Refinement and revalidation of the Equine Ophthalmic Pain Scale: R-EOPS a new scale for ocular pain assessment in horses

This study addresses the refinement and revalidation of a composite pain scale that focuses on equine facial expressions and behavioural indicators as exhibitions of ophthalmic pain. This scale included only Behavioural and Facial and Ocular expression indicators and, compared to the first version of Equine Ophthalmic Pain Scale (EOPS), item descriptors and related ratings were changed. Thirteen horses with ocular diseases that required medical or surgical treatment were enroled (group P). In each animal, the refined EOPS (R-EOPS) was applied prior to any treatment (T0) and one week later (T7). The R-EOPS was applied twice, 7 days apart, to 16 healthy control horses (group C). Two 30-second videos were recorded each time to allow the retrospective analysis by eight observers. Inter-observer reliability of items was moderate or substantial (Krippendorff's alpha, Kα>0.40) while their intra-observer reliability was substantial or almost perfect for most items (Kα ≥0.61). Both inter- and intra-observer reliability of Total Score (TS) were however excellent (Intraclass Correlation Coefficients, ICC>0.75). The TS also showed good reproducibility (Kendall coefficient=0.786, ICC=0.684) and high consistency of its items (Cronbach's α=0.847). The comparison between groups as well as the sensitivity and specificity values supported the validity of the R-EOPS. In particular, for each extra point added to the TS, the risk of the horse having pain increased by more than two times (Odds Ratio=2.079, 95%CI=1.542-2.804; P<0.001). The Receiver Operating Characteristic analysis identified 6 as the threshold value of R-EOPS for discriminating horses with ocular pathology (sensitivity=83%, specificity=100%). This scale may be an effective tool for reliably assessing the pain level in horses with ophthalmic diseases and potentially guiding pain management although it still requires large-scale application and external validation.

Mean Free Path of Electrons in Organic Photoresists for Extreme Ultraviolet Lithography in the Kinetic Energy Range 20-450 eV

The blur caused by the nonzero mean free path of electrons in photoresists exposed by extreme ultraviolet lithography has detrimental consequences on patterning resolution, but its effect is difficult to quantify experimentally. So far, most mean free path calculations use the dielectric formalism, which is an approximation valid in the optical limit and fails at low kinetic energy. In this work, we used a modified substrate-overlayer technique that exploited the attenuation of the Si 2p core level originating specifically from the native silicon dioxide to evaluate the attenuation of electrons traveling through 2 and 4 nm of photoresist overlayers to provide a close estimation of the inelastic mean free path relevant for photoresist lithography patterning and for electron microscopy. The photoemission spectra were collected in the proximity of the Si 2p edge (binding energy ∼101 eV) using synchrotron light of energy ℏω ranging between 120 and 550 eV. The photoresist films were prototypical chemically amplified resists based on organic copolymer of poly hydroxystyrene and tertbutyl methacrylate with and without triphenyl sulfonium perfluoro-1-butanesufonate photoacid generator and trioctylamine quencher. The inelastic mean free path of electrons, in the range that is relevant for photoresist exposure in extreme ultraviolet lithography (20-92 eV), was found to be between 1 and 2 nm. At higher kinetic energy, the mean free path increased, consistently with the well-known behavior. The presence of the photoacid generator and quencher did not change the mean free path, within experimental error. Our results are discussed and compared with the existing literature on organic molecules measured via dielectric formalism and electron transmission experiments.

Multilayer beamsplitter polarizers for key UV-FUV spectral lines of solar polarimetry

Multilayer beamsplitter polarizers have been developed for improved solar polarimetry at key spectral lines. The advantage of beamsplitter polarizers is that a single device separates s from p polarization; this helps minimize attenuation and enables a more compact and lighter polarimeter, which is important for space instruments. Polarizers based on Al/AlF₃ multilayers were prepared for both C IV (155 nm) and Mg II (280 nm) lines, and based on Al/MgF₂ multilayers for H Lyman α line (121.6 nm). Polarizers were designed to mainly reflect (transmit) s (p) polarization. Beamsplitter performance and throughput are shown to compare advantageously with polarizers in the literature. Beamsplitter polarizers kept a valuable performance after several years of ageing.

Fluorine-Rich Zinc Oxoclusters as Extreme Ultraviolet Photoresists: Chemical Reactions and Lithography Performance

The absorption of extreme ultraviolet (EUV) radiation by a photoresist strongly depends on its atomic composition. Consequently, elements with a high EUV absorption cross section can assist in meeting the demand for higher photon absorbance by the photoresist to improve the sensitivity and reduce the photon shot noise induced roughness. In this work, we enhanced the EUV absorption of the methacrylic acid ligands of Zn oxoclusters by introducing fluorine atoms. We evaluated the lithography performance of this fluorine-rich material as a negative tone EUV photoresist along with extensive spectroscopic and microscopic studies, providing deep insights into the underlying mechanism. UV-vis spectroscopy studies demonstrate that the presence of fluorine in the oxocluster enhances its stability in the thin films to the ambient atmosphere. However, the EUV photoresist sensitivity (D ₅₀) of the fluorine-rich oxocluster is decreased compared to its previously studied methacrylic acid analogue. Scanning transmission X-ray microscopy and in situ X-ray photoelectron spectroscopy in combination with FTIR and UV-vis spectroscopy were used to gain insights into the chemical changes in the material responsible for the solubility switch. The results support decarboxylation of the ligands and subsequent radical-induced polymerization reactions in the thin film upon EUV irradiation. The rupture of carbon-fluorine bonds via dissociative electron attachment offers a parallel way of generating radicals. The mechanistic insights obtained here will be applicable to other hybrid materials and potentially pave the way for the development of EUV materials with better performance.

Development and preliminary validation of a pain scale for ophthalmic pain in horses: The Equine Ophthalmic Pain Scale (EOPS)

The purpose of this study was to describe the development and preliminary validation of a composite pain scale, called the Equine Ophthalmic Pain Scale (EOPS), to assess ocular pain in horses. Indicators associated with ocular pain were selected and classified as behavioural, physiological or ocular expressions. Eight horses diagnosed with ocular or adnexa diseases that required medical or surgical treatment were enrolled in the study (group P). The developed EOPS was applied at the baseline (T0) and 1 week later (T7). Moreover, the EOPS was applied twice, 1 week apart, to 15 healthy control horses (group C). Videos of 60-80 s duration of all assessments were retrospectively analysed by seven masked observers, who scored items included in the behavioural and ocular expression categories of the EOPS. The inter- and intra-observer reliability was excellent (intraclass correlation coefficients ≥0.75) for most of the scored items. Cronbach's alpha (0.76) indicated that the EOPS had good internal consistency. The total score (TS), calculated as the sum of all scores, differed between groups C and P at T0 (P < 0.001) and reduced after medical/surgical treatment in group P (P = 0.017), indicating the responsiveness of the EOPS. Moreover, the area under the curve (AUC=0.918, 95% confidence interval=0.815-1.000; P < 0.001) indicated that the EOPS was very accurate for distinguishing healthy from pathological animals. Sensitivity and specificity of EOPS to identify horses with ocular pathology (at the optimal cut-off, i.e. TS≥7) were 81.3% and 100.0%, respectively. However, 'overall behaviour', 'position inside the box', 'ear movements' and 'head position' items as well as physiological parameters, showed sub-optimal reliability, consistency and/or item-total correlation, suggesting that there is still room to improve this composite scale.

Inadvertent injection of medetomidine in the cerebromedullaris cisterna of a dog during myelographic exam

INTRODUCTION

A mixed breed dog was anesthetized for diagnostic myelography to investigate acute onset neck pain. Instead of contrast medium, 444 μg/kg medetomidine were inadvertently injected into the cerebromedullaris cisterna owing to a human error. Severe bradycardia, undetectable peripheral pulse, respiratory arrest and loss of pupillary, palpebral and corneal reflexes were observed immediately after injection. Profound hypothermia developed and esophageal temperature, measured 20 minutes after medetomidine injection, was 33 °C. Atipamezole at 1 mg/kg im was administered, followed by a second dose of 0,5 mg/kg iv 20 minutes thereafter. In the meantime, cardiorespiratory parameters and body temperature were monitored, and supportive care that included manually assisted pulmonary ventilation, active warming, and administration of 5 μg/kg/min dopamine was initiated. The dog's clinical condition improved within one hour from the beginning of supportive care, at which time ocular reflexes and swallowing returned, spontaneous ventilation was deemed as adequate and the trachea could be extubated. The dog was discharged in good clinical conditions five days later. Human error and distraction led to a potentially life-threatening complication in the dog of this report and could have possibly been prevented with the use of checklists and with a clearer definition of roles and responsibilities of the personnel involved prior to commencing the clinical procedure. Profound cardiovascular, respiratory, and thermoregulatory depression caused by intracisternal injection of medetomidine responded to parenteral administration of its antagonist and supportive care.

Ultrafast Dynamics of Plasmon-Mediated Charge Transfer in Ag@CeO2 Studied by Free Electron Laser Time-Resolved X-ray Absorption Spectroscopy

Expanding the activity of wide bandgap semiconductors from the UV into the visible range has become a central goal for their application in green solar photocatalysis. The hybrid plasmonic/semiconductor system, based on silver nanoparticles (Ag NPs) embedded in a film of CeO2, is an example of a functional material developed with this aim. In this work, we take advantage of the chemical sensitivity of free electron laser (FEL) time-resolved soft X-ray absorption spectroscopy (TRXAS) to investigate the electron transfer process from the Ag NPs to the CeO2 film generated by the NPs plasmonic resonance photoexcitation. Ultrafast changes (<200 fs) of the Ce N4,5 absorption edge allowed us to conclude that the excited Ag NPs transfer electrons to the Ce atoms of the CeO2 film through a highly efficient electron-based mechanism. These results demonstrate the potential of FEL-based TRXAS measurements for the characterization of energy transfer in novel hybrid plasmonic/semiconductor materials.

Atomic and Electronic Structure of Solid-Density Liquid Carbon

A liquid carbon (l-C) sample is generated through constant volume heating exposing an amorphous carbon foil to an intense ultrashort laser pulse. Time-resolved x-ray absorption spectroscopy at the C K edge is used to monitor the dynamics of the melting process revealing a subpicosecond rearrangement of the electronic structure associated with a sudden change of the C bonding hybridization. The obtained l-C sample, resulting from a nonthermal melting mechanism, reaches a transient equilibrium condition with a temperature of about 14 200 K and pressure in the order of 0.5 Mbar in about 0.3 ps, prior to hydrodynamic expansion. A detailed analysis of the atomic and electronic structure in solid-density l-C based on time-resolved x-ray absorption spectroscopy and theoretical simulations is presented. The method can be fruitfully used for extending the experimental investigation of the C phase diagram in a vast unexplored region covering the 10^{3}-10^{4}  K temperature range with pressures up to 1 Mbar.

Mini-invasive approach for removal of iliopsoas migrating grass awns with an atraumatic wound retractor

This case series describes a novel mini coeliotomy approach using a radial, atraumatic self-retaining retractor for the retrieval of migrant plant foreign bodies from the iliopsoas muscles of six male dogs under intra-operative ultrasonographic guidance. Four dogs had a history of pulmonary disease potentially compatible with inhalation of a foreign body approximately 2-4 months before presentation. Under ultrasonographic guidance, the grass awns were identified in the iliopsoas muscle and were completely removed. In this case series, the annular ring device provided an excellent view of the surgical field for intra-abdominal manipulations. Patient follow-up at 15 days and 6 to 12 months after surgery indicated a full recovery, and no grass awn fragment residues were identified.

Kossel Effect in Periodic Multilayers

The Kossel effect is the diffraction by a periodically structured medium, of the characteristic X-ray radiation emitted by the atoms of the medium. We show that multilayers designed for X-ray optics applications are convenient periodic systems to use in order to produce the Kossel effect, modulating the intensity emitted by the sample in a narrow angular range defined by the Bragg angle. We also show that excitation can be done by using photons (X-rays), electrons or protons (or charged particles), under near normal or grazing incident geometries, which makes the method relatively easy to implement. The main constraint comes from the angular resolution necessary for the detection of the emitted radiation. This leads to small solid angles of detection and long acquisition times to collect data with sufficient statistical significance. Provided this difficulty is overcome, the comparison or fit of the experimental Kossel curves, i.e., the angular distributions of the intensity of an emitted radiation of one of the element of the periodic stack, with the simulated curves enables getting information on the depth distribution of the elements throughout the multilayer. Thus the same kind of information obtained from the more widespread method of X-ray standing wave induced fluorescence used to characterize stacks of nanometer period, can be obtained using the Kossel effect.

Umbilical infections in foals: microbiological investigation and management

This study aims to investigate the bacteria involved in equine omphalitis and their susceptibility to antimicrobial drugs, and consequently to provide guidelines concerning the most suitable treatment protocol in accordance with the clinical, ultrasound and laboratory findings. Forty foals aged between one and 30 days were evaluated in the course of this investigation. An ultrasound examination of all umbilical remnants was carried out carefully in all foals; umbilical swabs were collected for bacteriological examination, and blood samples were collected for blood culture from 19 foals with fever and abnormal blood values. Bacterial omphalitis was observed in 95 per cent of foals and bacterial septicaemia was diagnosed in 11 cases. Enterobacteria and coccoid Gram-positive bacteria were isolated more frequently than Serratia marcescens, Pantoea agglomerans and Trueperella pyogenes Omphalectomy was performed in 77.5 per cent of the foals examined; the remainder were treated only medically with antimicrobial drugs as recommended by antibiotic susceptibility testing performed for all bacteria isolated. Antibiotic therapy was successful in all foals that only received medical treatment; nevertheless, omphalectomy was performed in most cases particularly in situations of clinical decline despite antibiotic therapy and when involvement of umbilical vein, fever and joint disorders were observed.

Free electron laser-driven ultrafast rearrangement of the electronic structure in Ti

High-energy density extreme ultraviolet radiation delivered by the FERMI seeded free-electron laser has been used to create an exotic nonequilibrium state of matter in a titanium sample characterized by a highly excited electron subsystem at temperatures in excess of 10 eV and a cold solid-density ion lattice. The obtained transient state has been investigated through ultrafast absorption spectroscopy across the Ti M2,3-edge revealing a drastic rearrangement of the sample electronic structure around the Fermi level occurring on a time scale of about 100 fs.

Phase measurement of soft x-ray multilayer mirrors

We propose a new model enabling the extraction of the phase of a multilayer mirror from photocurrent measurements in the soft x rays. In this range, the effects of the mean free path of the electrons inside the stack can no longer be neglected, which prevents the phase reconstruction by conventional photocurrent measurements. The new model takes into account this phenomenon and thus extends up to the x rays the applicability range of the technique. This approach has been validated through a numerical and experimental study of chromium/scandium multilayers used near 360 eV. To our knowledge, this work constitutes the first measurement of the phase of a multilayer mirror in the soft x-ray range.

Transmittance and optical constants of Ca films in the 4-1000 eV spectral range

The low expected absorption of Ca in the extreme ultraviolet (EUV) makes it an attractive material for multilayers and filters because most materials in nature strongly absorb the EUV. Few optical constant data had been reported for Ca. In this research, Ca films of various thicknesses were deposited on grid-supported C films and their transmittance measured in situ from the visible to the soft x-rays. The measurement range contains M2,3 and L2,3 absorption edges. Transmittance measurements were used to obtain the Ca extinction coefficient k. A minimum k of 0.017 was obtained at ∼23  eV, which makes Ca a promising low-absorption material for EUV coatings. A second spectral range of interest for its low absorption is below the Ca L3 edge at ∼343  eV. Measured k data and extrapolations were used to calculate the refractive index n using Kramers-Krönig relations. This is the first self-consistent data set on Ca covering a wide spectral range including the EUV.

Pushing the high-energy limit of plasmonics

The localized surface plasmon resonance of metal nanoparticles allows confining the eletromagnetic field in nanosized volumes, creating high-field "hot spots", most useful for enhanced nonlinear optical spectroscopies. The commonly employed metals, Au and Ag, yield plasmon resonances only spanning the visible/near-infrared range. Stretching upward, the useful energy range of plasmonics requires exploiting different materials. Deep-ultraviolet plasmon resonances happen to be achievable with one of the cheapest and most abundant materials available: aluminum indeed holds the promise of a broadly tunable plasmonic response, theoretically extending far into the deep-ultraviolet. Complex nanofabrication and the unavoidable Al oxidation have so far prevented the achievement of this ultimate high-energy response. A nanofabrication technique producing purely metallic Al nanoparticles has at last allowed to overcome these limits, pushing the plasmon resonance to 6.8 eV photon energy (≈180 nm) and thus significantly broadening the spectral range of plasmonics' numerous applications.

Fibroblastic osteosarcoma in a lion (Panthera leo)

This report describes a case of spontaneous fibroblastic osteosarcoma in the humerus of a lion from a private park in Perugia, Italy. The tumor had an irregular, smooth, brown surface and a generally firm, rubbery consistence with gritty to hard areas interspersed. The mass was poorly vascularized with areas of necrosis at the periphery. The cut surface showed a multilobulated mass that had breached the humeral cortex, with periosteal production of reactive bone. The mass invaded the epiphysis, the synovial membrane, the joint capsule and ligaments. A mild hemorrhagic effusion appeared in the joint space. Clinical signs, gross and histopathologic findings are described in this rare case of a malignant bone tumor.

Fibroblastic osteosarcoma in a lion (Panthera leo)

This report describes a case of spontaneous fibroblastic osteosarcoma in the humerus of a lion from a private park in Perugia, Italy. The tumor had an irregular, smooth, brown surface and a generally firm, rubbery consistence with gritty to hard areas interspersed. The mass was poorly vascularized with areas of necrosis at the periphery. The cut surface showed a multilobulated mass that had breached the humeral cortex, with periosteal production of reactive bone. The mass invaded the epiphysis, the synovial membrane, the joint capsule and ligaments. A mild hemorrhagic effusion appeared in the joint space. Clinical signs, gross and histopathologic findings are described in this rare case of a malignant bone tumor.

Deep ultraviolet plasmon resonance in aluminum nanoparticle arrays

Small aluminum nanoparticles have the potential to exhibit localized surface plasmon resonances in the deep ultraviolet region of the electromagnetic spectrum, however technical and scientific challenges make it difficult to attain this limit. We report the fabrication of arrays of Al/Al2O3 core/shell nanoparticles with a metallic-core diameter between 12 and 25 nm that display sharp plasmonic resonances at very high energies, up to 5.8 eV (down to λ = 215 nm). The arrays were fabricated by means of a straightforward self-organization approach. The experimental spectra were compared with theoretical calculations that allow the correlation of each feature to the corresponding plasmon modes.

Atomic and electronic structure of ultrathin fluoride barrier layers at the oxide/Si interface

A SrF(2) ultrathin barrier layer on Si(001) is used to form a sharp interface and block reactivity and intermixing between the semiconductor and a Yb(2)O(3) overlayer. Yb(2)O(3)/Si(001) and Yb(2)O(3)/SrF(2)/Si(001) interfaces grown in ultra high vacuum by molecular beam epitaxy are studied by photoemission and x-ray absorption fine structure. Without the fluoride interlayer, Yb(2)O(3)/Si(001) presents an interface reacted region formed by SiO(x) and/or silicate compounds, which is about 9 Å thick and increases up to 14-15 Å after annealing at 500-700 °C. A uniform single layer of SrF(2) molecules blocks intermixing and reduces the oxidized Si region to 2.4 Å after deposition and to 3.5 Å after annealing at 500 °C. In both cases we estimate a conduction band offset and a valence band offset of ∼ 1.7 eV and 2.4 eV between the oxide and Si, respectively. X-ray absorption fine structure measurements at the Yb L(III) edge suggest that the Yb oxide films exhibit a significant degree of static disorder with and without the fluoride barrier. Sr K edge measurements indicate that the ultrathin fluoride films are reacted, with the formation of bonds between Si and Sr; the Sr-Sr and Sr-F interatomic distances in the ultrathin fluoride barrier film are relaxed to the bulk value.

Solidlike and liquidlike behavior in monolayers and multilayers of metal-bearing amphiphiles

Atomic force microscopy (AFM) of cadmium stearate (CdSt) and cobalt stearate (CoSt) Langmuir-Blodgett films show differences in their in-plane morphologies. CdSt films, with a huge number of in-plane "pinhole" defects, follow self-affine behavior, whereas CoSt films, which are almost void of such in-plane defects, show deviation from self-affinity especially at small length scales, suggesting liquidlike behavior, imparting flexibility to the system, in plane. Phase images of CoSt obtained from tapping mode AFM show gentle undulations or hemispherelike features in contrast to its smooth topography, unlike the CdSt system where both height and phase images show self-affine domains. Near edge x-ray absorption fine structure spectroscopy indicates no preferred in-plane orientation of the head group in CoSt films. The undulating features in CoSt is explained by invoking a radially symmetric orientational distribution in the tilt of adjacent hydrocarbon tails, causing a small in-plane density variation which shows up in the phase image. These orientational disorders in adjacent tails probably allow "filling up" of in-plane defects thereby giving rise to its excellent in-plane coverage and hence a "liquidlike" behavior in CoSt. Brewster angle microscopy shows that parent Langmuir monolayers of stearic acid in the presence of Cd and Co ions in the aqueous subphase behave as two-dimensional "solids" and "liquids," respectively, suggesting the phenomena to be inherent in the amphiphiles and probably independent of their organization as monolayers and multilayers.

Transmittance and optical constants of erbium films in the 3.25-1580 eV spectral range

The optical constants of erbium (Er) films were obtained in the 3.25-1580 eV range from transmittance measurements performed at room temperature. Thin films of Er were deposited by evaporation in ultra high vacuum conditions and their transmittance was measured in situ. Substrates consisted of a thin C film supported on a grid. Transmittance measurements were used to obtain the extinction coefficient k of the Er films. The refractive index n of Er was calculated using the Kramers-Krönig analysis. k data were extrapolated both on the high- and low-energy parts of the spectrum by using experimental data and calculated k values available in the literature. Er, similar to other lanthanides, has a low-absorption band below the O(2,3) edge onset; the smallest absorption was measured at ~22.5 eV. Therefore, Er is a promising material for filters and multilayer coatings in the energy range below the O(2,3) edge, in which materials typically have an absorption stronger than at other energies. Good consistency of the data resulted from the application of f and inertial sum rules.

UPS, XPS, and NEXAFS study of self-assembly of standing 1,4-benzenedimethanethiol SAMs on gold

We report a study of the self-assembly of 1,4-benzenedimethanethiol monolayers on gold formed in n-hexane solution held at 60 °C for 30 min and in dark conditions. The valence band characteristics, the thickness of the layer, and the orientation of the molecules were analyzed at a synchrotron using high resolution photoelectron spectroscopy and near edge X-ray adsorption spectroscopy. These measurements unambiguously attest the formation of a single layer with molecules arranged in the upright position and presenting a free -SH group at the outer interface. Near edge X-ray absorption fine structure (NEXAFS) measurements suggest that the molecular axis is oriented at 24° with respect to the surface normal. In addition, valence band features could be successfully associated to specific molecular orbital contributions thanks to the comparison with theoretically calculated density of states projected on the different molecular units.

Chemistry at air/water interface versus reaction in a flask: tuning molecular conformation in thin films

Atomic force microscopy and X-ray reflectivity studies of cobalt stearate Langmuir-Blodgett (LB) films (CoStp) deposited from a preformed bulk sample on quartz substrates showed formation of a Volmer-Weber type monolayer but no multilayers as compared to the excellent multilayers of cobalt stearate films (CoStn) deposited at the air/water interface by the usual LB technique, in spite of both showing bidentate bridging type coordination of cobalt ions with the carboxylate group. The difference is attributed to existence of different headgroup conformers, observed from Fourier transform infrared (FTIR) studies. The CoStp films had a higher energy 'boat' conformation with linear O-Co-O linkage, whereas CoStn formed a low energy conformer with a bent O-Co-O configuration (bond angle of 105 degrees). Present results support the necessity of bidentate bridging coordination in multilayer deposition, but rejects its sufficiency by bringing out the crucial role played by air/water interface. Differences in surface pressure-molecular area isotherms and hydrocarbon tail-tail interactions (evident from FTIR spectra) of the films support the above statement. Methyl-methyl interactions observed in CoStn samples suggest hierarchy of supramolecular chemistry at the air/water interface in tuning the C-O-Co bond angle essential to satisfy the wetting condition with the substrate and subsequently form LB multilayers.

Optical constants of Yb films in the 23-1700 eV range

The optical constants of Yb films have been determined in the 23-1700 eV spectral range from transmittance measurements performed in situ on Yb films deposited by evaporation in ultrahigh vacuum conditions. Yb films were deposited over grids coated with a thin carbon film. Transmittance measurements were used to obtain the extinction coefficient of Yb films at each individual photon energy investigated. The energy range investigated encompasses Yb edges from M(4,5) to O(2,3). The current results, along with data in the literature, show that Yb has an interesting low-absorption band in the approximately 12-24 eV range, which may be useful for the development of transmittance filters and multilayer coatings. The current data along with literature data and extrapolations were used to obtain n, the real part of the complex refractive index, using a Kramers-Krönig analysis. The application of the sum rules showed a good consistency of the results.

Determination of optical constants of scandium films in the 20-1000 eV range

The transmittance of thin films of Sc deposited by evaporation in ultrahigh vacuum conditions has been investigated in the 20-1000 eV spectral range. Transmittance measurements were performed in situ on Sc layers that were deposited over grids coated with a C support film. Transmittance measurements were used to obtain the extinction coefficient of Sc films at each individual photon energy investigated. These data, along with the data available in the literature for the rest of the spectrum, were used to obtain the refractive index of Sc by means of the Kramers-Krönig analysis. Sum-rule tests indicated an acceptable consistency of the data.

Reflectance measurements and optical constants in the extreme ultraviolet-vacuum ultraviolet regions for SiC with a different C/Si ratio

Reflectance versus incidence angle measurements have been performed from 5 to 152 nm on samples of SiC with a different C/Si ratio deposited with rf magnetron sputtering. The optical constants of the material at different wavelengths have been determined by using a curve-fitting technique of reflectance values versus incidence angle. Complementary measurements of the incident beam polarization, film thickness, surface roughness, and stoichiometry were performed to complete the analysis of the samples.

Gratings in a conical diffraction mounting for an extreme-ultraviolet time-delay-compensated monochromator

The conical diffraction mounting in which the direction of incident light belongs to a plane parallel to the direction of the grooves has the unique property of maintaining high diffraction efficiency, even in the extreme-ultraviolet (EUV) region. This property is useful for designing high-throughput time-delay-compensated monochromators for the spectral selection of ultrashort EUV pulses as the high-order harmonics generated by the interaction between an ultrashort laser pulse and a gas jet. The time compensation allows one to exploit the femtosecond scale duration of the harmonics both to have high intensity and to reach an unprecedented temporal resolution for pump and probe experiments. Because two gratings have to be used for time compensation, the high diffraction efficiency becomes an essential requirement, which can be fulfilled by the conical diffraction mounting. Measurements recently accomplished at the Bending Magnet for Emission Absorption and Reflectivity (BEAR) beam line (ELETTRA Synchrotron, Trieste, Italy) for three gratings in the 10-90 nm region are reported here that show a peak efficiency of as much as 0.7 in the first order. A model computing the electromagnetic propagation and the grating efficiency, implemented and tested with the experimental data, permits the study and design of rather complex systems operating in the conical mounting. Basic physical principles and mathematical aspects of the model are discussed here.

Polarization and higher-order content measurement of a soft-x-ray monochromatized beam with Mo-Si multilayers

A Mo-Si multilayer mirror has been used for determination of the ellipticity and higher-order content of a synchrotron beam. The method is based on the angular measure of multilayer reflectivity in the region of Bragg first- and second-order reflections. Beam parameters were derived by a fitting procedure.

3-Methylthiophene Self-Assembled Monolayers on Planar and Nanoparticle Au Surfaces

In this article the adsorption of 3-methylthiophene on planar and nanoparticle Au surfaces is investigated. The resulting systems are compared with a benchmark system based on 1-decanethiol. The characterization data collected evidence the formation of a packed 3-methylthiophene SAM on the planar surface. In particular, spectroscopic investigations suggest that 3-methylthiophene aromatic system is not adsorbed on the surface through the pi-electron system but rather through the S atom alone. On the other hand, the behavior of 3-methylthiophene on nanoparticle surfaces is notably different from that of the alkanethiol. Only a limited fraction of the surface of Au nanoparticles results to be actually coated after purification; this notwithstanding, the nanoparticle growth seems to be strongly influenced by the presence of such a labile encapsulating agent.