Mono- and bimetallic manganese-carbonyl complexes and clusters bearing imidazol(in)ium-2-dithiocarboxylate ligands

Five complexes with the generic formula fac-[MnBr(CO)₃(S₂C·NHC)] were obtained by reacting [MnBr(CO)₅] with a set of representative imidazol(in)ium-2-dithiocarboxylate zwitterions. These ligands are the adducts of N-heterocyclic carbenes (NHCs) and carbon disulfide. The mononuclear Mn(i) derivatives were coupled with Na[Mn(CO)₅] to afford bimetallic [Mn₂(CO)₆(S₂C·NHC)] clusters. Yet, the most convenient strategy to access these dinuclear Mn(0) products implied a direct carbonyl substitution from the [Mn₂(CO)₁₀] dimer. The molecular structures of three monometallic and four bimetallic compounds were elucidated by single crystal X-ray diffraction analysis. In the monometallic complexes, the NHC·CS₂ ligands exhibited a bidentate κ²-S,S' coordination mode with an S-C-S bite angle of about 116°. In the dinuclear clusters, the CS₂^- unit acted as a chelate toward one manganese center and as a pseudoallylic ligand toward the other one. The S-C-S bite angle was reduced to ca. 104°. Thus, the zwitterions displayed a remarkable flexibility, which also permitted a staggered arrangement of the carbonyl groups in the bimetallic systems. Examination of the [small nu, Greek, macron]_CO absorption bands on IR spectroscopy helped identify the presence of fac-Mn(CO)₃ or Mn₂(CO)₆ motifs, while the ¹³C NMR chemical shift of the CS₂^- moiety was a reliable indicator for monitoring its hapticity. Whereas the dinuclear clusters were air- and moisture-stable crystalline solids, mononuclear halido derivatives displayed only a limited stability under aerobic conditions. Both types of compounds underwent rather unselective, extensive fragmentations in the gas phase, in sharp contrast with the analogous rhenium derivatives that led to clean sequential decarbonylation processes upon collision-induced dissociation.

Small iron-carbonyl clusters bearing imidazolium-2-trithioperoxycarboxylate ligands

The reaction of [Fe₂(CO)₉] with two representative imidazolium-2-dithiocarboxylate zwitterions derived from common N-heterocyclic carbenes (NHCs) bearing mesityl (IMes) or 2,6-diisopropylphenyl substituents on their nitrogen atoms (IDip) unexpectedly afforded two small bimetallic iron-carbonyl clusters with the generic formula [Fe₂(CO)₆(μ-κ²-S,S'-κ²-S,S'-S₃C·NHC)]. After a brief optimization of the reaction conditions, these two "sulfur-enriched" products were isolated in low yields. They were fully characterized by IR, NMR, UV/Visible, and ESI-MS techniques, and their molecular structures were determined by single crystal X-ray diffraction analysis. The two compounds adopted a butterfly-type disposition in the solid state, with an [Fe₂(CO)₆] core bridged by the trithioperoxycarboxylate moiety of the in situ generated NHC·CS₃ ligands. Bond lengths recorded for the CS₃^- unit revealed that its negative charge was mostly located on the remote sulfur atom.

Synthesis and complexation of superbulky imidazolium-2-dithiocarboxylate ligands

The superbulky N-heterocyclic carbenes (NHCs) 2,6-bis(diphenylmethyl)-4-methylimidazol-2-ylidene (IDip*Me) and its 4-methoxy analogue (IDip*OMe) reacted instantaneously with carbon disulfide to afford the corresponding imidazolium-2-dithiocarboxylate zwitterions in high yields. These new dithiolate ligands were fully characterized and their coordination chemistry toward common Re(i) and Ru(ii) metal sources was thoroughly investigated. Neutral [ReBr(CO)₃(S₂C·NHC)] chelates featured three facially-arranged carbonyl groups on a distorted octahedron, whereas cationic [RuCl(p-cymene)(S₂C·NHC)]PF₆ complexes displayed a piano-stool geometry. The molecular structures of the six new compounds revealed that the NHC·CS₂ inner salts were highly flexible. Indeed, the torsion angle between their anionic and cationic moieties varied between ca. 63° in the free ligands and 3° in the ruthenium complexes. Concomitantly, the S-C-S bite angle underwent a contraction from 131° to 110-113° upon chelation. Computation of the %V_Bur parameter showed that the dithiocarboxylate unit of the NHC·CS₂ betaines chiefly determined the steric requirements of the imidazolium moieties, irrespective of the metal center involved in the complexation. The replacement of the p-methyl substituents of IDip*Me with p-methoxy groups in IDip*OMe did not significantly affect the ligand bulkiness. The more electron-donating methoxy group led, however, to small changes in various IR wavenumbers used to probe the electron donor properties of the carbene moiety.

Synthesis, characterization, and gas-phase fragmentation of rhenium-carbonyl complexes bearing imidazol(in)ium-2-dithiocarboxylate ligands

Five complexes with the generic formula [ReBr(CO)₃(κ²-S,S'-S₂C·NHC)] were obtained by reacting [ReBr(CO)₅] with a set of representative imidazol(in)ium-2-dithiocarboxylate zwitterions. These ligands are the adducts of N-heterocyclic carbenes (NHCs) and carbon disulfide. The monometallic Re(i) compounds were further coupled with Na[Re(CO)₅] to afford bimetallic Re(0) species. Depending on the experimental conditions, either octacarbonyl dimers [Re₂(CO)₈(μ₂-κ¹-S,κ¹-S'-S₂C·NHC)] or hexacarbonyl clusters [Re₂(CO)₆(κ²-S,S'-κ³-S,C,S'-S₂C·NHC)] were isolated. All the products were fully characterized using various analytical techniques. Single crystal XRD analysis helped establish with certainty the various binding modes exhibited by the NHC·CS₂ ligands. With bite angles ranging from ca. 104 to 130°, these zwitterions displayed a remarkable flexibility, which also permitted significant twists of the thiometallated rings to preserve a staggered arrangement of the carbonyl groups in the bimetallic systems. Monitoring the chemical shift of the CS₂^- moiety by ¹³C NMR spectroscopy was most useful to detect its change of hapticity upon decarbonylation of the octacarbonyl compounds into hexacarbonyl derivatives. IR spectroscopy was another very convenient tool to identify the type of complex formed in a reaction, based on the pattern of its carbonyl vibration bands. Advanced mass spectrometry techniques showed that all the compounds underwent partial or total decarbonylation in the gas phase with no concomitant fragmentation of the bimetallic assemblies into monometallic ions.

Synthesis and structure of trinuclear W3S4 clusters bearing aminophosphine ligands and their reactivity toward halides and pseudohalides

The aminophosphine ligand (2-aminoethyl)diphenylphosphine (edpp) has been coordinated to the W3(μ-S)(μ-S)3 cluster unit to afford trimetallic complex [W3S4Br3(edpp)3](+) (1(+)) in a one-step synthesis process with high yields. Related [W3S4X3(edpp)3](+) clusters (X = F(-), Cl(-), NCS(-); 2(+)-4(+)) have been isolated by treating 1(+) with the corresponding halide or pseudohalide salt. The structure of complexes 1(+) to 4(+) contains an incomplete W3S4 cubane-type cluster unit, and only one of the possible isomers is formed: the one with the phosphorus atoms trans to the capping sulfur and the amino groups trans to the bridging sulphurs. The remaining coordination position on each metal is occupied by X. Detailed studies using stopped-flow, (31)P{(1)H} NMR, and ESI-MS have been carried out in order to understand the solution behavior and the kinetics of interconversion among species 1(+), 2(+), 3(+), and 4(+) in solution. Density functional theory (DFT) calculations have been also carried out on the reactions of cluster 1(+) with the different anions. The whole set of experimental and theoretical data indicate that the actual mechanism of substitutions in these clusters is strongly dependent on the nature of the leaving and entering anions. The interaction between an entering F(-) and the amino group coordinated to the adjacent metal have also been found to be especially relevant to the kinetics of these reactions.

Influence of the ligand alkyl chain length on the solubility, aqueous speciation, and kinetics of substitution reactions of water-soluble M3S4 (M = Mo, W) clusters bearing hydroxyalkyl diphosphines

Water-soluble [M3S4X3(dhbupe)3](+) diphosphino complexes (dhbupe = 1,2-bis(bis(hydroxybutyl)phosphino)ethane), 1(+) (M = Mo, X = Cl) and 2(+) (M = W; X = Br), have been synthesized by extending the procedure used for the preparation of their hydroxypropyl analogues by reaction of the M3S4(PPh3)3X4(solvent)x molecular clusters with the corresponding 1,2-bis(bishydroxyalkyl)diphosphine. The solid state structure of the [M3S4X3(dhbupe)3](+) cation possesses a C3 symmetry with a cuboidal M3S4 unit, and the outer positions are occupied by one halogen and two phosphorus atoms of the diphosphine ligand. At a basic pH, the halide ligands are substituted by hydroxo groups to afford the corresponding [Mo3S4(OH)3(dhbupe)3](+) (1OH(+)) and [W3S4(OH)3(dhbupe)3](+) (2OH(+)) complexes. This behavior is similar to that found in 1,2-bis(bis(hydroxymethyl)phosphino)ethane (dhmpe) complexes and differs from that observed for 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe) derivatives. In the latter case, an alkylhydroxo group of the functionalized diphosphine replaces the chlorine ligands to afford Mo3S4 complexes in which the deprotonated dhprpe acts in a tridentate fashion. Detailed studies based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques have been carried out in order to understand the solution behavior and kinetics of interconversion between the different species formed in solution: 1 and 1OH(+) or 2 and 2OH(+). On the basis of the kinetic results, a mechanism with two parallel reaction pathways involving water and OH(-) attacks is proposed for the formal substitution of halides by hydroxo ligands. On the other hand, reaction of the hydroxo clusters with HX acids occurs with protonation of the OH(-) ligands followed by substitution of coordinated water by X(-).

Water-soluble Mo3S4 clusters bearing hydroxypropyl diphosphine ligands: synthesis, crystal structure, aqueous speciation, and kinetics of substitution reactions

The [Mo(3)S(4)Cl(3)(dhprpe)(3)](+) (1(+)) cluster cation has been prepared by reaction between Mo(3)S(4)Cl(4)(PPh(3))(3) (solvent)(2) and the water-soluble 1,2-bis(bis(hydroxypropyl)phosphino)ethane (dhprpe, L) ligand. The crystal structure of [1](2)[Mo(6)Cl(14)] has been determined by X-ray diffraction methods and shows the typical incomplete cuboidal structure with a capping and three bridging sulfides. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of the diphosphine ligand. Depending on the pH, the hydroxo group of the functionalized diphosphine can substitute the chloride ligands and coordinate to the cluster core to give new clusters with tridentate deprotonated dhprpe ligands of formula [Mo(3)S(4)(dhprpe-H)(3)](+) (2(+)). A detailed study based on stopped-flow, (31)P{(1)H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of acid-base equilibria and the kinetics of interconversion between the 1(+) and the 2(+) forms. Both conversion of 1(+) to 2(+) and its reverse process occur in a single kinetic step, so that reactions proceed at the three metal centers with statistically controlled kinetics. The values of the rate constants under different conditions are used to discuss on the mechanisms of opening and closing of the chelate rings with coordination or dissociation of chloride.