All polarization-maintaining Er fiber-based optical frequency combs with nonlinear amplifying loop mirror

A fully stabilized all polarization-maintaining Er frequency comb with a nonlinear amplifying loop mirror with below 0.2 rad carrier-envelope-offset frequency phase noise is demonstrated. The integrated timing jitter is measured as 40 attosecond from 10 kHz to 10 MHz, which is the lowest value of any Er fiber frequency comb to date.

Monolithic device for modelocking and stabilization of frequency combs

We demonstrate a device that integrates a III-V semiconductor saturable absorber mirror with a graphene electro-optic modulator, which provides a monolithic solution to modelocking and noise suppression in a frequency comb. The device offers a pure loss modulation bandwidth exceeding 5 MHz and only requires a low voltage driver. This hybrid device provides not only compactness and simplicity in laser cavity design, but also small insertion loss, compared to the previous metallic-mirror-based modulators. We believe this work paves the way to portable and fieldable phase-coherent frequency combs.

Ultra-low noise all polarization-maintaining Er fiber-based optical frequency combs facilitated with a graphene modulator

High bandwidth carrier phase and repetition rate control are critical for the construction of low phase noise optical frequency combs. Here we demonstrate the use of a graphene modulator for the former and a bulk electro-optic modulator for the latter enabling record low phase noise operation of an Er fiber frequency comb. For applications that do not require carrier phase control, we show that the form factor of a fiber comb can be reduced by adapting a graphene modulator for rapid repetition rate control. Moreover, the whole system demonstration is performed with all-polarization maintaining Er fiber frequency combs, highly suitable for applications in the field.

Timing jitter characterization of mode-locked lasers with <1 zs/√Hz resolution using a simple optical heterodyne technique

Timing jitter characterization of free-running mode-locked lasers with an unprecedented resolution is demonstrated using an optical heterodyne technique. A highly sensitive timing jitter phase-discrimination signal with low-parasitic-amplitude sensitivity is achieved. Analytical and numerical methods are used to analyze the properties of the discrimination signal. For an experimental demonstration, we measure the timing jitter between two loosely synchronized mode-locked Er:Yb:glass lasers with 500-MHz fundamental repetition rates. The timing jitter-detection noise floor for a single mode-locked laser reaches 2.8×10(-13)  fs(2)/Hz (∼530  ys/√Hz), and the integrated timing jitter is 16.3 as from 10 kHz to the Nyquist frequency (250 MHz). These results show that this approach can be a simpler alternative to the well-established balanced optical cross-correlation technique.

Intrinsic power oscillations generated by the backaction of continuum on solitons and its implications on the transfer functions of a mode-locked laser

Soliton mode locking is an essential technique for building compact mode-locked lasers with multigigahertz repetition rates. In this scheme, pulses behave like dissipative solitons due to the presence of gain, loss, frequency filtering, and nonlinear absorption in the cavity. The continuum waves that radiate from the perturbed soliton act back on the soliton, resulting in periodic changes in the electric field of the pulse. We find that, in the presence of gain filtering or two-photon absorption, this field modulation is converted to power modulation, which is observable from the radio-frequency spectrum of the laser's output power. We investigate its physical origin in the context of soliton perturbation theory. For comparison, we also perform numerical simulations and experiments.

Frequency comb stabilization with bandwidth beyond the limit of gain lifetime by an intracavity graphene electro-optic modulator

Intracavity loss modulation enables offset-frequency control with bandwidths beyond what is possible by pump power modulation. To demonstrate this new method, we use a subwavelength thick graphene electro-optic modulator to stabilize the offset frequency in a Tm:fiber frequency comb at 1.95 μm wavelength. Record-low residual phase noise of 144 mrads was achieved with this new locking scheme.

Broadband graphene electro-optic modulators with sub-wavelength thickness

Graphene's featureless optical absorption, ultrahigh carrier mobility, and variable optical absorption by an applied gate voltage enable a new breed of optical modulators with broad optical and electrical bandwidths. Here we report on an electro-optic modulator that integrates single-layer graphene in a sub-wavelength thick, reflective modulator structure. These modulators provide a large degree of design freedom, which allows tailoring of their optical properties to specific needs. Current devices feature an active aperture ~100 µm, and provide uniform modulation with flat frequency response from 1 Hz to >100 MHz. These novel, low insertion-loss graphene-based modulators offer solutions to a variety of high-speed amplitude modulation tasks that require optical amplitude modulation without phase distortions, a flat frequency response, or ultra-thin geometries, such as for controlling monolithic, high-repetition rate mode-locked lasers or active interferometers.

Testing ultrafast mode-locking at microhertz relative optical linewidth

We report new limits on the phase coherence of the ultrafast mode-locking process in an octave-spanning Ti:sapphire comb.We find that the mode-locking mechanism correlates optical phase across a full optical octave with less than 2.5 microHZ relative linewidth. This result is at least two orders of magnitude below recent predictions for quantum-limited individual comb-mode linewidths, verifying that the mode-locking mechanism strongly correlates quantum noise across the comb spectrum.

Efficient output coupling of intracavity high-harmonic generation

We demonstrate a novel technique for coupling extreme-ultraviolet (XUV) harmonic radiation out of a femtosecond enhancement cavity. We use a small-period diffraction grating etched directly into the surface of a dielectric mirror. For the fundamental light, this element acts as a high reflector. For harmonic wavelengths, it acts as a diffraction grating, coupling XUV radiation out of the cavity. Using this method, we observed the third through twenty-first odd harmonics with a dramatic increase in usable power over previous results of high-harmonic generation at high repetition rates.

Quantitative measurement of timing and phase dynamics in a mode-locked laser

We present results of an experimental study of the timing and phase dynamics in a mode-locked Ti:sapphire laser. By measuring the response of two widely spaced comb lines to a sinusoidal modulation of the pump power, we determine quantitatively the response of both the central pulse time and the phase. Because of the distinct response of the pulse energy, central frequency, and gain to the modulation, we are able to distinguish their contributions to the timing and phase dynamics.

Cavity-enhanced similariton Yb-fiber laser frequency comb: 3 x 10(14) W/cm2 peak intensity at 136 MHz

We report on a passive cavity-enhanced Yb-fiber laser frequency comb generating 230 MW of peak power (3 kW of average power) at a 136 MHz pulse repetition rate. The intracativy peak intensity of 3 x 10(14) W/cm2 for the 95 fs pulse is sufficient to ionize noble gases, such as Xe, Kr, or Ar. The laser system is based on a mode-locked Yb-fiber similariton oscillator in conjunction with a cladding-pumped chirped-pulse fiber amplifier. After recompression, 75 fs duration pulses at a 13.1 W average power are obtained. These pulses are then coherently added inside a passive ring cavity by controlling the fiber oscillator's pulse repetition rate and carrier-envelope offset frequency. This system is well suited for studying high-field phenomena at very high pulse repetition rates.

Displacement metrology with sub-pm resolution in air based on a fs-comb wavelength synthesizer

We report on a displacement metrology setup that provides sub-pm resolution in air. The setup is based on a Fabry-Perot cavity. However, unlike current Fabry-Perot cavity based displacement setups we incorporate a novel fs-laser based arbitrary wavelength synthesizer that provides efficient suppression of atmospheric disturbances while providing very wide and precise tuning of the output wavelength. The wavelength synthesizer provides sub-10 attometer wavelength resolution. The setup provides subpm length stability for integration times of up to one minute and sub-10 pm for up to half an hour without airtight enclosure of the Fabry-Perot cavities.

Phase-locked widely tunable optical single-frequency generator based on a femtosecond comb

We present an arbitrary optical single-frequency generator based on a femtosecond optical frequency comb. The functions of this device are comparable to those of a radio-frequency synthesizer. However, this device operates at hundreds of terahertz. The absolute frequency accuracy of this synthesizer is approximately 1 kHz at a 282 THz carrier frequency. The stability is approximately 2 x 10(-14) at 100 s, and the tuning speed exceeds 30 GHz/s. This source demonstrates the integration of a phase-locked optical comb into a versatile and easy-to-use system for the generation of tunable, absolute optical frequencies. By using downconversion, one could generate tunable terahertz frequencies that are phase locked to a microwave reference, such as a Cs atomic clock, and high-precision interferometry could benefit greatly from the stability and accuracy of this widely tunable source.

Frequency metrology with a turnkey all-fiber system

The repetition rate and carrier-envelope phase offset frequencies of a turnkey, all-fiber-based continuum generator were phase locked to a hydrogen maser. The frequency of the hydrogen maser was calibrated with a highly stable cesium atomic clock, and therefore a fully phase-locked optical frequency comb with well-defined absolute frequencies was obtained. In contrast with the commonly used Ti:sapphire-laser-based systems, we have accomplished a fully turnkey system with no user-adjustable parts. To evaluate the performance of this novel system, we performed absolute frequency measurements in the telecommunications region and at 1064 nm and compared them with our traditional Ti:sapphire-based comb.

Direct frequency comb generation from an octave-spanning, prismless Ti:sapphire laser

We describe a self-referenced optical frequency comb generator based on an octave-spanning, prismless Ti:sapphire laser. Dispersion compensation is provided by novel double-chirped mirror pairs and BaF2 wedges. Current versions operate at 80 and 150 MHz. The compact prismless design allows system scaling to a gigahertz repetition rate. Its carrier-envelope beat note is intrinsically stable with a signal-to-noise ratio of 30 dB in a 100-kHz bandwidth. The octave is reached at 25 dB below the average power level. The in-loop accumulated phase error is 1.4 rad (20 mHz to 1 MHz). The technique has the advantages of simplicity and stability compared with previous designs.

Attosecond active synchronization of passively mode-locked lasers by balanced cross correlation

A balanced cross correlator, the optical equivalent of a balanced microwave phase detector, is demonstrated. Its use in synchronizing an octave-spanning Ti:sapphire laser and a 30-fs Cr:forsterite laser yields 300-attosecond timing jitter measured from 10 mHz to 2.3 MHz. The spectral overlap between the two lasers is strong enough to permit direct detection of the difference in carrier-envelope offset frequency between the two lasers.

All-optical active mode locking with a nonlinear semiconductor modulator

All-optical active mode locking of a picosecond Nd:YVO(4) laser is demonstrated by use of an intracavity semiconductor nonlinear Fabry-Perot mirror. The reflectivity of the Fabry-Perot mirror is modulated by optical carrier injection. Depending on the carrier recombination time, the width of the Nd:YVO(4) laser pulses varies from 6 to 20 ps, as is typical for passively mode-locked Nd:YVO(4) lasers.

Ultralow-threshold Kerr-lens mode-locked Ti:Al(2)O(3) laser

An ultralow-threshold Kerr-lens mode-locked Ti:Al(2)O(3) laser achieved by use of an extended cavity design is demonstrated. Mode-locking thresholds as low as 156 mW are achieved. Pulses with durations as short as 14 fs and bandwidths of >100 nm with output powers of ~15 mW at 50-MHz repetition rates are generated by only 200 mW of pump power. Reducing the pump power requirements to a factor of 10x less than required by most conventional Kerr-lens mode-locked lasers permits inexpensive, low-power pump lasers to be used. This will facilitate the development of low-cost, high-performance femtosecond Ti:Al(2)O(3) laser technology.

Generation of sub-10-fs pulses from a Kerr-lens mode-locked Cr(3+):LiCAF laser oscillator by use of third-order dispersion-compensating double-chirped mirrors

Pulses as short as 9 fs at 220-mW average power and a 97-MHz repetition rate are generated from a cw Ti:sapphire-pumped Kerr-lens mode-locked Cr(3+)LiCAF laser oscillator employing broadband double-chirped mirrors for second- and third-order dispersion compensation. Fine adjustment of dispersion is accomplished with a fused-silica prism pair. The result demonstrates that Raman-induced self-frequency shifting of the pulse does not limit sub-10-fs pulse generation from colquiriite crystals.

Passive synchronization of two independent laser oscillators with a Fabry-Perot modulator

By optical modulation of the reflectivity of an intracavity nonlinear Fabry-Perot semiconductor mirror, the pulse train from a passively mode-locked picosecond Nd:YVO(4) laser oscillator is synchronized to an independent femtosecond-mode-locked Ti:sapphire laser. We obtain stable synchronized pulse trains at central wavelengths of 1064 and 850 nm, and the Ti:sapphire laser is still independently tunable over a large wavelength range. The tolerable cavity-length difference between the two laser oscillators exceeds 20mu;m .

Continuous-wave operation and Q-switched mode locking of Cr(4+):YAG microchip lasers

Cw-operation, gain-switched, and passively Q -switched mode locking of Cr(4+): YAG microchip lasers with output powers of several hundred milliwatts is demonstrated experimentally in the eye-safe region near 1.5microm . Requirements for cw mode locking of such lasers are investigated by numerical simulations.

Nonlinear optics with phase-controlled pulses in the sub-two-cycle regime

Nonlinear optical effects due to the phase between carrier and envelope are observed with 5 fs pulses from a Kerr-lens mode-locked Ti:sapphire laser. These sub-two-cycle pulses with octave spanning spectra are the shortest pulses ever generated directly from a laser oscillator. Detection of the carrier-envelope phase slip is made possible by simply focusing the short pulses directly from the oscillator into a BBO crystal. As a further example of nonlinear optics with such short pulses, the interference between second- and third-harmonic components is also demonstrated.

Control of Q-switched mode locking by active feedback

It is demonstrated that Q-switching dynamics in mode-locked lasers can be controlled by use of an active feedback loop. Analytic design rules for the feedback loop are presented. Suppression of Q-switched mode locking in a diode-pumped, passively mode-locked Nd:YVO(4) laser is shown experimentally and numerically.