[Clinical application of a prefabricated interocclusal recording cap for making interocclusal records of implant-supported fixed prostheses]

Objective: To use a self-developed, prefabricated cap for making interocclusal records in implant-supported fixed prosthetic treatment, and to evaluate its effect of clinical application and accuracy of transferring intra-oral intercuspal position. Methods: Series of prefabricated caps for occlusal recording of implant-supported fixed prostheses were designed based on the healing abutments, and fabricated with three-dimensional (3D) printing. According to the inclusion and exclusion criteria, 12 partially edentulous patients who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology between November 2020 and September 2021, had lost no fewer than 2 contiguous teeth in distal extension (Kennedy Class Ⅰ or Ⅱ), and had received implant placement 3 months ago were enrolled. Self-control study design was used. Two occlusal records of each included case were obtained by the following 2 methods: for the test group, appropriate prefabricated caps were used; and for the control group, polyvinyl siloxane occlusal record was directly set on the healing abutments. The working casts were mounted on the mechanical articulator using the 2 groups of occlusal records successively. Accuracy of occlusal relationship of the mounted casts was evaluated. Diagnostics test was performed to obtain the sensitivity and positive predictive value, which were determined in photographs by comparing the intra-oral occlusal contact points with those in the mounted casts, point-by-point. Virtual casts were taken by intraoral and extraoral scans in intercuspal position and imported to Geomagic Studio 2014. Then the root mean square values of occlusal clearance space between the upper and lower occlusal surfaces of remaining posterior teeth, and the deviations of the interocclusal position of the occlusal surfaces of the remaining teeth in the mandibular arches when superimposing the maxillary arches of the intraoral and extraoral scans were calculated. As a self-control design, paired t test was used. Results: Twelve participants were enrolled, including 3 men and 9 women aged (52.6±12.1) years, and 36 missing teeth. The prefabricated caps could fit on the healing abutments with good retention and stability. The sensitivity of the test group (0.73±0.14) was significantly better than that of control group (0.63±0.12,P<0.01), with no significant difference in positive predictive value between the 2 groups (P>0.05). The deviations of the interocclusal position of the occlusal surfaces of the remaining teeth were (357.0±140.2) μm for the test group, and (399.4±206.3) μm for the control group, with no significant difference between them (P>0.05). Conclusions: Interocclusal position record based on prefabricated cap in this study for implant-supported fixed prosthetic treatment can improve the consistency between the intra-oral occlusion and the occlusion in dental casts. This technique has good accuracy, clinical convenience and usability.

[Morphology accuracy evaluation of direct composite occlusal veneer using two types of modified stamp-technique]

OBJECTIVE

To evaluate the morphology accuracy of direct occlusal veneer using two types of modified stamp-technique, comparing the Results of two types of stamp and different composite resin.

METHODS

Model scanner was used to get the original data from the standard resin teeth in plastic model. Two types of stamps were made: solid silicon stamp and transparent silicon stamp. In the study, 54 resin tooth were randomly divided into 9 groups: Groups 1-8 were restored by direct composite resin, using general and bulk-filled composite resin in occlusal veneer (1 mm or 2 mm) with two types of stamp-technique (the solid silicon, and the transparent silicon), and the control group was restored by indirect way using CAD/CAM composite resin restoration by biocopy technique to mimic the original shape of the teeth. After the resin teeth were prepared for occlusal veneer, the direct and indirect composite resins were restored. After the restoration was finished, the data were obtained again by the same model scanner in the plastic model. 3D comparisons were made using the original and restoration data, the average difference and the root mean square of difference (RMS) were recoded from the software. The RMS of all the groups were analyzed using one way ANOVA (α=0.05).

RESULTS

The RMS of occlusal surface in solid silicon stamp group was (0.136±0.031) mm, in transparent silicon group was (0.130±0.024) mm, and in control group was (0.130±0.009) mm. There were no significant difference. While the RMS of buccal/lingual surface in solid silicon stamp group was the smallest [(0.135±0.020) mm, P < 0.05], and in transparent silicon group it was (0.147±0.021) mm, and control group (0.153±0.014) mm. The general composite resin using the two types of stamp had the largest occlusal RMS in 2 mm occlusal veneer, which were significantly larger than control group (P < 0.05).

CONCLUSION

The direct occlusal veneer using two types of modified "stamp-technique" had relatively good morphology accuracy. Direct occlusal veneer using bulk-filled composite resin made with two types of stamp technique had even more accurate morphology than using general composite resin. The solid silicon stamp had a better morphology accuracy in buccal/lingual surface than the transparent silicon stamp.

[Morphology accuracy evaluation of direct composite occlusal veneer using two types of modified stamp-technique]

OBJECTIVE

To evaluate the morphology accuracy of direct occlusal veneer using two types of modified stamp-technique, comparing the Results of two types of stamp and different composite resin.

METHODS

Model scanner was used to get the original data from the standard resin teeth in plastic model. Two types of stamps were made: solid silicon stamp and transparent silicon stamp. In the study, 54 resin tooth were randomly divided into 9 groups: Groups 1-8 were restored by direct composite resin, using general and bulk-filled composite resin in occlusal veneer (1 mm or 2 mm) with two types of stamp-technique (the solid silicon, and the transparent silicon), and the control group was restored by indirect way using CAD/CAM composite resin restoration by biocopy technique to mimic the original shape of the teeth. After the resin teeth were prepared for occlusal veneer, the direct and indirect composite resins were restored. After the restoration was finished, the data were obtained again by the same model scanner in the plastic model. 3D comparisons were made using the original and restoration data, the average difference and the root mean square of difference (RMS) were recoded from the software. The RMS of all the groups were analyzed using one way ANOVA (α=0.05).

RESULTS

The RMS of occlusal surface in solid silicon stamp group was (0.136±0.031) mm, in transparent silicon group was (0.130±0.024) mm, and in control group was (0.130±0.009) mm. There were no significant difference. While the RMS of buccal/lingual surface in solid silicon stamp group was the smallest [(0.135±0.020) mm, P < 0.05], and in transparent silicon group it was (0.147±0.021) mm, and control group (0.153±0.014) mm. The general composite resin using the two types of stamp had the largest occlusal RMS in 2 mm occlusal veneer, which were significantly larger than control group (P < 0.05).

CONCLUSION

The direct occlusal veneer using two types of modified "stamp-technique" had relatively good morphology accuracy. Direct occlusal veneer using bulk-filled composite resin made with two types of stamp technique had even more accurate morphology than using general composite resin. The solid silicon stamp had a better morphology accuracy in buccal/lingual surface than the transparent silicon stamp.