Polyphosphazene-Based Anion-Anchored Polymer Electrolytes For All-Solid-State Lithium Metal Batteries

Safety concerns of traditional liquid electrolytes, especially when paired with lithium (Li) metal anodes, have stimulated research of solid polymer electrolytes (SPEs) to exploit the superior thermal and mechanical properties of polymers. Polyphosphazenes are primarily known for their use as flame retardant materials and have demonstrated high Li-ion conductivity owing to their highly flexible P = N backbone which promotes Li-ion conduction via inter- and intrachain hopping along the polymer backbone. While polyphosphazenes are largely unexplored as SPEs in the literature, a few existing examples showed promising ionic conductivity. By anchoring the anion to the polymer backbone, one may primarily allow the movement of Li ions, alleviating the detrimental effects of polarization that are common in conventional dual-ion conducting SPEs. Anion-anchored SPEs, known as single Li-ion conducting solid polymer electrolytes (SLiC-SPEs), exhibit high Li-ion transference numbers (tLi+), which limits Li dendrite growth, thus further increasing the safety of SPEs. However, previously reported SLiC-SPEs suffer from inadequate ionic conductivity, small electrochemical stability windows (ESWs), and limited cycling stability. Herein, we report three polyphosphazene-based SLiC-SPEs comprising lithiated polyphosphazenes. The SLiC polyphosphazenes were prepared through a facile synthesis route, opening the door for enhanced tunability of polymer properties via facile macromolecular nucleophilic substitution and subsequent lithiation. State-of-the-art characterization techniques, such as differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS), and solid-state nuclear magnetic resonance spectroscopy (ssNMR) were employed to probe the effect of the polymer structure on Li-ion dynamics and other electrochemical properties. Produced SPEs showed thermal stability up to ∼208 °C with ionic conductivities comparable to that of the best-reported SLiC-SPEs that definitively comprise no solvents or plasticizers. Among the three lithiated polyphosphazenes, the SPE containing dilithium poly[bis(trifluoroethylamino)phosphazene] (pTFAP2Li) exhibited the most promising electrochemical characteristics with tLi+ of 0.76 and compatibility with both Li metal anodes and LiFePO4 (LFP) cathodes; through 40 cycles at 100 °C, the PEO-pTFAP2Li blend showed 81.2% capacity utilization and 86.8% capacity retention. This work constitutes one of the first successful demonstrations of the cycling performance of a true all-solid-state Li-metal battery using SLiC polyphosphazene SPEs.

Benzoimidazolium-derived dimeric and hydride n-dopants for organic electron-transport materials: impact of substitution on structures, electrochemistry, and reactivity

1,3-Dimethyl-2,3-dihydrobenzo[d]imidazoles, 1H, and 1,1',3,3'-tetramethyl-2,2',3,3'-tetrahydro-2,2'-bibenzo[d]imidazoles, 12, are of interest as n-dopants for organic electron-transport materials. Salts of 2-(4-(dimethylamino)phenyl)-4,7-dimethoxy-, 2-cyclohexyl-4,7-dimethoxy-, and 2-(5-(dimethylamino)thiophen-2-yl)benzo[d]imidazolium (1g-i+, respectively) have been synthesized and reduced with NaBH4 to 1gH, 1hH, and 1iH, and with Na:Hg to 1g2 and 1h2. Their electrochemistry and reactivity were compared to those derived from 2-(4-(dimethylamino)phenyl)- (1b+) and 2-cyclohexylbenzo[d]imidazolium (1e+) salts. E(1+/1•) values for 2-aryl species are less reducing than for 2-alkyl analogues, i.e., the radicals are stabilized more by aryl groups than the cations, while 4,7-dimethoxy substitution leads to more reducing E(1+/1•) values, as well as cathodic shifts in E(12•+/12) and E(1H•+/1H) values. Both the use of 3,4-dimethoxy and 2-aryl substituents accelerates the reaction of the 1H species with PC61BM. Because 2-aryl groups stabilize radicals, 1b2 and 1g2 exhibit weaker bonds than 1e2 and 1h2 and thus react with 6,13-bis(triisopropylsilylethynyl)pentacene (VII) via a "cleavage-first" pathway, while 1e2 and 1h2 react only via "electron-transfer-first". 1h2 exhibits the most cathodic E(12•+/12) value of the dimers considered here and, therefore, reacts more rapidly than any of the other dimers with VII via "electron-transfer-first". Crystal structures show rather long central C-C bonds for 1b2 (1.5899(11) and 1.6194(8) Å) and 1h2 (1.6299(13) Å).

Nanodiamond-Enhanced Nanofiber Separators for High-Energy Lithium-Ion Batteries

Current lithium-ion battery separators made from polyolefins such as polypropylene and polyethylene generally suffer from low porosity, low wettability, and slow ionic conductivity and tend to perform poorly against heat-triggering reactions that may cause potentially catastrophic issues, such as fire. To overcome these limitations, here we report that a porous composite membrane consisting of poly(vinylidene fluoride-co-hexafluoropropylene) nanofibers functionalized with nanodiamonds (NDs) can realize a thermally resistant, mechanically robust, and ionically conductive separator. We critically reveal the role of NDs in the polymer matrix of the membrane to improve the thermal, mechanical, crystalline, and electrochemical properties of the composites. Taking advantages of these characteristics, the ND-functionalized nanofiber separator enables high-capacity and stable cycling of lithium cells with LiNi_0.8Mn_0.1Co_0.1O₂ (NMC811) as the cathode, much superior to those using conventional polyolefin separators in otherwise identical cells.

Porous TiO2-x/C Nanofibers with Axially Aligned Tunnel Pores as Effective Sulfur Hosts for Stabilized Lithium-Sulfur Batteries

Hierarchically porous TiO_2-x/C nanofibers (NFs) with axially aligned cylindrical tunnel pore channels were synthesized as a sulfur (S) host for lithium-sulfur batteries (LSBs) by a microemulsion electrospinning method. We explored a synergistic chemical trapping reinforced by coordinatively unsaturated Ti³⁺ nuclei with oxygen deficiency (or more broadly via polar O-Ti-O units) in combination with physical trapping in both narrow pores (<5 nm) and larger ordered pore tunnels (20-100 nm) separated by thin walls to allow for a large volume of active material and rapid diffusion within the channels while effectively blocking out the diffusion of soluble lithium polysulfides. Due to this unique architecture and enhanced conductivity, the prepared materials enabled a high S loading (∼72 wt %) and significantly reduced the shuttle effect. Hence, the composite TiO_2-x/C@S cathodes exhibited a high utilization of active materials, excellent rate performance, and promising cycling stability (retention of up to ∼1010 mAh g^-1 after 150 cycles for the aerial capacity of 1.5 mAh cm^-2, with very stable performance even for the high S loading of 2.5 mg cm^-2). By designing control nanomaterials that lack either the pore tunnels or the desired chemical compositions, we elucidated the importance of the synergistic effect of both factors. This work demonstrates a successful exploration of oxide NFs with tunnel pores via a simple single-needle microemulsion electrospinning method, which should pave the way for similar nanomaterials engineering with other chemistries for improved LSB performance.

Stability of FeF3-Based Sodium-Ion Batteries in Nonflammable Ionic Liquid Electrolytes at Room and Elevated Temperatures

Iron trifluoride (FeF3), a conversion-type cathode for sodium-ion batteries (SIBs), is based on cheap and abundant Fe and provides high theoretical capacity. However, the applications of FeF3-based SIBs have been hindered by their low-capacity utilization and poor cycling stability. Herein, we report greatly enhanced performance of FeF3 in multiple types of ionic liquid (IL) electrolytes at both room temperature (RT) and elevated temperatures. The Pyr1,4FSI electrolyte demonstrated the best cycling stability with an unprecedented decay rate of only ∼0.023% per cycle after the initial stabilization and an average coulombic efficiency of ∼99.5% for over 1000 cycles at RT. The Pyr1,3FSI electrolyte demonstrated the best cycling stability with a capacity decay rate of only ∼0.25% per cycle at 60 °C. Cells using Pyr1,3FSI and EMIMFSI electrolytes also showed promising cycling stability with capacity decay rates of ∼0.039% and ∼0.030% per cycle over 1000 cycles, respectively. A protective and ionically conductive cathode electrolyte interphase (CEI) layer is formed during cycling in ILs, diminishing side reactions that commonly lead to gassing and excessive CEI growth in organic electrolytes, especially at elevated temperatures. Furthermore, the increased ionic conductivity and decreased viscosity of ILs at elevated temperatures help attain higher accessible capacity. The application of ILs sheds light on designing a protective CEI for its use in stable SIBs.

Controlled n-Doping of Naphthalene-Diimide-Based 2D Polymers

2D polymers (2DPs) are promising as structurally well-defined, permanently porous, organic semiconductors. However, 2DPs are nearly always isolated as closed shell organic species with limited charge carriers, which leads to low bulk conductivities. Here, the bulk conductivity of two naphthalene diimide (NDI)-containing 2DP semiconductors is enhanced by controllably n-doping the NDI units using cobaltocene (CoCp₂ ). Optical and transient microwave spectroscopy reveal that both as-prepared NDI-containing 2DPs are semiconducting with sub-2 eV optical bandgaps and photoexcited charge-carrier lifetimes of tens of nanoseconds. Following reduction with CoCp₂ , both 2DPs largely retain their periodic structures and exhibit optical and electron-spin resonance spectroscopic features consistent with the presence of NDI-radical anions. While the native NDI-based 2DPs are electronically insulating, maximum bulk conductivities of >10^-4  S cm^-1 are achieved by substoichiometric levels of n-doping. Density functional theory calculations show that the strongest electronic couplings in these 2DPs exist in the out-of-plane (π-stacking) crystallographic directions, which indicates that cross-plane electronic transport through NDI stacks is primarily responsible for the observed electronic conductivity. Taken together, the controlled molecular doping is a useful approach to access structurally well-defined, paramagnetic, 2DP n-type semiconductors with measurable bulk electronic conductivities of interest for electronic or spintronic devices.

Porous flexible frameworks: origins of flexibility and applications

Porous crystalline frameworks including zeolites, metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs) have attracted great research interest in recent years. In addition to their assembly in the solid-state being fundamentally interesting and aesthetically pleasing, their potential applications have now pervaded in different areas of chemistry, biology and materials science. When framework materials are endowed with 'flexibility', they exhibit some properties (e.g., stimuli-induced pore breathing and reversible phase transformations) that are distinct from their rigid counterparts. Benefiting from flexibility and porosity, these framework materials have shown promise in applications that include separation of toxic chemicals, isotopes and hydrocarbons, sensing, and targeted delivery of chemicals. While flexibility in MOFs has been widely appreciated, recent developments of COFs and HOFs have established that flexibility is not just limited to MOFs. In fact, zeolites-that are considered rigid when compared with MOFs-are also known to exhibit dynamic modes. Despite flexibility may be conceived as being detrimental to the formation and stability of periodic structures, the landscape of flexible framework structures continues to expand with discovery of new materials with promising applications. In this review, we make an account of different flexible framework materials based on their framework types with a more focus on recent examples and delve into the origin of flexibility in each case. This systematic analysis of different flexibility types based on their origins enables understanding of structure-property relationships, which should help guide future development of flexible framework materials based on appropriate monomer design and tailoring their properties by bottom-up approach. In essence, this review provides a summary of different flexibility types extant to framework materials and critical analysis of importance of flexibility in emerging applications.

New Mechanistic Insights into the Formation of Imine-Linked Two-Dimensional Covalent Organic Frameworks

A more robust mechanistic understanding of imine-linked two-dimensional covalent organic frameworks (2D COFs) is needed to improve their crystalline domain sizes and to control their morphology, both of which are necessary to fully realize their application potential. Here, we present evidence that 2D imine-linked COFs rapidly polymerize as crystalline sheets that subsequently reorganize to form stacked structures. Primarily, this study focuses on the first few minutes of 1,3,5-tris(4-aminophenyl)benzene and terephthaldehyde polymerization, which yields an imine-linked 2D COF. In situ X-ray diffraction and thorough characterization of solids obtained using gentler isolation and activation methods than have typically been used in the literature indicate that periodic imine-linked 2D structures form within 60 s, which then form more ordered stacked structures over the course of several hours. This stacking process imparts improved stability toward the isolation process relative to that of the early stage materials, which likely obfuscated previous mechanistic conclusions regarding 2D polymerization that were based on products isolated using harsh activation methods. This revised mechanistic picture has useful implications; the 2D COF layers isolated at very short reaction times are easily exfoliated, as observed in this work using high-resolution transmission electron microscopy and atomic force microscopy. These results suggest improved control of imine-linked 2D COF formation can be obtained through manipulation of the polymerization conditions and interlayer interactions. Qualitatively similar results were obtained for analogous materials obtained from 2,5-di(alkoxy)terephthaldehyde derivatives, except for the COF with the longest alkoxy chains examined (OC₁₂H₂₅), which, although shown by in situ X-ray diffraction to be highly crystalline in the reaction mixture, is much less crystalline when isolated than the other COFs examined, likely due to the more severe steric impact of the dodecyloxy functionality on the stacking process.

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm^-2 ) with moderate radiance (<400 W sr^-1 m^-2 ). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr^-1 m^-2 , peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm^-2 ), and tenfold increase in operational lifetime (when driven at 100 mA cm^-2 ). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm^-2 and an EQE of ≈1% at 1 kA cm^-2 are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.

Rapid Synthesis of High Surface Area Imine-Linked 2D Covalent Organic Frameworks by Avoiding Pore Collapse During Isolation

Imine-linked 2D covalent organic frameworks (COFs) form more rapidly than previously reported under Brønsted acid-catalyzed conditions, showing signs of crystallinity within a few minutes, and maximum crystallinity within hours. These observations contrast with the multiday reaction times typically employed under these conditions. In addition, vacuum activation, which is often used to isolate COF materials significantly erodes the crystallinity and surface area of the several isolated materials, as measured by N₂ sorption and X-ray diffraction. This loss of material quality during isolation for many networks has historically obscured otherwise effective polymerization conditions. The influence of the activation procedure is characterized in detail for three COFs, with the commonly used 1,3,5-tris(4-aminophenyl)benzene-terephthaldehyde network (TAPB-PDA COF), the most prone to pore collapse. When the networks are activated carefully, rapid COF formation is general for all five of the imine-linked 2D COFs studied, with all exhibiting excellent crystallinity and surface areas, including the highest surface areas reported to date for three materials. Furthermore, to simplify the workup of COF materials, a simple nitrogen flow method provides high-quality materials without the need for specialized equipment. These insights have important implications for studying and understanding how 2D COFs form.

Nitrogen-Free Bifunctional Bianthryl Leads to Stable White-Light Emission in Bilayer and Multilayer OLED Devices

White organic light-emitting diodes (WOLEDs) are at the center stage of OLED research today because of their advantages in replacing the high energy-consuming lighting technologies in vogue for a long time. New materials that emit white light in simple devices are much sought after. We have developed two novel electroluminescent materials, referred to as BABZF and BATOMe, based on a twisted bianthryl core, which are brilliantly fluorescent, thermally highly stable with high T _d and T _g, and exhibit reversible redox property. Although inherently blue emissive, BABZF leads to white-light emission (CIE ≈ 0.28, 0.33) with a moderate power efficiency of 2.24 lm/W and a very high luminance of 15 600 cd/m² in the fabricated multilayer nondoped OLED device. This device exhibited excellent color stability over a range of applied potential. Remarkably, similar white-light emission was captured even from a double-layer device, attesting to the innate hole-transporting ability of BABZF despite it being non-nitrogenous, that is, lacking any traditional hole-transporting di-/triarylamino group(s). Similar studies with BATOMe led to inferior device performance results, thereby underscoring the importance of dibenzofuryl groups in BABZF. Experimental as well as theoretical studies suggest the possibility of emission from multiple species involving BABZF and its exciplex and electroplex in the devices. The serendipitously observed white-light emission from a double-layer device fabricated with an unconventional hole-transporting material (HTM) opens up new avenues to create new non-nitrogenous HTMs that may lead to more efficient white-light emission in simple double-layer devices.

Carbo[5]helicene versus planar phenanthrene as a scaffold for organic materials in OLEDs: the electroluminescence of anthracene-functionalized emissive materials

Rigid and twisted carbo[5]helicene imparts better physical and electroluminescence properties than planar phenantherene for phenylanthracene-functionalized emissive materials.

Tri- and tetraarylanthracenes with novel λ, χ and ψ topologies as blue-emissive and fluorescent host materials in organic light-emitting diodes (OLEDs)

Aryl-anthracene derivatives with λ, χ and ψ topologies serve as materials in OLEDs with intriguingly similar physical and electroluminescence properties.

Hole-Transporting Materials Based on Twisted Bimesitylenes for Stable Perovskite Solar Cells with High Efficiency

A new class of hole-transport materials (HTMs) based on the bimesitylene core designed for mesoporous perovskite solar cells is introduced. Devices fabricated using two of these derivatives yield higher open-circuit voltage values than the commonly used spiro-OMeTAD. Power conversion efficiency (PCE) values of up to 12.11% are obtained in perovskite-based devices using these new HTMs. The stability of the device made using the highest performing HTM (P1) is improved compared with spiro-OMeTAD as evidenced through long-term stability tests over 1000 h.

Benzophenones as Generic Host Materials for Phosphorescent Organic Light-Emitting Diodes

Despite the fact that benzophenone has traditionally served as a prototype molecular system for establishing triplet state chemistry, materials based on molecular systems containing the benzophenone moiety as an integral part have not been exploited as generic host materials in phosphorescent organic light-emitting diodes (PhOLEDs). We have designed and synthesized three novel host materials, i.e., BP2-BP4, which contain benzophenone as the active triplet sensitizing molecular component. It is shown that their high band gap (3.91-3.93 eV) as well as triplet energies (2.95-2.97 eV) permit their applicability as universal host materials for blue, green, yellow, and red phosphors. While they serve reasonably well for all types of dopants, excellent performance characteristics observed for yellow and green devices are indeed the hallmark of benzophenone-based host materials. For example, maximum external quantum efficiencies of the order of 19.2% and 17.0% were obtained from the devices fabricated with yellow and green phosphors using BP2 as the host material. White light emission, albeit with rather poor efficiencies, has been demonstrated as a proof-of-concept by fabrication of co-doped and stacked devices with blue and yellow phosphors using BP2 as the host material.

Benzophenone-imbedded benzoyltriptycene with high triplet energy for application as a universal host material in phosphorescent organic light-emitting diodes (PhOLEDs)

Benzoyltriptycene functions as a very good host material for blue, green, yellow and red dopants in PhOLED devices.

Amorphous host materials based on Tröger's base scaffold for application in phosphorescent organic light-emitting diodes

Tröger's bases (TBs) functionalized with carbazoles (TB-Czs) and phosphine oxides (TB-POs) were designed and synthesized as host materials for application in phosphorescent organic light-emitting diodes. The TB scaffold is shown to impart thermal stability with high Tg values (171-211 °C) as well as high triplet energies in the range of 2.9-3.0 eV. With a limited experimentation of the devices, it is shown that the TBs doped with a green phosphor, namely, Ir(ppy)3, permit impressive external efficiencies on the order of ca. 16% with a high brightness of ca. 3000-4000 cd/m2. Better device performance results are demonstrated by a small structural manipulation of the TB scaffold involving substitution of methyl groups in the core scaffold.

Twisted biaryl-amines as novel host materials for green-emissive phosphorescent organic light-emitting diodes (PhOLEDs)

Insertion of rigid biaryl moieties between two phenyl rings of CBP leads to host materials with improved thermal stabilities (T_gs ∼111–148 °C) and high triplet energies (2.63–2.83 eV) to permit their application as host materials for green phosphor, i.e., Ir(ppy)₃.

Organic amorphous hole-transporting materials based on Tröger's Base: alternatives to NPB

New Hole-Transporting Materials (HTMs) based on Tröger's Base scaffold serve as respectable alternatives of NPB with high T_gs.

Twist does a twist to the reactivity: stoichiometric and catalytic oxidations with twisted tetramethyl-IBX

The methyl groups in TetMe-IBX lower the activation energy corresponding to the rate-determining hypervalent twisting (theoretical calculations), and the steric relay between successive methyl groups twists the structure, which manifests in significant solubility in common organic solvents. Consequently, oxidations of alcohols and sulfides occur at room temperature in common organic solvents. In situ generation of the reactive TetMe-IBX from its precursor iodo-acid, i.e., 3,4,5,6-tetramethyl-2-iodobenzoic acid, in the presence of oxone as a co-oxidant facilitates the oxidation of diverse alcohols at room temperature.