Characterization of per- and polyfluoroalkyl substances (PFAS) and other constituents in MSW landfill leachate from Puerto Rico

Elevated per- and polyfluoroalkyl substance (PFAS) concentrations have been reported in municipal solid waste (MSW) landfill leachate with higher levels in wet and warmer subtropical climates. Information about landfill leachate characteristics is much more limited in tropical climates. In this study, 20 landfill leachate samples were collected from three MSW landfills on the tropical island of Puerto Rico and results were compared against landfills nationally and within Florida, USA. The samples collected in Puerto Rico underwent physical-chemical analysis, as well as a quantitative analysis of 92 PFAS. Samples described in this study include discrete leachate types, such as leachate, gas condensate, and leachate which has undergone on-site treatment (e.g., RO treatment, phytoremediation, lagoons). A total of 51 PFAS were detected above quantitation limits, including perfluorohexylphosphonic acid, a perfluoroalkyl acid (PFAA) which has not been reported previously in landfill leachate. ∑PFAS concentrations in this study (mean: 38,000 ng L-1), as well as concentrations of individual PFAS, are significantly higher than other reported MSW landfill leachate concentrations. The profiles of leachates collected from on-site treatment systems indicate possible transformation of precursor PFAS as a result of treatment processes - oxidizing conditions, for example, may facilitate aerobic transformation, increase the concentrations of PFAAs, and possibly increase the apparent ∑PFAS concentration. Extreme climate events, including rising temperatures and more frequent hurricanes, have placed additional strain on the solid waste management infrastructure on the island - adding complexity to an already challenging PFAS management issue. As concern grows over PFAS contamination in drinking water, these findings should inform solid waste and leachate management decisions in order to minimize PFAS emissions in island environments.

Assessment of Municipal Solid-Waste Landfill Liner Performance

The leachate collection system (LCS) and leak detection system (LDS) flow rate data from 240 cells (or a combination of cells) at 54 municipal solid-waste landfills (located in seven US states) with double-liner systems were analyzed to assess the performance of the primary liner system. The average LCS leachate collection rates for the study sites ranged from 380 L ha-1 day-1 (40.7 gal. acre-1 day-1) to 22,400 L ha-1 day-1 (2,390 gal. acre-1 day-1) on a sitewide basis, and the average LDS leachate collection rates ranged from 1.8 L ha-1 day-1 (0.2 gal. acre-1 day-1) to 577 L ha-1 day-1 (61.7 gal. acre-1 day-1) on a sitewide basis. Assuming all leachate generated is collected either by the LCS or LDS, the data suggest that the primary liner systems' aggregated efficiency is over 98%. The collection efficiency at sites that used a composite liner (geomembrane underlain by a geosynthetic clay liner or a compacted clay liner) system was not statistically different from the sites that used only a geomembrane as the primary liner (geomembrane underlain by a permeable layer) (median of 99% for both types). Leakage rates were compared with those estimated from the equations used by the hydrologic evaluation of landfill performance (HELP) model. The comparison suggests that the equations used by the HELP model to estimate leakage through the liner overestimate the leakage rate through geomembrane primary liners but underestimate the leakage rate through composite primary liners based on the HELP-model-default defect size and suggested defect frequency. It is also possible that groundwater intrusion could contribute to a portion of the leachate collected from the LDS because leachate quality data collected from a few sites indicated the LCS leachate had a higher concentration of most constituents than the leachate collected from LDS.

Relationships between per- and polyfluoroalkyl substances (PFAS) and physical-chemical parameters in aqueous landfill samples

Variable chemistries of liquids from landfills can potentially impact levels of per- and polyfluoroalkyl substances (PFAS). The objective of the current study was to evaluate relationships between physical-chemical properties (bulk measurements, oxygen demand components, and metals) and PFAS concentrations in different types of aqueous landfill samples. Aqueous landfill samples were collected from 39 landfill facilities in Florida, United States. These samples included leachates from landfills that receive different waste types, such as municipal solid waste incineration ash (MSWA), construction and demolition debris (C&D), and municipal solid waste (MSW). Additional aqueous landfill samples were sourced from treated landfill leachate, gas condensate, stormwater, and groundwater from within and near the landfill boundaries. Results showed significant correlations (p < 0.05) between ∑26PFAS and alkalinity (rs = 0.83), total organic carbon (TOC) (rs = 0.84), and ammonia (rs = 0.79) for all leachate types. Other physical-chemical parameters that were significantly correlated (rs > 0.60, p < 0.05) with PFAS included specific conductivity, chemical oxygen demand (COD), and to a lesser extent, total dissolved solids (TDS) and total solids (TS). For gas condensates, PFAS was significantly correlated with TOC. Stormwater and groundwater, within and near the landfill boundaries, had considerably lower levels of PFAS and had a minimal correlation between PFAS and physical-chemical parameters. Although PFAS concentrations and physical-chemical parameters and their correlations varied between different types of aqueous landfill samples, results suggest that physical-chemical properties can be useful indicators of relative PFAS concentrations within a leachate type. More research is needed to validate the mechanisms that relate physical-chemical parameters to PFAS concentrations in landfill leachates.

Per- and polyfluoroalkyl substances (PFAS) distribution in landfill gas collection systems: leachate and gas condensate partitioning

While per- and polyfluoroalkyl substances (PFAS) have been reported extensively in municipal solid waste (MSW) landfill leachate,they have rarely been quantified in landfill gas or in discrete landfill liquids such as landfill gas condensate (LGC), and the potential for PFAS to partition to the condensate has not been reported. LGC and leachate collected from within gas wells known as gas well pump-out (GWP) from three MSW landfills underwent physical-chemical characterization and PFAS analysis to improve understanding of the conditions under which these liquids form and to illuminate PFAS behavior within landfills. LGC was observed to be clear liquid containing ammonia and alkalinity while GWP strongly resembled leachate - dark in color, high in chloride and ammonia. Notably, arsenic and antimony were found in concentrations exceeding regulatory thresholds by over two orders of magnitude in many LGC samples. LGC contained a lower average concentration of ΣPFAS (19,000 ng L) compared to GWP (56,000 ng L); however, LGC contained more diversity of PFAS, with 53 quantified compared to 44 in GWP. LGC contained proportionally more precursor PFAS than GWP, including more semi-volatile PFAS which are rarely measured in water matrices, such as fluorotelomer alcohols and perfluoroalkane sulfonamido ethanols. This study provides the first detailed comparison of these matrices to inform timely leachate management decisions.

Underestimation of Per- and Polyfluoroalkyl Substances in Biosolids: Precursor Transformation During Conventional Treatment

Wastewater treatment plants generate a solid waste known as biosolids. The most common management option for biosolids is to beneficially reuse them as an agricultural amendment, but because of the risk of pathogen exposure, many regulatory bodies require pathogen reduction before biosolids reuse. Per- and polyfluoroalkyl substances (PFAS) are well documented in biosolids, but limited information is available on how biosolids treatment processes impact PFAS. Furthermore, quantification of PFAS has focused on perfluoroalkyl acids (PFAAs) which are a small fraction of thousands of PFAS known to exist. The objective of this study was to quantify 92 PFAS in biosolids collected from eight biosolids treatment facilities before and after four pathogen treatment applications: composting, heat treatment, lime treatment, and anaerobic digestion. Overall, total PFAS concentrations before and after treatment were dominated by PFAA precursor species, in particular, diPAPs which accounted for a majority of the mass of the Σ92PFAS. This differs from historic data that found PFAAs, primarily PFOS, to dominate total PFAS concentrations. Treatment options such as heat treatment and composting changed the ratio of PFAA precursors to PFAAs indicating a transformation of PFAS during treatment. This study finds that PFAA precursors are likely underrepresented by other studies and make up a larger percentage of the total PFAS concentration in biosolids than previously estimated.

Evaluation of per- and polyfluoroalkyl substances (PFAS) in leachate, gas condensate, stormwater and groundwater at landfills

Per- and polyfluoroalkyl substances (PFAS), found in many consumer products, are commonly disposed of in landfills at the end of their service lives. To identify landfill liquids that should be prioritized for treatment, this study aimed to evaluate PFAS levels in different aqueous samples from landfills and identify relationships between PFAS and landfill characteristics. Twenty-six PFAS including 11 perfluoroalkyl carboxylic acids (PFCAs), 7 perfluoroalkyl sulfonates (PFSAs), and 8 perfluoroalkyl acid precursors (PFAA-precursors) were measured in municipal solid waste (MSW) leachate, construction and demolition debris (CDD) leachate, municipal solid waste incineration (MSWI) ash leachate, gas condensate, stormwater, and groundwater from landfills. Based on the median, results show that PFAS levels in MSW leachate were the highest (10,000 ng L-1), CDD leachate were intermediate (6200 ng L-1), and MSWI ash leachate were the lowest (1300 ng L-1) among the leachates evaluated. PFAS levels in gas condensate (7000 ng L-1) were similar to MSW leachate. PFAS in stormwater and groundwater were low (medians were less than 500 ng L-1). Dominant subgroups included PFCAs and PFAA-precursors in all leachates. PFSAs were also found in CDD leachate, PFAA-precursors in gas condensate, and PFCAs in stormwater and groundwater. Landfill characteristics significantly correlated with ∑26PFAS included waste proportions (percentage of MSWI ash in landfill, |rs| = 0.22), operational status (active or not, |rs| = 0.27) and rainfall (30-d cumulative rainfall, |rs| = 0.39). The results from this study can be used to prioritize which landfills and which reservoir of liquids (and corresponding subgroup of PFAS) to target for PFAS management.

Concentrations of perfluoroalkyl and polyfluoroalkyl substances before and after full-scale landfill leachate treatment

Many consumer and industrial products, industrial wastes and dewatered sludge from municipal wastewater treatment plants containing per- and polyfluoroalkyl substances (PFAS) are disposed of in landfills at the end of their usage, with PFAS in these products leached into landfill leachates. On-site leachate treatment is one possible method to reduce PFAS in leachates. Many landfills are equipped with on-site leachate treatment systems, but few full-scale facilities have been systematically evaluated for PFAS concentration changes. The objective of this study was to evaluate a cross-section of full-scale on-site landfill treatment systems to measure changes in PFAS concentrations. Leachate samples were collected before and after treatment from 15 facilities and were evaluated for 26 PFAS, including 11 perfluoroalkyl carboxylic acids (PFCAs), 7 perfluoroalkyl sulfonic acids (PFSAs), and 8 perfluoroalkyl acid precursors (PFAA-precursors). Transformation of precursors was evaluated by the total oxidizable precursor (TOP) assay. Results showed no obvious reductions in total measured PFAS (∑26PFAS) for on-site treatment systems including ponds, aeration tanks, powdered activated carbon (PAC), and sand filtration. Among evaluated on-site treatment systems, only systems fitted with reverse osmosis (RO) showed significant reductions (98-99 %) of ∑26PFAS in the permeate. Results from the TOP assay showed that untargeted PFAA-precursors converted into targeted short-chain PFCAs increasing ∑26PFAS in oxidized samples by 30 %, on average. Overall, results of this study confirm the efficacy of RO systems and suggest the presence of additional precursors beyond those measured in this study.

Municipal solid waste incineration (MSWI) ash co-disposal: Influence on per- and polyfluoroalkyl substances (PFAS) concentration in landfill leachate

Municipal solid waste incineration (MSWI) ash is often managed through co-disposal with unburned wastes in landfills, a practice previously reported to result in enhanced leaching of pollutants (e.g., heavy metals) in landfill leachate. The objective of this study was to evaluate the effect of co-disposed unburned wastes on per- and polyfluoroalkyl substances (PFAS) in MSWI ash landfill leachate. Leachate was collected from four landfills containing MSWI ash, either as a sole waste stream or co-disposed of with sewage sludge and MSW screenings. Samples of ash and unburned materials were collected and assessed separately for leachable PFAS in the laboratory. All samples were analyzed for 26 PFAS. Results showed that greater ash content was associated with lower leachate PFAS concentrations. The pure ash monofill exhibited the lowest PFAS in landfill leachate (290 ng L-1) while the landfill contained a large amount of unburned waste had the highest PFAS (11,000 ng L-1). For laboratory leaching tests, average ∑26PFAS concentration in lab ash leachate (310 ng L-1) was 10 and 24 times lower than observed in lab sewage sludge leachate (3,200 ng L-1) and lab MSW screenings leachate (7,500 ng L-1), respectively. Leachate from the ash-only landfill had ∑26PFAS concentration similar to what was measured in the ash itself. On the contrary, ∑26PFAS concentration in co-disposal landfill leachates were similar to those in PFAS-rich unburned waste itself, regardless of the percentages of landfilled unburned wastes. We hypothesize that leachate generated in co-disposal scenarios preferentially flows through PFAS-rich unburned materials and that biotransformation of precursors enhanced by unburned waste degradation further contributes to higher concentrations of terminal PFAS in ash co-disposal sites. Landfill operators should expect PFAS in leachates to be higher when PFAS-rich unburned wastes are disposed of alongside MSWI ash, even if the unburned fraction is small.

From Waste Collection Vehicles to Landfills: Indication of Per- and Polyfluoroalkyl Substance (PFAS) Transformation

Municipal solid waste contain diverse and significant amounts of per- and polyfluoroalkyl substances (PFAS), and these compounds may transform throughout the "landfilling" process from transport through landfill degradation. Fresh vehicle leachates, from commercial and residential waste collection vehicles at a transfer station, were measured for 51 PFAS. Results were compared to PFAS levels obtained from aged landfill leachate at the disposal facility. The landfill leachate was dominated by perfluoroalkyl acids (PFAAs, including perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs); 86% of the total PFAS, by median mass concentration), while the majority of PFAS present in commercial and residential waste vehicle leachate were PFAA-precursors (70% and 56% of the total PFAS, by median mass concentration, respectively), suggesting precursor transformation to PFAAs during the course of landfill disposal. In addition, several PFAS, which are not routinely monitored-perfluoropropane sulfonic acid (PFPrS), 8-chloro-perfluoro-1-octane sulfonic acid (8Cl-PFOS), chlorinated polyfluoroether sulfonic acids (6:2, 8:2 Cl-PFESAs), sodium dodecafluoro-3H-4,8-dioxanonanoate (NaDONA), and perfluoro-4-ethylcyclohexanesulfonate (PFECHS)-were detected. Potential degradation pathways were proposed based on published studies: transformation of polyfluoroalkyl phosphate diester (diPAPs) and fluorotelomer sulfonic acids (FTS) to form PFCAs via formation of intermediate products such as fluorotelomer carboxylic acids (FTCAs).

Removal of Stabilized Silver Nanoparticles from Surface Water by Conventional Treatment Processes

Engineered nanomaterials are used in many applications, including pollution sensors, photovoltaics, medical imaging, drug delivery and environmental remediation. Due to their numerous applications, silver nanoparticles (Ag NPs) are receiving a large amount of attention. Ag NPs may occur in drinking water sources either during manufacturing, consumption and/or disposal processes. This potentially leads to the presence of Ag NPs in finished drinking water, which could have public health impacts. The objective of this research was to investigate the removal of several types of stabilized Ag NPs by potable water treatment processes. Specifically, this research achieved these objectives through; 1) Synthesis of Citrate-reduced Ag NPs, Polyvinylpyrrolidone stabilized (PVP) Ag NPs and Branched polyethyleneimine stabilized (BPEI) Ag NPs, 2) Characterization of synthesized Ag NPs to determine their aggregation potential, Zeta potential profiles, (pHpzc) and obtain morphological data from SEM images, and 3) An evaluation of the efficacy of conventional water treatment processes (i.e., coagulation, flocculation, sedimentation and sand filtration) in removing stabilized Ag NPs from natural water. The three NPs were found to be stable at the nano size in natural water. Alum coagulation had no impact on the PVP and BPEI Ag NPs. Flocculation and settling were found to be key steps for removal of these NPs. The three Ag NPs were not permanently removed by means of conventional water treatment processes employed in this study.

Does Disposing of Construction and Demolition Debris in Unlined Landfills Impact Groundwater Quality? Evidence from 91 Landfill Sites in Florida

More than 1,500 construction and demolition debris (CDD) landfills operate in the United States (U.S.), and U.S. federal regulations do not require containment features such as low-permeability liners and leachate collection systems for these facilities. Here we evaluate groundwater quality from samples collected in groundwater monitoring networks at 91 unlined, permitted CDD landfills in Florida, U.S. A total of 460,504 groundwater sample results were analyzed, with a median of 10 years of quarterly or semiannual monitoring data per site including more than 400 different chemical constituents. Downgradient concentrations of total dissolved solids, sulfate, chloride, iron, ammonia-nitrogen, and aluminum were greater than upgradient concentrations (p < 0.05). At downgradient wells where sulfate concentrations were greater than 150 mg/L (approximately 10% of the maximum dissolved sulfate concentration in water, which suggests the presence of leachate from the landfill), iron and arsenic were detected in 91% and 43% of samples, with median concentrations of 1,900 μg/L and 11 μg/L, respectively. These results show that although health-based standards can be exceeded at unlined CDD landfills, the magnitude of detected chemical concentrations is generally small and reflective of leached minerals from components (wood, concrete, and gypsum drywall) that comprise the bulk of discarded CDD by mass.

Transient design of landfill liquid addition systems

This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al. (2010a, 2010b). The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.

Particle size, surface charge and concentration dependent ecotoxicity of three organo-coated silver nanoparticles: comparison between general linear model-predicted and observed toxicity

Mechanism underlying nanotoxicity has remained elusive. Hence, efforts to understand whether nanoparticle properties might explain its toxicity are ongoing. Considering three different types of organo-coated silver nanoparticles (AgNPs): citrate-coated AgNP, polyvinylpyrrolidone-coated AgNP, and branched polyethyleneimine-coated AgNP, with different surface charge scenarios and core particle sizes, herein we systematically evaluate the potential role of particle size and surface charge on the toxicity of the three types of AgNPs against two model organisms, Escherichia coli and Daphnia magna. We find particle size, surface charge, and concentration dependent toxicity of all the three types of AgNPs against both the test organisms. Notably, Ag(+) (as added AgNO3) toxicity is greater than each type of AgNPs tested and the toxicity follows the trend: AgNO3 > BPEI-AgNP > Citrate-AgNP > PVP-AgNP. Modeling particle properties using the general linear model (GLM), a significant interaction effect of primary particle size and surface charge emerges that can explain empirically-derived acute toxicity with great precision. The model explains 99.9% variation of toxicity in E. coli and 99.8% variation of toxicity in D. magna, revealing satisfactory predictability of the regression models developed to predict the toxicity of the three organo-coated AgNPs. We anticipate that the use of GLM to satisfactorily predict the toxicity based on nanoparticle physico-chemical characteristics could contribute to our understanding of nanotoxicology and underscores the need to consider potential interactions among nanoparticle properties when explaining nanotoxicity.

Key factors controlling the transport of silver nanoparticles in porous media

The current study investigated the mobility of four silver nanoparticles (AgNPs) stabilized using different capping agents and represent the common stabilization mechanisms as well as surface charging scenarios in reactive and nonreactive porous media. The AgNPs were (1) uncoated H2-AgNPs (electrostatically stabilized) and (2) citrate coated AgNPs (Citrate-AgNPs) (electrostatically stabilized), (3) polyvinylpyrrolidone coated AgNPs (PVP-AgNPs) (sterically stabilized), and (4) branched polyethyleneimine coated AgNPs (BPEI-AgNPs) (electrosterically stabilized). The porous media were (1) quartz sand (QS), (2) ferrihydrite-coated sand (FcS), and (3) kaolin-coated sand (KcS). The H2-AgNPs and Citrate-AgNPs were readily mobile in QS but significantly retained in FcS and KcS with more deposition achieved in the KcS media. The deposition of the H2-AgNPs and Citrate-AgNPs followed the order of KcS > FcS > QS. The PVP-AgNPs breakthrough occurred more rapid as compared to the H2-AgNPs and Citrate-AgNPs but the deposition of PVP-AgNPs followed the same order of the electrostatically stabilized AgNPs (KcS > FcS > QS). The BPEI-AgNPs were readily mobile regardless of the porous media reactivity. Physicochemical interactions were the dominant filtration mechanism in the majority of the investigated cases but straining played the major role in the deposition of the electrostatically stabilized H2-AgNPs and Citrate-AgNPs in the KcS media. The results highlight the importance of both the stabilization mechanism and capping agent chemistry as key factors governing the transport of AgNPs in the environment.

Rapid screening of aquatic toxicity of several metal-based nanoparticles using the MetPLATE™ bioassay

Current understanding of potential toxicity of engineered nanomaterials to aquatic microorganisms is limited for risk assessment and management. Here we evaluate if the MetPLATE™ test can be used as an effective and rapid screening tool to test for potential aquatic toxicity of various metal-based nanoparticles (NPs). The MetPLATE bioassay is a heavy metal sensitive test based on β-galactosidase activity in Escherichia coli. Five different types of metal-based NPs were screened for toxicity: (1) citrate coated nAg (Citrate-nanosilver), (2) polyvinylpyrrolidone coated nAg (PVP-nAg), (3) uncoated nZnO, (4) uncoated nTiO(2) and (5) 1-Octadecylamine coated CdSe Quantum Dots (CdSe QDs); and compared with their corresponding ionic salt toxicity. Citrate-nAg was further fractionated into clean Citrate-nAg, unclean Citrate-nAg and permeate using a tangential flow filtration (TFF) system to eliminate residual ions and impurities from the stock Citrate-nAg suspension and also to differentiate between ionic- versus nano-specific toxicity. Our results showed that nAg, nZnO and CdSe QDs were less toxic than their corresponding ionic salts tested, while nano- or ionic form of TiO(2) was not toxic as high as 2.5 g L(-1) to the MetPLATE™ bacteria. Although coating-dependent toxicity was noticeable between two types of Ag NPs evaluated, particle size and surface charge were not adequate to explain the observed toxicity; hence, the toxicity appeared to be material-specific. Overall, the toxicity followed the trend: CdCl(2)>AgNO(3)>PVP-nAg>unclean Citrate-nAg>clean Citrate-nAg>ZnSO(4)>nZnO>CdSe QDs>nTiO(2)/TiO(2). These results indicate that an evaluation of β-galactosidase inhibition in MetPLATE™ E. coli can be an important consideration for rapid screening of metal-based NP toxicity, and should facilitate ecological risk assessment of these emerging contaminants.

Surface charge-dependent toxicity of silver nanoparticles

As a result of the extensive number of applications of silver nanoparticles (AgNPs), their potential impacts, once released into the environment, are of concern. The toxicity of AgNPs was reported to be dependent on various factors such as particle size, shape and capping agent. Although these factors may play a role in AgNPs toxicity, the results presented herein suggest that surface charge is one of the most important factors that govern the toxicity of AgNPs. In the current study, the toxicity of four AgNPs representing various surface charging scenarios ranging from highly negative to highly positive was investigated. These AgNPs were (1) uncoated H(2)-AgNPs, (2) citrate coated AgNPs (Citrate-AgNPs), (3) polyvinylpyrrolidone coated AgNPs (PVP-AgNPs), and (4) branched polyethyleneimine coated AgNPs (BPEI-AgNPs). Our results clearly demonstrate that the AgNPs exhibited surface charge-dependent toxicity on the bacillus species investigated. Furthermore, ultrafiltration membranes were utilized to purify the AgNPs suspensions from residual impurities prior to the introduction to the microbes. This step was crucial in determining the true AgNPs toxicity and is either missing or not explicitly mentioned in most of the reported toxicity studies.

Steady-state design of horizontal systems for liquids addition at bioreactor landfills

The key parameters for designing a horizontal source (horizontal trenches, infiltration ponds, infiltration galleries or blankets) for steady state are the rate liquids can be added to the source, the lateral and vertical extents of the zone of impact of the source, and the liquids volume needed to wet the waste within the zone of impact at steady state. This paper presents charts that a designer can use to estimate these key parameters as functions of source dimensions, injection pressure, and municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy) for designing a new or analyzing an existing horizontal source system for liquids addition to landfilled waste. SEEP/W was used to model liquids flow from a horizontal source in a range of conditions practically encountered for such systems. The governing equation (Richard's equation) and the boundary conditions were analyzed to formulate dimensionless variables by normalizing the design parameters (flow rate, injection pressure, the lateral zone of impact, injection pressure, and the added liquids volume) with the waste properties and source dimensions. The simulation results were transformed to the respective dimensionless forms and presented in design charts to estimate the key design parameters as functions of the source dimensions, waste properties, and injection pressure. The presentation of the modeling results in the dimensionless form facilitates their use beyond the conditions modeled. A solved example is presented to demonstrate the use of the design charts. The approach presented in the paper should be considered as approximate and designers should use their judgement and experience when using these charts for designing a horizontal liquids addition system for a specific site.

Steady-state design of vertical wells for liquids addition at bioreactor landfills

The rate at which liquids can be added to a vertical well, the lateral zone of impact of the well, and the liquids volume needed to wet the waste within the zone of impact of the well are the key inputs needed to design a vertical well system. This paper presents design charts that can be used to estimate these inputs as a function of municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy ratio), well dimensions (radius and screen length), and injection pressure. SEEP/W modeling was conducted to estimate the key design inputs for a range of conditions practically encountered for a vertical well installed in landfilled waste. The flow rate, lateral zone of impact of a well, liquids volume added, and injection pressure were normalized with the waste properties and well dimensions to formulate dimensionless variables. A series of design charts were created to present dimensionless steady-state flow rate, lateral zone of impact, and the dimensionless liquid volume needed to reach a steady-state condition, as a function of dimensionless input variables. By using dimensionless variables formulated for this work, these charts permit the user to estimate the steady-state design variables described above for a wide range of configurations and conditions beyond those simulated without the need for further modeling. The results of the study suggest that the lateral extent of the well can be estimated using Darcy's equation and assuming saturated unit-gradient vertical flow regime below the well bottom. An example problem is presented to illustrate the use of the design charts. The scenario described in the example problem was also modeled with SEEP/W, and the results were compared with those obtained from the design charts to demonstrate the validity of design charts for scenarios other than those used for the development of the design charts. The methodology presented in this paper should be thought of as a means to provide a set of bounds that an engineer can use along with their judgment in the design of a system for a specific site.

Impact of environmental conditions (pH, ionic strength, and electrolyte type) on the surface charge and aggregation of silver nanoparticles suspensions

The impact of capping agents and environmental conditions (pH, ionic strength, and background electrolytes) on surface charge and aggregation potential of silver nanoparticles (AgNPs) suspensions were investigated. Capping agents are chemicals used in the synthesis of nanoparticles to prevent aggregation. The AgNPs examined in the study were as follows: (a) uncoated AgNPs (H(2)-AgNPs), (b) electrostatically stabilized (citrate and NaBH(4)-AgNPs), (c) sterically stabilized (polyvinylpyrrolidone (PVP)-AgNPs), and (d) electrosterically stabilized (branched polyethyleneimine (BPEI)-AgNPs)). The uncoated (H(2)-AgNPs), the citrate, and NaBH(4)-coated AgNPs aggregated at higher ionic strengths (100 mM NaNO(3)) and/or acidic pH (3.0). For these three nanomaterials, chloride (Cl(-), 10 mM), as a background electrolyte, resulted in a minimal change in the hydrodynamic diameter even at low pH (3.0). This was limited by the presence of residual silver ions, which resulted in the formation of stable negatively charged AgCl colloids. Furthermore, the presence of Ca(2+) (10 mM) resulted in aggregation of the three previously identified AgNPs regardless of the pH. As for PVP coated AgNPs, the ionic strength, pH and electrolyte type had no impact on the aggregation of the sterically stabilized AgNPs. The surface charge and aggregation of the BPEI coated AgNPs varied according to the solution pH.

Synchrotron speciation of silver and zinc oxide nanoparticles aged in a kaolin suspension

Assessments of the environmental fate and mobility of nanoparticles must consider the behavior of nanoparticles in relevant environmental systems that may result in speciation changes over time. Environmental conditions may act on nanoparticles to change their size, shape, and surface chemistry. Changing these basic characteristics of nanoparticles may result in a final reaction product that is significantly different than the initial nanomaterial. As such, basing long-term risk and toxicity on the initial properties of a nanomaterial may lead to erroneous conclusions if nanoparticles change upon release to the environment. The influence of aging on the speciation and chemical stability of silver and zinc oxide nanoparticles in kaolin suspensions was examined in batch reactors for up to 18 months. Silver nanoparticles remained unchanged in sodium nitrate suspensions; however, silver chloride was identified with the metallic silver nanoparticles in sodium chloride suspensions and may be attributed to an in situ silver chloride surface coating. Zinc oxide nanoparticles were rapidly converted via destabilization/dissolution mechanisms to Zn(2+) inner-sphere sorption complexes within 1 day of reaction and these sorption complexes were maintained through the 12 month aging processes. Chemical and physical alteration of nanomaterials in the environment must be examined to understand fate, mobility, and toxicology.

An evidence-based environmental perspective of manufactured silver nanoparticle in syntheses and applications: a systematic review and critical appraisal of peer-reviewed scientific papers

BACKGROUND

Most recently, renewed interest has arisen in manufactured silver nanomaterials because of their unusually enhanced physicochemical properties and biological activities compared to the bulk parent materials. A wide range of applications has emerged in consumer products ranging from disinfecting medical devices and home appliances to water treatment. Because the hypothesized mechanisms that govern the fate and transport of bulk materials may not directly apply to materials at the nanoscale, there are great concerns in the regulatory and research communities about potential environmental impacts associated with the use of silver nanoparticles. In particular, the unlimited combinations of properties emerging from the syntheses and applications of silver nanoparticles are presenting an urgent need to document the predominant salt precursors, reducing agents and stabilizing agents utilized in the synthesis processes of silver nanoparticles to guide the massive efforts required for environmental risk assessment and management.

OBJECTIVES

The primary objective of this study is to present an evidence-based environmental perspective of silver nanoparticle properties in syntheses and applications. The following specific aims are designed to achieve the study objective: Aim 1--to document the salt precursors and agents utilized in synthesizing silver nanoparticles; Aim 2--to determine the characteristics of silver nanoparticles currently in use in the scientific literature when integrated in polymer matrices to form nanocomposites and combined with other metal nanoparticles to form bimetallic nanoparticles; Aim 3--to provide a summary of the morphology of silver nanoparticles; and (4) Aim 4--to provide an environmental perspective of the evidence presented in Aims 1 to 3.

METHODS

A comprehensive electronic search of scientific databases was conducted in support of the study objectives. Specific inclusion criteria were applied to gather the most pertinent research articles. Data and information extraction relied on the type of synthesis methods, that is, synthesized silver nanoparticles in general and specific applications, nanocomposites, and bimetallic techniques. The following items were gathered for: type of silver salt, solvent, reducing agent, stabilizing agent, size, and type of application/nanocomposite/bimetallic, and template (for nanocomposites). The description of evidence was presented in tabular format. The critical appraisal was analyzed in graphical format and discussed.

RESULTS

An analysis of the scientific literature suggests that most synthesis processes produce spherical silver nanoparticles with less than 20nm diameter. Silver nanoparticles are often synthesized via reduction of AgNO(3), dissolution in water, and utilization of reductants also acting as capping or stabilizing agents for the control of particle size to ensure a relatively stable suspension. Two of the most commonly used reductants and stabilizing agents are NaBH(4) and citrate which yield particles with a negative surface charge over the environmental pH range (3-10). The environmental perspectives of these parameters are discussed.

CONCLUDING REMARKS

It is expected that the antibacterial property of bulk silver is carried over and perhaps enhanced, to silver nanoparticles. Therefore, when one examines the environmental issues associated with the manufacture and use of silver nanoparticle-based products, the antibacterial effects should always be taken into account particularly at the different stages of the product lifecycle. Currently, there are two arguments in the scientific literature about the mechanisms of antimicrobial properties of silver nanoparticles as they relate to colloidal silver particles and inonic silver. Methodologies of risk assessment and control have to account for both arguments.

Evaluation of landfill gas decay constant for municipal solid waste landfills operated as bioreactors

Prediction of the rate of gas production from bioreactor landfills is important for the optimization of energy recovery and for estimating greenhouse gas emissions. To improve the predictability of gas production, landfill gas (LFG) composition and flow rates were monitored for 4 yr from one conventional and two bioreactor landfill cells at the Outer Loop Landfill in Louisville, KY. The ultimate methane yield (L(o)) was estimated from the biochemical methane (CH4) potential of freshly buried refuse and the decay rate constant (k) was estimated from measured CH4 collection. The site-specific L(o) was estimated to be 48.4 m3-CH4 wet Mg(-1). The estimated decay rate in the conventional cell (0.06 yr(-1)) was comparable to the AP-42 default value of 0.04 yr(-1), whereas estimates for the two bioreactor cells were substantially higher (approximately 0.11 yr(-1)). The data document the ability of the bioreactor operation to enhance landfill CH4 generation, although the estimated decay rate is sensitive to the selected L(o). The more rapid decomposition in the bioreactor cells reduces the length of time over which gas will be produced and emphasizes the importance of having a LFG collection system operational once the waste receives added moisture.

The speciation of silver nanoparticles in antimicrobial fabric before and after exposure to a hypochlorite/detergent solution

Because of their antibacterial properties, silver nanoparticles are often used in consumer products. To assess environmental and/or human health risks from these nanoparticles, there is a need to identify the chemical transformations that silver nanoparticles undergo in different environments. Thus an antimicrobial sock material containing Ag nanoparticles was examined by X-ray absorption spectroscopy to identify the speciation of Ag. The material was exposed to a hypochlorite/detergent solution and subjected to agitation. An elemental Ag nanopowder was also exposed to the hypochlorite/detergent solution or to a 1 mol L(-1) NaCl solution. Results showed that the sock material nanoparticles consisted of elemental Ag. After exposure to the hypochlorite/detergent solution, a significant portion (more than 50%) of the sock nanoparticles were converted, in situ, to AgCl. Results from exposures to elemental Ag nanopowder suggest that an oxidation step is necessary for the elemental Ag nanoparticles to transform into AgCl as there was no evidence of AgCl formation in the presence of chloride alone. As a result, if Ag ions leach from consumer products, any chloride present may quickly scavenge the ions. In addition, the efficacy of Ag, as an antimicrobial agent in fabrics, may be limited, or even negated, after washing in solutions containing oxidizers as AgCl is much less reactive than Ag ion.