Long-term outcomes of titanium-nitride-oxide coated stents and drug-eluting stents in acute coronary syndrome: A systematic review and meta-analysis

BACKGROUND

In severe cases of coronary artery disease, percutaneous coronary intervention provide promising results. The stent used could be a drug-eluting stent (DES) or a titanium-nitride-oxide coated stent (TiNOS).

AIM

To compare the 5-year effectiveness and safety of the two stent types.

METHODS

The following systematic review and meta-analysis was conducted in accordance with the preferred reporting items for systematic reviews and meta-analysis guidelines, and PubMed/MEDLINE, Scopus, and Cochrane Central were searched from inception till August 2023. Primary outcomes were major adverse cardiac events (MACE), cardiac death, myocardial infarction (MI), cardiac death or MI, and ischemia-driven total lesion revascularization (ID-TLR).

RESULTS

Four randomized controlled trials (RCT), which analyzed a sum total of 3045 patients with acute coronary syndrome (ACS) after a median follow-up time of 5 years were included. Though statistically insignificant, an increase in the ID-TLR was observed in patients receiving TiNOSs vs DESs. In addition, MI, cardiac death and MI, and definite stent thrombosis (DST) were significantly decreased in the TiNOS arm. Baseline analysis revealed no significant results with meta-regression presenting non-ST elevated MI (NSTEMI) as a statistically significant covariate in the outcome of MACE.

CONCLUSION

TiNOS was found to be superior to DES in terms of MI, cardiac death or MI, and DST outcomes, however, the effect of the two stent types on ID-TLR and MACE was not significant. A greater number of studies are required to establish an accurate comparison of patient outcomes in TiNOS and DES.

Endovascular Treatment of Arterial Steno-Occlusive Lesions in Symptomatic Moyamoya Disease

The efficacy and safety of endovascular treatment (EVT) for moyamoya disease (MMD) have rarely been investigated. The objective of this study was to summarize the clinical outcomes of EVT for MMD and determine the potential role of EVT in treating symptomatic steno-occlusive lesions in MMD. Reports from January 2000 to December 2021 describing EVT in MMD were collected through a literature search. The search terms included “moyamoya”, “stent”, “angioplasty”, and “endovascular”. Data regarding baseline demographics, previous medical history, treated vessel, periprocedural complications, and angiographical recurrence were retrieved. This review included 10 studies with details of 19 patients undergoing a total of 31 EVT procedures. Twenty-one EVTs were performed as initial treatments for MMD, and 10 were performed as additional treatments for angiographical recurrence. The mean follow-up period of the initial EVTs was 9.0±11.9 months, with angiographical recurrence in 11 (68.8%) cases. The mean follow-up period of additional EVTs was 4.3±3.9 months, and seven (70.0%) EVTs showed restenosis of the re-treated vessel. Across all initial and additional EVTs, there were no differences in characteristics between the recurrence and non-recurrence groups. Overall, two periprocedural complications (9.5%) occurred, one vessel rupture and one massive intracerebral hemorrhage with subarachnoid hemorrhage. EVT plays a limited role in the management of symptomatic intracranial arterial steno-occlusive lesions of MMD. Recent advances in understanding the pathomechanism of MMD may urge neuro-interventionists to find a new endovascular approach with better balloon angioplasty or stenting mechanisms.

Polypropylene mesh combined with electrospun poly (L-lactic acid) membrane in situ releasing sirolimus and its anti-adhesion efficiency in rat hernia repair

This study developed, a novel polypropylene (PP) mesh combined with poly (L-lactic acid) (PLA) electrospun nanofibers loaded sirolimus (SRL). The PP mesh was combined with PLA/SRL (1/0, 1/0.01, 1/0.02; mass ratios) composed electrospun membrane characterized by FTIR spectroscopy, XPS and SEM, and evaluated for cytocompatibility in vitro. In an in vivo study, a total of 84 Sprague-Dawley rats were employed to evaluate the efficacy of the novel composite PP mesh anti-adhesion, mechanical properties and inflammation. As a results, the PLA/SRL membrane could compound with PP mesh stably and load SRL. Although tensile testing showed that the mechanical properties of composite mesh decreased in vivo, the integration strength between the tissue and mesh was still able to counteract intra-abdominal pressure. Compared with the native PP mesh group, the novel PP mesh group showed a lower score for abdominal adhesion and inflammation. More importantly, the novel PP mesh completely integrated with the abdominal wall and had sufficient mechanical strength to repair abdominal wall defects.

The Exploration of a Novel Biodegradable Drug-Eluting Biliary Stent: Preliminary Work

PURPOSE

To explore the degradation, drug release, and mechanical properties of drug-incorporated films made of different ratios of poly(lactic-co-glycolic acid) (PLGA) and different amounts of paclitaxel (PTX), which may serve as the material platform for the manufacturing of biodegradable drug-eluting biliary stents.

MATERIALS AND METHODS

PLGA of different lactic acid/glycolic acid ratios (50/50, 70/30, and 80/20) and 0%, 10, 20, and 30% weight by weight (w/w) PTX was mixed to make PLGA films, which were then cut into small pieces for further testing. Films were immersed in phosphate-buffered saline (pH 7.4) for a maximum of 11 weeks. Samples were taken randomly at Day 2, 4, 6, 8, 10, 12, 14, and weekly thereafter until Week 11 to test tensile strength, weight loss, pH value of the soaking solution, and drug release. The morphology of films was observed using scanning electron microscope (SEM).

RESULTS

At Week 10 of degradation, PLGA 80/20 still withstood a tensile strength of 9.7 newton (N), while PLGA 50/50 and 70/30 cracked spontaneously since Day 4. At Week 11, weight loss of PLGA 50/50, 70/30, and 80/20 was 95.15, 82.32, and 16.17%, respectively; and the lowest pH value of soaking solution was 1.87, 1.95, and 6.58, respectively. Drug release of 10, 20, and 30% PTX groups was 3.52-4.48%, 1.90-2.26%, and 1.44-2.06%, respectively. SEM proved smooth films before degradation; however, after the tensile strength was lost, cracks could be seen.

CONCLUSION

The degradation rate of PLGA can be controlled by altering lactic acid/glycolic acid ratio. Overall, PLGA 50/50 and 70/30 degrade significantly faster than 80/20. PLGA can serve as an effective drug carrier for PTX while being the stent strut, and PTX can be slowly released as PLGA degrades.

Drug eluting implants in pharmaceutical development and clinical practice

Introduction: Drug eluting implants offer patient convenience and improved compliance through less frequent dosing, eliminating repeated, painful injections and providing localized, site specific delivery with applications in contraception, ophthalmology, and oncology.Areas covered: This review provides an overview of available implant products, design approaches, biodegradable and non-biodegradable polymeric materials, and fabrication techniques with a focus on commercial applications and industrial drug product development. Developing trends in the field, including expanded availability of suitable excipients, development of novel materials, scaled down manufacturing process, and a wider understanding of the implant development process are discussed and point to opportunities for differentiated drug eluting implant products.Expert opinion: In the future, long-acting implants will be important clinical tools for prophylaxis and treatment of global health challenges, especially for infectious diseases, to reduce the cost and difficulty of treating chronic indications, and to prolong local delivery in difficult to administer parts of the body. These products will help improve patient safety, adherence, and comfort.

Designing Better Cardiovascular Stent Materials - A Learning Curve

Cardiovascular stents are life-saving devices and one of the top 10 medical breakthroughs of the 21st century. Decades of research and clinical trials have taught us about the effects of material (metal or polymer), design (geometry, strut thickness, and the number of connectors), and drug-elution on vasculature mechanics, hemocompatibility, biocompatibility, and patient health. Recently developed novel bioresorbable stents are intended to overcome common issues of chronic inflammation, in-stent restenosis, and stent thrombosis associated with permanent stents, but there is still much to learn. Increased knowledge and advanced methods in material processing have led to new stent formulations aimed at improving the performance of their predecessors but often comes with potential tradeoffs. This review aims to discuss the advantages and disadvantages of stent material interactions with the host within five areas of contrasting characteristics, such as 1) metal or polymer, 2) bioresorbable or permanent, 3) drug elution or no drug elution, 4) bare or surface-modified, and 5) self-expanding or balloon-expanding perspectives, as they relate to pre-clinical and clinical outcomes and concludes with directions for future studies.

Drug-eluting versus bare metal stent in treatment of patients with saphenous vein graft disease: A meta-analysis of randomized controlled trials

Drug-eluting stent (DES) and bare metal stent (BMS) are effective treatments for preventing vascular disease, but whether using DES is associated with positive clinical outcomes compared with BMS in patients with saphenous vein graft disease (SVGD) has not been established. Three electronic databases including PubMed, EmBase, and the Cochrane Central Register of Controlled Trials were searched to identify potentially includible studies. We did a random-effects meta-analysis of randomized controlled trials (RCTs) to obtain summary effect estimates for the clinical outcomes with the use of relative risk calculated from the raw data of individual trial. Among 812 patients from 4 RCTs, DES was associated with lower risk of short-term major cardiovascular events (MACEs) when compared with BMS, whereas no significant effect on the risk of long-term MACEs. Furthermore, there was no significant difference between DES and BMS for short-term myocardial infarction (MI) and long-term MI. Similarly, DES was not associated with risk of short- and long-term mortality risk as compared with BMS. In addition, DES has no significant effect on the risk of cardiac death and stent thrombosis. Finally, DES therapy significantly reduced the risk of TLR, TVF, and TVR. SVGD patients received DES can minimize the risk of short-term MACEs, TLR, TVF, and TVR when compared with BMS. However, it does not effect on the incidence of long-term MACEs, MI, mortality, cardiac death, and stent thrombosis.

Drug-eluting metallic stents in urology

Drugeluting metal stents (DESs) have been extensively used in coronary and vascular disease. This type of stents has been proven to provide significantly lower restenosis rates due to the reduction of neo-intimal hyperplasia in comparison to the traditionally used bare metal stents (BMSs). The latter stents have been evaluated for more than a decade in urological practice in an attempt to provide permanent relief of urethral or ureteral obstruction. Although the initial results were promising, long-term experience revealed significant complications, which are mainly attributed to stent-related hyperplastic reaction compromising stent patency. The favorable experience of vascular DESs led to the application of DESs in both the urethra and ureter of animal models. These experimental results demonstrated a reduction of hyperplastic reaction of DESs in comparison to BMSs. Nevertheless, clinical data are currently not available. Considering the fact that DESs are under continuous development, the use of DESs in urology holds promise for the future and seems to be an intriguing field.