One-step and room-temperature fabrication of carbon nanocomposites including Ni nanoparticles for supercapacitor electrodes

With the increasing importance of power storage devices, demand for the development of supercapacitors possessing both rapid reversible chargeability and high energy density is accelerating. Here we propose a simple process for the room temperature fabrication of pseudocapacitor electrodes consisting of a faradaic redox reaction layer on a metallic electrode with an enhanced surface area. As a model metallic electrode, an Au foil was irradiated with Ar⁺ ions with a simultaneous supply of C and Ni at room temperature, resulting in fine metallic Ni nanoparticles dispersed in the carbon matrix with local graphitization on the ion-induced roughened Au surface. A carbon layer including fine Ni nanoparticles acted as an excellent faradaic redox reaction layer and the roughened surface contributed to an increase in surface area. The fabricated electrode, which included only 14 μg cm⁻² of Ni, showed a stored charge ability three times as large as that of the bulky Ni foil. Thus, it is believed that a carbon layer including Ni nanoparticles fabricated on the charge collective electrode with an ion-irradiation method is promising for the development of supercapacitors from the viewpoints of the reduced use of rare metal and excellent supercapacitor performance.

The charge collective electrode with faradaic redox reactor consisting of carbon nanocomposite including Ni nanoparticles is promising for the supercapacitor electrode.

Effects of Sintering Temperature Variation on Synthesis of Glass-Ceramic Phosphor Using Rice Husk Ash as Silica Source

In this study, the authors attempted to propose the very first study on fabrication and characterization of zinc-boro-silicate (ZBS) glass-ceramics derived from the ternary zinc-boro-silicate (ZnO)_0.65(B₂O₃)_0.15(RHA)_0.2 glass system through a conventional melt-quenching method by incorporating rice husk ash (RHA) as the silica (SiO₂) source, followed by a sintering process. Optimization of sintering condition has densified the sintered samples while embedded beta willemite (β-Zn₂SiO₄) and alpha willemite (α-Zn₂SiO₄) were proven in X-ray diffraction (XRD) analysis. Field emission scanning electron microscopy (FESEM) has shown the distribution of willemite crystals in rhombohedral shape crystals and successfully form closely-packed grains due to intense crystallization. The photoluminescence (PL) spectra of all sintered ZBS glasses presented various emission peaks at 425, 463, 487, 531, and 643 nm corresponded to violet, blue, green, and red emission, respectively. The correlation between the densification, phase transformation, microstructure, and photoluminescence of Zn₂SiO₄ glass-ceramic phosphor is discussed in detail.

Preparation and Characterization of Semi-Flexible Substrates from Natural Fiber/Nickel Oxide/Polycaprolactone Composite for Microstrip Patch Antenna Circuitries for Microwave Applications

The study intended to utilizing waste organic fiber for low-cost semi-flexible substrate fabrication to develop microstrip patch antennas for low band communication applications. All the semi-flexible substrates (12.2 wt. % OPEFF/87.8 wt. % PCL, 12.2 wt. % NiO/87.8 wt. % PCL, and 25 wt. % OPEFF/25 wt. % NiO/50 wt. % PCL) were fabricated by oil palm empty fruit fiber (OPEFF) mixed with nickel oxide (NiO) nanoparticles reinforced with polycaprolactone (PCL) as a matrix using a Thermo Haake blending machine. The morphology and crystalized structure of the substrates were tested using Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (X-RD) technique, and scanning electron microscopy (SEM), respectively. The thermal stability behavior of the substrates was analyzed using thermogravimetric analysis (TGA) and differential thermogravimetric (DTG) thermogram. The dielectric properties were characterized by an open-ended coaxial probe (OEC) connected with Agilent N5230A PNA-L Network Analyzer included the 85070E2 dielectric software at frequency range of 8 to 12 GHz. The experimental results showed that NiO/OPEFF/PCL composites exhibit controllable permittivity dielectric constant εr′(f) between 1.89 and 4.2 (Farad/meter, (F/m)), with loss factor εr′′(f) between 0.08 and 0.62 F/m, and loss tangent (tan δ) between 0.05 and 0.18. Return losses measurement of the three patch antennas OPEFF/PCL, NiO/PCL, and OPEFF/NiO/PCL are −11.93, −14.2 and −16.3 dB respectively. Finally, the commercial software package, Computer Simulation Technology Microwave Studio (CSTMWS), was used to investigate the antenna performance by simulate S-parameters based on the measured dielectric parameters. A negligible difference is found between the measured and simulated results. Finally, the results obtained encourage the possibility of using natural fibers and nickel oxide in preparation of the substrates utilize at microwave applications.

A preliminary study of thermal comfort and lighting in IHL library building

IHL (Institute of Higher Learning) library building is greatly utilized to access information from IT connection and materials. This building as a place to study, reading and writing for students and academics in the university. However, the indoor air quality and lighting system in the library building is not comfort and not satisfactory. In this paper, the investigation of thermal comfort and lighting in IHL library buildings. The library building of LBA, LBB and LBC has been selected. This study has been done with distribution of 350 set of questionnaires. The result shows that 63% of respondents claimed that uncomfortable with the environment because is very cold, which is indoor temperature in average of 20ºC. Meanwhile, 54.3% of respondents are unsatisfied with lighting level because it is too dimmed and most of them prefer to study near the window because of daylight. By lux meter reading, the illumination in average of 225 lux. From the reading, recommendations were made in order to enhance the thermal comfort and potential energy saving.

Development of a predictive model for estimating the specific heat capacity of metallic oxides/ethylene glycol-based nanofluids using support vector regression

The specific heat capacity of nanofluids ( C P n f ) is a fundamental thermophysical property that measures the heat storage capacity of the nanofluids.C P n f is usually determined through experimental measurement. As it is known, experimental procedures are characterised with some complexities, which include, the challenge of preparing stable nanofluids and relatively long periods to conduct experiments. So far, two correlations have been developed to estimate theC P n f . The accuracies of these models are still subject to further improvement for many nanofluid compositions. This study presents a four-input support vector regression (SVR) model hybridized with a Bayesian algorithm to predict the specific heat capacity of metallic oxides/ethylene glycol-based nanofluids. The bayesian algorithm was used to obtain the optimum SVR hyperparameters. 189 experimental data collected from published literature was used for the model development. The proposed model exhibits low average absolute relative deviation (AARD) and a high correlation coefficient (r) of 0.40 and 99.53 %, respectively. In addition, we analysed the accuracies of the existing analytical models on the considered nanofluid compositions. The model based on the thermal equilibrium between the nanoparticles and base fluid (model II) show good agreement with experimental results while the model based on simple mixing rule (model I) overestimated the specific heat capacity of the nanofluids. To further validate the superiority of the proposed technique over the existing analytical models, we compared various statistical errors for the three models. The AARD for the BSVR, model II, and model I are 0.40, 0.82 and 4.97, respectively. This clearly shows that the model developed has much better prediction accuracy than existing models in predicting the specific heat capacity of metallic oxides/ethylene glycol-based nanofluids. We believe the presented model will be important in the design of nanofluid-based applications due to its improved accuracy.

Effects of Calcination Holding Time on Properties of Wide Band Gap Willemite Semiconductor Nanoparticles by the Polymer Thermal Treatment Method

Willemite is a wide band gap semiconductor used in modern day technology for optoelectronics application. In this study, a new simple technique with less energy consumption is proposed. Willemite nanoparticles (NPs) were produced via a water-based solution consisting of a metallic precursor, polyvinylpyrrolidone (PVP), and underwent a calcination process at 900 °C for several holding times between 1-4 h. The FT-IR and Raman spectra indicated the presence of metal oxide bands as well as the effective removal of PVP. The degree of the crystallization and formation of the NPs were determined by XRD. The mean crystallite size of the NPs was between 18.23-27.40 nm. The morphology, particle shape and size distribution were viewed with HR-TEM and FESEM analysis. The willemite NPs aggregate from the smaller to larger particles with an increase in calcination holding time from 1-4 h with the sizes ranging between 19.74-29.71 nm. The energy values obtained from the experimental band gap decreased with increasing the holding time over the range of 5.39 eV at 1 h to at 5.27 at 4 h. These values match well with band gap obtained from the Mott and Davis model for direct transition. The findings in this study are very promising and can justify the use of these novel materials as a potential candidate for green luminescent optoelectronic applications.

Conventional versus Doxorubicin-Eluting Beads Transarterial Chemoembolization for Unresectable Hepatocellular Carcinoma: a Tertiary Medical Centre Experience in Malaysia

BACKGROUND

Hepatocellular carcinoma (HCC) is a common cancer that is frequently diagnosed at an advanced stage. Transarterial chemoembolisation (TACE) is an effective palliative treatment for patients who are not eligible for curative treatment. The two main methods for performing TACE are conventional (c-TACE) or with drug eluting beads (DEB-TACE). We sought to compare survival rates and tumour response between patients undergoing c-TACE and DEB-TACE at our centre.

MATERIALS AND METHODS

A retrospective cohort study of patients undergoing either treatment was carried out from January 2009 to December 2014. Tumour response to the procedures was evaluated according to the modified Response Evaluation Criteria in Solid Tumors (mRECIST). Kaplan-Meier analysis was used to assess and compare the overall survival in the two groups.

RESULTS

A total of 79 patients were analysed (34 had c-TACE, 45 had DEB-TACE) with a median follow-up of 11.8 months. A total of 20 patients in the c-TACE group (80%) and 12 patients in the DEB-TACE group (44%) died during the follow up period. The median survival durations in the c-TACE and DEB-TACE groups were 4.9 ± 3.2 months and 8.3 ± 2.0 months respectively (p=0.008). There was no statistically significant difference noted among the two groups with respect to mRECIST criteria.

CONCLUSIONS

DEB-TACE demonstrated a significant improvement in overall survival rates for patients with unresectable HCC when compared to c-TACE. It is a safe and promising approach and should potentially be considered as a standard of care in the management of unresectable HCC.

In situ fabrication of graphene from a copper–carbon nanoneedle and its electrical properties

Herein, we present a direct observation of the formation of graphene from a single copper–carbon nanoneedle (Cu–CNN) during the measurement of current–voltage (I–V) and direct heating via in situ transmission electron microscopy (TEM).

In situ transmission electron microscopy of Ag-incorporated carbon nanofibers: the effect of Ag nanoparticle size on graphene formation

We have studied graphene formation from a single Ag-incorporated carbon nanofiber (CNF) during electron emission using in situ transmission electron microscopy.

Visualizing copper assisted graphene growth in nanoscale

Control synthesis of high quality large-area graphene on transition metals (TMs) by chemical vapor deposition (CVD) is the most fascinating approach for practical device applications. Interaction of carbon atoms and TMs is quite critical to obtain graphene with precise layer number, crystal size and structure. Here, we reveal a solid phase reaction process to achieve Cu assisted graphene growth in nanoscale by in-situ transmission electron microscope (TEM). Significant structural transformation of amorphous carbon nanofiber (CNF) coated with Cu is observed with an applied potential in a two probe system. The coated Cu particle recrystallize and agglomerate toward the cathode with applied potential due to joule heating and large thermal gradient. Consequently, the amorphous carbon start crystallizing and forming sp² hybridized carbon to form graphene sheet from the tip of Cu surface. We observed structural deformation and breaking of the graphene nanoribbon with a higher applied potential, attributing to saturated current flow and induced Joule heating. The observed graphene formation in nanoscale by the in-situ TEM process can be significant to understand carbon atoms and Cu interaction.

In situ TEM observation of Fe-included carbon nanofiber: evolution of structural and electrical properties in field emission process

In situ transmission electron microscopy (TEM) of single Fe-included carbon nanofibers (CNFs) revealed that the fine polycrystalline structure in the shank region of CNFs transformed to graphitic, hollow structures during a field emission (FE) process. The iron metal platelets agglomerated during the FE process and perceptibly were emitted from the shank, which featured bamboo-like carbon nanotube (CNT) structures. The structural evolution also improved the electrical properties, and the FE current was remarkably increased, that is, 1000 times higher than the initial value (from 10(-9) to 10(-6) A). The structural transformations were effectuated by Joule heating that generated simultaneously during the FE process. The in situ TEM study of room-temperature-synthesized CNFs could provide essential information regarding CNFs' structural transformation for their possible application in future electron emitter sources.