Impact of Growth Conditions on Pseudomonas fluorescens Morphology Characterized by Atomic Force Microscopy

This work is dedicated to the characterization by Atomic Force Microscopy (AFM) of Pseudomonas fluorescens, bacteria having high potential in biotechnology. They were first studied first in optimal conditions in terms of culture medium and temperature. AFM revealed a more-or-less elongated morphology with typical dimensions in the micrometer range, and an organization of the outer membrane characterized by the presence of long and randomly distributed ripples, which are likely related to the organization of lipopolysaccharides (LPS). The outer membrane also presents invaginations, some of them showing a reorganization of ripples, which could be the first sign of a bacterial stress response. In a second step, bacteria grown under unfavorable conditions were characterized. The choice of the medium appeared to be more critical in the case of the second generation of cells, the less adapted medium inducing not only changes in the membrane organization but also larger damages in bacteria. An increased growth temperature affected both the usual “swollen” morphology and the organization of the outer membrane. Here also, LPS likely contribute to membrane remodelling, which makes them potential markers to track cell state changes.

Characterization of cadmium accumulation and phytoextraction in three species of the genus Atriplex (canescens, halimus and nummularia) in the presence or absence of salt

This study aims to establish for the first time a comparison between the resistance to cadmium (Cd) stress of three halophyte species, Atriplex canescens, Atriplex halimus and Atriplex nummularia in addition to their already known tolerance for salt and drought. Plants were exposed to CdCl₂ (20 and 50 μM) in the presence or in the absence of salt (50 mM NaCl) for one and two months. The amount of accumulated Cd was determined in the roots and leaves as well as the amount excreted on the surface of the leaves. Physiological parameters such as chlorophyll content and stress biomarkers, including malondialdehyde and enzymatic activities, were then analyzed. The results show that these plants are able to neutralize the excess of reactive oxygen species resulting from treatments by activating the antioxidant defense mechanisms in order to restore the homeostasis of cells. All three species are also able to accumulate high amounts of Cd in the leaves (several hundred mg of Cd/kg of dry leaves) and this phenomenon is amplified in the presence of salt. All together our results allow to consider the three Atriplex species as hyperaccumulators in the presence/absence of salt and as good candidates in a strategy of Cd phytoextraction in the presence of low concentrations of the pollutant. Nevertheless, both A. canescens and A. nummularia species seem to have a higher capacity to hyper-accumulate Cd when the concentration of Cd reaches higher level of contamination.

Lipid monolayer as a simple model membrane for comparative assessment of the photodynamic therapy photosensitizer efficiency via macroscopic measurements

Cellular membrane is one of the main targets of photodynamic therapy. Its high complexity has led to the study of the efficiency of photosensitizers on artificial lipid systems mimicking membranes. However, the preliminary analysis of this efficiency remains limited due to difficulty of the model construction and/or implementation of the required measurement techniques. Hereby, we propose a quite simple way for the rapid comparative assessment of novel photosensitizers in terms of membrane photodegradation, based on simple and fast measurements, such as wetting angle and surface plasmon resonance spectroscopy. As a proof of concept, we applied this methodology to two bacteriopurpurinimide derivatives. We have shown in particular that such complementary techniques can be employed not only for the multiparametric monitoring of the kinetics of the photodegradation, but also for the comparison of the damaging efficiency of the photosensitizers in the lipid structures as well.

Detrimental impact of silica nanoparticles on the nanomechanical properties of Escherichia coli, studied by AFM

Despite great innovative and technological promises, nanoparticles (NPs) can ultimately exert an antibacterial activity by affecting the cell envelope integrity. This envelope, by conferring the cell its rigidity and protection, is intimately related to the mechanical behavior of the bacterial surface. Depending on their size, surface chemistry, shape, NPs can induce damages to the cell morphology and structure among others, and are therefore expected to alter the overall mechanical properties of bacteria. Although Atomic Force Microscopy (AFM) stands as a powerful tool to study biological systems, with high resolution and in near physiological environment, it has rarely been applied to investigate at the same time both morphological and mechanical degradations of bacteria upon NPs treatment. Consequently, this study aims at quantifying the impact of the silica NPs (SiO₂-NPs) on the mechanical properties of E. coli cells after their exposure, and relating it to their toxic activity under a critical diameter. Cell elasticity was calculated by fitting the force curves with the Hertz model, and was correlated with the morphological study. SiO₂-NPs of 100 nm diameter did not trigger any significant change in the Young modulus of E. coli, in agreement with the bacterial intact morphology and membrane structure. On the opposite, the 4 nm diameter SiO₂-NPs did induce a significant decrease in E. coli Young modulus, mainly associated with the disorganization of lipopolysaccharides in the outer membrane and the permeation of the underlying peptidoglycan layer. The subsequent toxic behavior of these NPs is finally confirmed by the presence of membrane residues, due to cell lysis, exhibiting typical adhesion features.

Hydrocalumite Thin Films for Polyphenol Biosensor Elaboration

Hybrid thin films based on Hydrocalumite (Ca₂AlCl layered double hydroxide LDH) and tyrosinaseenzyme have been used for the elaboration of a high sensitive amperometric biosensor detecting polyphenols extracted from green tea. Structural properties of LDH nanomaterials were characterized by X-ray powder diffraction and Infra-Red spectroscopy, confirming its crystalline phase and chemical composition. Ca₂AlCl-LDHs-thin films were deposited by spin-coating, and studied by atomic force microscopy to obtain information about the surface morphology of this host matrix before and after enzyme's immobilization. Electrochemical study using cyclic voltammetry and chronoamperometry shows good performances of the built-in biosensor with a high sensitivity for polyphenols concentrations ranging from 24 pM to and a limit of detection of 1.2 pM.

Influence of oxidized lipids on palmitoyl-oleoyl-phosphatidylcholine organization, contribution of Langmuir monolayers and Langmuir-Blodgett films

In this work, we studied the interaction of two oxidized lipids, PoxnoPC and PazePC, with POPC phospholipid. Mean molecular areas obtained from (π-A) isotherms of mixed PoxnoPC-POPC and PazePC-POPC monolayers revealed different behaviors of these two oxidized lipids: the presence of PoxnoPC in the monolayers induces their expansion, mean molecular areas being higher than those expected in the case of ideal mixtures. PazePC-POPC behave on the whole ideally. This difference can be explained by a different conformation of oxidized lipids. Moreover the carboxylic function of PazePC is protonated under our experimental conditions, as shown by (π-A) isotherms of PazePC at different pH values. Both oxidized lipids induce also an increase of the monolayer elasticity, PoxnoPC being slightly more efficient than PazePC. These monolayers were transferred from the air-water interface onto mica supports for a study by AFM. AFM images are on the whole homogenous, suggesting the presence of only one lipid phase in both cases. However, in the case of PazePC-POPC monolayers, AFM images show also the presence of areas thicker of 7nm to 10nm than the surrounding lipid phase, probably due to the local formation of multilayer systems induced by compression.

Hydrogenated and fluorinated surfactants derived from Tris(hydroxymethyl)-acrylamidomethane allow the purification of a highly active yeast F1-F0 ATP-synthase with an enhanced stability

Loss of stability and integrity of large membrane protein complexes as well as their aggregation in a non-lipidic environment are the major bottlenecks to their structural studies. We have tested C(12)H(25)-S-poly-Tris-(hydroxymethyl)acrylamidomethane (H(12)-TAC) among many other detergents for extracting the yeast F(1)F(0) ATP-synthase. H(12)-TAC was found to be a very efficient detergent for removing the enzyme from mitochondrial membranes without altering its sensitivity towards specific ATP-synthase inhibitors. This extracted enzyme was then solubilized by either dodecyl maltoside (DDM), H(12)-TAC or fluorinated surfactants such as C(2)H(5)-C(6)F(12)-C(2)H(4)-S-poly-Tris-(hydroxymethyl)acrylamidomethane (H(2)F(6)-TAC) or C(6)F(13)-C(2)H(4)-S-poly-Tris-(hydroxymethyl)acrylamidomethane (F(6)-TAC), two surfactants exhibiting a comparable polar head to H(12)-TAC but bearing a fluorinated hydrophobic tail. Preparations from enzymes purified in the presence of H(12)-TAC were found to be more adapted for AFM imaging than ATP-synthase purified with DDM. Keeping H(12)-TAC during the Ni-NTA IMAC purification step or replacing it by DDM at low concentrations did not however allow preserving enzyme activity, while fluorinated surfactants H(2)F(6)-TAC and F(6)-TAC were found to enhance enzyme stability and integrity as indicated by sensitivity towards inhibitors. ATPase specific activity was higher with F(6)-TAC than with H(2)F(6)-TAC. When enzymes were mixed with egg phosphatidylcholine, ATP-synthases purified in the presence of H(2)F(6)-TAC or F(6)-TAC were more stable upon time than the DDM purified enzyme. Furthermore, in the presence of lipids, an activation of ATP-synthases was observed that was transitory for enzymes purified with DDM, but lasted for weeks for ATP-synthases isolated in the presence of molecules with Tris polyalcoholic moieties. Relipidated enzymes prepared with fluorinated surfactants remained highly sensitive towards inhibitors, even after 6 weeks.

Oscillatory dissipation of a simple confined liquid

We present a sensitive measurement of the dissipation and the effective viscosity of a simple confined liquid (octamethylcyclotetrasiloxane) using an atomic force microscope. The experimental data show that the damping and the effective viscosity increase and present oscillations as the gap between the cantilever tip and the surface is diminished. To our knowledge, the damping and the viscosity modulation are reported here with such good accuracy for the first time. Such an experimental result is different from what has been reported earlier where only a continuous increase of the damping and the viscosity are observed.

Heterogeneous cell mechanical properties: an atomic force microscopy study

Atomic force microscopy (AFM) is a non-invasive microscopy to explore living biological systems like cells in liquid environment. Thus AFM is an appropriate tool to investigate surface chemical modification and its influence on biological systems. In particular, control over biomaterial surface chemistry can result in a regulated cell response. This report investigates the influence of adhesive and non-adhesive surfaces on the cell morphology and the influence of the cytoskeleton structure on the local mechanical properties. In this study, the main work concerns a thorough investigation of the height images obtained with an AFM as therecorded images provide the evolution of the mechanical properties of the cell as function of its local structure. Information on the cell elasticity due to the cytoskeleton organization is deduced when comparing the AFM tip indentation depth versus the distance between the cytoskeleton bundles for the different samples.

Characterization of dynamic cellular adhesion of osteoblasts using atomic force microscopy

BACKGROUND

Atomic force microscopy (AFM) can be used to visualize the cell morphology in an aqueous environment and in real time. It also allows the investigation of mechanical properties such as cell compliance as a function of cell attachment. This study characterized and evaluated osteoblast adhesion by AFM.

METHODS

Human bone marrow stromal cells were cultured on two types of surface to induce weak and strong cellular adhesions.

RESULTS

Cells were considered as spreading if they had a flattened and lengthened shape and a cytoskeletal organization in the submembrane cytosolic region. Cell detachment demonstrated different adhesion states between adherent cells to be distinguished. The stability of the cytoskeletal fibers indicated that cells were adherent. The elastic modulus was estimated by two complementary approaches. The values deduced were between 3 x 10(2) and 2 x 10(5) Nm(-2) according to the state of cell adhesion and the approaches used to measure this elastic modulus.

CONCLUSIONS

Although the results were qualitative, a relation may be deduced between the elasticity of living cells as demonstrated by cytoskeletal organization and the state of cell adhesion. The technique could be used to determine the adhesion state of an adherent osteoblast observed under AFM.

Study of Two Grafting Methods for Obtaining a 3-Aminopropyltriethoxysilane Monolayer on Silica Surface

In order to establish a 3-aminopropyltriethoxysilane (APTES) grafting procedure with limited number of APTESs noncovalently linked to the silica surface, two different methods of grafting (in acid-aqueous solution and in anhydrous solution) were compared. The grafted surface state was investigated by atomic force microscopy (AFM). The stability of the grafting was checked at different temperatures by AFM. Continuous and plane APTES grafted surfaces were successfully prepared using both grafting preparations. The grafting in an anhydrous solution behaves homogeneously and stably compared to the grafting in an acid-aqueous solution. Moreover, with anhydrous solution, results showed that a unique monolayer of APTES was grafted.