Field-effect transistor biosensor with signal amplification by ternary initiation complexes for detection of wide-range RNA concentration

Electrical detection of RNAs using transistor-based biosensors has attracted attention as a strategy for medical diagnosis and environmental monitoring. Herein, we demonstrated a proof-of-concept for specific, sensitive, and label-free RNA detection using a field-effect transistor (FET) biosensor with signal amplification by ternary initiation complexes (SATIC), which is an isothermal one-step nucleic acid amplification initiated by the combination of target RNA, circular DNA template and DNA primer. The SATIC system-applied FET biosensor specifically and quantitatively detected the target RNA with a single-nucleotide difference via the negative charges derived from the amplification products formed by a nucleic acid amplification reaction with φ29 DNA polymerase on the gate surface. In particular, the control of the amplification time allowed the detection of target RNA molecules over a wide concentration range, resulting in a detection limit of up to 6 copies/μL. Therefore, a transistor-based bioassay using the SATIC system could be useful for simple and sensitive nucleic acid analysis.

Detection of Unbalanced Voltage Cells in Series-connected Lithium-ion Batteries Using Single-frequency Electrochemical Impedance Spectroscopy

For a battery module where single cells are connected in series, the single cells should each have a similar state of charge (SOC) to prevent them from being exposed to an overcharge or over-discharge during charge–discharge cycling. To detect the existence of unbalanced SOC cells in a battery module, we propose a simple measurement method using a single-frequency response of electrochemical impedance spectroscopy (EIS). For a commercially available graphite/nickel-cobalt-aluminum-oxide lithium-ion cell, the cell impedance increases significantly below SOC20%, while the impedance in the medium SOC region (SOC20%–SOC80%) remains low with only minor changes. This impedance behavior is mostly due to the elementary processes of cathode reactions in the cell. Among the impedance values (Z, Z′, Z″), the imaginary component of Z″ regarding cathode reactions changes heavily as a function of SOC, in particular, when the EIS measurement is performed around 0.1 Hz. Thanks to the significant difference in the time constant of cathode reactions between ≤SOC10% and ≥SOC20%, a single-frequency EIS measurement enlarges the difference in impedance between balanced and unbalanced cells in the module and facilitates an ~80% improvement in the detection signal compared to results with conventional EIS measurements.

Fabrication of photo-electrochemical biosensors for ultrasensitive screening of mono-bioactive molecules: the effect of geometrical structures and crystal surfaces

The controlled design of hierarchical CN-ST flowers is a key feature for creating biosensor surface electrodes for photo-electrochemical, ultrasensitive screening of mono-bioactive molecules.

Correction: Stimuli-responsive magnetic nanoparticles for tumor-targeted bimodal imaging and photodynamic/hyperthermia combination therapy

Correction for 'Stimuli-responsive magnetic nanoparticles for tumor-targeted bimodal imaging and photodynamic/hyperthermia combination therapy' by Kyoung Sub Kim, et al., Nanoscale, 2016, DOI: 10.1039/c6nr02273a.

Effect of Lipopolysaccharide on the Progression of Non-Alcoholic Fatty Liver Disease in High Caloric Diet-Fed Mice

The incidence of non-alcoholic steatohepatitis (NASH) is increasing. Because gut microbiota have been highlighted as one of the key factors in the pathogenesis of metabolic syndrome, we investigated the involvement of the bacterial component in the progression of non-alcoholic fatty liver (NAFL) to NASH. C57BL/6 mice were fed with maintenance food (MF, groups A and B) or a high caloric diet (HCD, groups C and D) for 1 month. Mice were then divided into four groups: Groups A and C were inoculated with PBS, while groups B and D were inoculated with lipopolysaccharide (LPS) plus complete Freund's adjuvant (CFA). The inoculations were performed a total of 3 times over 3 months. At 6 months, while hepatic steatosis was observed in groups C and D, cellular infiltration and fibrosis were less evident in group C than in group D. Inflammatory cytokines were upregulated in groups B and D. 16S rRNA pyrosequencing of whole colon homogenates containing faeces showed that certain bacterial groups, such as Bacteroidaceae, Peptostreptococcaceae and Erysipelotrichaceae, were increased in groups C and D. Although loading of bacterial components (LPS) resulted in hepatic inflammation in both MF- and HCD-fed mice, HCD feeding was more crucial in the progression of NAFL during the triggering phase.

Stimuli-responsive magnetic nanoparticles for tumor-targeted bimodal imaging and photodynamic/hyperthermia combination therapy

Despite magnetic nanoparticles having shown great potential in cancer treatment, tremendous challenges related to diagnostic sensitivity and treatment efficacy for clinical application remain. Herein, we designed optimized multifunctional magnetite nanoparticles (AHP@MNPs), composed of Fe3O4 nanoparticles and photosensitizer conjugated hyaluronic acid (AHP), to achieve enhanced tumor diagnosis and therapy. Fe3O4 nanoparticles (MNPs) were synthesized by a facile hydrolysis method. MNPs have higher biocompatibility, controllable particle sizes, and desirable magnetic properties. The fabricated AHP@MNPs have enhanced water solubility (average size: 108.13 ± 1.08 nm), heat generation properties, and singlet oxygen generation properties upon magnetic and laser irradiation. The AHP@MNPs can target tumors via CD44 receptor-mediated endocytosis, which have enhanced tumor therapeutic effects through photodynamic/hyperthermia-combined treatment without any drugs. We successfully detected tumors implanted in mice via magnetic resonance imaging and optical imaging. Furthermore, we demonstrated the photodynamic/hyperthermia-combined therapeutic efficacy of AHP@MNPs with synergistically enhanced efficacy against cancer.

Lifetime of Ionic Vacancy Created in Redox Electrode Reaction Measured by Cyclotron MHD Electrode

The lifetimes of ionic vacancies created in ferricyanide-ferrocyanide redox reaction have been first measured by means of cyclotron magnetohydrodynamic electrode, which is composed of coaxial cylinders partly exposed as electrodes and placed vertically in an electrolytic solution under a vertical magnetic field, so that induced Lorentz force makes ionic vacancies circulate together with the solution along the circumferences. At low magnetic fields, due to low velocities, ionic vacancies once created become extinct on the way of returning, whereas at high magnetic fields, in enhanced velocities, they can come back to their initial birthplaces. Detecting the difference between these two states, we can measure the lifetime of ionic vacancy. As a result, the lifetimes of ionic vacancies created in the oxidation and reduction are the same, and the intrinsic lifetime is 1.25 s, and the formation time of nanobubble from the collision of ionic vacancies is 6.5 ms.

Li-rich Li-Si alloy as a lithium-containing negative electrode material towards high energy lithium-ion batteries

Lithium-ion batteries (LIBs) are generally constructed by lithium-including positive electrode materials, such as LiCoO₂, and lithium-free negative electrode materials, such as graphite. Recently, lithium-free positive electrode materials, such as sulfur, are gathering great attention from their very high capacities, thereby significantly increasing the energy density of LIBs. Though the lithium-free materials need to be combined with lithium-containing negative electrode materials, the latter has not been well developed yet. In this work, the feasibility of Li-rich Li-Si alloy is examined as a lithium-containing negative electrode material. Li-rich Li-Si alloy is prepared by the melt-solidification of Li and Si metals with the composition of Li₂₁Si₅. By repeating delithiation/lithiation cycles, Li-Si particles turn into porous structure, whereas the original particle size remains unchanged. Since Li-Si is free from severe constriction/expansion upon delithiation/lithiation, it shows much better cyclability than Si. The feasibility of the Li-Si alloy is further examined by constructing a full-cell together with a lithium-free positive electrode. Though Li-Si alloy is too active to be mixed with binder polymers, the coating with carbon-black powder by physical mixing is found to prevent the undesirable reactions of Li-Si alloy with binder polymers, and thus enables the construction of a more practical electrochemical cell.

Label-free detection of Cu(ii) in a human serum sample by using a prion protein-immobilized FET sensor

We report a simple and label-free detection of Cu²⁺utilizing prion proteins as the recognition molecules, which can provide highly sensitive and selective performance at the nanomolar level in a human serum sample.

Zinc-air battery: understanding the structure and morphology changes of graphene-supported CoMn(2)O(4) bifunctional catalysts under practical rechargeable conditions

Nitrogen-doped/undoped thermally reduced graphene oxide (N-rGO) decorated with CoMn2O4 (CMO) nanoparticles were synthesized using a simple one-step hydrothermal method. The activity and stability of this hybrid catalyst were evaluated by preparing air electrodes with both primary and rechargeable zinc-air batteries that consume ambient air. Further, we investigated the relationship between the physical properties and the electrochemical results for hybrid electrodes at various cycles using X-ray diffraction, scanning electron microscopy, galvanodynamic charge-discharging and electrochemical impedance spectroscopy. The structural, morphological and electrocatalytic performances confirm that CMO/N-rGO is a promising material for safe, reliable, and long-lasting air cathodes for both primary and rechargeable zinc-air batteries that consume air under ambient condition.

A lithium-ion sulfur battery based on a carbon-coated lithium-sulfide cathode and an electrodeposited silicon-based anode

In this paper, we report a lithium-ion battery employing a lithium sulfide cathode and a silicon-based anode. The high capacity of the silicon anode and the high efficiency and cycling rate of the lithium sulfide cathode allowed optimal full cell balance. We show in fact that the battery operates with a very stable capacity of about 280 mAh g(-1) at an average voltage of 1.4 V. To the best of our knowledge, this battery is one of the rare examples of lithium-metal-free sulfur battery. Considering the high theoretical capacity of the employed electrodes, we believe that the battery here reported may be of potential interest as high-energy, safe, and low-cost power source for electric vehicles.

Field Effect Transistor Biosensor Using Antigen Binding Fragment for Detecting Tumor Marker in Human Serum

Detection of tumor markers is important for cancer diagnosis. Field-effect transistors (FETs) are a promising method for the label-free detection of trace amounts of biomolecules. However, detection of electrically charged proteins using antibody-immobilized FETs is limited by ionic screening by the large probe molecules adsorbed to the transistor gate surface, reducing sensor responsiveness. Here, we investigated the effect of probe molecule size on the detection of a tumor marker, α-fetoprotein (AFP) using a FET biosensor. We demonstrated that the small receptor antigen binding fragment (Fab), immobilized on a sensing surface as small as 2–3 nm, offers a higher degree of sensitivity and a wider concentration range (100 pg/mL–1 μg/mL) for the FET detection of AFP in buffer solution, compared to the whole antibody. Therefore, the use of a small Fab probe molecule instead of a whole antibody is shown to be effective for improving the sensitivity of AFP detection in FET biosensors. Furthermore, we also demonstrated that a Fab-immobilized FET subjected to a blocking treatment, to avoid non-specific interactions, could sensitively and selectively detect AFP in human serum.

A label-free electrical assay of fibrous amyloid β based on semiconductor biosensing

Simple electrical assay discriminates between fibrous and non-fibrous amyloid β (Aβ) proteins, and determines the fibrous Aβ concentration with high sensitivity.

Influence of the diffusion-layer thickness during electrodeposition on the synthesis of nano core/shell Sn–O–C composite as an anode of lithium secondary batteries

Electrodeposition of nano core/shell Sn–O–C composite anodes for lithium secondary batteries and improvement of cycle performances by a simple agitation technique.

Thermoregulatory responses elicited by microinjection of L-glutamate and its interaction with thermogenic effects of GABA and prostaglandin E2 in the preoptic area

The aim of the present study was to investigate the thermoregulatory effects of neuronal activation with sodium L-glutamate (glutamate) in the preoptic area (POA) of the hypothalamus and to examine its possible interaction with the thermogenic effects of GABA and prostaglandin E(2) (PGE(2)). Unilateral microinjection of glutamate (5 nmol) into the lateral POA or its vicinity elicited a prompt increase in tail skin temperature and simultaneous decreases in the O(2) consumption rate (VO(2)), heart rate, and colonic temperature in urethane-chloralose-anesthetized rats. A central subpopulation of these sites at around the level of bregma was also responsive to the thermogenic and tachycardic effects of GABA (30 nmol). Although the microinjection of GABA into nearby sites elicited no direct effect, it greatly attenuated the hypothermic effects of glutamate subsequently administered to the same site. These results suggest that activation of the lateral POA elicited heat-loss responses and that its central part provided a tonic inhibitory drive toward heat production and tail vasoconstriction. On the other hand, the microinjection of glutamate elicited initial small decreases and subsequent large increases in VO(2) and heart rate in the rostromedial POA. However, no thermoregulatory response was elicited by the microinjection of glutamate at sites where the microinjection of PGE(2) (35 fmol) elicited thermogenic, tachycardic and hyperthermic responses. These results may suggest that the rostromedial POA contained two glutamate-responsive cell groups that had opposite influences on thermoregulation and that the locus that was highly sensitive to the thermogenic effect of PGE(2) was unreactive to glutamate. Collectively, activation of neurons in the lateral POA and rostromedial POA evoked distinct thermoregulatory responses.