Angstrom-Confined Electrochemical Synthesis of Sub-Unit-Cell Non-Van Der Waals 2D Metal Oxides

Bottom-up electrochemical synthesis of atomically thin materials is desirable yet challenging, especially for non-vanderWaals (non-vdW) materials. Thicknesses below a few nanometers have not been reported yet, posing the question how thin can non-vdW materials be electrochemically synthesized. This is important as materials with (sub-)unit-cell thickness often show remarkably different properties compared to their bulk form or thin films of several nanometers thickness. Here, a straightforward electrochemical method utilizing the angstrom-confinement of laminar reduced graphene oxide (rGO) nanochannels is introduced to obtain a centimeter-scale network of atomically thin (<4.3 Å) 2D-transition metal oxides (2D-TMO). The angstrom-confinement provides a thickness limitation, forcing sub-unit-cell growth of 2D-TMO with oxygen and metal vacancies. It is showcased that Cr₂ O₃ , a material without significant catalytic activity for the oxygen evolution reaction (OER) in bulk form, can be activated as a high-performing catalyst if synthesized in the 2D sub-unit-cell form. This method displays the high activity of sub-unit-cell form while retaining the stability of bulk form, promising to yield unexplored fundamental science and applications. It is shown that while retaining the advantages of bottom-up electrochemical synthesis, like simplicity, high yield, and mild conditions, the thickness of TMO can be limited to sub-unit-cell dimensions.

Mass Transport via In-Plane Nanopores in Graphene Oxide Membranes

Angstrom-confined solvents in 2D laminates can travel through interlayer spacings, through gaps between adjacent sheets, and via in-plane pores. Among these, experimental access to investigate the mass transport through in-plane pores is lacking. Our experiments allow an understanding of this mass transport via the controlled variation of oxygen functionalities, size and density of in-plane pores in graphene oxide membranes. Contrary to expectations, our transport experiments show that higher in-plane pore densities may not necessarily lead to higher water permeability. We observed that membranes with a high in-plane pore density but a low amount of oxygen functionalities exhibit a complete blockage of water. However, when water-ethanol mixtures with a weaker hydrogen network are used, these membranes show an enhanced permeation. Our combined experimental and computational results suggest that the transport mechanism is governed by the attraction of the solvents toward the pores with functional groups and hindered by the strong hydrogen network of water formed under angstrom confinement.

Functional groups in graphene oxide

Graphene oxide consists of diverse surface chemistry which allows tethering GO with additional functionalities and tuning its intrinsic properties. This review summarizes recently advanced methods to covalently modify GO for specific applications.

Large-Area, Two-Dimensional MoS2 Exfoliated on Gold: Direct Experimental Access to the Metal-Semiconductor Interface

Two-dimensional semiconductors such as MoS₂ are promising for future electrical devices. The interface to metals is a crucial and critical aspect for these devices because undesirably high resistances due to Fermi level pinning are present, resulting in unwanted energy losses. To date, experimental information on such junctions has been obtained mainly indirectly by evaluating transistor characteristics. The fact that the metal-semiconductor interface is typically embedded, further complicates the investigation of the underlying physical mechanisms at the interface. Here, we present a method to provide access to a realistic metal-semiconductor interface by large-area exfoliation of single-layer MoS₂ on clean polycrystalline gold surfaces. This approach allows us to measure the relative charge neutrality level at the MoS₂-gold interface and its spatial variation almost directly using Kelvin probe force microscopy even under ambient conditions. By bringing together hitherto unconnected findings about the MoS₂-gold interface, we can explain the anomalous Raman signature of MoS₂ in contact to metals [ACS Nano. 7, 2013, 11350] which has been the subject of intense recent discussions. In detail, we identify the unusual Raman mode as the A_1g mode with a reduced Raman shift (397 cm^-1) due to the weakening of the Mo-S bond. Combined with our X-ray photoelectron spectroscopy data and the measured charge neutrality level, this is in good agreement with a previously predicted mechanism for Fermi level pinning at the MoS₂-gold interface [Nano Lett. 14, 2014, 1714]. As a consequence, the strength of the MoS₂-gold contact can be determined from the intensity ratio between the reduced A_1greduced mode and the unperturbed A_1g mode.

Chemical Vapour Deposition of Graphene for Durable Anticorrosive Coating on Copper

Due to the excellent chemical inertness, graphene can be used as an anti-corrosive coating to protect metal surfaces. Here, we report the growth of graphene by using a chemical vapour deposition (CVD) process with ethanol as a carbon source. Surface and structural characterisations of CVD grown films suggest the formation of double-layer graphene. Electrochemical impedance spectroscopy has been used to study the anticorrosion behaviour of the CVD grown graphene layer. The observed corrosion rate of 8.08 × 10-14 m/s for graphene-coated copper is 24 times lower than the value for pure copper which shows the potential of graphene as the anticorrosive layer. Furthermore, we observed no significant changes in anticorrosive behaviour of the graphene coated copper samples stored in ambient environment for more than one year.

Selective Proton Transport for Hydrogen Production Using Graphene Oxide Membranes

Graphene oxide has shown exceptional properties in terms of water permeability and filtration characteristics. Here the suitability of graphene oxide membranes for the spatial separation of hydronium and hydroxide ions after photocatalytic water splitting is demonstrated. Instead of relying on classical size exclusion by adjusting the membrane laminates' interlayer spacings, nonmodified graphene oxide is used to exploit the presence of its natural functional groups and surface charges for filtration. Despite a significantly larger interlayer spacing inside the membrane compared with the size of the hydrated radii of the ions, highly asymmetric transport behavior and a 6 times higher mobility for hydronium than for hydroxide are observed. DFT simulations reveal that hydroxide ions are more prone to interact and stick to the functional groups of graphene oxide, while diffusion of hydronium ions through the membrane is less impeded and aligns well with the concept of the Grotthuss mechanism.

Effective Separation of CO2 Using Metal-Incorporated rGO Membranes

Graphene-based materials, primarily graphene oxide (GO), have shown excellent separation and purification characteristics. Precise molecular sieving is potentially possible using graphene oxide-based membranes, if the porosity can be matched with the kinetic diameters of the gas molecules, which is possible via the tuning of graphene oxide interlayer spacing to take advantage of gas species interactions with graphene oxide channels. Here, highly effective separation of gases from their mixtures by using uniquely tailored porosity in mildly reduced graphene oxide (rGO) based membranes is reported. The gas permeation experiments, adsorption measurement, and density functional theory calculations show that this membrane preparation method allows tuning the selectivity for targeted molecules via the intercalation of specific transition metal ions. In particular, rGO membranes intercalated with Fe ions that offer ordered porosity, show excellent reproducible N₂ /CO₂ selectivity of ≈97 at 110 mbar, which is an unprecedented value for graphene-based membranes. By exploring the impact of Fe intercalated rGO membranes, it is revealed that the increasing transmembrane pressure leads to a transition of N₂ diffusion mode from Maxwell-Stefan type to Knudsen type. This study will lead to new avenues for the applications of graphene for efficiently separating CO₂ from N₂ and other gases.

Electrical transport and persistent photoconductivity in monolayer MoS2 phototransistors

We study electrical transport properties in exfoliated molybdenum disulfide (MoS₂) back-gated field effect transistors at low drain bias and under different illumination intensities. It is found that photoconductive and photogating effect as well as space charge limited conduction can simultaneously occur. We point out that the photoconductivity increases logarithmically with the light intensity and can persist with a decay time longer than 10⁴ s, due to photo-charge trapping at the MoS₂/SiO₂ interface and in MoS₂ defects. The transfer characteristics present hysteresis that is enhanced by illumination. At low drain bias, the devices feature low contact resistance of [Formula: see text] ON current as high as [Formula: see text] 10⁵ ON-OFF ratio, mobility of ∼1 cm² V^-1 s^-1 and photoresponsivity [Formula: see text].