Synthesis of core-shell copper-graphite submicronic particles and carbon nano-onions by spark discharges in liquid hydrocarbons

Spark discharge in hydrocarbon liquids is considered a promising method for the synthesis of various nanomaterials, including nanocomposites. In this study, copper–carbon particles were synthesized by generating spark discharges between two Cu electrodes immersed in heptane, cyclohexane, or toluene. The synthesized particles were characterized using scanning electron microscopy, high-resolution transmission electron microscopy, and selected area electron diffraction. Overall, two families of particles were observed: Cu particles (diameter < 10 nm) embedded in a carbon matrix and submicrometric Cu particles encapsulated in a carbon shell. The obtained results indicate that the size distribution of the Cu nanoparticles and the degree of graphitization of the carbon matrix depend on the liquid. Indeed, discharges in heptane lead to Cu particles with diameters of 2–6 nm embedded in a carbon matrix of low graphitization degree, while discharges in toluene result in particles with diameters of 2–14 nm embedded in carbon matrix of high graphitization degree. Based on the obtained experimental results, it is proposed that the Cu nanoparticles are produced in the plasma core where Cu (evaporated from the electrode surface) and carbonaceous species (decomposition of the liquid) are present. When the plasma hits the electrode surface, hot (thousands of Kelvin) Cu particles are ejected from the electrode, and they propagate in the liquid. The propagation of the hot particles in the liquid results in the local evaporation of this liquid, which leads to the formation of a C-shell around each Cu particle. In few cases where the shape of the Cu particle is not spherical, carbon nanoonions are detected between the C-shell and the Cu core. These nanoonions are supposedly formed under the effect of the fluid vortices generated close to the particle surfaces when these latter are ejected into the liquid.

Preferential self-healing at grain boundaries in plasma-treated graphene

Engineering of defects located in grains or at grain boundaries is central to the development of functional materials. Although there is a surge of interest in the formation, migration and annihilation of defects during ion and plasma irradiation of bulk materials, these processes are rarely assessed in low-dimensional materials and remain mostly unexplored spectroscopically at the micrometre scale due to experimental limitations. Here, we use a hyperspectral Raman imaging scheme providing high selectivity and diffraction-limited spatial resolution to examine plasma-induced damage in a polycrystalline graphene film. Measurements conducted before and after very low-energy (11-13 eV) ion bombardment show defect generation in graphene grains following a zero-dimensional defect curve, whereas domain boundaries tend to develop as one-dimensional defects. Damage generation is slower at grain boundaries than within the grains, a behaviour ascribed to preferential self-healing. This evidence of local defect migration and structural recovery in graphene sheds light on the complexity of chemical and physical processes at the grain boundaries of two-dimensional materials.

Probing plasma-treated graphene using hyperspectral Raman

Raman spectroscopy provides rich optical signals that can be used, after data analysis, to assess if a graphene layer is pristine, doped, damaged, functionalized, or stressed. The area being probed by a conventional Raman spectrometer is, however, limited to the size of the laser beam (∼1 µm); hence, detailed mapping of inhomogeneities in a graphene sample requires slow and sequential acquisition of a Raman spectrum at each pixel. Studies of physical and chemical processes on polycrystalline and heterogeneous graphene films require more advanced hyperspectral Raman capable of fast imaging at a high spatial resolution over hundreds of microns. Here, we compare the capacity of two different Raman imaging schemes (scanning and global) to probe graphene films modified by a low-pressure plasma treatment and present an analysis method providing assessments of the surface properties at local defects, grain boundaries, and other heterogeneities. By comparing statistically initial and plasma-treated regions of graphene, we highlight the presence of inhomogeneities after plasma treatment linked to the initial state of the graphene surface. These results provided statistical results on the correlation between the graphene initial state and the corresponding graphene-plasma interaction. This work further demonstrates the potential use of global hyperspectral Raman imaging with advanced Raman spectra analysis to study graphene physics and chemistry on a scale of hundreds of microns.