Recent advances and challenges in 2D/2D heterojunction photocatalysts for solar fuels applications

Although photocatalytic technology has emerged as an effective means of alleviating the projected future fuel crisis by converting sunlight directly into chemical energy, no visible-light-driven, low-cost, and highly stable photocatalyst has been developed to date. Due to considerably higher interfacial contact with numerous reactive sites, effective charge transmission and separation ability, and strong redox potentials, the focus has now shifted to 2D/2D heterojunction systems, which have exhibited effective photocatalytic performance. The fundamentals of 2D/2D photocatalysis for different applications and the classification of 2D/2D materials are first explained in this paper, followed by strategies to improve the photocatalytic performance of various 2D/2D heterojunction systems. Following that, current breakthroughs in 2D/2D metal-based and metal-free heterojunction photocatalysts, as well as their applications for H₂ evolution via water splitting, CO₂ reduction, and N₂ fixation, are discussed. Finally, a brief overview of current constraints and predicted results for 2D/2D heterojunction systems is also presented. This paper lays out a strategy for developing efficient 2D/2D heterojunction photocatalysts and sophisticated technology for solar fuel applications in order to address the energy issue.

Testing of photocatalytic potential of silver nanoparticles produced through nonthermal plasma reduction reaction and stabilized with saccharides

In this study, silver nanoparticles (AgNPs) were produced through an atmospheric pressure plasma reduction reaction and tested for photodegradation of methyl blue (MB) under sunlight exposure. The argon plasma born reactive species were used to reduce silver ions to AgNPs in the solution. Glucose, fructose and sucrose were also added in the solution to stabilize the growth process. The glucose stabilized reaction produced the smallest nanoparticles of 12 nm, while sucrose stabilized reaction produced relatively larger nanoparticles (14 nm). The nanoparticles exhibited rough morphology and narrow diameter distribution regardless of stabilizer type. The narrow diameter distribution and small band gap helped activating majority of nanoparticles at a single wavelength of light spectrum. The band gap energy of AgNPs varied from 2.22 eV to 2.41 eV, depending on the saccharide type. The photoluminescence spectroscopy of AgNPs produced emission peaks at 413 nm, 415 nm, and 418 nm. The photocatalytic potential of AgNP samples was checked by degrading MB dye under sunlight. The degradation reaction reached a saturation level of 98% after 60 min of light exposure.

Effect of microwave plasma treatment on magnetic and photocatalytic response of manganese ferrite nanoparticles for wastewater treatment

The conventionally synthesized nano-ferrite materials do not possess bulk properties, generally required for their use in mainstream industry. To make ferrite nanoparticles clinically applicable materials, it is important to have good control over morphology and optical properties of these materials. In this study, low-pressure microwave plasma was used to tailor the structural properties and surface chemistry of manganese ferrite nanoparticles. A facile sol-gel method was used to prepare cubic spinal structures of manganese ferrite nanoparticles. These nanoparticles were exposed to oxygen plasma sustained with a microwave source for improving their magnetic and photocatalytic activities. The techniques like XRD, SEM, PL, UV-Vis DRS, transient photocurrent response and EIS were used to characterize the samples. The plasma treated nanoparticles were used to degraded methyl blue (MB) dye in the solution. The photocatalytic activity showed 85% degradation of MB after 100 min of exposure of visible light. The second part of the paper studied the magnetic properties of the nanoparticles. The saturation magnetization decreased from 0.78 emu/g to 0.68 emu/g after plasma treatment of nanoparticles.

Optical characterization of non-thermal plasma jet energy carriers for effective catalytic processing of industrial wastewaters

An argon plasma jet was sustained in open air and characterized for its chemical composition. The optically characterized plasma jet was used to treat industrial wastewater containing mixed textile dyes and heavy metals. Since plasma jet produces UV-radiations, the photocatalytic TiO₂ was used to enhance plasma treatment efficiency especially for degradation of dyes. Mixed anatase and rutile phases of TiO₂ (5.2-8.5 nm) were produced through surfactant assisted sol-gel approach. The emission spectrum confirmed the presence of excited argon, OH, excited nitrogen, excited oxygen, ozone and nitric oxide in the plasma jet. The spectral lines of excited Ar, NO, O₃, OH^-, N₂, [Formula: see text], O, [Formula: see text] and O⁺ species were observed at wavelength of 695-740 nm, 254.3 nm, 307.9 nm, 302-310 nm, 330-380 nm, 390-415 nm, 715.6 nm, 500-600 nm and 400-500 nm. These reactive species decompose the organic pollutants and separate the heavy metals from the water samples. The conductivity of plasma exposed water samples increased while pH and hardness decreased. The atomic absorption spectrophotometry analysis confirmed the presence of heavy metals in the samples, which were effectively removed through plasma treatment. Finally, the effect of plasma treatment on Staphylococcus aureus strains was more pronounced than Escherichia coli strains.

Nitrogen Pollution Impact and Remediation through Low Cost Starch Based Biodegradable polymers

The world does not have too much time to ensure that the fast-growing population has enough land, food, water and energy. The rising food demand has brought a positive surge in fertilizers’ demand and agriculture-based economy. The world is using 170 million tons of fertilizer every year for food, fuel, fiber, and feed. The nitrogenous fertilizers are being used to meet 48% of the total food demand of the world. High fertilizer inputs augment the reactive nitrogen levels in soil, air, and water. The unassimilated reactive nitrogen changes into a pollutant and harms the natural resources. The use of controlled-release fertilizers for slowing down the nutrients’ leaching has recently been practiced by farmers. However, to date, monitoring of the complete discharge time and discharge rate of controlled released fertilizers is not completely understood by the researchers. In this work, corn starch was thermally processed into a week gel-like coating material by reacting with urea and borate. The granular urea was coated with native and processed starch in a fluidized bed reactor having bottom-up fluid delivery system. The processed starch exhibited better thermal and mechanical stability as compared to the native starch. Unlike the pure starch, the storage modulus of the processed starch dominated the loss modulus. The release time of urea, coated with processed starch, remained remarkably larger than the uncoated urea.

Velocimetry and response surface regression analysis of a swirling bed tested with mesh-coupled axial blade distributor

Fluidized bed technology is being used in several industrial processes. The well-controlled fluidization of a bed material is a prerequisite for successful implementation of this technology. Several variants of distributors are being tested for fluidized beds; however, scant information is available on their working regimes. In this study, an annular distributor was constructed by fixing blades between two concentric rings and covering the assembly with a wire mesh. This new distributor design was tested for fluidization of batches of a spherical bed material at different blade angles and superficial air velocities (SAVs). High-speed imaging and MATLAB supported velocimetry techniques were used to generate velocity vector fields of fluidized beds. These fields were analyzed further for bed velocity measurements at different bed zones. A response surface regression model was applied on the data to predict the response of the bed parameters. Statistically, the bed velocity was predicted to be about 0.497 m/s with the confidence interval in the range of 0.4948-0.4999. The experimental bed velocity remained between 0.531 m/s and 0.538 m/s under an optimized blade angle of 60°, SAV of 2.3 m/s, and bed weight of 500 g.

Electrochemical and Dry Sand Impact Erosion Studies on Carbon Steel

This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45 μm and 150 μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5% (by weight) of sand particles. LPR of the samples treated with 45 μm and 150 μm sand slurries was calculated about 949 Ω.cm² and 809 Ω.cm², respectively.