Single-Molecule Discrimination of Saccharides Using Carbon Nitride Nanopores

Structural complexity brings a huge challenge to the analysis of sugar chains. As a single-molecule sensor, nanopores have the potential to provide fingerprint information on saccharides. Traditionally, direct single-molecule saccharide detection with nanopores is hampered by their small size and weak affinity. Here, a carbon nitride nanopore device is developed to discern two types of trisaccharide molecules (LeApN and SLeCpN) with minor structural differences. The resolution of LeApN and SLeCpN in the mixture reaches 0.98, which has never been achieved in solid-state nanopores so far. Monosaccharide (GlcNAcpN) and disaccharide (LacNAcpN) can also be discriminated using this system, indicating that the versatile carbon nitride nanopores possess a monosaccharide-level resolution. This study demonstrates that the carbon nitride nanopores have the potential for conducting structure analysis on single-molecule saccharides.

Surface-phonon-polariton-enhanced photoinduced dipole force for nanoscale infrared imaging

The photoinduced dipole force (PiDF) is an attractive force arising from the Coulombic interaction between the light-induced dipoles on the illuminated tip and the sample. It shows extreme sample-tip distance and refractive index dependence, which is promising for nanoscale infrared (IR) imaging of ultrathin samples. However, the existence of PiDF in the mid-IR region has not been experimentally demonstrated due to the coexistence of photoinduced thermal force (PiTF), typically one to two orders of magnitude higher than PiDF. In this study, we demonstrate that, with the assistance of surface phonon polaritons, the PiDF of c-quartz can be enhanced to surpass its PiTF, enabling a clear observation of PiDF spectra reflecting the properties of the real part of permittivity. Leveraging the detection of the PiDF of phonon polaritonic substrate, we propose a strategy to enhance the sensitivity and contrast of photoinduced force responses in transmission images, facilitating the precise differentiation of the heterogeneous distribution of ultrathin samples.

Synergistic Al-Al Dual-Atomic Site for Efficient Artificial Nitrogen Fixation

Synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) is a promising alternative to the Haber-Bosch process. However, it is commonly obstructed by the high activation energy. Here, we report the design and synthesis of an Al-Al bonded dual atomic catalyst stabilized within an amorphous nitrogen-doped porous carbon matrix (Al2NC) with high NRR performance. The dual atomic Al2-sites act synergistically to catalyze the complex multiple steps of NRR through adsorption and activation, enhancing the proton-coupled electron transfer. This Al2NC catalyst exhibits a high Faradaic efficiency of 16.56±0.3 % with a yield rate of 29.22±1.2 μg h-1 mgcat -1. The dual atomic Al2NC catalyst shows long-term repeatable, and stable NRR performance. This work presents an insight into the identification of synergistic dual atomic catalytic site and mechanistic pathway for the electrochemical conversion of N2 to NH3.

Molecular architectures of iron complexes for oxygen reduction catalysis-Activity enhancement by hydroxide ions coupling

Developing cost-effective and high-performance electrocatalysts for oxygen reduction reaction (ORR) is critical for clean energy generation. Here, we propose an approach to the synthesis of iron phthalocyanine nanotubes (FePc NTs) as a highly active and selective electrocatalyst for ORR. The performance is significantly superior to FePc in randomly aggregated and molecularly dispersed states, as well as the commercial Pt/C catalyst. When FePc NTs are anchored on graphene, the resulting architecture shifts the ORR potentials above the redox potentials of Fe2+/3+ sites. This does not obey the redox-mediated mechanism operative on conventional FePc with a Fe2+-N moiety serving as the active sites. Pourbaix analysis shows that the redox of Fe2+/3+ sites couples with HO- ions transfer, forming a HO-Fe3+-N moiety serving as the ORR active sites under the turnover condition. The chemisorption of ORR intermediates is appropriately weakened on the HO-Fe3+-N moiety compared to the Fe2+-N state and thus is intrinsically more ORR active.

Ultrasensitive Plasmon-Enhanced Infrared Spectroelectrochemistry

IR spectroelectrochemistry (EC-IR) is a cutting-edge operando method for exploring electrochemical reaction mechanisms. However, detection of interfacial molecules is challenged by the limited sensitivity of existing EC-IR platforms due to the lack of high-enhancement substrates. Here, we propose an innovative plasmon-enhanced infrared spectroelectrochemistry (EC-PEIRS) platform to overcome this sensitivity limitation. Plasmonic antennae with ultrahigh IR signal enhancement are electrically connected via monolayer graphene while preserving optical path integrity, serving as both the electrode and IR substrate. The [Fe(CN)6 ]3- /[Fe(CN)6 ]4- redox reaction and electrochemical CO2 reduction reaction (CO2 RR) are investigated on the EC-PEIRS platform with a remarkable signal enhancement. Notably, the enhanced IR signals enable a reconstruction of the electrochemical curve of the redox reactions and unveil the CO2 RR mechanism. This study presents a promising technique for boosting the in-depth understanding of interfacial events across diverse applications.

Regulating ion affinity and dehydration of metal-organic framework sub-nanochannels for high-precision ion separation

Membrane consisting of ordered sub-nanochannels has been pursued in ion separation technology to achieve applications including desalination, environment management, and energy conversion. However, high-precision ion separation has not yet been achieved owing to the lack of deep understanding of ion transport mechanism in confined environments. Biological ion channels can conduct ions with ultrahigh permeability and selectivity, which is inseparable from the important role of channel size and "ion-channel" interaction. Here, inspired by the biological systems, we report the high-precision separation of monovalent and divalent cations in functionalized metal-organic framework (MOF) membranes (UiO-66-(X)2, X = NH2, SH, OH and OCH3). We find that the functional group (X) and size of the MOF sub-nanochannel synergistically regulate the ion binding affinity and dehydration process, which is the key in enlarging the transport activation energy difference between target and interference ions to improve the separation performance. The K+/Mg2+ selectivity of the UiO-66-(OCH3)2 membrane reaches as high as 1567.8. This work provides a gateway to the understanding of ion transport mechanism and development of high-precision ion separation membranes.

Atomic Force Microscopy-Based Nanoscale Infrared Techniques for Catalysis

Atomic force microscopy (AFM)-based nanoscale infrared (nano-IR) techniques have found extensive application in the fields of chemistry, physics, and materials science, enabling the visualization of nanoscale features that surpass the optical diffraction limit. More recently, tentative investigations have been conducted into the use of these techniques in the field of catalysis, particularly in studying interfacial processes involving molecular monolayer samples. IR nanoimaging and nanospectroscopy offer unique perspectives on catalytic processes. Considering the specific characteristics of catalytic processes, this Perspective highlights the need for and reviews the current status of AFM-based nano-IR techniques for catalysis investigations, which aims to contribute to a deeper understanding of the nanoscale mechanisms underlying the catalytic processes.

Core-Shell Reactor Partitioning Enzyme and Prodrug by ZIF-8 for NADPH-Sensitive In Situ Prodrug Activation

Enzyme-prodrug therapies have shown unique advantages in efficiency, selectivity, and specificity of in vivo prodrug activation. However, precise spatiotemporal control of both the enzyme and its substrate at the target site, preservation of enzyme activity, and in situ substrate depletion due to low prodrug delivery efficiency continue to be great challenges. Here, we propose a novel core-shell reactor partitioning enzyme and prodrug by ZIF-8, which integrates an enzyme with its substrate and increases the drug loading capacity (DLC) using a prodrug as the building ligand to form a Zn-prodrug shell. Cytochrome P450 (CYP450) is immobilized in ZIF-8, and the antitumor drug dacarbazine (DTIC) is coordinated and deposited in its outer layer with a high DLC of 43.6±0.8 %. With this configuration, a much higher prodrug conversion efficiency of CYP450 (36.5±1.5 %) and lower IC50 value (26.3±2.6 μg/mL) are measured for B16-F10 cells with a higher NADPH concentration than those of L02 cells and HUVECs. With the tumor targeting ability of hyaluronic acid, this core-shell enzyme reactor shows a high tumor suppression rate of 96.6±1.9 % and provides a simple and versatile strategy for enabling in vivo biocatalysis to be more efficient, selective, and safer.

Unveiling the Solvent Effect in Plasmon Enhanced Electrochemistry via the Nanoparticle-Impact Technique

Plasmon-enhanced electrochemistry (PEEC) has been observed to facilitate energy conversion systems by converting light energy to chemical energy. However, comprehensively understanding the PEEC mechanism remains challenging due to the predominant use of ensemble-based methodologies on macroscopic electrodes, which fails to measure electron-transfer kinetics due to constraints from mass transport and the averaging effect. In this study, we have employed nanoparticle impact electrochemistry (NIE), a newly developed electroanalytical technique capable of measuring electrochemical dynamics at a single-nanoparticle level under optimal mass transport conditions, along with microscopic electron-transfer theory for data interpretation. By investigating the plasmon enhanced hydrogen evolution reaction (HER) at individual silver nanoparticles (AgNPs), we have clearly revealed the previously unknown influence of solvent effects within the PEEC mechanism. This finding suggests an additional approach to optimize plasmon-assisted electrocatalysis and electrosynthesis systems.

Homochiral Zeolitic Imidazolate Framework with Defined Chiral Microenvironment for Electrochemical Enantioselective Recognition

The recognition and separation of chiral molecules with similar structure are of great industrial and biological importance. Development of highly efficient chiral recognition systems is crucial for the precise application of these chiral molecules. Herein, a homochiral zeolitic imidazolate frameworks (c-ZIF) functionalized nanochannel device that exhibits an ideal platform for electrochemical enantioselective recognition is reported. Its distinct chiral binding cavity enables more sensitive discrimination of tryptophan (Trp) enantiomer pairs than other smaller chiral amino acids owing to its size matching to the target molecule. It is found that introducing neighboring aldehyde groups into the chiral cavity will result in an inferior chiral Trp recognition due to the decreased adsorption-energy difference of D- and L-Trp on the chiral sites. This study may provide an alternative strategy for designing efficient chiral recognition devices by utilizing the homochiral reticular materials and tailoring their chiral environments.

Ammonia-Induced Anomalous Ion Transport in Covalent Organic Framework Nanochannels

More anomalous transport behaviors have been observed with the rapid progress in nanofabrication technology and characterization tools. The ions/molecules inside nanochannels can act dramatically different from those in the bulk systems and exhibit novel mechanisms. Here, we have reported the fabrication of a nanodevice, covalent organic frameworks covered theta pipette (CTP), that combine the advantages of theta pipette (TP), nanochannels framework, and field-effect transistors (FETs) for controlling and modulating the anomalous transport. Our results show that ammonia, a weak base, causes a continuous supply of ions inside covalent organic framework (COF) nanochannels, leading to an abnormally high current depending on the ionic/molecular size and the pore size of the nanochannel. Furthermore, CTP can distinguish different concentrations of ammonia and have all of the qualities of a nanosensor.

Photoenhanced Electrocatalytic Hydrogen Evolution Accelerated Dominantly by the Hot Electrons from Intraband Transition rather than Interband Transition

Plasmonic materials enabling sunlight as an energy input to catalyze the hydrogen evolution reaction (HER) have become the research focus of artificial photosynthesis. Upon visible photoexcitation, there are both intraband transition and interband transition hot carriers generated, and which of them dominates the catalytic reaction remains elusive. Here, the contributions of hot electrons from intraband and interband transitions to the photoelectrocatalytic HER on plasmonic Au triangle nanoprisms (AuTNPs) have been studied. Compared with the dark reaction, the exchange current density increases by 9-fold and 3-fold under intraband and interband excitation, respectively, which is attributed to the higher energy level of intraband transition hot electrons. By calculation of the reaction activation energy with and without illumination, the contributions of the hot electrons from the two photoexcitation modes to the photoenhanced electroreduction reaction (PEER) are quantitatively analyzed, proposing the general standard to measure the effect of different hot electrons in different reactions.

Integrated separation and detection of exosomes via a label-free magnetic SERS platform

A label-free magnetic surface enhanced Raman scattering (SERS) platform was constructed, which was composed of superparamagnetic Fe₃O₄ nanoparticles as cores for separation and Au layers as shells for label-free SERS detection. Our method could effectively distinguish exosomes from different cell sources for cancer diagnosis and showed high sensitivity and specificity within a 95% confidence interval. As a low-cost and efficient exosome analysis method, the designed integrated platform for separation and detection has promising applicability in clinical diagnostics.

Design of Near-Infrared-Triggered Metallo-Photosensitizers via a Self-Assembly-Induced Vibronic Decoupling Strategy

Development of highly efficient near-infrared (NIR)-excited photosensitizers is hampered by the fast nonradiative vibrational relaxation process regulated by the energy gap law. Here, from the fundamental perspective we propose that the intermolecular coupling of well-designed photosensitizers has the potential to facilitate exciton delocalization and hence reduce the exciton-vibration coupling, thereby boosting their phototherapeutic efficacy via inhibition of the vibrational relaxation pathway. Such conceived NIR-excited metallo-photosensitizers (IrHA1 and IrHA2) were prepared and studied for experimental validation. The resulting iridium complexes exhibited a little singlet oxygen (¹O₂) production in the monomeric state, but produced substantially enhanced ¹O₂ generation efficiency via benefiting from the exciton-vibration decoupling in the self-assembly state. Particularly, IrHA2 exhibits an unprecedented high ¹O₂ quantum yield of 54.9% (FDA-approved NIR dye indocyanine green: Φ_Δ = 0.2%) under 808 nm laser irradiation with negligible heat generation, probably attributed to the suppression of vibronic couplings from the stretching mode of the acceptor ligand. In phototherapy, IrHA2-NPs with high biocompatibility and low dark toxicity can induce substantial tumor regression with 92.9% tumor volume reduction in vivo. This self-assembly-induced vibronic decoupling strategy would offer an effective approach to the design of high-performance NIR-excited photosensitizers.

Janus Metal-Organic Framework Membranes Boosting the Osmotic Energy Harvesting

The unique ion-transport properties in nanoconfined pores enable nanofluidic devices with great potential in harvesting osmotic energy. The energy conversion performance could be significantly improved by the precise regulation of the "permeability-selectivity" trade-off and the ion concentration polarization effect. Here, we take the advantage of electrodeposition technique to fabricate a Janus metal-organic framework (J-MOF) membrane that possesses rapid ion-transport capability and impeccable ion selectivity. The asymmetric structure and asymmetric surface charge distribution of the J-MOF device can suppress the ion concentration polarization effect and enhance the ion charge separation, exhibiting an improved energy harvesting performance. An output power density of 3.44 W/m² has been achieved with the J-MOF membrane at a 1000-fold concentration gradient. This work provides a new strategy for fabricating high-performance energy-harvesting devices.

Surface-Roughened SERS-Active Single Silver Nanowire for Simultaneous Detection of Intracellular and Extracellular pHs

The simultaneous and accurate detection of intracellular pH (pH_i) and extracellular pH (pH_e) is essential for studying the complex physiological activities of cancer cells and exploring pH-related therapeutic mechanisms. Here, we developed a super-long silver nanowire-based surface-enhanced Raman scattering (SERS) detection strategy for simultaneous sensing of pH_i and pH_e. A surface-roughened silver nanowire (AgNW) with a high aspect ratio is prepared at a nanoelectrode tip using a Cu-mediated oxidation process, which is then modified by pH-sensitive 4-mercaptobenzoic acid (4-MBA) to form 4-MBA@AgNW as a pH sensing probe. With the assistance of a 4D microcontroller, 4-MBA@AgNW is efficient in simultaneously detecting pH_i and pH_e in both 2D and 3D culture cancer cells by SERS, with minimal invasiveness, high sensitivity, and spatial resolution. Further investigation proves that the surface-roughened single AgNW can also be used in monitoring the dynamic variation of pH_i and pH_e of cancer cells upon stimulation with anticancer drugs or under a hypoxic environment.

Single-Molecule Electrical and Spectroscopic Profiling Protein Allostery Using a Gold Plasmonic Nanopore

Direct structural and dynamic characterization of protein conformers in solution is highly desirable but currently impractical. Herein, we developed a single molecule gold plasmonic nanopore system for observation of protein allostery, enabling us to monitor translocation dynamics and conformation transition of proteins by ion current detection and SERS spectrum measurement, respectively. Allosteric transition of calmodulin (CaM) was elaborately probed by the nanopore system. Two conformers of CaM were well-resolved at a single-molecule level using both the ion current blockage signal and the SERS spectra. The collected SERS spectra provided structural evidence to confirm the interaction between CaM and the gold plasmonic nanopore, which was responsible for the different translocation behaviors of the two conformers. SERS spectra revealed the amino acid residues involved in the conformational change of CaM upon calcium binding. The results demonstrated that the excellent spectral characterization furnishes a single-molecule nanopore technique with an advanced capability of direct structure analysis.

Single Molecule Protein Segments Sequencing by a Plasmonic Nanopore

Obtaining sequential and conformational information on proteins is vital to understand their functions. Although the nanopore-based electrical detection can sense single molecule (SM) protein and distinguish among different amino acids, this approach still faces difficulties in slowing down protein translocation and improving ionic current signal-to-noise ratio. Here, we observe the unfolding and multistep sequential translocation of SM cytochrome c (cyt c) through a surface enhanced Raman scattering (SERS) active conical gold nanopore. High bias voltage unfolds SM protein causing more exposure of amino acid residues to the nanopore, which slows down the protein translocation. Specific SERS traces of different SM cyt c segments are then recorded sequentially when they pass through the hotspot inside the gold nanopore. This study shows that the combination of SM SERS with a nanopore can provide a direct insight into protein segments and expedite the development of nanopore toward SM protein sequencing.

Ultrasensitive Multiplex Imaging of Cell Surface Proteins via Core-Shell Surface-Enhanced Raman Scattering Nanoprobes

Cell surface proteins, as important components of biological membranes, cover a wide range of important markers of diseases and even cancers. In this regard, precise detection of their expression levels is of crucial importance for both cancer diagnosis and the development of responsive therapeutic strategies. Herein, a size-controlled core-shell Au@ Copper(II) benzene-1,3,5-tricarboxylate (Au@Cu-BTC) nanomaterial was synthesized for specific and simultaneous imaging of multiple protein expression levels on cell membranes. The porous shell of Cu-BTC constructed on Au nanoparticles enabled effective loading of Raman reporter molecules, followed by further modification of the targeting moieties, which equipped the nanoprobe with good specificity and stability. Additionally, given the flexibility of the types of Raman reporter molecules available for loading, the nanoprobes were also demonstrated with good multichannel imaging capabilities. Ultimately, the present strategy of electromagnetic and chemical dual Raman scattering enhancement was successfully applied for the simultaneous detection of varied proteins on cell surfaces with high sensitivity and accuracy. The proposed nanomaterial holds promising applications in biosensing and therapeutic fields, which could not only provide a general strategy for the synthesis of metal-organic framework-based core-shell surface-enhanced Raman scattering nanoprobes but also enable further utilization in multitarget and multichannel cell imaging.

Closed Bipolar Electrode Array for Optical Reporting Reaction-Coupled Electrochemical Sensing and Imaging

This review centers on a closed bipolar electrode (BPE) array using an electro-fluorochromism (EFC) or electro-chemiluminescence (ECL) reaction as the reporting reaction. Electrochemical signals at one pole of the closed BPE array can be transduced into the EFC or ECL signals at the opposite pole. Therefore, the current signal of a redox reaction can be easily detected and imaged by monitoring the luminescence signal. Recent developments in closed BPE array-based EFC and ECL sensing and imaging are summarized and discussed in detail. Finally, we consider the challenges and opportunities for improving the spatial resolution of closed BPE array-based electrochemical imaging, and emphasize the important application of this technique to the imaging of cellular activities at the single-cell level.

Single-cell thermometry with a nanothermocouple probe

Herein, a nanopipette-based thermocouple probe that possesses high temperature resolution, rapid response, good reversibility and stability was constructed and successfully applied for single-cell temperature sensing. Different intracellular temperatures were observed in diverse types of cells, which reveals differences in their metabolism levels. Temperature responses of cancer and normal cells against various exogenous drugs were also demonstrated. The spatially resolved temperature sensing of three-dimensional cell culture models unveils the existence of their inner temperature gradients. This work would facilitate drug screening and disease diagnosis.

A Novel Indole Derivative with Superior Photophysical Performance for Fluorescent Probe, pH-Sensing, and Logic Gates

An indole-related molecules have been considered as the potential fluorescent probes for biological and electrochemical sensing. However, most of the indole probes have been usually used in a single detection mode. Indolium probes that enable accurate detection in complex environments are rarely reported. Here, four novel indole derivatives including the phenyl group substituted with different functional moieties were designed on the basis of the donor-π-acceptor (D-π-A) concept. These derivatives exhibit positive solvatochromism owing to their varied molecular conformations upon contacting to various solvents and the different HOMO-LUMO gaps caused by the difference in electronic push-pull capability of the substituents. Their solid-state fluorescence emissions and multiple chromisms are observed due to the inherent twisted geometries and aggregation modes. In addition, these derivatives show dramatic color and fluorescence responses due to the protonation of the nitrogen and oxygen containing groups, and thus novel colorimetric pH sensors, fluorescent papers and logic gates have been designed.

Super-Long SERS Active Single Silver Nanowires for Molecular Imaging in 2D and 3D Cell Culture Models

Establishing a systematic molecular information analysis strategy for cell culture models is of great significance for drug development and tissue engineering technologies. Here, we fabricated single silver nanowires with high surface-enhanced Raman scattering activity to extract SERS spectra in situ from two-dimensional (2D) and three-dimensional (3D) cell culture models. The silver nanowires were super long, flexible and thin enough to penetrate through multiple cells. A single silver nanowire was used in combination with a four-dimensional microcontroller as a cell endoscope for spectrally analyzing the components in cell culture models. Then, we adopted a machine learning algorithm to analyze the obtained spectra. Our results show that the abundance of proteins differs significantly between the 2D and 3D models, and that nucleic acid-rich and protein-rich regions can be distinguished with satisfactory accuracy.

Study on Ammonia Content and Distribution in the Microenvironment Based on Covalent Organic Framework Nanochannels

A crack-free micrometer-sized compact structure of 1,3,5-tris(4-aminophenyl)benzene-terephthaldehyde-covalent organic frameworks (TAPB-PDA-COFs) was constructed in situ at the tip of a theta micropipette (TMP). The COF-covered theta micropipette (CTP) then created a stable liquid-gas interface inside COF nanochannels, which was utilized to electrochemically analyze the content and distribution of ammonia gas in the microenvironments. The TMP-based electrochemical ammonia sensor (TEAS) shows a high sensing response, with current increasing linearly from 0 to 50,000 ppm ammonia, owing to the absorption of ammonia gas in the solvent meniscus that connects both barrels of the TEAS. The TEAS also exhibits a short response and recovery time of 5 ± 2 s and 6 ± 2 s, respectively. This response of the ammonia sensor is remarkably stable and repeatable, with a relative standard deviation of 6% for 500 ppm ammonia gas dispensing with humidity control. Due to its fast, reproducible, and stable response to ammonia gas, the TEAS was also utilized as a scanning electrochemical microscopy (SECM) probe for imaging the distribution of ammonia gas in a microspace. This study unlocks new possibilities for using a TMP in designing microscale probes for gas sensing and imaging.

High Spatial Resolution of Ultrathin Covalent Organic Framework Nanopores for Single-Molecule DNA Sensing

Ultrathin nanosheets of two-dimensional covalent organic frameworks covered a quartz nanopipette and then acted as a nanopore device for single-molecule DNA sensing. Our results showed that a single DNA homopolymer as short as 6 bases could be detected. The dwell times of 30-mer DNA homopolymers were obviously longer than the times of 10- or 6-mer ones. For different bases, poly(dA)₆ showed the slowest transport speed (∼595 μs/base) compared with cytosine (∼355 μs/base) in poly(dC)₆ and thymine (∼220 μs/base) in poly(dT)₆. Such translocation speeds are the slowest ever reported in two-dimensional material-based nanopores. Poly(dA)₆ also showed the biggest current blockade (94.74 pA) compared with poly(dC)₆ (79.54 pA) and poly(dT)₆ (71.41 pA). However, the present difference in blockade current was not big enough to distinguish the four DNA bases. Our study exhibits the shortest single DNA molecules that can be detected by COF nanopores at the present stage and lights the way for DNA sequencing based on solid-state nanopores.

Synergistic Effect of Electrostatic Interaction and Ionic Dehydration on Asymmetric Ion Transport in Nanochannel/Ion Channel Composite Membrane

Ion transport in nanochannels of a size comparable to that of hydrated ions exhibits unique properties due to the synergistic effect of various forces. Here, we design a nanochannel/ion channel composite (NIC) membrane that shows a high ion current rectification (ICR) ratio in different electrolytes. Experimental and theoretical results demonstrate that the synergistic effect of electrostatic interaction and ionic dehydration plays an important role in regulating the ICR behavior of the NIC membrane. We find that electrostatic attraction between ions and the channel surface in the ultraconfined space increases the probability of ionic dehydarion, resulting in different dehydration energy costs for different ions. This further alters the driving force for ion transport and thus regulates ICR of the NIC membrane. This work provides fundamental knowledge of ion transport in ion channels, which aids in the understanding of the function of biological systems and the design of high-performance nanochannel devices.

Light-Enhanced Osmotic Energy Harvester Using Photoactive Porphyrin Metal-Organic Framework Membranes

High ion selectivity and permeability, as two contradictory aspects for the membrane design, highly hamper the development of osmotic energy harvesting technologies. Metal-organic frameworks (MOFs) with ultra-small and high-density pores and functional surface groups show great promise in tackling these problems. Here, we propose a facile and mild cathodic deposition method to directly prepare crack-free porphyrin MOF membranes on a porous anodic aluminum oxide for osmotic energy harvesting. The abundant carboxyl groups of the functionalized porphyrin ligands together with the nanoporous structure endows the MOF membrane with high cation selectivity and ion permeability, thus a large output power density of 6.26 W m^-2 is achieved. The photoactive porphyrin ligands further lead to an improvement of the power density to 7.74 W m^-2 upon light irradiation. This work provides a promising strategy for the design of high-performance osmotic energy harvesting systems.

Synthesis of Pure Thiophene-Sulfur-Doped Graphene for an Oxygen Reduction Reaction with High Performance

Various S-bonding configurations existing in sulfur-doped reduced graphene oxide (S-rGO) show different electronic structures and physiochemical properties. Thus, understanding the properties of unique S-bonding configurations requires the construction of S-rGO with only single configuration. Here, we synthesized S-rGO with a pure thiophene-sulfur configuration through a simple and low-cost hydrothermal method by simply controlling the oxidation degree of the graphene oxide (GO) precursor. Through the use of a GO precursor with a high content of C-O groups, pure doping of the thiophene-sulfur configuration in the rGO can be achieved. Further electrochemical characterization reveals an increased electrocatalytic activity of the pure thiophene-sulfur-doped S-rGO in the oxygen reduction reaction, indicating the important role of thiophene-sulfur. The present work deepens the understanding of the functions of doped nonmetal elements in carbon materials in electrocatalysis and helps in the design of high performance electrocatalysts.

PNP Nanofluidic Transistor with Actively Tunable Current Response and Ionic Signal Amplification

Inspired by electronic transistors, electric field gating has been adopted to manipulate ionic currents of smart nanofluidic devices. Here, we report a PNP nanofluidic bipolar junction transistor (nBJT) consisting of one polyaniline (PANI) layer sandwiched between two polyethylene terephthalate (PET) nanoporous membranes. The PNP nBJT exhibits three different responses of currents (quasi-linear, rectification, and sigmoid) due to the counterbalance between surface charge distribution and base voltage applied in the nanofluidic channels; thus, they can be switched by base voltage. Four operating modes (cutoff, active, saturation, and breakdown mode) occur in the collector response currents. Under optimal conditions, the PNP nBJT exhibits an average current gain of up to 95 in 100 mM KCl solution at a low base voltage of 0.2 V. The present nBJT is promising for fabrication of nanofluidic devices with logical-control functions for analysis of single molecules.

In Situ Monitoring of DNA-Hg2+ Binding Reaction within Confined Nanospace of Metamaterial Nanochannel by Plasmon-Enhanced Raman Scattering

Nanochannel-based plasmon-enhanced Raman scattering (PERS) substrates can simulate biological environments, revealing the recognition and conformation information on biomolecules in confined spaces. In this work, a metamaterial nanochannel-based PERS platform was constructed for highly sensitive analysis of DNA recognition to Hg²⁺ with the lowest Hg²⁺ concentration down to 1.0 pM. The established platform enables in situ monitoring of the thermodynamics and kinetics of DNA-Hg²⁺ recognition reaction in a confined nanospace. The recognition reaction in a nanospace shows good reversibility and specificity, and the isotherm follows well the Freundlich adsorption model. Compared to its folding on a rough Au nanofilm, the folding time of ssDNA-Rox decorated in nanochannels is remarkably increased, and the folding process can be tuned through varying the pore size and ionic strength. The presented PERS platform is promising for studying biomolecule-ion binding events and biomolecule conformation change under nanochannel-confined conditions.

Single Molecule DNA Analysis Based on Atomic-Controllable Nanopores in Covalent Organic Frameworks

We explored the application of two-dimensional covalent organic frameworks (2D COFs) in single molecule DNA analysis. Two ultrathin COF nanosheets were exfoliated with pore sizes of 1.1 nm (COF-1.1) and 1.3 nm (COF-1.3) and covered closely on a quartz nanopipette with an orifice of 20 ± 5 nm. COF nanopores exhibited high size selectivity for fluorescent dyes and DNA molecules. The transport of long (calf thymus DNA) and short (DNA-80) DNA molecules through the COF nanopores was studied. Because of the strong interaction between DNA bases and the organic backbones of COFs, the DNA-80 was transported through the COF-1.1 nanopore at a speed of 270 μs/base, which is the slowest speed ever observed compared with 2D inorganic nanomaterials. This study shows that the COF nanosheet can work individually as a nanopore monomer with controllable pore size like its biological counterparts.

Morphologically Flex Sm-MOF Based Electrochemical Immunosensor for Ultrasensitive Detection of a Colon Cancer Biomarker

Despite having the potential to synthesize stable metal-organic frameworks (MOFs), rare earth metal-based MOFs have not been exploited extensively. Owing to the high coordination numbers, the MOFs can generate a suitable coordination environment for various applications. Herein, samarium (Sm)-based MOFs were synthesized with three different organic linkers, namely, trimesic acid (TMA), meso-tetra(4-carboxyphenyl)porphine (TCPP), and 1,3,6,8-tetra(4-carboxylphenyl) pyrene(TBPy) by the solvothermal approach. The morphologies of Sm-TMA MOF, Sm-TCPP MOF, Sm-TBPy MOF were rod-shaped, cubic consisting of stacked 2D layers, and spherical made of small cubic structures, respectively. After the electrochemical properties of the synthesized MOFs were investigated, the MOFs were used to fabricate immunosensors for detection of carcinoembryonic antigen using a label-free signaling strategy. The immunosensors exhibited a wide linear detection range and a lower detection limit. The exhibited reproducibility and selectivity of the immunosensors were within the tolerable limits. The established label-free immunosensor has been successfully applied for detection of carcinoembryonic antigen in human serum samples, demonstrating that the rare earth metal-based MOFs are promising for construction of biosensors for medical diagnosis.

Plasmon-Accelerated Generation of Singlet Oxygen on an Au/MoS2 Nanohybrid for Enhanced Photodynamic Killing of Bacterial Pathogens/Cancerous Cells

Benefiting from its strong cytotoxic features, singlet oxygen (¹O₂) has garnered considerable research attention in photodynamic therapy (PDT) and thus, plenty of inorganic PDT agents have been recently developed. However, inorganic PDT agents consisting of metal/semiconductor hybrids are surprisingly rare, bearing very low ¹O₂ quantum yield, and their in vivo PDT applications remain elusive. Herein, we provide an unprecedented report that the Au/MoS₂ hybrid under plasmon resonant excitation can sensitize ¹O₂ generation with a quantum yield of about 0.22, which is much higher than that of the reported hybrid-based photosensitizers (PSs). This significant enhancement in ¹O₂ quantum yield is attributed to the hot-electron injection from plasmonic AuNPs to MoS₂ NSs due to the matched energy levels. Electron paramagnetic resonance (EPR) spectroscopy with spin trapping and spin labeling verifies the plasmonic generation of hot charge carriers and reactive oxygen species such as superoxide and ¹O₂. This plasmonic PDT agent shows a remarkable photodynamic bacterial inactivation in vitro and anti-cancer therapeutic ability both in vitro and in vivo, which is solely attributed to high ¹O₂ generation rather than the plasmonic photothermal effect. Hence, plasmonic Au/MoS₂ with enhanced ¹O₂ quantum yield and appreciable in vivo cancer plasmonic PDT performance holds great promise as an inorganic PS to treat near-surface tumors. As a first demonstration of how metal localized surface plasmon resonance could enhance ¹O₂ generation, the present study opens up promising opportunities for enhancing ¹O₂ quantum yield of hybrid-based PSs, leading to achieving a high therapeutic index in plasmon PDT.

Plasmonic Nanozymes: Localized Surface Plasmonic Resonance Regulates Reaction Kinetics and Antibacterial Performance

Among the members of the rapidly growing nanozyme family, plasmonic nanozymes stand out because of their unique localized surface plasmon resonance (LSPR) characteristics and tunable catalytic activity. We prepared a plasmonic nanozyme of Au gold nanoparticles (AuNPs) and Cu metal-organic framework nanosheets (Cu-MOFNs). The Cu-MOFNs have peroxidase-like activity, while AuNPs present unique LSPR characteristics. We found that the as-prepared AuNPs/Cu-MOFNs composite presents 1.6-fold faster reaction kinetics under LSPR excitation compared to that in the dark. Investigations of energy levels, radical capture, and dark-field scattering spectroscopy revealed that LSPR of AuNPs as well as matched energy levels can facilitate efficient hot electron transfer, which could readily cleave the chemical bond of the substrate and accelerate the reaction kinetics. On the basis of these results, we achieved enhanced antibacterial therapy and wound healing using plasmonic AuNPs/Cu-MOFNs. This study spotlights the superiority of plasmonic nanozymes in improving the enzyme-like performance of nanozymes.

Enhanced Electrochemistry of Single Plasmonic Nanoparticles

The structure-function relationship of plasmon enhanced electrochemistry (PEEC) is of great importance for the design of efficient PEEC catalyst, but is rarely investigated at single nanoparticle level for the lack of efficient nanoscale methodology. Herein, we report the utilization of nanoparticle impact electrochemistry to allow single nanoparticle PEEC, where the effect of incident light on the plasmonic Ag/Au nanoparticles for accelerating Co-MOFNs catalyzed hydrogen evolution reaction (HER) is systematically explored. It is found that the plasmon excited hot carrier injection can lower the reaction activation energy, resulting in a much promoted reaction probability and the integral charge generated from individual collisions. Besides, a plasmonic nanoparticle filtering method is established to effectively distinguish different plasmonic nanoparticles. This work provides a unique view in understanding the intrinsic physicochemical properties for PEEC at the nano-confined domains.

Label-Free Electrochemiluminescence Imaging of Single-Cell Adhesions by Using Bipolar Nanoelectrode Array

A label-free and fast approach for positive electrochemiluminescence (ECL) imaging of single cells by bipolar nanoelectrode array is proposed. The reduction of oxygen at a platinized gold nanoelectrode array in a closed bipolar electrochemical system is coupled with an oxidative ECL process at the anodic side. For elevating the ECL imaging contrast of single cells, a driving voltage of -2.0 V is applied to in situ generate oxygen confined beneath cells that is subsequently used for ECL imaging at 1.1 V. High oxygen concentration in the confined space resulting from steric hindrance generates prominent oxygen reduction current at the cathodic side and higher ECL intensity at the anodic side, allowing positive ECL imaging of the cells adhesion region with excellent contrast. Cell morphology and adhesion strength can be successfully imaged with high image acquisition rate. This approach opens a new avenue for label-free imaging of single cells.

Revealing the Hydrogen Bonding Interaction of DNA with Unnatural Bases via Plasmonic Antenna Enhanced Infrared Spectroscopy

The incorporation of unnatural bases in DNA programming can break through the limits of Watson-Crick and Hoogsteen base pairing to expand the diversity of DNA structures. Thus, understanding the interaction between DNA and unnatural bases is of great importance in DNA nanotechnology. Here, we propose an approach of plasmonic antenna enhanced infrared spectroscopy to study the hydrogen bonding interaction between poly(thymine) DNA (poly T DNA) and melamine. The formation of multiple hydrogen bonds between melamine and thymine of poly T DNA is revealed by the appearance of a new infrared (IR) feature of the NH₂ deformation vibration at 1680 cm^-1. The binding rate constant (k_b) and the dissociation rate constant (k_d) of the affinity reaction reach 39.70 M^-1·s^-1 and 4.49 × 10^-5 s^-1, respectively. This work offers a valuable IR technique to study DNA nanostructures at the molecular level, providing unique physicochemical views of the interaction mechanism between DNA and unnatural bases in DNA programming.

Thermally Driven Transformation of Water Clustering Structures at Self-Assembled Monolayers

Water clustering structures are considered to play key roles in various temperature-dependent life activities. However, our fundamental understanding of the temperature-dependent water structures remains murky because of the limits of the real-time and real-condition monitoring techniques at the molecular level. We propose an in situ ATR-IR approach combining Gaussian fitting to qualitatively and quantitatively explore the temperature-dependent structural stability and transformation of the three water components, multimer water (MW), intermediate water (IW), and network water (NW), on interfaces with different wettabilities. Our results show that the transformation between NW and IW/MW will occur with a change in temperature. This conversion process shows reversibility on hydrophilic Au NPs film/ZnSe, while it is irreversible on a hydrophobic mercaptohexane self-assembled monolayer due to the irreversibility of the monolayer structure and the hydrophobic confinement effect. The established approach enables us to explore the change in the water properties at any interfaces upon external stimuli.