between any combination of computed tomography (CT), magnetic resonance (MR), and positron emission computed tomography (PET) imaging studies can be evaluated.

METHODS AND MATERIALS

A commercial anthropomorphic head phantom filled with water and containing CT, MR, and PET visible targets was modified to evaluate the accuracy of multimodality image registration and fusion software. For MR and PET imaging, the water inside the phantom was doped with CuNO(3) and 18F-fluorodeoxyglucose (18F-FDG), respectively. Targets consisting of plastic spheres and pins were distributed throughout the cranium section of the phantom. Each target sphere had a conical-shaped bore with its apex at the center of the sphere. The pins had a conical extension or indentation at the free end. The contours of the spheres, sphere centers, and pin tips were used as anatomic landmark models for image registration, which was performed using affine coordinate-transformation tools provided in a commercial multimodality image registration/fusion software package. Four sets of phantom image studies were obtained: primary CT, secondary CT with different phantom immobilization, MR, and PET study. A novel CT, MR, and PET external fiducial marking system was also tested.

RESULTS

The registration of CT/CT, CT/MR, and CT/PET images allowed correlation of anatomic landmarks to within 2 mm, verifying the accuracy of the registration software and spatial fidelity of the four multimodality image sets.

CONCLUSIONS

This straightforward phantom-based quality assurance of the image registration and fusion process can be used in a routine clinical setting or for providing a working image set for development of the image registration and fusion process and new software.

Biologic dosimetry of bone marrow: induction of micronuclei in reticulocytes after exposure to 32P and 90Y

Bone marrow is the dose-limiting organ in targeted radionuclide therapy. Hence, determination of the absorbed dose to bone marrow from incorporated radionuclides is a critical element in treatment planning. This study investigated the potential of the micronucleus assay in peripheral blood reticulocytes (MnRETs) as an in vivo biologic dosimeter for bone marrow.

METHODS

After intravenous administration of 32P-orthophosphate or 90Y-citrate in Swiss Webster mice, DNA damage induced in bone marrow erythroblastoid cells was measured by subsequent scoring of MnRETs in peripheral blood. The response to exponentially decreasing dose rates was calibrated by irradiating animals with external 137Cs-gamma-rays. The gamma-ray dose rate was decreased exponentially, with the dose-rate decrease half-time corresponding to the effective clearance half-time (Te) of the radioactivity from the femoral bone (Te = 64 h for 90Y-citrate and Te = 255 h for 32P-orthophosphate).

RESULTS

The maximum MnRETs frequency occurred on the second and third day after injection of 90Y-citrate and 32P-orthophosphate, respectively. The same pattern was observed for exponentially decreasing dose rates of 137Cs-gamma-rays. For each type of exposure, the maximum MnRETs frequency increased in a dose-dependent manner. Using the calibrated dosimeter, the initial dose rates to the marrow per unit of injected activity were 0.0020 cGy/h/kBq and 0.0026 cGy/h/kBq for 32P-orthophosphate and 90Y-citrate, respectively.

CONCLUSION

Micronuclei in peripheral blood reticulocytes can be used as a noninvasive biologic dosimeter for measuring absorbed dose rate and absorbed dose to bone marrow from incorporated radionuclides.

Marrow toxicity of 33P-versus 32P-orthophosphate: implications for therapy of bone pain and bone metastases

Several bone-seeking radiopharmaceuticals, such as 32P-orthophosphate, 89Sr-chloride, 186Re-1,1 hydroxyethylidene diphosphonate (HEDP), and 153Sm-ethylene diamine tetramethylene phosphonic acid (EDTMP), have been used to treat bone pain. The major limiting factor with this modality is bone marrow toxicity, which arises from the penetrating nature of the high-energy beta particles emitted by the radionuclides. It has been hypothesized that marrow toxicity can be reduced while maintaining therapeutic efficacy by using radionuclides that emit short-range beta particles or conversion electrons. In view of the significant clinical experience with 32P-orthophosphate, and the similarity in pain relief afforded by 32P-orthophosphate and 89Sr-chloride, this hypothesis is examined in this study using 32P- and 33P-orthophosphate in a mouse femur model.

METHODS

Survival of granulocyte macrophage colony-forming cells (GM-CFCs) in femoral marrow was used as a biologic dosimeter for bone marrow. 32P- and 33P-orthophosphate were administered intravenously, and GM-CFC survival was determined as a function of time after injection and, at the nadir, as a function of injected activity. The kinetics of radioactivity in the marrow, muscle, and femoral bone were also determined. The biologic dosimeter was calibrated by assessing GM-CFC survival at its nadir after chronic irradiation of Swiss Webster mice with exponentially decreasing dose rates of gamma rays (relative biologic effectiveness equivalent to that of beta particles) from a low-dose rate 137Cs irradiator. Dose-rate decrease half-times (Td) (time required for 137Cs gamma ray dose rate to decrease by one half) of 62, 255, and 425 h and infinity were used to simulate the dose rate patterns delivered by the radiopharmaceuticals as dictated by their effective clearance half-times from the mouse femurs. These data were used to experimentally determine the mean absorbed dose to the femoral marrow per unit injected activity. Finally, a theoretical dosimetry model of the mouse femur was developed, and the absorbed doses to the femoral marrow, bone, and endosteum were calculated using the EGS4 Monte Carlo code.

RESULTS

When the animals were irradiated with exponentially decreasing dose rates of 137Cs gamma rays, initial dose rates required to achieve 37% survival were 1.9, 0.98, 0.88, and 0.79 cGy/h for dose rate decrease half-times of 62, 255, and 425 h and infinity, respectively. The D37 values were 144 +/- 15, 132 +/- 12, 129 +/- 3, and 133 +/- 10 cGy, respectively, compared with a value of 103 cGy for acute irradiation. When 32P and 33P were administered, the injected activities required to achieve 37% survival were 313 and 2,820 kBq, respectively. Theoretical dosimetry calculations show that 33P offers a 3- to 6-fold therapeutic advantage over 32P, depending on the source and target regions assumed.

CONCLUSION

The low-energy beta-particle emitter 33P appears to offer a substantial dosimetric advantage over energetic beta-particle emitters (e.g., 32p, 89Sr, 186Re) for irradiating bone and minimizing marrow toxicity. This suggests that low-energy beta or conversion electron emitters may offer a substantial advantage for alleviation of bone pain as well as for specifically irradiating metastatic disease in bone.

Considerations in the selection of radiopharmaceuticals for palliation of bone pain from metastatic osseous lesions

Bone pain is a common complication for terminal patients with bone metastases from prostate, lung, breast, and other malignancies. A multidisciplinary approach in treating bone pain is generally required, 1 which includes a combination of analgesic drug therapy, radiation therapy, hormonal therapy, and chemotherapy. Over the years, treatment of bone pain using bone-seeking radiopharmaceuticals has been explored extensively. Pharmaceuticals labeled with energetic 1-particle emitters such as 32p, 89Sr, 153Sm, and 186Re, in addition to the low-energy electron emitter 117mSn, have been studied for this purpose. Bone-marrow toxicity as a consequence of chronic irradiation by the energetic , particles is a general problem associated with this form of treatment. It is therefore desirable to identify radiochemicals that minimize the dose to the bone marrow and at the same time deliver therapeutic doses to the bone.

METHODS

New S values (mean absorbed dose per unit cumulated activity) for target regions of human bone and marrow were used to ascertain the capacity of various radiochemicals to deliver a high bone dose while minimizing the marrow dose. The relative dosimetric advantage of a given radiopharmaceutical compared with a reference radiochemical was quantitated as a dosimetric relative advantage factor (RAF). Several radionuclides that emit energetic 1 particles (32p, 89Sr, 153Sm, 186Re, and 177Lu) and radionuclides that emit low-energy electrons or beta particles (169Er, 117mSn, and 33p) were evaluated. For these calculations, ratios of the cumulated activity in the bone relative to cumulated activity in the marrow alpha equal to 10 and 100 were used.

RESULTS

When the radiopharmaceutical was assumed to be uniformly distributed in the endosteum and alpha was taken as 100 for both the reference and test radiochemicals, the RAF values compared with the reference radionuclide 32p were 1.0, 1.2, 1.4, 1.6, 1.7, 1.9, and 2.0 for 89Sr, 186Re, 153Sm, 177Lu, 169Er, 117mSn, and 33P, respectively. In contrast, when the radiopharmaceutical is assumed to be uniformly distributed in the bone volume, the RAF values for these 7 radionuclides were 1.1, 1.5, 2.4, 3.2, 4.5, 5.1, and 6.5, respectively.

CONCLUSION

These results suggest that low-energy electron emitters such as 117mSn and 33P are more likely to deliver a therapeutic dose to the bone while sparing the bone marrow than are energetic beta emitters such as 32p and 89Sr. Therefore, radiochemicals tagged with low-energy electron or beta emitters are the radiopharmaceuticals of choice for treatment of painful metastatic disease in bone.

Abutment region dosimetry for serial tomotherapy

PURPOSE

A commercial intensity modulated radiation therapy system (Corvus, NOMOS Corp.) is presently used in our clinic to generate optimized dose distributions delivered using a proprietary dynamic multileaf collimator (DMLC) (MIMiC) composed of 20 opposed leaf pairs. On our accelerator (Clinac 600C/D, Varian Associates, Inc.) each MIMiC leaf projects to either 1.00 x 0.84 or 1.00 x 1.70 cm2 (depending on the treatment plan and termed 1 cm or 2 cm mode, respectively). The MIMiC is used to deliver serial (axial) tomotherapy treatment plans, in which the beam is delivered to a nearly cylindrical volume as the DMLC is rotated about the patient. For longer targets, the patient is moved (indexed) between treatments a distance corresponding to the projected leaf width. The treatment relies on precise indexing and a method was developed to measure the precision of indexing devices. A treatment planning study of the dosimetric effects of incorrect patient indexing and concluded that a dose heterogeneity of 10% mm(-1) resulted. Because the results may be sensitive to the dose model accuracy, we conducted a measurement-based investigation of the consequences of incorrect indexing using our accelerator. Although the indexing provides an accurate field abutment along the isocenter, due to beam divergence, hot and cold spots will be produced below and above isocenter, respectively, when less than 300 degree arcs were used. A preliminary study recently determined that for a 290 degree rotation in 1 cm mode, 15% cold and 7% hot spots were delivered to 7 cm above and below isocenter, respectively. This study completes the earlier work by investigating the dose heterogeneity as a function of position relative to the axis of rotation, arc length, and leaf width. The influence of random daily patient positioning errors is also investigated.

METHODS AND MATERIALS

Treatment plans were generated using 8.0 cm diameter cylindrical target volumes within a homogeneous rectilinear film phantom. The plans included both 1 and 2 cm mode, optimized for 300 degrees, 240 degrees, and 180 degrees gantry rotations. Coronal-oriented films were irradiated throughout the target volumes and scanned using a laser film digitizer. The central target irradiated in 1 cm mode was also used to investigate the effects of incorrect couch indexing.

RESULTS

The dose error as a function of couch index error was 25% mm(-1), significantly greater than previously reported. The clinically provided indexing system yielded 0.10 mm indexing precision. The intrinsic dose distributions indicated that more heterogeneous dose distributions resulted from the use of smaller gantry angle ranges and larger leaf projections. Using 300 degrees gantry angle and 1 cm mode yielded 7% hot and 15% cold spots 7 cm below and above isocenter, respectively. When a 180 degree gantry angle was used, the values changed to 22% hot and 27% cold spots for the same locations. The heterogeneities for the 2 cm mode were 70% greater than the corresponding 1 cm values.

CONCLUSIONS

While serial tomotherapy is used to deliver highly conformal dose distributions, significant dosimetric factors must be considered before treatment. The patient must be immobilized during treatment to avoid dose heterogeneities caused by incorrect indexing due to patient movement. Even under ideal conditions, beam divergence can cause significant abutment-region dose heterogeneities. The use of larger gantry angle ranges, smaller leaf widths, and appropriate locations of the gantry rotation axis can minimize these effects.

Radioprotection against lethal damage caused by chronic irradiation with radionuclides in vitro

To examine the capacity of chemical protectors to mitigate damage caused by chronic irradiation by incorporated radionuclides in vitro, cells must be maintained in the presence of the protector during the course of the irradiation. Such long exposures to chemical protectors at concentrations high enough to afford protection usually results in extreme chemotoxicity. To overcome this problem, experimental conditions were developed to allow Chinese hamster V79 cells to be maintained in 5% DMSO for prolonged periods (up to 72 h) with no observable chemotoxicity. Under these conditions, the capacity of DMSO to protect against damage to V79 cells caused by unbound 32P and 3H2O and DNA-incorporated (131)IdU, [3H]dThd and 125IdU was examined. The dose modification factors for 32P, 3H2O, (131)IdU, [3H]dThd and 125IdU were 2.6+/-0.5, 2.3+/-0.3, 1.0+/-0.1, 1.16+/-0.07 and 1.07+/-0.02, respectively. These results show that 5% DMSO is capable of protecting cultured V79 cells against lethal damage caused by beta particles emitted by unbound 32P and 3H2O, whereas little or no protection is afforded against damage caused by beta particles emitted by DNA-incorporated (131)I and 3H or low-energy Auger electrons emitted by DNA-incorporated 125I.

Biological dosimetry of bone marrow for incorporated yttrium-90

The biological response of bone marrow to incorporated radionuclides depends on several factors such as absorbed dose, dose rate, proliferation and marrow reserve. The determination of the dose rate and absorbed dose to bone marrow from incorporated radionuclides is complex. This research used survival of granulocyte-macrophage colony-forming cells (GM-CFCs) as a biological dosimeter to determine experimentally the dose rate and dose to bone marrow after administration of 90Y-citrate.

METHODS

The radiochemical 90Y-citrate was administered intravenously to Swiss Webster mice. Biokinetics studies indicated that the injected 90Y quickly localized in the femurs (0.8% ID/femur) and cleared with an effective half-time of 62 hr. Subsequently, GM-CFC survival was determined as a function of femur uptake and injected activity. Finally, to calibrate GM-CFC survival as a biological dosimeter, mice were irradiated with external 137Cs gamma rays at dose rates that decreased exponentially with a half-time of 62 hr.

RESULTS

Femur uptake was linearly proportional to injected activity. The survival of GM-CFCs was exponentially dependent on both the initial 90Y femur activity and the initial dose rate from external 137Cs gamma rays with 5.1 kBq/femur and 1.9 cGy/hr, respectively, required to achieve 37% survival. Thus, 90Y-citrate delivers a dose rate of 0.37 cGy/hr to the femoral marrow per kBq of femur activity and the dose rate decreased with an effective half-time of 62 hr.

CONCLUSION

Survival of GM-CFCs can serve as a biological dosimeter to experimentally determine the dose rate kinetics in bone marrow.

Proliferation and the advantage of longer-lived radionuclides in radioimmunotherapy

In our previous study we used the linear-quadratic model [J. Nucl. Med. 35, 1861 (1994)] to confirm our initial finding, based on the time-dose-fractionation model [J. Nucl. Med. 34, 1801 (1993)], that longer-lived radionuclides (e.g., 32P, 91Y) can offer a substantial therapeutic advantage over the shorter-lived radionuclides presently used in radioimmunotherapy (e.g., 90Y). The original calculations using the linear-quadratic (LQ) model did not account for proliferation of the tumor and critical bone marrow tissues. It has been suggested that inclusion of a proliferation term in the LQ model can have a substantial impact on the biologically effective dose (BED). With this in mind, we have reexamined the therapeutic efficacy of longer versus short-lived radionuclides using the LQ model replete with proliferation terms for tumor and bone marrow. Relative advantage factors (RAF), which quantify the overall therapeutic advantage of a long-lived compared to short-lived radionuclide, were calculated accordingly. While the extrapolated initial dose rate required to achieve a given BED can be affected by the inclusion of proliferation terms for both the tumor and marrow, the relative advantage factors for the longer-lived radionuclides were not significantly affected. Longer-lived radionuclides such as (114m)In and 91Y are about three times more therapeutically effective than the shorter-lived 90Y which is currently used in RIT. In other words, for a given therapeutic effect in the tumor, a longer-lived radionuclide can result in a lower deleterious effect to the bone marrow than a short-lived radionuclide. Given that bone marrow is generally considered to be the dose-limiting organ, these results have important implications for radioimmunotherapy.