Multi-center Dose Prediction Using Attention-aware Deep learning Algorithm Based on Transformers for Cervical Cancer Radiotherapy

AIMS

Accurate dose delivery is crucial for cervical cancer volumetric modulated arc therapy (VMAT). We aimed to develop a robust deep-learning (DL) algorithm for fast and accurate dose prediction of cervical cancer VMAT in multicenter datasets and then explore the feasibility of the DL algorithm to endometrial cancer VMAT with different prescriptions.

MATERIALS AND METHODS

We proposed the AtTranNet algorithm for three-dimensional dose prediction. A total of 367 cervical patients were enrolled in this study. Three hundred twenty-two cervical patients from 3 centers were randomly divided into 70%, 10%, and 20% as training, validation, and testing sets, respectively. Forty-five cervical patients from another center were selected for external testing. Moreover, 70 patients of endometrial cancer with different prescriptions were further selected to test the model. Prediction precision was evaluated by dosimetric difference, dose map, and dose-volume histogram metrics.

RESULTS

The prediction results were all clinically acceptable. The mean absolute error within the body in internal testing was 0.66 ± 0.63%. The maximum |δD| for planning target volume was observed in D98, which is 1.24 ± 2.73 Gy. The maximum |δD| for organs at risk was observed in Dmean of bladder, which is 4.79 ± 3.14 Gy. The maximum |δV| were observed in V40 of pelvic bones, which is 4.77 ± 4.48%.

CONCLUSION

AtTranNet showed the feasibility and reasonable accuracy in the dose prediction for cervical cancer in multiple centers. The model can also be generalized for endometrial cancer with different prescriptions without any transfer learning.

The application of the modified Snodgrass technique in hypospadias surgery

OBJECTIVE

We aimed to explore the effectiveness of the modified tubularized incised plate urethroplasty (Snodgrass Technique) in hypospadias surgery.

PATIENTS AND METHODS

A study was conducted on 50 pediatric patients with hypospadias treated in our hospital from May 2020 to May 2023. The patients were divided into two groups based on the condition of their urethral plate; 22 patients were included in the study group and 28 patients were included in the control group. The control group underwent the traditional Snodgrass technique, while the study group received the modified Snodgrass technique. The two groups were compared in terms of treatment efficacy, preoperative and postoperative 6-month Hypospadias Objective Scoring Evaluation (HOSE) scores, surgical data, and postoperative complications.

RESULTS

The operation time for the study group was longer than that of the control group, and the intraoperative blood loss was less, but the differences were not statistically significant (p > 0.05). The success rate of surgery in the study group was 95.45% (21/22), compared to 71.43% (20/28) in the control group, showing a statistically significant difference (p < 0.05). The maximum urinary flow rate at 3 and 6 months postoperatively was significantly higher in the study group than in the control group (p < 0.05). The time to maximum flow (TQmax) and post-void residual (PVR) at 3 and 6 months postoperatively were significantly lower in the study group (p < 0.05). A total of 3 patients in the cohort developed urethral fistulas, all between 0.10 cm x 0.10 cm and 0.15 cm x 0.15 cm in size. By instructing the patients to apply pressure to the fistula during urination, all fistulas closed between 3 and 6 months postoperatively. The incidence of postoperative complications was 4.55% in the study group and 28.57% in the control group, a difference that was statistically significant (p < 0.05).

CONCLUSIONS

The modified Snodgrass technique shows significant therapeutic effectiveness in hypospadias surgery, substantially increasing the success rate and reducing postoperative complications in pediatric patients, making it suitable for widespread application.

A Frameshift Variant of GluN2A Identified in an Epilepsy Patient Results in NMDA Receptor Mistargeting

N-methyl-D-aspartate receptors (NMDARs) are crucial for neuronal development and synaptic plasticity. Dysfunction of NMDARs is associated with multiple neurodevelopmental disorders, including epilepsy, autism spectrum disorder, and intellectual disability. Understanding the impact of genetic variants of NMDAR subunits can shed light on the mechanisms of disease. Here, we characterized the functional implications of a de novo mutation of the GluN2A subunit (P1199Rfs*32) resulting in the truncation of the C-terminal domain. The variant was identified in a male patient with epileptic encephalopathy, multiple seizure types, severe aphasia, and neurobehavioral changes. Given the known role of the CTD in NMDAR trafficking, we examined changes in receptor localization and abundance at the postsynaptic membrane using a combination of molecular assays in heterologous cells and rat primary neuronal cultures. We observed that the GluN2A P1199Rfs*32-containing receptors traffic efficiently to the postsynaptic membrane but have increased extra-synaptic expression relative to WT GluN2A-containing NMDARs. Using in silico predictions, we hypothesized that the mutant would lose all PDZ interactions, except for the recycling protein Scribble1. Indeed, we observed impaired binding to the scaffolding protein postsynaptic protein-95 (PSD-95); however, we found the mutant interacts with Scribble1, which facilitates the recycling of both the mutant and the WT GluN2A. Finally, we found that neurons expressing GluN2A P1199Rfs*32 have fewer synapses and decreased spine density, indicating compromised synaptic transmission in these neurons. Overall, our data show that GluN2A P1199Rfs*32 is a loss-of-function variant with altered membrane localization in neurons and provide mechanistic insight into disease etiology.

Improved Energy Harvesting Ability of Single-Layer Binary Fiber Nanocomposite Membrane for Multifunctional Wearable Hybrid Piezoelectric and Triboelectric Nanogenerator and Self-Powered Sensors

While wearable self-powered electronic devices have shown promising improvements, substantial challenges persist in enhancing their electrical output and structural performance. In this work, a working mechanism involving simultaneous piezoelectric and triboelectric conversion within a monolayer-structured membrane is proposed. Single-layer binary fiber nanocomposite membranes (SBFNMs) (PVDF/CNTX@PAN/CNTX, DPCPCX) with two distinct interpenetrating nanocomposite fibers were created through co-electrospinning, incorporating multiwalled carbon nanotubes (CNTs) into polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN), respectively. The resulting membrane demonstrated an exceptional synergistic effect of piezoelectricity and triboelectricity along with a high machine-to-electric conversion capability. The addition of CNTs increased the PVDF β-phase and the PAN planar zigzag conformation. As a result, the DPCPC0.5-SBFNMs-based piezoelectric nanogenerator exhibited excellent electrical output (187 V, 8.0 μA, and 1.52 W m-2), maintaining an exceptionally high level of output voltage compared with other piezoelectric nanogenerators. It successfully illuminated 50 commercial light-emitting diodes simultaneously. The output voltage of DPCPC0.5-SBFNMs was 5.1 and 4.6 times higher than that of PAN or PVDF single-fiber membranes, respectively. Furthermore, the peak voltage of DPCPC0.5-SBFNMs exceeded that of co-electrospinning PVDF/CNT1.0@PAN (DPCP1.0) and PVDF@PAN/CNT1.0 (DPPC1.0) by 20 and 10 V, respectively. The piezoelectric sensor made of DPCPC0.5-SBFNMs accurately sensed human movement, ranging from tiny to large, and demonstrated utility as an alarm in medical treatment, fire fighting, and monitoring. Endogenous triboelectricity is proposed in SBFNM piezoelectric materials, enhancing electromechanical conversion and electrical output capacity, thereby promising a wide application potential in self-powered wearable electronic devices.

3D Printing of High Viscosity UV-Curable Resin for Highly Stretchable and Resilient Elastomer

Elastomers prepared via vat photopolymerizationus ually exhibit unsatisfied mechanical properties owing to their insufficient growth of molecular weight upon UV exposure. Increasing the weight ratio of oligomer in the resin system is an effective approach to enhance the mechanical properties, yet the viscosity of the UV-curable resin increases dramatically; this hinders its printing. In this study, a linear scan-based vat photopolymerization (LSVP) system which can print high-viscosity resins is implemented to 3D print the oligomer-dominated UV-curable resin via a dual-curing mechanism. A polyurethane methacrylate blocking oligomer is first synthesized and then mixed with a commercialized bifunctional oligomer, photoinitiator, and primary amine as a chain extender to prepare high-viscosity UV-curable resin for the LSVP system. The deblocked isocyanate is further crosslinked with a chain extender via thermal treatment to construct a highly entangled polymer chain network. The optimal thermal treatment parameters are investigated, and the resilience of the 3D-printed elastomer is evaluated through continuous tensile loading and unloading tests. Subsequently, complex structured elastomers are printed, exhibiting favorable mechanical durability without defects. The results obtained from this work will provide a reference for preparing elastomeric devices with excellent physical properties and expand the application scope of vat photopolymerization to new fields.

3D printing of ultra-high viscosity resin by a linear scan-based vat photopolymerization system

The current printing mechanism of the bottom-up vat photopolymerization 3D printing technique places a high demand on the fluidity of the UV-curable resin. Viscous high-performance acrylate oligomers are compounded with reactive diluents accordingly to prepare 3D printable UV-curable resins (up to 5000 cps of viscosity), yet original mechanical properties of the oligomers are sacrificed. In this work, an elaborated designed linear scan-based vat photopolymerization system is developed, allowing the adoption of printable UV-curable resins with high viscosity (> 600,000 cps). Briefly, this is realized by the employment of four rollers to create an isolated printing area on the resin tank, which enables the simultaneous curing of the resin and the detachment of cured part from the resin tank. To verify the applicability of this strategy, oligomer dominated UV-curable resin with great mechanical properties, but high viscosity is prepared and applied to the developed system. It is inspiring to find that high stress and strain elastomers and toughened materials could be facilely obtained. This developed vat photopolymerization system is expected to unblock the bottleneck of 3D printed material properties, and to build a better platform for researchers to prepare various materials with diversiform properties developed with 3D printing.

The diagnostic accuracy of the IFLIP system for binocular visual function anomalies assessment

OBJECTIVE

This study aimed to evaluate the diagnostic accuracy of the intelligent flipper (IFLIP) system in identifying binocular vision anomalies.

PATIENTS AND METHODS

This study comprised 70 participants aged 18 to 22. Participants underwent comprehensive eye assessments, including measurement of visual acuity, refraction, far and near cover test, stereopsis, and worth four dot test. The manual accommodation amplitude and facility, as well as the IFLIP system test, were also evaluated. The correlation between the indices of the IFLIP and manual accommodation tests was analyzed using multiple regression models, and the diagnostic ability of the IFLIP was characterized using Receiver Operating Curve (ROC) analysis. The significance level was 0.05.

RESULTS

The mean age of the 70 participants was 20.03±0.78 years. The mean manual and IFLIP accommodation facilities were 12.00±3.70 cycle per minute (CPM) and 10.01±2.77 CPM, respectively. No correlation was found between the indices of the IFLIP system and manual accommodative amplitude. However, the regression model showed that the contraction/relaxation ratio of the IFLIP system was positively correlated to the manual accommodation facility, and the average contraction time was negatively correlated with the manual accommodation facility. The ROC analysis proposed a cut-off of 10.15 CPM monocularly for the IFLIP accommodation facility assessment.

CONCLUSIONS

This study indicated that the parameters obtained by the IFLIP system and the manual accommodation facility were comparable, and the IFLIP system had good sensitivity and specificity in the assessment of the accommodation facility, thus may serve as a promising tool for screening and diagnosis of binocular visual function anomalies in clinical and community settings.

Multifunctional magnesium-organic framework doped biodegradable bone cement for antibacterial growth, inflammatory regulation and osteogenic differentiation

Degradable bone cement has superior osteoconductivity and plasticity and is commonly used to treat defects greater than the critical-size. Magnesium gallate metal-organic frameworks (MOFs) (Mg-MOF), with antibacterial and anti-inflammatory properties, are doped into a composite cement composed of calcium sulfate, calcium citrate, and dicalcium hydrogen phosphate anhydrous (CS/CC/DCPA). The doping of the Mg-MOF slightly influences the microstructure and curing properties of the composite cement, with the mechanical strength of the cement displaying a significant increase from 27 to 32 MPa. Antibacterial tests reveal that the Mg-MOF bone cement has excellent antibacterial characteristics and can effectively inhibit bacterial growth in 4 h (Staphyloccocus aureus survival rate <10%). Herein, lipopolysaccharide (LPS)-induced macrophage models are used to investigate the anti-inflammatory characteristics of composite cement. The Mg-MOF bone cement can regulate the inflammatory factors and polarization of macrophages (M1 and M2). In addition, the composite cement promotes cell proliferation and osteo-differentiation of mBMSCs, and the activity of alkaline phosphatase and calcium nodules are increased. The bone related transcription factor and specific proteins, such as runt-related transcription factor 2 (Runx2), bone morphogenetic protein 2, osteocalcin (OCN), osteopontin (OPN), and collagen type 1 (COL1), were highly expressed by the Mg-MOF bone cements. Therefore, Mg-MOF doped CS/CC/DCPA bone cement is multifunctional for bone repair, which will promote bone formation and avoid the infection of wounds, and it is suitable for use with non-load-bearing bone defects.

Prediction of knee pain improvement over two years for knee osteoarthritis using a dynamic nomogram based on MRI-derived radiomics: a proof-of-concept study

OBJECTIVES

To develop and validate a nomogram to detect improved knee pain in osteoarthritis (OA) by integrating magnetic resonance imaging (MRI) radiomics signature of subchondral bone and clinical characteristics.

METHODS

Participants were selected from the Vitamin D Effects on Osteoarthritis (VIDEO) study. The primary outcome was 20% improvement of knee pain score over 2 years in participants administrated either vitamin D or placebo. Radiomics features of subchondral bone and clinical characteristics from 216 participants were extracted and analyzed. The participants were randomly split into the training and validation cohorts at a ratio of 8:2. Least absolute shrinkage and selection operator (LASSO) regression was used to select features and generate radiomics signatures. The optimal radiomics signature and clinical indicators were fitted into a nomogram using multivariable logistic regression model.

RESULTS

The nomogram showed favorable discrimination performance [AUC_training, 0.79 (95% CI: 0.72-0.79), AUC_validation, 0.83 (95% CI: 0.70-0.96)] as well as a good calibration. Additional contributing value of fusion radiomics signature to the nomogram was statistically significant (NRI, 0.23; IDI, 0.14, P < 0.001 in training cohort and NRI, 0.29; IDI, 0.18, P < 0.05 in validating cohort). Decision curve analysis confirmed the clinical usefulness of nomogram.

CONCLUSION

The radiomics-based nomogram comprising the MR radiomics signature and clinical variables achieves a favorable predictive efficacy and accuracy in differentiating improvement in knee pain among OA patients. This proof-of-concept study provides a promising way to predict clinically meaningful outcomes.

[Analysis of the diagnostic performance of MRI Liver Imaging Reporting and Data System version 2018 for intrahepatic parenchymal substantial lesions ≤3.0 cm]

Objective: To investigate the diagnostic performance of MRI Liver Imaging Reporting and Data System version 2018 in high-risk hepatocellular carcinoma (HCC) patients with intrahepatic parenchymal substantial lesions ≤3.0 cm. Methods: A retrospective analysis was conducted in hospitals between September 2014 to April 2020. 131 pathologically confirmed non-HCC cases with lesions ≤3.0 cm in diameter were randomly matched with 131 cases with lesions ≤3.0 cm in diameter and divided into benign (56 cases), other hepatic malignant tumor (OM, 75 cases), and HCC group (131 cases) in a 1:1 ratio. MRI features of the lesions were analyzed and classified according to LI-RADS v2018 criteria (tie-break rule was applied to lesions with both HCC and LR-M features). Taking the pathological results as the gold standard, the sensitivity and specificity of the LI-RADS v2018 classification criteria and the more stringent LR-5 criteria (with three main signs of HCC at the same time) were calculated for HCC, OM or benign lesions diagnosis. Mann -Whitney U test was used to compare the classification results. Results: The number of cases classified as LR-M, LR-1, LR-2, LR-3, LR-4, and LR-5 in HCC group after applying the tie-break rule were 14, 0, 0, 12, 28, and 77, respectively. There were 40, 0, 0, 4, 17, 14 and 8, 5, 1, 26, 13, 3 cases in benign and OM group, respectively. There were 41 (41/77), 4 (4/14) and 1 (1/3) lesion case in the HCC, OM and benign group, respectively, that met the more stringent LR-5 criteria. The sensitivity of LR-4 combined with LR-5 (LR-4/5) criteria, LR-5 criteria and more stringent LR-5 criteria for HCC diagnosis were 80.2% (105/131), 58.8% (77/131) and 31.3% (41/131), respectively, and the specificity were 64.1% (84/131), 87.0% (114/131) and 96.2% (126/131), respectively. The sensitivity and specificity of LR-M were 53.3% (40/75) and 88.2% (165/187), respectively. The sensitivity and specificity using LR-1 combined with LR-2 (LR-1/2) criteria for the diagnosis of benign liver lesions were 10.7% (6/56) and 100% (206/206), respectively. Conclusions: LR-1/2, LR-5, and LR-M criteria have high diagnostic specificity for intrahepatic lesions with a diameter of ≤3.0 cm. Lesions classified as LR-3 are more likely to be benign. The specificity of LR-4/5 criteria is low, while the more stringent LR-5 criteria has a high specificity for HCC diagnosis.

Sarcomatoid Eccrine Porocarcinoma in a Patient with Urothelial Carcinoma

Introduction/Objective

Sarcomatoid porocarcinoma of skin is an exceedingly rare and diagnostically challenging malignancy of the sweat gland. In this report, we describe a rare case of a sarcomatoid eccrine porocarcinoma initially diagnosed to be a squamous cell carcinoma (SCC) in a patient with metastatic urothelial carcinoma (UC).

Methods/Case Report

Our patient is a 60 year old male with stage IV, poorly differentiated UC status post TURBT with residual tumor, and a 4 x 3 x 1 cm, polypoid, ulcerating skin nodule on his right cheek presumptively diagnosed to be an SCC on biopsy at an outside hospital. Given the concern that this cutaneous lesion may be a metastatic UC with squamous differentiation, the skin nodule was re-biopsied at our hospital. On histology, the lesion consisted of sheets of squamoid, polygonal cells in the dermis with pleomorphic nuclei showing irregular contours, prominent nucleoli, coarse chromatin, and frequent mitoses. The tumor was focally connected to the epidermis, which established it as a primary skin neoplasm and not a metastatic lesion. The tumor cells stained diffusely positive for vimentin, AE1/AE3, CK5/6, HMW CK, CK7, p63, and p16, negative for CK20, GATA-3, BerEP4, and Sox10, and showed high Ki67 proliferation index. Within the tumor sheets were poorly formed, focal ductal elements that stained positive for CAM5.2, EMA, CEA, and CK19, and negative for p63. The tumor showed comedo necrosis, epidermal ulceration, and no keratinization. The tumor was diagnosed to be a porocarcinoma given its positive staining for CK7 and p16, presence of focal ductal elements, and epidermal connection, with sarcomatoid features indicated by strong vimentin expression.

Results (if a Case Study enter NA)

NA.

Conclusion

In this report, we described an exceedingly rare, diagnostically challenging case of a sarcomatoid porocarcinoma initially suspected to be a cutaneous SCC or metastatic UC with squamous differentiation. Although the tumor cells morphologically resembled SCC, its positive staining for CK7 and p16, presence of ductal elements, and lack of keratinization, favored a diagnosis of porocarcinoma rather than cutaneous SCC. Its focal connection to the epidermis and lack of GATA-3 expression favored a primary skin neoplasm rather than a metastatic UC. Its sarcomatoid nature was indicated by strong vimentin expression. Sarcomatoid porocarcinoma is diagnostically challenging given its rarity and potential to mimic other cutaneous malignancies such as SCC.

A Scalp Metastatic Follicular Thyroid Carcinoma with a Silent Thyroid History and Normal Thyroid Uptake by PET-CT

Introduction/Objective

Follicular thyroid carcinoma (FTC) accounts for 10%-15% of all primary thyroid cancers. Follicular thyroid cancer is known to metastasize hematogenously, with distant metastasis occurring in 6-20% of cases. Scalp metastasis with an underlying thyroid carcinoma is an exceedingly rare clinical entity; there are less than 15 case reports in the literature. 1-2. Here, we present a case of widely invasive FTC with skull metastases located on the parietal calvarium. The scalp mass was confirmed as follicular thyroid carcinoma via microscopic morphology and positive immunoreactivity for Vimentin, TTF1, thyroglobulin, and PAX8. We present this case not only because of the diagnostic challenge and rare scalp metastasis, but also because of the patient’s unusual “silent” thyroid medical history and no abnormal thyroid uptake by PET-CT.

Methods/Case Report

81-year-old female presenting 2-year history of right parietal scalp mass, which was previously suspected for lipoma with attempted resection in Mexico but interrupted due to severe hemorrhage. No palpable thyroid nodule was noted. PET-CT showed avid lesions of the right breast with nipple retraction, as well as avid suspicious lesions of bilateral lungs, calvarium, xiphoid process, right acetabulum, T spine most c/f widely metastatic cancer, most likely a breast primary; evaluation of the neck demonstrates physiologic FDG-activity in the thyroid. Thyroid studies showed hyperthyroidism: TSH (L) &lt;0.010 uIU/mL; Free T3 (H) 4.7 pg/mL and Free T4 1.00 ng/d. The patient was performed Ultrasound-guided FNA and core biopsy of the large parietal scalp lesion, however, FNA of the cystic component was nondiagnostic (no malignant cells seen).

Results (if a Case Study enter NA)

NA.

Conclusion

Core biopsy of the large parietal mass the tumor cells tend to form follicular or microfollicular architecture with colloid present, but no papillary nuclear features. Rare mitotic figures are seen. IHC stain of tumor cells are positive for AE1/AE3, Cam5.2, CK7, TTF1, thyroglobulin, PAX8, and Vimentin, which show strong evidence for metastatic follicular thyroid carcinoma (FTC) origin. Tumor cells are negative for Napsin-A, P63, Synaptophysin, Ck5/6, Ck20, EMA, WT1, CDX2, GATA3, Mammaglobin, ER, PR, and BRST2, which helps rule out the primary malignancy from lung, breast, neuroendocrine or other adenocarcinomas.

Metastasis of a Primary Sinonasal Alveolar Rhabdomyosarcoma to the Testicle in an Adult Patient

Introduction/Objective

Alveolar rhabdomyosarcoma is an aggressive tumor of skeletal muscle differentiation that predominantly affects adolescents and young adults, and is rare over 45 years of age. It has poor prognosis with metastasis, and most commonly spreads to the lymph nodes, bone marrow, and lungs. In this report, we describe a middle-aged patient with a primary sinonasal alveolar rhabdomyosarcoma which metastasized to the right testicle, an unusual metastatic site reported only a few times in literature.

Methods/Case Report

Our patient is a 53 year old male who presented in 2020 with recurrent epistaxis and bilateral cervical lymphadenopathy over a 2 month period. Maxillofacial CT/MRI imaging revealed a 4-cm sized mass within the left nasal cavity eroding into the ethmoid sinuses. The patient underwent endoscopic sinus surgery of the sinonasal mass, which on histology, appeared as poorly differentiated small round blue cells with numerous mitoses infiltrating as single cells and nests. These cells stained positive for vimentin, myogenin, desmin, and CD56, and negative for AE1/AE3, chromogranin, S-100, CD99, and CD45. The cells showed very high Ki67 proliferation index (70-80%) and tested positive for FOXO1 gene rearrangement, which supported the diagnosis of alveolar rhabdomyosarcoma. The patient completed chemoradiation therapy, and MRI scans over the next 2 years were negative for residual sinonasal tumor. However, the patient returned in 2022 after having undergone a right orchiectomy at an outside hospital for testicular pain, and abdominal CT showed diffuse retroperitoneal lymphadenopathy concerning for metastasis. On histology, the resected testicle showed seminiferous tubules infiltrated and destroyed by sheets of poorly differentiated small round blue cells with fibrous septae separating the nests of tumor cells into alveolar-like spaces with central loss of cohesion. The tumor cells showed the same immunohistochemical staining pattern as the primary sinonasal lesion, thus confirming it to be metastatic alveolar rhabdomyosarcoma.

Results (if a Case Study enter NA)

NA.

Conclusion

It is unusual for alveolar rhabdomyosarcomas to occur in adults over 45 years old, and is even rarer for these tumors to metastasize to the testicle. Metastases also only account for 1% of testicular tumors. Our report documents a very rare case of an alveolar rhabdomyosarcoma in a middle-aged adult which metastasized to the testicle after chemoradiation therapy.

Bioinspired Anti-demineralization Enamel Coating for Orthodontics

White spot lesions and enamel cracks are the 2 most prominent diseases that occur after orthodontic treatment and are caused by enamel demineralization from accumulated bacterial biofilms and/or enamel damage caused by the removal of residual adhesive after bracket debonding. Inspired by the self-assembled amelogenin nanoribbons in enamel, we developed an enamel coating with a self-assembling antimicrobial peptide, D-GL13K, to simultaneously reduce demineralization and residual adhesive. The self-assembled amphiphilic nanoribbons significantly increased the hydrophobicity of the etched enamel, which reduced the permeability of the coated enamel surfaces as desired. The antimicrobial activity of this coating was evaluated against Streptococcus mutans by colony-forming unit counting and live/dead assays. The anti-demineralization effect was demonstrated by the reduced demineralization depth analyzed by optical coherence tomography and the increased Vickers hardness. The coatings did not reduce the shear bond strength but significantly reduced the adhesive remnant index score. This bioinspired enamel coating may provide a new strategy for preventing white spot lesions and enamel cracks after orthodontic treatment.

Validating and optimizing mismatch tolerance of Doppler backscattering measurements with the beam model (invited)

We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplitude of the actual density fluctuations. Previous preliminary comparisons between the model and Mega-Ampere Spherical Tokamak (MAST) plasmas were promising. In this work, we quantitatively account for this effect on DIII-D, a conventional tokamak. We compare the predicted and measured mismatch attenuation in various DIII-D, MAST, and MAST-U plasmas, showing that the beam model is applicable in a wide variety of situations. Finally, we performed a preliminary parameter sweep and found that the mismatch tolerance can be improved by optimizing the probe beam's width and curvature at launch. This is potentially a design consideration for new DBS systems.

Effects of various preservation treatments on diversity and abundance of microbial community in rice product (MiBa) during storage

To determine the most effective preservation method for MiBa (a traditional Chinese rice product), MiBa treated with 75% alcohol, 75% alcohol + inhibitor, ozone treatment; untreated (control); and raw rice were subjected to 16S rRNA gene and ITS three-generation sequencing by High-throughput Sequencing Technology. According to the results the preservation effects of different treatment methods ranked as follows: ozone treatment >75% alcohol treatment >75% alcohol+inhibitor > control. Bacterial composition analysis showed that the bacterial community on the surface of MiBa treated with ozone was dominated by genera Leuconostoc and Serratia. The fungal community consisted mainly of Aspergillus and Alternaria. In summary, ozone treatment proved to be the most effective in inhibiting microbial contamination during the storage of MiBa, effectively extending its shelf life.

Calf Circumference and All-Cause Mortality: A Systematic Review and Meta-Analysis Based on Trend Estimation Approaches

OBJECTIVES

To perform a systematic review and meta-analysis and quantify the associations of total mortality with calf circumference (CC) in adults 18 years and older via combining various analyses based on empirical dichotomic CC, continuous CC, and dose-response CC.

METHODS

We conducted a systematic search of relevant studies in PubMed, EMBASE, Cochrane Library, and Web of Science published through April 12, 2022. This systematic review includes longitudinal observational studies reporting the relationships of total mortality with CC. We calculated the pooled relative risk (RR) and 95% confidence interval (CI) of total mortality with CC per 1 cm for each study and combined the values using standard meta-analysis approaches. Newcastle-Ottawa scale (NOS), Grading of Recommendations, Assessment, Development and Evaluations approach (GRADE), and the Instrument for assessing the Credibility of Effect Modification Analyses (ICEMAN) were assessed for meta-analyses.

RESULTS

Our analysis included a total of 37 cohort studies involving 62,736 participants, across which moderate heterogeneity was observed (I2=75.7%, P<0.001), but no publication bias was found. Study quality scores ranged from 6 to 9 (mean 7.7), with only three studies awarded a score of 6 (fair quality). We observed an inverse trend between total death risk and CC per 1 cm increase (RR, 0.95, 95% CI, 0.94-0.96; P<0.001; GRADE quality=high). Only a very slight difference was found among residents of nursing homes (6.9% mortality risk reduction per one cm CC increase), community-dwellers (5.4%), and those living in hospitals (4.8%), respectively (P for meta-regression=0.617). Low credible subgroup difference was found based on the ICEMAN tool.

CONCLUSIONS

Calf circumference is a valid anthropometric measure for mortality risk prediction in a community, nursing home, or hospital.

Biphasic Sarcomatoid Sweat Gland Carcinoma With Ductal Epithelial And Spindled Myoepithelial Cell Components (Malignant Mixed Tumor Of Skin)

Introduction/Objective

Sweat gland carcinomas are a group of malignant skin adnexal tumors that are difficult to diagnose due to their rarity, wide morphologic variation, and limited literature on diagnosis and classification. These tumors may appear bland and morphologically resemble benign skin adnexal tumors, or may appear poorly differentiated and mimic metastatic carcinoma especially from a breast primary. Biphasic sweat gland carcinomas are an even rarer entity, with only few cases reported in literature, and have been described to consist of a well- differentiated ductal epithelial component and a poorly differentiated, sarcomatoid, spindle cell component.

Methods/Case Report

Our case report describes a 53 year old female referred to our institution for diagnosis of an excised skin lesion of the right upper arm, which had been slowly growing for 8 years. The histology revealed a biphasic malignant neoplasm involving the dermis and subcutis. The tumor consisted of an epithelial cell component with glandular and squamoid morphology and positive for CK5/6, CK7, and CAM5.2, and a spindled myoepithelial cell component with sarcomatoid morphology and positive for S100, vimentin, and p63. Stains for CK20, ER, PR, PAX8, CEA, and TTF1 were negative. The histological and clinical findings favored a primary skin adnexal tumor, rather than a metastatic lesion.

The patient underwent wide local excision of the lesion given that margins of the original excision were indeterminate. The histology of this re-excision demonstrated the same biphasic tumor with ductal epithelial and sarcomatoid myoepithelial cell components positive for the same stains. Although margins were negative in this re-excision, 3-4 months later, the patient developed dyspnea with multiple new pulmonary and hilar masses discovered on imaging, and new-onset headache with a frontal lobe mass discovered on brain imaging. These masses were biopsied/resected, and revealed to be metastases of the original cutaneous tumor positive for the same markers.

Results (if a Case Study enter NA)

NA

Conclusion

This case report describes a rare, diagnostically challenging case of a biphasic sweat gland carcinoma with ductal epithelial and sarcomatoid myoepithelial cell components, which demonstrated aggressive behavior with distant metastasis. These tumors are a clinicopathological quandary given their rarity and the paucity of literature on their characterization.

Skin Involvement by Erdheim-Chester Disease; A Case Report

Introduction/Objective

Erdheim-Chester Disease (ECD) is considered one of the rare forms of non-Langerhans cell histiocytosis. It is caused by infiltration of different organs with lipid-laden histiocytes with foamy cytoplasm. Clinically, it can present as an indolent localized disease or a fatal disease with multi-organ failure.

Methods/Case Report

Here we report a case of fifty year-old female with a history of Erdheim Chester disease involvement of the left parietal lobe presented to the dermatology clinic with purpuric, tender maculopapular rash on bilateral cheeks, trunk, and bilateral upper extremities. Biopsy of the lesion on central chest revealed acute and chronic superficial dermal inflammation and skin crusting. The dermis is also infiltrated by many foamy lipid-laden macrophages. These macrophages stained with CD68 and CD163 and were S-100 and CD1a negative. BRAF V600E mutation was detected. Based on the immunophenotypic characteristics, as well as the molecular testing results and the clinical history of the patient, diagnosis of cutaneous involvement by Erdheim- Chester disease was made.

Results (if a Case Study enter NA)

NA

Conclusion

In summary, despite the fact that skin involvement by Erdheim- Chester disease is rare, it is imperative to consider it in the differential diagnosis of histiocytic diseases affecting the skin and differentiate it from its histologic mimickers. Molecular testing is a helpful tool in the diagnosis of Erdheim-Chester disease. Accurate diagnosis is crucial for guiding treatment plans.

Phageome-based vaccination and human innate immune modulation could be a useful strategy to control human Coronavirus infections

Human Coronavirus (CoV) infections, including SARS-COV, MERS-COV, and SARS-CoV-2, usually cause fatal lower and upper respiratory tract infections due to exacerbated expression of pro-inflammatory cytokines and chemokines. We aim to summarize different aspects, such as CoV immune evasion mechanisms and host innate immune response to these infections, and their role in pathogenesis. We have also elaborated the up-to-date findings on different vaccine development strategies and progress against CoVs in both humans and non-human models. Most importantly, we have described the Phageome-human immune interaction, its therapeutic usage as anti-viral, anti-inflammatory agent, and implications for multiple vaccine development systems. The data suggest that endogenous phages might play a vital role in eliminating the infection and regulating the body's immune system. Considering the innate-immune-induced pathogenesis against CoVs and the therapeutic aptitude of phageome, we propose that the prophylactic administration of phages and phage-based vaccines could be a useful strategy to control the emerging CoV infections.

Case Report: Coexistence of Adenoid Cystic Carcinoma and Adenoid Basal Carcinoma in the Uterine Cervix

Introduction/Objective

Adenoid cystic carcinoma (ACC) and adenoid basal carcinoma (ABC) are very rare tumors, accounting for less than 1% of all cervical adenocarcinomas. ACC is an aggressive neoplasm and has poor prognosis while ABC has a favorable prognosis. Coexistence of ACC or ABC and squamous intraepithelial lesion/invasive squamous cell carcinoma in the uterine cervix has been reported in the literature; however, coexistence of ACC and ABC in the uterine cervix is very rare.

Methods

Case presentation: Here we present a case of coexistence ACC and ABC in a 66-year-old woman who suffered from heavy bloody vaginal discharge for one year with weight fluctuations. The cervical exam and CT scan showed a friable mass at the uterine cervix, measuring up to 5.5 cm, and cervical mass punch biopsy was performed. Histopathological examination of the specimen revealed an intact nonkeratinizing stratified squamous epithelium overlying proliferation of nests punctuated by small round spaces, resembling cribriform pattern in the stroma. The tumor cells were small and basaloid with hyperchromatic nuclei and scant cytoplasm. Palisading of tumor cells at the peripheral of the tumor nests were observed in some areas. Mitotic figures and necrosis were not seen.

Immunohistochemical stains were performed and showed two distinct patterns of ACC and ABC. ACC tumor cells were positive for CD117, focally positive for CAM5.2 and S100, and negative for p63. ABC tumor cells were positive for p63 and EMA and negative for CD117 and S100. Both ACC and ABC components were positive for p16, Sox 10, BCL-2 and vimentin and negative for CK7, p40, CEA and ER. PAS stain showed positive staining in the basement membrane-like material in ACC component. A final pathologic diagnosis of coexistence of ACC and ABC of the uterine cervix were made.

Conclusion

Literature review revealed that this was an exceedingly rare case of coexistence of ACC and ABC in the uterine cervix. It is extremely important to correctly diagnose ACC and ABC as there is very poor prognosis in the former and good prognosis in the latter.

High-Performance Cyanate Ester Resins with Interpenetration Networks for 3D Printing

As the 3D printing technology is getting more and more popular and useful, demands for materials for 3D printing have increased significantly. Cyanate ester (CE) resin possesses the characteristics of high heat distortion temperature and high glass transition temperature, outstanding mechanical properties, low dielectric constant, and excellent water uptake. However, CE resin has not been widely used in 3D printing of UV curing because it is difficult for photopolymerizable groups to graft onto the chains of CE resin. On the other hand, the glass transition temperature (T_g) of the homopolymer of the tris(2-hydroxyethyl)isocyanurate triacrylate (THEICTA) outclasses that of other acrylates. Although THEICTA is particularly advantageous to prepare a UV-curing prepolymer with high glass transition temperature, it also cannot be directly used for fabricating heat-resistant 3D-printed parts because it is solid and adding diluents will reduce the thermal stability of printed objects. This study is unique in producing 3D-printed materials, in which the THEICTA tactfully dissolves in low viscosity (about 100 mPa·s under 25 °C) bisphenol E cyanate (BECy) without sacrificing two kinds of bulk material properties. In the process of 3D printing, the carbon-carbon double bonds from THEICTA are cured by radical polymerization. Postprinting thermal treatment transforms three cyanate groups to a triazine ring structure. Additionally, the two kinds of structures are interpenetrating. The high-performance 3D-printing material has potential in fields ranging from space flight and aviation to the automotive and electronic industry.

Genomic and transcriptional heterogeneity of multifocal hepatocellular carcinoma

BACKGROUND

Hepatocellular carcinoma (HCC) often presents with multiple nodules within the liver, with limited effective interventions. The high genetic heterogeneity of HCC might be the major cause of treatment failure. We aimed to characterize genomic heterogeneity, infer clonal evolution, investigate RNA expression pattern and explore tumour immune microenvironment profile of multifocal HCC.

PATIENTS AND METHODS

Whole-exome sequencing and RNA sequencing were carried out in 34 tumours and 6 adjacent normal liver tissue samples from 6 multifocal HCC patients. Protein expression of Ki67, AFP, P53, Survivin and CD8 was detected by immunohistochemistry. Fluorescence in situ hybridization was carried out to validate the amplification status of sorafenib-targeted genes.

RESULTS

We deciphered genomic and transcriptional heterogeneity among tumours in each multifocal HCC patient including mutational profiles, copy number alterations, tumour evolutionary trajectory and tumour immune microenvironment profiles. Of note, sorafenib-targeted alterations were identified in the trunk of phylogenetic tree in only one out of the six patients, which may explain the relative low treatment response rate to sorafenib in clinical practice. Moreover, we demonstrated RNA expression patterns and tumour immune microenvironment profiles of all nodules. We found that RNA expression pattern was associated with Edmondson-Steiner grading. Based on the differential expression of 66 reported immune markers, unsupervised hierarchical clustering analysis of 34 nodules identified immune subsets: one low expression cluster with seven nodules and one high expression cluster with 11 nodules. CD8+ T cells were more enriched in nodules of the high expression cluster.

CONCLUSIONS

Our study provided a detailed view of genomic and transcriptional heterogeneity, clonal evolution and immune infiltration of multifocal HCC. The heterogeneity of druggable targets and immune landscape might help interpret the clinical responsiveness to targeted drugs and immunotherapy for multifocal HCC patients.

Arabidopsis nucleoporin CPR5 controls trichome cell death through the core cell cycle regulator CKI

The Arabidopsis trichome is a polyploid epidermal cell resulting from multiple rounds of endocycles. The CYCLIN-DEPENDENT KINASE INHIBITOR (CKI) family proteins are core cell cycle regulators that promote the endocycle. CONSTITUTIVE EXPRESSION OF PR GENES 5 (CPR5) is a plant-specific nucleoporin. It has been found that two Arabidopsis CKI, SIAMESE (SIM) and SIAMESE-RELATED 1 (SMR1), function downstream of CPR5 to activate plant effector-triggered cell death. The sim smr1 double mutants form multicellular and clustered trichomes, while the cpr5 mutants produce dead and branchless trichomes. This study explored roles of the CPR5-CKI signalling pathway in trichome cell cycle transition. To examine the underlying mechanism of how cell cycle transition is regulated in plant trichomes, Trypan blue staining, flow cytometry, scanning electron microscopy (SEM) and nuclear DNA measurement were conducted. The native promoter-driven CKI and GUS fusion reporter showed that both SIM and SMR1 proteins were preferentially expressed in trichomes. The cpr5-induced dead and branchless trichomes were fully suppressed by the sim smr1 double mutant, suggesting that SIM and SMR1 function downstream of CPR5 in trichome development. Flow cytometry analysis showed that as compared to the number of 2C (C = DNA content in a haploid nucleus) cells, the number of 4C cells significantly increased, whereas that of polyploidy cells (8C and 16C) dramatically decreased in the cpr5 mutant. The elevated 4C/2C ratio in the cpr5 mutant is consistent with de-repression of pro-endocycle regulators SIM and SMR1. The polyploidy cells (8C and 16C) may be selectively targeted to cell death, which is therefore attributed to the branchless trichomes in the cpr5 mutant. Nuclear DNA content analysis demonstrated that the nuclear DNA content of trichomes in the cpr5 sim mutant was significantly higher than in the sim mutant, indicating that CPR5 is a negative endocycle regulator in trichomes. This study reveals that the CPR5-CKI signalling pathway controls trichome cell cycle transition and excessive endocycles are required for cell death in plant trichomes.

3D Printing Mechanically Robust and Transparent Polyurethane Elastomers for Stretchable Electronic Sensors

Advanced stretchable electronic sensors with a complex structure place higher requirements on the mechanical properties and manufacturing process of the stretchable substrate materials. Herein, three kinds of polyurethane acrylate oligomers were synthesized successfully and mixed with a commercial acrylate monomer (isobornyl acrylate) to prepare photocurable resins with a low viscosity for a digital light processing three-dimensional (3D) printer without custom equipment. Results showed that the resin containing poly(tetrahydrofuran) units (PPTMGA-40) exhibited optimal mechanical properties and shape recoverability. The tensile strength and elongation at break of PPTMGA-40 were 15.7 MPa and 414.3%, respectively. The unprecedented fatigue resistance of PPTMGA-40 allowed it to withstand 100 compression cycles at 80% strain without fracture. The transmittance of PPTMGA-40 reached 89.4% at 550 nm, showing high transparency. An ionic hydrogel was coated on the surface of 3D-printed structures to fabricate stretchable sensors, and their conductivity, transparency, and mechanical performance were characterized. A robust piezoresistive strain sensor with a high strength (∼6 MPa) and a wearable finger guard sensor were fabricated, demonstrating that this hydrogel-elastomer system can meet the requirements of applications for advanced stretchable electronic sensors and expand the usage scope.

Structure-Property Relationship of Stereolithography Resins Containing Polysiloxane Core-Shell Nanoparticles

Stereolithography (SL) is an additive manufacturing technique for fabricating bulk and delicate objects layer by layer using UV-curable resin. However, epoxy-based photocurable resins used in SL printers are commonly brittle due to the high cross-linking density, thus restricting the widespread adoption of SL. In an effort to overcome this drawback, this paper details an approach of toughening the resulting workpieces by incorporating polysiloxane core-shell nanoparticles (SCSP) into an epoxy-based, photocurable formulation. This approach attempted to attain both thermal stabilities and transparency qualities comparable to that of resin without SCSP. This work systematically analyzed how the shell thickness of the SCSP impacted the final properties of the printed product. Introducing 5% w/w SCSP with a diameter of approximately 132 nm into the resin improved strain at break measured by tensile and flexural tests by 745.5 and 248.6%, respectively, and increased the fracture toughness by 166.3%. Owing to the advantages of toughness, thermal stabilities, transparency, and high accuracy of epoxy-based photocurable resin with SCSP, the 3D printing nanocomposite developed here is capable of preparing a poly(methyl methacrylate) (PMMA)-like workpiece with a commercial SL 3D printer. These results may expand the scope of the application of 3D printing in a wide variety of industries.

Association between iodine intake and thyroid autoantibodies: a cross-sectional study of 7073 early pregnant women in an iodine-adequate region

PURPOSE

The association between iodine intake and thyroid autoimmunity has been debated, especially in pregnant women. This study aimed to investigate thyroid autoantibodies and their association with iodine intake and hypothyroidism in early pregnancy.

METHODS

7073 early pregnant women from an iodine-sufficient region participated in this study. Urinary iodine concentrations (UICs) were measured using an ammonium persulfate method. Serum thyroid peroxidase antibody (TPOAb), thyroglobulin antibody (TgAb), thyroid-stimulating hormone (TSH), free thyroxine (FT4), and Tg were determined using an electrochemiluminescence immunoassay.

RESULTS

Iodine deficiency (UIC < 100 μg/L) was associated with higher risks of TPOAb positivity [adjusted odds ratio (aOR) = 1.64, 95% confidence interval [CI] (1.29-2.08)] and TgAb positivity [aOR = 1.44, 95% CI (1.16-1.80)]. Women with isolated TPOAb positivity, isolated TgAb positivity, or both TPOAb and TgAb positivity had a 14.64-fold, 7.83-fold, and 44.69-fold increased risk of overt hypothyroidism, and a 4.36-fold, 2.86-fold, and 6.26-fold increased risk of subclinical hypothyroidism, respectively. Moreover, the risks of overt and subclinical hypothyroidism in women with a high TPOAb titer were 16.99 and 4.80 times that in TPOAb-negative women, respectively. The risk of overt hypothyroidism in women with a high TgAb titer was 6.97 times that in TgAb-negative women.

CONCLUSIONS

Our work demonstrates that iodine deficiency during early pregnancy is an independent risk factor for both TPOAb positivity and TgAb positivity. Furthermore, positivity for both autoantibodies and a high thyroid autoantibody titer are associated with significantly higher risks of overt and subclinical hypothyroidism.

The effects of tourniquet use on blood loss in primary total knee arthroplasty for patients with osteoarthritis: a meta-analysis

Background

The tourniquet is a common medical instrument used in total knee arthroplasty (TKA). However, there has always been a debate about the use of a tourniquet and there is no published meta-analysis to study the effects of a tourniquet on blood loss in primary TKA for patients with osteoarthritis.

Methods

We performed a literature review on high-quality clinical studies to determine the effects of using a tourniquet or not on blood loss in cemented TKA. PubMed, Web of Science, MEDLINE, Embase, and the Cochrane Library were searched up to November 2018 for relevant randomized controlled trials (RCTs). We conducted a meta-analysis following the guidelines of the Cochrane Reviewer’s Handbook. We used the Cochrane Collaboration’s tool for assessing the risk of bias of each trial. The statistical analysis was performed with Review Manager statistical software (version 5.3).

Results

Eleven RCTs involving 541 patients (541 knees) were included in this meta-analysis. There were 271 patients (271 knees) in the tourniquet group and 270 patients (270 knees) in the no tourniquet group. The results showed that using a tourniquet significantly decreased intraoperative blood loss (P < 0.002), calculated blood loss (P < 0.002), and the time of operation (P < 0.002), but tourniquet use did not significantly decrease postoperative blood loss (P > 0.05), total blood loss (P > 0.05), the rate of transfusion (P > 0.05), and of deep vein thrombosis (DVT) (P > 0.05) in TKA.

Conclusions

Using a tourniquet can significantly decrease intraoperative blood loss, calculated blood loss, and operation time but does not significantly decrease the rate of transfusion or the rate of DVT in TKA. More research is needed to determine if there are fewer complications in TKA without the use of tourniquets.

Dynamic Imine Bond-Based Shape Memory Polymers with Permanent Shape Reconfigurability for 4D Printing

Shape memory polymer (SMP)-based 4D printing combines the advantages of SMP and 3D printing to form active materials with delicate structure. Nowadays, studies of SMP-based 4D printing materials mainly focus on cross-linked (meth)acrylate of which the permanent shape cannot be changed for their covalent linkage, limiting the usage of 4D printing materials. In this paper, a novel (meth)acrylate monomer with an aldehyde group (2-(methacryloyloxy)ethyl 4-formylbenzoate, MEFB) and hyperbranched cross-linker (HPASi) are synthesized to build (meth)acrylate systems (IEMSis) with dynamic imine bonds for 4D printing. The flexible chain structure of HPASi significantly enhances the toughness of IEMSis, which is 33-97-fold higher than that of the one without HPASi (IEM). The addition of HPASi also endows IEMSis good shape memory properties, and the shape fixity and shape recovery ratios of them are 97.5-97.6 and 91.4-93.7%, respectively. At the same time, IEMSis can undergo a stress relaxation process by dynamic exchanges of imine bonds under relatively mild conditions without a catalyst to acquire an ability of permanent shape reconfiguration. The shape retention ratio of IEMSi3 is 84.3%. In addition, the 4D-printed structures displayed here indicate that these 4D printing systems have a myriad of potential applications including aerospace structures, soft robotic grippers, smart electron switches, and intelligent packaging, while the reconfigurability shown by IEMSi3 will expand the scope of application fields of 4D printing materials.

Tumor suppressor RKIP inhibits prostate cancer cell metastasis and sensitizes prostate cancer cells to docetaxel treatment

Raf kinase inhibitory protein (RKIP) is a well-established metastasis suppressor that is frequently down-regulated in aggressive cancers. However, the impact of RKIP on cancer cell invasion and metastasis in prostate cancer is still elusive. To this end, we overexpressed RKIP in two prostate cancer cell lines. We found that overexpression of RKIP inhibited prostate cancer cells proliferation, migration and invasion. Mechanistically, we found that RKIP overexpression led to down-regula- tion of the NF-kB signaling pathway and inhibition of the epithelial-to-mesenchymal transition, which is important step for cancer metastasis. In addition, overexpression of RKIP can promote drug effects of docetaxel on prostate cancer cell lines. In conclusion, overexpression of RKIP significantly inhibits prostate cancer cell migration and metastasis, and overexpression of RKIP could aid prostate cancer treatment and therapy.