Purification and characterization of L-arginine deiminase from Penicillium chrysogenum

L-arginine deiminase (ADI, EC 3.5.3.6) hydrolyzes arginine to ammonia and citrulline which is a natural supplement in health care. ADI was purified from Penicillium chrysogenum using 85% ammonium sulfate, DEAE-cellulose and Sephadex G200. ADI was purified 17.2-fold and 4.6% yield with a specific activity of 50 Umg- 1 protein. The molecular weight was 49 kDa. ADI expressed maximum activity at 40oC and an optimum pH of 6.0. ADI thermostability was investigated and the values of both t0.5 and D were determined. Kd increased by temperature and the Z value was 38oC. ATP, ADP and AMP activated ADI up to 0.6 mM. Cysteine and dithiothreitol activated ADI up to 60 µmol whereas the activation by thioglycolate and reduced glutathione (GSH) prolonged to 80 µmol. EDTA, α,α-dipyridyl, and o-phenanthroline inactivated ADI indicating that ADI is a metalloenzyme. N-ethylmaleimide (NEM), N-bromosuccinimide (NBS), butanedione (BD), dansyl chloride (DC), diethylpyrocarbonate (DEPC) and N-acetyl-imidazole (NAI) inhibited ADI activity indicating the necessity of sulfhydryl, tryptophanyl, arginyl, lysyl, histidyl and tyrosyl groups, respectively for ADI catalysis. The obtained results show that ADI from P. chrysogenum could be a potential candidate for industrial and biotechnological applications.

The influence of organic components in sludge on selective non-catalytic reduction denitrification

Collaborative disposal of sludge has been applied extensively in cement industry kilns, but the influence of organic components in sludge on the selective non-catalytic reduction (SNCR) denitrification is still in highly demanding. This paper focuses the influence of ethanol, n-octane, benzene, and acetone on the SNCR denitrification, and the influence of ethanol are analyzed on SNCR denitrification under different flue gas condition. The result showed that the presence of organic components reduces the reaction temperature of SNCR. When the temperature of SNCR reaction is at 750 ~ 800 ℃, the denitrification rate of four organic components is ethanol > benzene > n-octane > acetone. The optimum denitrification rate on SNCR can reach as high as 90.377% when the reaction condition is the NH3/NO is 1; the ethanol concentration is 1000 ppm; O2 concentration is 2%; and temperature is 750 ℃. The presence of carbon dioxide inhibits the denitrification reaction. With the increase of temperature, the influence of SO2 on the denitrification reaction first increases and then decreases. In this paper, the influence of organic components in sludge on SNCR denitrification will be analyzed, which provides a theoretical basis for the selection of sludge dosing method for cement kiln collaborative disposal.

Decoration of sodium carboxymethylcellulose gel microspheres with modified lignin to enhanced methylene blue removal

The introduction of active groups from biomass is currently the most promising alternative method for increasing the adsorption effect of dyes. In this study, modified aminated lignin (MAL) rich in phenolic hydroxyl and amine groups was prepared by amination and catalytic grafting. The factors influencing the modification conditions of the content of amine and phenolic hydroxyl groups were explored. Chemical structural analysis results confirmed that MAL was successfully prepared using a two-step method. The content of phenolic hydroxyl groups in MAL significantly increased to 1.46 mmol/g. MAL/sodium carboxymethylcellulose (NaCMC) gel microspheres (MCGM) with enhanced methylene blue (MB) adsorption capacity owing to the formation of a composite with MAL were synthesized by a sol-gel process followed by freeze-drying and using multivalent cations Al³⁺ as cross-linking agents. In addition, the effects of the MAL to NaCMC mass ratio, time, concentration, and pH on the adsorption of MB were explored. Benefiting from a sufficient number of active sites, MCGM exhibited an ultrahigh adsorption capacity for MB removal, and the maximum adsorption capacity was 118.30 mg/g. These results demonstrated the potential of MCGM for wastewater treatment applications.

Study on the thermal release characteristics and the correlation transformation mechanism of microscopic active groups of oxidized coal combustion in a deep mined-out area

With the normalization of deep mining, the risk of residual coal spontaneous combustion (CSC) in deeply mined areas has gradually increased. To investigate the thermal characteristics and microgroup transformation mechanisms during the secondary oxidation of deep-well oxidized coal, a deep-well oxidation process was simulated in a synchronous thermal analyzer, and the thermal parameters of the oxidized coal were tested. The correlated transformation pathways of microscopic active groups was studied by electron paramagnetic resonance (EPR) and in situ diffuse reflectance (in situ FTIR) experiments during the reoxidation of oxidized coal. The results showed that with increasing deep-well ambient temperature and oxidation temperature, the characteristic temperature of coal gradually decreased, exothermic heat release gradually increased, and active aliphatic structures and -OH, -CHO and other active functional groups gradually accumulated and became distributed more uniformly. When the thermal conditions and oxidation temperature were very high (> 160 °C), the active free radicals in the oxidized coal were rapidly consumed, resulting in a gradual decrease in the characteristic temperature and heat release during the secondary oxidation process, while the contents of peroxy and carboxyl groups continued to increase. In the slow oxidation stage of oxidized coal, methyl groups were mainly transformed with hydroxyl and peroxide groups (r > 0.96), and the associated oxidative consumption of -CHO and -COOH mainly occurred in the rapid oxidation stage (r > 0.99). Geminal diols and peroxy groups are important intermediates in the coal-oxygen composite reaction process. With an increase in the deep-well temperature and initial oxidation temperature, the reoxidation tendency and heat release capacity of residual coal in the goaf gradually increased, and the risk of CSC intensified. The research results provide a theoretical reference for the prevention and control of coal fires in deep mines and play an important role in guiding environmental management and gas emissions reduction measures in mining areas.

High-efficient capture and degradation of formaldehyde based on the electric-field-enhanced catalytic effect

Enhancing the generation of active groups is of great significance for alleviating the catalyst deactivation of formaldehyde (HCHO) by accelerating the decomposition of intermediate products. Herein, an electric-field-enhanced catalytic effect was proposed for the efficient capture and degradation of HCHO base on carbon cloth loaded manganese oxide catalyst (MnO_x-CC). Under the action of electric field, MnO_x can generate more hydroxyl radicals (•OH) and superoxide radicals (•O₂^-), thus accelerating the degradation of HCHO and intermediates at room temperature. After the introduction electric field (∼1 ×10⁴ V/m), •O₂^- and •OH radical on the surface of MnO_x-CC catalyst can be increased by 8 times and 23 times, respectively. At weight hourly space velocity of 300,000 mL/(g_cat h) for ∼15 ppm HCHO, MnO_x-CC-Electric Field catalyst reached the removal efficiency of 99.4%, and the CO₂ conversion efficiency of 81.2%, without decrease significantly within 80 h. Theoretical calculation shows that the electric field can increase the electron state density of Mn atom at the Fermi level and reduce the adsorption energy of HCHO, O₂ and H₂O, thus promoting the generation of active groups and degradation of intermediate products. The electric-field-enhancement catalytic effect provides a new approach for the degradation of Volatile Organic Compounds.

Experimental study on the effects of chemical composite additive on the microscopic characteristics of spontaneous combustion coal

In order to study the effects of chemical composite additive (CCA) on the microscopic characteristics of spontaneous combustion coal, atomic force microscope and Fourier transform infrared spectroscopy technology were used to study the microstructure and active groups of spontaneous combustion coal. The roughness, three-dimensional surface morphology, microscopic pore structure, infrared spectrum, and active group content of raw coal samples and coal samples treated with water or different concentrations of CCA were analyzed. The experimental results showed that compared with the raw coal, the roughness Rq and Ra of the CCA-treated coal samples decreased with increasing CCA concentration, and the surface topography of the microscopic structure tended to be flat and smooth, and the size becomes smaller and the depth becomes shallow of pore. In the raw coal samples and coal samples treated with water and CCA, the main types of active groups remained constant. However, the contents of these groups changed, and the order of the contents of main types of active groups is water-treated > raw coal (untreated) > CCA-1% treated > CCA-5% treated > CCA-10% treated > CCA-20% treated. In addition, the mechanism of the CCA inhibition of coal spontaneous combustion was discussed and analyzed.

Active site characterization and molecular cloning of Tenebrio molitor midgut trehalase and comments on their insect homologs

The soluble midgut trehalase from Tenebrio molitor (TmTre1) was purified after several chromatographic steps, resulting in an enzyme with 58 kDa and pH optimum 5.3 (ionizing active groups in the free enzyme: pK(e1) = 3.8 ± 0.2 pK(e2) = 7.4 ± 0.2). The purified enzyme corresponds to the deduced amino acid sequence of a cloned cDNA (TmTre1-cDNA), because a single cDNA coding a soluble trehalase was found in the T. molitor midgut transcriptome. Furthermore, the mass of the protein predicted to be coded by TmTre1-cDNA agrees with that of the purified enzyme. TmTre1 has the essential catalytic groups Asp 315 and Glu 513 and the essential Arg residues R164, R217, R282. Carbodiimide inactivation of the purified enzyme at different pH values reveals an essential carboxyl group with pKa = 3.5 ± 0.3. Phenylglyoxal modified a single Arg residue with pKa = 7.5 ± 0.2, as observed in the soluble trehalase from Spodoptera frugiperda (SfTre1). Diethylpyrocarbonate modified a His residue that resulted in a less active enzyme with pK(e1) changed to 4.8 ± 0.2. In TmTre1 the modified His residue (putatively His 336) is more exposed than the His modified in SfTre1 (putatively His 210) and that affects the ionization of an Arg residue. The architecture of the active site of TmTre1 and SfTre1 is different, as shown by multiple inhibition analysis, the meaning of which demands further research. Trehalase sequences obtained from midgut transcriptomes (pyrosequencing and Illumina data) from 8 insects pertaining to 5 different orders were used in a cladogram, together with other representative sequences. The data suggest that the trehalase gene went duplication and divergence prior to the separation of the paraneopteran and holometabolan orders and that the soluble trehalase derived from the membrane-bound one by losing the C-terminal transmembrane loop.