Photocatalytic abatement results from a model street canyon

During the European Life+ project PhotoPAQ (Demonstration of Photocatalytic remediation Processes on Air Quality), photocatalytic remediation of nitrogen oxides (NOx), ozone (O3), volatile organic compounds (VOCs), and airborne particles on photocatalytic cementitious coating materials was studied in an artificial street canyon setup by comparing with a colocated nonactive reference canyon of the same dimension (5 × 5 × 53 m). Although the photocatalytic material showed reasonably high activity in laboratory studies, no significant reduction of NOx, O3, and VOCs and no impact on particle mass, size distribution, and chemical composition were observed in the field campaign. When comparing nighttime and daytime correlation plots of the two canyons, an average upper limit NOx remediation of ≤2% was derived. This result is consistent only with three recent field studies on photocatalytic NOx remediation in the urban atmosphere, whereas much higher reductions were obtained in most other field investigations. Reasons for the controversial results are discussed, and a more consistent picture of the quantitative remediation is obtained after extrapolation of the results from the various field campaigns to realistic main urban street canyon conditions.

Construction of a photocatalytic de-polluting field site in the Leopold II tunnel in Brussels

Within the framework of the European Life+-funded project PhotoPAQ (Demonstration of Photocatalytic remediation Processes on Air Quality), which was aimed at demonstrating the effectiveness of photocatalytic coating materials on a realistic scale, a photocatalytic de-polluting field site was set up in the Leopold II tunnel in Brussels, Belgium. For that purpose, photocatalytic cementitious materials were applied on the side walls and ceiling of selected test sections inside a one-way tunnel tube. This article presents the configuration of the test sections used and the preparation and implementation of the measuring campaigns inside the Leopold II tunnel. While emphasizing on how to implement measuring campaigns under such conditions, difficulties encountered during these extensive field campaigns are presented and discussed. This included the severe de-activation observed for the investigated material under the polluted tunnel conditions, which was revealed by additional laboratory experiments on photocatalytic samples that were exposed to tunnel air. Finally, recommendations for future applications of photocatalytic building materials inside tunnels are given.

A tunable diode laser absorption spectrometer for formaldehyde atmospheric measurements validated by simulation chamber instrumentation

A tunable diode laser absorption spectrometer (TDLAS) for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer (FT-IR) in a simulation chamber. Formaldehyde was generated in situ in the chamber from reaction of ethene with ozone. Three HCHO ro-vibrational line intensities (at 2909.71, 2912.09 and 2914.46 cm(-1)) possibly used by TDLAS were calibrated by FT-IR spectra simultaneously recorded in the 1600-3200 cm(-1) domain during ethene ozonolysis, enabling the on-line deduction of the varying concentration for HCHO in formation. The experimental line intensities values inferred confirmed the calculated ones from the updated HITRAN database. In addition, the feasibility of stratospheric in situ HCHO measurements using the 2912.09 cm(-1) line was demonstrated. The TDLAS performances were also assessed, leading to a 2sigma detection limit of 88 ppt in volume mixing ratio with a response time of 60 sec at 30 Torr and 294 K for 112 m optical path. As part of this work, the room-temperature rate constant of this reaction and the HCHO formation yield were found to be in excellent agreement with the compiled literature data.