Evaluation of Compton gamma camera prototype based on pixelated CdTe detectors

A proposed Compton camera prototype based on pixelated CdTe is simulated and evaluated in order to establish its feasibility and expected performance in real laboratory tests. The system is based on module units containing a 2×4 array of square CdTe detectors of 10×10 mm² area and 2 mm thickness. The detectors are pixelated and stacked forming a 3D detector with voxel sizes of 2 × 1 × 2 mm³. The camera performance is simulated with Geant4-based Architecture for Medicine-Oriented Simulations(GAMOS) and the Origin Ensemble(OE) algorithm is used for the image reconstruction. The simulation shows that the camera can operate with up to 10⁴ Bq source activities with equal efficiency and is completely saturated at 10⁹ Bq. The efficiency of the system is evaluated using a simulated ¹⁸F point source phantom in the center of the Field-of-View (FOV) achieving an intrinsic efficiency of 0.4 counts per second per kilobecquerel. The spatial resolution measured from the point spread function (PSF) shows a FWHM of 1.5 mm along the direction perpendicular to the scatterer, making it possible to distinguish two points at 3 mm separation with a peak-to-valley ratio of 8.

Evaluation of Origin Ensemble algorithm for image reconstruction for pixelated solid-state detectors with large number of channels

The Voxel Imaging PET (VIP) Pathfinder project intends to show the advantages of using pixelated solid-state technology for nuclear medicine applications. It proposes designs for Positron Emission Tomography (PET), Positron Emission Mammography (PEM) and Compton gamma camera detectors with a large number of signal channels (of the order of 106). For PET scanners, conventional algorithms like Filtered Back-Projection (FBP) and Ordered Subset Expectation Maximization (OSEM) are straightforward to use and give good results. However, FBP presents difficulties for detectors with limited angular coverage like PEM and Compton gamma cameras, whereas OSEM has an impractically large time and memory consumption for a Compton gamma camera with a large number of channels. In this article, the Origin Ensemble (OE) algorithm is evaluated as an alternative algorithm for image reconstruction. Monte Carlo simulations of the PET design are used to compare the performance of OE, FBP and OSEM in terms of the bias, variance and average mean squared error (MSE) image quality metrics. For the PEM and Compton camera designs, results obtained with OE are presented.

Energy and coincidence time resolution measurements of CdTe detectors for PET

We report on the characterization of 2 mm thick CdTe diode detector with Schottky contacts to be employed in a novel conceptual design of PET scanner. Results at -8°C with an applied bias voltage of -1000 V/mm show a 1.2% FWHM energy resolution at 511 keV. Coincidence time resolution has been measured by triggering on the preamplifier output signal to improve the timing resolution of the detector. Results at the same bias and temperature conditions show a FWHM of 6 ns with a minimum acceptance energy of 500 keV. These results show that pixelated CdTe Schottky diode is an excellent candidate for the development of next generation nuclear medical imaging devices such as PET, Compton gamma cameras, and especially PET-MRI hybrid systems when used in a magnetic field immune configuration.

Pixelated CdTe detectors to overcome intrinsic limitations of crystal based positron emission mammographs

A positron emission mammograph (PEM) is an organ dedicated positron emission tomography (PET) scanner for breast cancer detection. State-of-the-art PEMs employing scintillating crystals as detection medium can provide metabolic images of the breast with significantly higher sensitivity and specificity with respect to standard whole body PET scanners. Over the past few years, crystal PEMs have dramatically increased their importance in the diagnosis and treatment of early stage breast cancer. Nevertheless, designs based on scintillators are characterized by an intrinsic deficiency of the depth of interaction (DOI) information from relatively thick crystals constraining the size of the smallest detectable tumor. This work shows how to overcome such intrinsic limitation by substituting scintillating crystals with pixelated CdTe detectors. The proposed novel design is developed within the Voxel Imaging PET (VIP) Pathfinder project and evaluated via Monte Carlo simulation. The volumetric spatial resolution of the VIP-PEM is expected to be up to 6 times better than standard commercial devices with a point spread function of 1 mm full width at half maximum (FWHM) in all directions. Pixelated CdTe detectors can also provide an energy resolution as low as 1.5% FWHM at 511 keV for a virtually pure signal with negligible contribution from scattered events.

Bacterial sulfate production by biodesulfurization of aromatic hydrocarbons, determined by ion chromatography

The use of bacteria to remove sulfur from crude oil or petroleum distillates is a novel concept that presents an alternative biotechnology to the current technology of hydrodesulfurization (HDS). Sulfur must be removed from crude oils prior use. The burning of fossil fuels containing sulfur releases sulfur dioxide into the atmosphere causing acid rain. The aim of this work is to determine the sulfate concentration by ion chromatography (IC), and calculate the percentage of transformation of organic bound sulfur, that is converted to sulfate, and estimate the efficiency of bacteria in desulfurization. IC is a suitable method for sulfate concentration determination. However, when chloride concentrations are significantly high, interference of the sulfate signal does occur. In this case, it could be avoided by diluting samples. A Dionex Model 2000i/SP IC system, with an anionic pre-column (Dionex AG4A), an anion separator column (Dionex AS4A), a suppressor column (Dionex AMMS-II), and a conductivity detector was used. The eluent (21 mM NaOH) and regenerant (electrolyzed 18 M omega/cm water) flow-rates were 1.0 and 2.0 ml/min, respectively. The sample loop volume was 10 microliters and the conductivity sensitivity was 30 muS. The diluted samples were filtered through a 0.45-micron filter before injection. The highest sulfate concentration detected was 24.10 mg/l, corresponding to a maximal conversion rate of 10% in a month. Sulfate ions were not detected in control samples. The correlation coefficient for a linear least squares fit was 0.99 (p < 0.001). The minimal concentration that we can read was 0.02 mg/l and this concentration corresponded to the limit of detection obtained under the conditions employed in this study. IC is an economical, sensitive and accurate way to estimate the sulfate concentrations in microbiological samples.