Evaluating the effect of strontium ranelate and photobiomodulation on cementogenic and osteogenic differentiation of buccal fat pad-derived stem cells: An in vitro study

This study aimed to analyze the impact of strontium ranelate (Str), photobiomodulation (PBM), or their combination of the proliferation, osteogenic differentiation, and cementogenic differentiation of buccal fat pad-derived stem cells. BFPdSCs were exposed to one of the following interventions: (1) PBM (660 nm), (2) PBM (660 nm) + Str, (3) PBM (880 nm), (4) PBM (880 nm) + Str, (5) Str. All study groups had significantly higher osteogenic differentiation than the control group (p < 0.05), and no significant difference existed between the 660 and 808 nm groups (p = 0.97). Compared to the Str group, 660 nm and 880 nm group samples had significantly lower osteogenic differentiation (p < 0.0001), while other groups did not show a significant difference. Regarding cementogenic differentiation, the 660 nm group showed higher values than the 808 nm group (p < 0.01). Compared with the Str group, 660 nm, 660 nm + Str, and 808 nm + Str groups showed significantly higher gene expression (p < 0.05). In the case of osteogenic differentiation, although photobiomodulation alone had a lower inducing effect than strontium ranelate, combining 808 nm diode lasers and strontium ranelate may provide the best results. Moreover, using a 660 nm diode laser and exposing stem cells to strontium ranelate can be the most effective approach to induce cementogenic differentiation.

Comparison of Periodontal Ligament Stem Cells with Mesenchymal Stem Cells from Other Sources: A Scoping Systematic Review of In vitro and In vivo Studies

OBJECTIVE

The application of stem cells in regenerative medicine depends on their biological properties. This scoping review aimed to compare the features of periodontal ligament stem cells (PDLSSCs) with stem cells derived from other sources.

DESIGN

An electronic search in PubMed/Medline, Embase, Scopus, Google Scholar and Science Direct was conducted to identify in vitro and in vivo studies limited to English language.

RESULTS

Overall, 65 articles were included. Most comparisons were made between bone marrow stem cells (BMSCs) and PDLSCs. BMSCs were found to have lower proliferation and higher osteogenesis potential in vitro and in vivo than PDLSCs; on the contrary, dental follicle stem cells and umbilical cord mesenchymal stem cells (UCMSCs) had a higher proliferative ability and lower osteogenesis than PDLSCs. Moreover, UCMSCs exhibited a higher apoptotic rate, hTERT expression, and relative telomerase length. The immunomodulatory function of adipose-derived stem cells and BMSCs was comparable to PDLSCs. Gingival mesenchymal stem cells showed less sensitivity to long-term culture. Both pure and mixed gingival cells had lower osteogenic ability compared to PDLSCs. Comparison of dental pulp stem cells (DPSCs) with PDLSCs regarding proliferation rate, osteo/adipogenesis, and immunomodulatory properties was contradictory; however, in vivo bone formation of DPSCs seemed to be lower than PDLSCs.

CONCLUSION

In light of the performed comparative studies, PDLSCs showed comparable results to stem cells derived from other sources; however, further in vivo studies are needed to determine the actual pros and cons of stem cells in comparison to each other.

Application of CAD-CAM Technologies for Maxillofacial Bone Regeneration: A Narrative Review of the Clinical Studies

The application of regenerative methods in treating maxillofacial defects can be categorized as functional bone regeneration in which scaffolds without protection are used and in-situ bone regeneration in which a protected healing space is created to induce bone formation. It has been shown that functional bone regeneration can reduce surgical time and obviate the necessity of autogenous bone grafting. However, studies mainly focused on applying this method to reconstruct minor bone effects, and more investigation concerning the large defects is required. In terms of in situ maxillofacial bone regeneration with the help of CAD-CAM technologies, the present data have suggested feasible mesh rigidity, perseverance of the underlying space, and apt augmentative results with CAD-CAM-based individualized Ti meshes. However, complications, including dehiscence and mesh exposure, coupled with consequent graft loss, infection and impeded regenerative rates have also been reported.

Application of chemical factors for acceleration of consolidation phase of the distraction osteogenesis: a scoping review

PURPOSE

This study aimed to analyze the effect of injecting chemical factors compared to conventional distraction osteogenesis (DO) treatment on the bone formation of the distracted area of the maxillofacial region in human and animal studies.

METHOD

Electronic search was done in PubMed, Scopus, Embase, and Cochrane database for studies published until September 2021. The studies' risk of bias (ROB) was assessed using the Cochrane Collaborations and NIH quality assessment tools. Meta-analyses were performed to assess the difference in the amount of bone formation and maximal load tolerance.

RESULTS

Among a total of 58 included studies, eight studies analyzed the bone formation rate of the distracted area in human models and others in animal models. Results of the human studies showed acceptable outcomes in the case of using bone morphogenic protein-2 (BMP-2), autologous bone-platelet gel, and calcium sulfate. However, using platelet reach plasma does not increase the rate of bone formation significantly. Quantitative analyses showed that both BMP-2 (SMD = 26.57; 95% CI = 18.86 to 34.28) and neuron growth factor (NGF) (SMD = 16.19; 95% CI = 9.64 to 22.75) increase the amount of bone formation. Besides, NGF increased the amount of load tolerance significantly (SMD = 30.03; 95% CI = 19.91 to 40.16). Additionally, BMP-2 has no significant impact on the post-treatment maxillary length (SMD = 9.19; 95% CI =  - 2.35 to 20.73).

CONCLUSION

Limited number of human studies with low quality used chemical factors to enhance osteogenesis and showed acceptable results. However, more studies with higher quality are required.

Global, regional, and national burden of other musculoskeletal disorders, 1990-2020, and projections to 2050: a systematic analysis of the Global Burden of Disease Study 2021

Background

Musculoskeletal disorders include more than 150 different conditions affecting joints, muscles, bones, ligaments, tendons, and the spine. To capture all health loss from death and disability due to musculoskeletal disorders, the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) includes a residual musculoskeletal category for conditions other than osteoarthritis, rheumatoid arthritis, gout, low back pain, and neck pain. This category is called other musculoskeletal disorders and includes, for example, systemic lupus erythematosus and spondylopathies. We provide updated estimates of the prevalence, mortality, and disability attributable to other musculoskeletal disorders and forecasted prevalence to 2050.

Methods

Prevalence of other musculoskeletal disorders was estimated in 204 countries and territories from 1990 to 2020 using data from 68 sources across 23 countries from which subtraction of cases of rheumatoid arthritis, osteoarthritis, low back pain, neck pain, and gout from the total number of cases of musculoskeletal disorders was possible. Data were analysed with Bayesian meta-regression models to estimate prevalence by year, age, sex, and location. Years lived with disability (YLDs) were estimated from prevalence and disability weights. Mortality attributed to other musculoskeletal disorders was estimated using vital registration data. Prevalence was forecast to 2050 by regressing prevalence estimates from 1990 to 2020 with Socio-demographic Index as a predictor, then multiplying by population forecasts.

Findings

Globally, 494 million (95% uncertainty interval 431-564) people had other musculoskeletal disorders in 2020, an increase of 123·4% (116·9-129·3) in total cases from 221 million (192-253) in 1990. Cases of other musculoskeletal disorders are projected to increase by 115% (107-124) from 2020 to 2050, to an estimated 1060 million (95% UI 964-1170) prevalent cases in 2050; most regions were projected to have at least a 50% increase in cases between 2020 and 2050. The global age-standardised prevalence of other musculoskeletal disorders was 47·4% (44·9-49·4) higher in females than in males and increased with age to a peak at 65-69 years in male and female sexes. In 2020, other musculoskeletal disorders was the sixth ranked cause of YLDs globally (42·7 million [29·4-60·0]) and was associated with 83 100 deaths (73 600-91 600).

Interpretation

Other musculoskeletal disorders were responsible for a large number of global YLDs in 2020. Until individual conditions and risk factors are more explicitly quantified, policy responses to this burden remain a challenge. Temporal trends and geographical differences in estimates of non-fatal disease burden should not be overinterpreted as they are based on sparse, low-quality data.

Funding

Bill & Melinda Gates Foundation.

Application of biodegradable Patient-specific scaffolds for maxillofacial bone regeneration: a scoping review of clinical studies

This study aimed to systematically review clinical studies in which biodegradable patient-specific scaffolds were used for bone regeneration. Studies in which biodegradable scaffolds were fabricated through computer-assisted design and computer-assisted manufacturing (CAD-CAM) procedures were included. Those that applied non-biodegradable materials or used biodegradable materials in a condensable powder or block form were excluded. Among a total of 26 included studies, 11 used customised allogeneic bone blocks, five used polycaprolactone (PCL)-containing scaffolds, four used hydroxyapatite (HA) scaffolds, and four biphasic calcium phosphate (BCP). The majority of the studies applied scaffolds for minor intraoral defects. All the large defects were reconstructed with polymer-containing scaffolds. Results of the included studies showed partial to complete filling of the defect following the application of biodegradable scaffolds. However, limited graft exposure was reported when using PCL, BCP, and HA scaffolds. Tissue engineering can be considered a potential method for the treatment of maxillofacial bone defects. However, more evidence is required, especially for the application of biodegradable scaffolds in large defects.

Effect of mechanical forces on the behavior of osteoblasts: a systematic review of in vitro studies

Mechanical loading can play a critical role in bone modeling/remodeling through osteoblasts, with several factors being involved in this process.The present study aims to systematically review the effect of mechanical stimulation on human osteoblast cell lineage combined with other variables.The PubMed and Scopus databases were electronically searched for studies analyzing the effect of compression and tension on human osteoblasts at different differentiation stages. Studies that used carcinogenic osteoblasts were excluded. In addition, studies that did not analyze the osteogenic differentiation or proliferation of cells were excluded. The risk of bias of the studies was evaluated using the modified CONSORT (Consolidated Standards of Reporting Trials) checklist. a total of 20 studies were included. The cells were subjected to tension and compression in 5 and 15 studies, respectively. The application of uniaxial and cyclic strain increased the proliferation of osteoblasts. The same increased pattern could be observed for the osteogenesis of the cells. The impact of the tensile force on the expression of the osteoclastic markers differed based on the loading characteristics. On the other side, the impact of compression on the proliferation of osteoblasts varied according to the magnitude and duration of the force. Besides, different patterns of alternations were observed among the osteogenic markers in response to compression. Meanwhile, compression increased the expression of the osteoclastic markers. It has been shown that the response of the markers related to bone formation or resorption can be altered based on the differentiation stage of the cells, the cell culture system, and the magnitude and duration of the force.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.

Applications of Machine Learning in Facial Cosmetic Surgeries: A Scoping Review

OBJECTIVE

To review the application of machine learning (ML) in the facial cosmetic surgeries and procedures METHODS AND MATERIALS: Electronic search was conducted in PubMed, Scopus, Embase, Web of Science, ArXiv and Cochrane databases for the studies published until August 2022. Studies that reported the application of ML in various fields of facial cosmetic surgeries were included. The studies' risk of bias (ROB) was assessed using the QUADAS-2 tool and NIH tool for before and after studies.

RESULTS

From 848 studies, a total of 29 studies were included and categorized in five groups based on the aim of the studies: outcome evaluation (n = 8), face recognition (n = 7), outcome prediction (n = 7), patient concern evaluation (n = 4) and diagnosis (n = 3). Total of 16 studies used public data sets. ROB assessment using QUADAS-2 tool revealed that six studies were at low ROB, five studies were at high ROB, and others had moderate ROB. All studies assessed with NIH tool showed fair quality. In general, all studies showed that using ML in the facial cosmetic surgeries is accurate enough to benefit both surgeons and patients.

CONCLUSION

Using ML in the field of facial cosmetic surgery is a novel method and needs further studies, especially in the fields of diagnosis and treatment planning. Due to the small number of articles and the qualitative analysis conducted, we cannot draw a general conclusion about the impact of ML in the sphere of facial cosmetic surgery.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Effects of distraction osteogenesis with Le Fort osteotomies on upper airway volumes: a systematic review and meta-analyses

OBJECTIVE

Distraction osteogenesis is one of the treatment options in patients with severe maxillomandibular abnormalities to treat morphological and respiratory problems (obstructive sleep apnea syndrome). The study aimed to evaluate the effect of Le Fort I, II and III distraction osteogenesis (DO) on upper airway dimensions and respiratory function.

METHODS

Electronic search was performed in PubMed, Scopus, Embase, Google Scholar and Cochrane databases. Studies that only involved two dimensional analyses were excluded. Besides, studies that performed DO in conjunction with orthognathic surgery were not considered. NIH quality assessment tool was used to evaluate the risk of bias. Meta-analyses were performed to assess sleep apnea indices and the mean differences in the airway dimensions before and after DO. Gradings of Recommendations, Assessment, Development and Evaluation were used to analyze the evidence level.

RESULTS

Among the 114 studies that went under full-text analyses, 11 articles met the inclusion criteria. Results of the quantitative analyses showed that maxillary Le Fort III DO significantly increased the amounts of oropharyngeal, pharyngeal and upper airway volumes. However, apnea-hypopnea index (AHI) showed a non-significant improvement after this procedure. Besides, the dimensions of the airways increased with Le Fort I and II DO, according to a qualitative analysis. Considering the design of the included studies, our results had a low level of evidence.

CONCLUSION

Maxillary Le Fort DO does not significantly impact AHI, while it significantly increases the airway dimensions. Meanwhile, multicentric studies with standardized evaluation are still required to confirm the effects of maxillary Le Fort DO on airway obstruction.

Management of recurrent aphthous ulcers with therapeutic Nd:YAG laser, using two different methods

BACKGROUND

Low-level laser therapy (LLLT) has been applied for the management of craniomaxillofacial disorders, including intraoral wounds, as well as recurrent aphthous stomatitis (RAS) lesions. However, the proper combination of laser features and tissue characteristics remains the major challenge in the realm of photobiomodulation (PBM).

OBJECTIVES

The aim of the present study was to assess the feasibility of neodymium-doped yttrium aluminum garnet (Nd:YAG) laser therapy in treating RAS lesions, and to compare 2 techniques, different with regard to the distance between the fiber tip and the ulcer.

MATERIAL AND METHODS

A total of 138 patients (94 males and 44 females) with untreated RAS were divided into 3 groups: focused laser (energy density: 48 J/cm2; power density: 0.797 W/cm2; spot size: 0.1256 cm2); defocused laser (energy density: 21 J/cm2; power density: 0.354 W/cm2; spot size: 0.2826 cm2); and placebo. In the focused group, laser irradiation was performed with the laser tip kept 1 mm away from the lesion. Acrylic cylinders were prepared to precisely fit the handpiece tip and hold it in the proper position. In the defocused group, acrylic cylinders were prepared to set the laser tip 6 mm away from the lesion to obtain defocused irradiation. Finally, in the placebo group, a routine laser therapy procedure was carried out with a helium-neon (He-Ne) red light laser. The lesion size, and pain intensity and duration were recorded.

RESULTS

Photobiomodulation showed a significantly more efficient pain relief as compared to the placebo group (p < 0.001) and also significantly better results in decreasing pain duration (p < 0.001). Besides, the diameter of the lesions in the exposed cases decreased during the 3 consecutive days of the study, while an increase in the diameter of the lesions was noticed in the placebo group.

CONCLUSIONS

The Nd:YAG laser therapy, with the conditions and adjustments of the present study, may be successfully applied to manage RAS lesions, using either focused and defocused scanning techniques.

Periosteum as a covering vascular flap in posterior mandibular augmentation: A retrospective cohort study

OBJECTIVE

To analyze the impact of creating periosteal vascular flaps on the amount of bone augmentation following inlay bone grafting (IBG) and cortical autogenous tenting (CAT).

MATERIALS AND METHODS

This was a retrospective cohort study enrolling a sample cohort of patients presented to a private clinic in 2015 and 2019 for posterior mandibular ridge augmentation before dental implant placement. The predictor variables were surgical methods: CAT vs. CAT in conjunction with periosteal flap (CATP) vs. IBG vs. IBG in conjunction with periosteal flap (IBGP). The primary outcome variables were supra bundle bone (SBB) superior to the inferior alveolar canal (ΔH) and crestal width difference (ΔW) at a 4-month follow-up. Appropriate statistics were computed at 0.05 significance level.

RESULTS

A total of 29 cases (10 males and 19 females) with a mean age of 57.96±7.14 years were included. A total of 33 sites were augmented through CATP, 16 sites through IBGP, 33 sites through CAT, and 11 sites through IBG techniques. All patients healed uneventfully without permanent neurosensory changes, and adequate horizontal (ΔW:3.33±0.71 mm) and vertical (ΔH:5.10±2.04 mm) bone dimensions were restored that allowed implant placement. Using periosteal vascular flaps significantly increased bone augmentation in both vertical and horizontal dimensions (P < 0.01).

CONCLUSION

Periosteal vascular flaps can increase the efficacy of mandibular augmentation techniques and decrease post-surgical complications.

Orthognathic Surgery for Management of Gummy Smile

Excessive gingival show is mainly caused by hypermobility of the upper lip, altered passive eruption, gingival hyperplasia, and bony maxillary vertical excess. Orthognathic surgery is the optimal treatment option for patients with moderate and severe vertical maxillary excess. Surrounding anatomic structures and soft tissue changes such as alternation in the nasal morphology confine the amount of impaction. Therefore, Le Fort 1 may be performed in conjunction with horseshoe osteotomy or partial turbinectomy. The possible necessity of further mandibular orthognathic surgeries and chin repositioning has to be considered. No common major complication and long-term relapse have been reported for maxillary impaction.

Evaluating the Preemptive Analgesic Effect of Photo-biomodulation Therapy on Pain Perception During Local Anesthesia Injection in Children: A Split-mouth Triple-blind Randomized Controlled Clinical Trial

To evaluate the impact of photobiomodulation therapy (PBMT) on injection pain perception and compare it with a topical oral anesthetic gel. A total of 30 patients of six to nine years old seeking pulpotomy treatment of maxillary secondary primary molars of both sides were considered for this split-mouth triple-blind randomized clinical trial. On one side of the maxilla, the low-level-laser (diode laser, 808 nm, 250 mW; 16.25 J; 32.5 J/cm² ) was irradiated upon the buccal gingiva of the tooth, while a Benzocaine 20% topical anesthetic gel was applied on the other side. A gel with the same taste (strawberry) was applied for the placebo. The Wong-Baker Faces Pain Rating Scale was used to evaluate the injection pain and post-operation pain at two timestamps, one hour and 24 hours after treatment. Patients' heart rate was also evaluated. Paired-T, Wilcoxon-signed-rank test, McNemar and Friedman tests were used for statistical analyses. Results demonstrated that PBMT could significantly decrease the injection pain perception and heart rate alternations compared to the topical anesthetic gels (P=0.000). However, no significant differences were documented between the two methods concerning the 1hour (P=0.26) and 24-hours (P=1.00) post-operation pain. PBMT can be an effective non-pharmacological technique for controlling injection pain.

Efficacy of regenerative medicine for alveolar cleft reconstruction: A systematic review and meta-analysis

Objective:

Objective: To analyze the efficacy and complications of regenerative medicine compared to autogenous bone graft for alveolar cleft reconstruction.

Method:

Method: Electronic search was done in PubMed, Scopus, Embase and Cochrane database for studies published until May 2021. No limitations were considered for the type of the included studies. The risk of bias (ROB) of the studies was assessed using the Cochrane Collaborations and NIH quality assessment tool. Meta-analyses were performed to assess the difference in the amount of bone formation and rate of complications. Grading of Recommendations, Assessment, Development and Evaluation (GRADE) was used for analyzing the level of the evidence.

Results:

Results: Among a total of 42 included studies, 21 studies used growth factors, 16 studies delivered cells, and five studies used biomaterials for bone regeneration of the alveolar cleft. Results showed no significant difference in the amount of bone formation between bone morphogenic protein-2 and iliac graft treated patients after six months (P=0.44) and 12 months (P=0.17) follow-up. Besides, higher swelling (OR=9.46,P<0.01) and less infection (OR=0.19,P=0.01) observed in BMP treated patients. Using stem cells can reduce the post-treatment pain (OR=0.04,P=0.01) but it has no significant impact on other complications (P>0.05). Using tissue engineering methods reduced the operation time (SD=1.06,P<0.01). GRADE assessment showed that results regarding the amount of bone formation volume after six and 12 months have low level of evidence.

Conclusion:

Conclusion: Tissue engineering methods can provide a comparable amount of bone formation as of the autogenous graft and reduce some of the complications, operation time and hospitalization duration.

Effect of metformin on the behavior of dental pulp stem cells cultured on freeze-dried bone allografts

BACKGROUND

Considering the complications associated with autogenous bone grafting, the use of freezedried bone allograft (FDBA) granules may be considered as an alternative treatment plan.

OBJECTIVES

The aim of this study was to evaluate the effect of metformin on both the proliferation and osteogenic capability of dental pulp stem cells (DPSCs) cultured on FDBA granules.

MATERIAL AND METHODS

First, a pilot study was conducted only on DPSCs to confirm cellular viability and the osteoinducing effect of 100 μmol/L metformin. Next, the cells were loaded on FDBA granules and treated with and without metformin. Finally, the following analyses were performed: scanning electron microscopy (SEM) (cell attachment); the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay (proliferation); and alkaline phosphatase (ALP) activity analysis (osteogenic differentiation).

RESULTS

The SEM images revealed that metformin enhanced the adhesion of DPSCs on FDBA granules. In addition, metformin was shown to increase cell proliferation/viability from day 1 to day 7. Compared to the control, a significant difference was observed after 7 days of treatment. Metformin enhanced the osteogenic capability of FDBA in both standard and osteoinducing conditions. An increase in ALP activity was significant after 7 days of treatment. The positive effect of metformin on differentiation was significant in osteoinducing conditions.

CONCLUSIONS

Metformin can be applied as an additional osteoinductive factor in bone regeneration treatment. Moreover, scaffolds with controlled release of metformin can be considered a proper osteoinductive bone substitute that may lessen the complications related to applying allograft scaffolds alone.

3D Printed Composite Scaffolds in Bone Tissue Engineering: A systematic review

OBJECTIVE

This study aimed to analyze the effect of fabrication factors on both biological and physico-chemical features of 3-dimensional (3D) printed composite scaffolds.

METHOD

Electronic search was done according to the PRISMA guideline in PubMed and Scopus databases limited to English articles published until May 2021.Studies in which composite scaffolds were fabricated through computer-aided design and computer-aided manufacturing (CAD-CAM)-based methods were included.Articles regarding the features of the scaffolds fabricated through indirect techniques were excluded.

RESULTS

Full text of 121 studies were reviewed, and 69 met the inclusion criteria. According to analyzed studies, PCL and HA were the most commonly used polymer and ceramic,respectively. Besides,the Solvent-based technique was the most commonly used composition technique, which enabled preparing blends with high concentrations of ceramic materials. The most common fabrication method used in the included studies was Fused deposition modeling (FDM).The addition of bio-ceramics enhanced the mechanical features and the biological behaviors of the printed scaffolds in a ratio-dependent manner. However,studies that analyzed the effect of ceramic weight ratio showed that scaffolds with the highest ceramic content did not necessarily possess the optimal biological and non-biological features.

CONCLUSION

The biological and physico-chemical behaviors of the scaffold can be affected by pre-printing factors, including utilized materials, composition techniques, and fabrication methods. Fabricating scaffolds with high mineral content as of the natural bone may not provide the optimal condition for bone formation. Therefore, it is recommended that future studies compare the efficiency of different kinds of biomaterials rather than different weight ratios of one type.

Effect of mesenchymal stem cells with platelet-rich plasma carriers on bone formation after rapid maxillary expansion: An Animal Study

OBJECTIVE

To evaluate the effect of bone mesenchymal stem cells (BMSCs) with or without platelet-rich plasma (PRP) carriers on sutural new bone formation after rapid palatal expansion (RPE).

SETTINGS AND SAMPLE POPULATION

Sixty male Wistar rats were used in this study.

MATERIAL AND METHODS

All samples were subjected to 50cN of palatal expansion force for 7 days followed by 3 weeks of the retention period. The experimental groups received a single-dose injection of the specified solution at the time of retainer placement (BMSCs, PRP, BMSCs+PRP, normal saline). BMSCs used in this study were marked with the green fluorescent protein (GFP). New bone formation (NBF) in the sutural area was evaluated by µCT and occlusal radiography. In addition, semi-quantitative analyses were performed on histology images to analyse the quality of sutural bone, connective tissue and vascularization. Immunohistochemistry analyses were conducted for osteocalcin and collagen type I proteins.

RESULTS

After the 21-day retention period, limited GFP marked cells were detected around the sutural area. Samples treated with BMSCs + PRP had the highest NBF and showed higher expression of collagen type I and osteocalcin.

CONCLUSION

Injecting BMSCs + PRP may increase sutural bone density significantly. However, injecting BMSCs or PRP carriers alone did not affect sutural bone density.

Role of ACE2 polymorphism in COVID-19: impact of age

More than 2 million people have died as a result of the COVID-19 outbreak. Angiotensin-converting enzyme 2 (ACE2) is a counter-regulatory enzyme that converts angiotensin-2 to Ang-(1-7) form in the renin-angiotensin system. Several studies have been analyzed the correlation between ACE2 and COVID-19. Indeed, ACE2/Ang (1-7) system protects the lung against acute respiratory distress syndrome by its anti-inflammatory/anti-oxidant function. However, SARS-Cov-2 can use ACE2 for host cell entry. Expression of ACE2 can be altered by several factors, including hypertension, diabetes and obesity, which also could increase the severity of COVID-19 infection. Besides, since androgens increase the expression of ACE-2, males are at higher risks of COVID-19 infection. Although reported statistics showed a significantly different infection risks of COVID-19 between adults and children, the reason behind the different responses is still unclear. This review proposes the effect of ACE polymorphism on the severity of SARS-COV-2 induced pneumonia. The previous meta-analysis regarding the effect of ACE polymorphism on the severity of pneumonia showed that polymorphism only affects the adult's illness severity and not the children. Two recent meta-analyses examined the effect of ACE polymorphism on the prevalence and mortality rate of COVID-19 and reported contradicting results. Our opinion paper suggests that the effect of ACE polymorphism on the severity of COVID-19 depends on the patients age, same as of the pneumonia.

The effect of single/multiple micro-osteoperforation on the rate of orthodontic tooth movement and its possible complications: A systematic review and meta-analysis

OBJECTIVE

Different surgical and non-surgical approaches have been proposed to accelerate tooth movement and decrease the duration of orthodontic treatments. Recently, less invasive techniques such as micro-osteoperforation (MOP) are becoming more common. Several clinical trials have been performed to analyse the effect of MOP. This systematic review with meta-analyses was done to evaluate the effect of MOP on the rate of orthodontic tooth movement (OTM) and its complications.

MATERIAL AND METHODS

Electronic search was done in PubMed and Cochrane database for studies published until January 2021. Comparative randomized clinical trial studies with 10 or more participants per group were included. The risk of bias (ROB) of the studies was assessed according to the Cochrane Collaborations tool. Meta-analyses were performed to assess the mean difference in tooth movement rate and compare the level of pain between MOP and control groups.

RESULTS

Among a total of 15 included studies, eight studies were at low ROB, while others had unclear ROB. Ten studies evaluated the effect of MOP on OTM rate in canine retraction, and related meta-analysis showed a significant difference between the MOP and control group [SMD=0.42; 95% CI=0.20 to 0.63, P<0.01]. Besides, quantitative analysis showed MOP caused no significant higher anchorage loss [SMD=0.01; 95% CI=-0.15 to 0.13, P=0.89] and pain [SMD=0.54; 95% CI=-0.25 to 1.33, P=0.18].

CONCLUSIONS

Overall, both single and multiple applications of MOP increased the rate of OTM. However, the meta-analysis results of the four studies with low risk of bias showed that there is no significant difference in the rate of tooth movement between MOP and control groups. Besides, it has been shown that MOP did not significantly increase the level of pain, anchorage loss, and periodontal complications.

Effect of mesenchymal stem cells injection and low-level laser therapy on bone formation after rapid maxillary expansion: an animal study

INTRODUCTION

One of the most common orthodontic problems is maxillary constriction, which is mostly treated by rapid palatal expansion (RPE). However, its high rate of relapse and prolonged retention period have led to some challenges for orthodontists. To encounter these issues, accelerating bone regeneration can provide long-term stability of expanded maxilla. The present study aimed to evaluate the effect of low-level laser therapy (LLLT), bone marrow-derived mesenchymal stem cells (BMSCs) and their combination on promoting bone regeneration of the inter-maxillary suture after RPE in rats.

MATERIALS AND METHOD

Total of 60 rats went under RPE treatment. After 7 days, retention period started and interventions (group A, Control (saline); group B, LLLT; group C, BMSCs; group D, LLLT + BMSCs) were performed in the sutural area. After 21 days, radiographic and histological analyses were done. Histological analyses were conducted to evaluate the following criteria of the newly formed bone: the number of osteoblasts, new bone formation, vascularization, connective tissue. Moreover, sutural width was assessed in histologic images. To evaluate bone density at suture area, gray scale and Hounsfield Unit values were measured based on the occlusal radiographic and Micro-Computed topography images respectively.

RESULTS

Only in group C and D, osteoblasts and new bone formation were observed in all of the samples. There were no significant differences among the study groups regarding the post-treatment sutural width (P > 0.05). In the radiographic analysis, only group D showed more bone density compared to the control group (P = 0.022). Similarly, in micro-CT analysis, the most bone density was observed in group D which was significantly more than the control group (P = 0.013).

CONCLUSION

Our findings suggest that the application of LLLT and BMSCs is the most beneficial approach in accelerating bone regeneration in the inter-maxillary suture.